Commit Graph

56722 Commits

Author SHA1 Message Date
sato 5eba2f8c9b if rtc_offset is 0, rtc_offset inherit WindowsCE timezone. 1999-11-04 09:39:10 +00:00
joda dbfcb792e1 add Xircom X3201-3 Fast Ethernet Controller 1999-11-04 09:38:38 +00:00
jonathan 0588cdfc88 Update user-level PPS-API to match -05 draft.
Change PPS_<xxx> ioctls to PPS_IOC_<xxx>.
1999-11-04 05:33:58 +00:00
mrg bd0928e723 find "SUNW,hme" as well as "hme". this matches the onboard
ultra2 hme.  haven't actually tested this beyond it probing
because my scsibus is hanging.  anyway, it reports:

hme0 at sbus0 slot 14 offset 0x8c00000 vector 21 ipl 6: address 08:00:20:8f:7f:8f
1999-11-04 05:31:38 +00:00
sato 829c8ef0f2 GENERIC_JP include GENERIC. 1999-11-04 04:58:25 +00:00
simonb 986464bd89 Remove duplicate line. 1999-11-04 02:53:03 +00:00
erh 6752f572d8 Remove ELFNAME defines since they are defined in sys/exec_elf.h 1999-11-04 02:00:17 +00:00
thorpej 97bbad1f0b Do rd/line and rd/mult on the MX98725 and LC82C115, too. 1999-11-04 01:27:32 +00:00
thorpej e3f20e8ff1 Use Memory Read Line and Memory Read Multiple on the 21140, 21140A,
21142, and 21143, if the PCI bus says its okay.
1999-11-04 01:20:55 +00:00
perry 6c24c0b16b update to reality 1999-11-04 01:13:31 +00:00
thorpej a4e1bde0b3 Print out if the read {line,multiple} and write/invalidate commands are
okay to use.
1999-11-04 01:03:34 +00:00
thorpej 1825cdf45b Tell the PCI layer that Memory Read Line, Memory Read Multiple, and
Memory Write and Invalidate are okay PCI commands to use.
1999-11-04 01:02:38 +00:00
thorpej ca9b9a3b2e Adapt to mii_phy_probe() change. 1999-11-04 00:24:00 +00:00
thorpej bedeeb9896 Allow mii_phy_probe() to be called multiple times, and allow the caller
to specify either the PHY number or the PHY `offset' (1st, 2nd, 3rd, etc.)
to configure.
1999-11-04 00:22:07 +00:00
thorpej 3750d3f592 Update for ifmedia changes. 1999-11-03 23:07:10 +00:00
thorpej e19c356e76 Make the ifmedia_entry list a TAILQ. This is pretty much for cosmetics
(media added to tail, so that when e.g. the list is run to print out
what media exist, they appear in-order).
1999-11-03 23:06:35 +00:00
augustss 1e460723a5 Don't flag an error when doing ioctl() on a mux without any
multiplexees.  Should fix PR 8723.
1999-11-03 22:48:38 +00:00
thorpej bc82bff1dc Don't add any loopback versions of media, for now. 1999-11-03 22:32:45 +00:00
thorpej 8fc600c3b1 Clean up the code that adds media a little, and make media selection
table-driven in preparation for some other changes to be made.
1999-11-03 22:30:32 +00:00
thorpej e017601bd3 More or less completely rewrite the way DECchip media is handled, and
add support for the DECchip 21142/21143 SIA/SYM media.  Make the Macronix
98713 behave like a 21140A, and the 98713A and later behave like a 21143.
Nuke all of the Macronix-specific Nway code, as it will be identical to
the 21143 Nway code once it is written.
1999-11-03 22:25:08 +00:00
thorpej eb16cd3aa7 Define DECchip 21142/21143 register bits, and since the Macronix chips
are nearly perfect 21143 clones, delete a bunch of redundant info in that
section of the file.
1999-11-03 22:22:49 +00:00
mycroft 9a6b48c680 Fix compilation error due to cpp headaches. 1999-11-03 22:13:20 +00:00
castor a95e913325 Fix spelling typos. 1999-11-03 22:01:40 +00:00
ragge 94b8f863fa Don't use structs for BI space definitions, use offsets. 1999-11-03 21:57:40 +00:00
hwr 51515f302b Fix bogus section header. From PR 8735. 1999-11-03 21:45:57 +00:00
hwr e00fb667a6 Change bogus section headers. From PR 8735. 1999-11-03 21:44:37 +00:00
matt 31ba134e32 use __vax__ and __i386__ instead of vax and i386 1999-11-03 20:50:17 +00:00
mycroft b2ecb4ad21 In copy*str(), explicitly check for maxlen==0, rather than implicitly making it
act like 2^32.

Tested by: simonb
1999-11-03 16:21:22 +00:00
chs f13d3f5b3b from jason:
avoid biodone()ing the original buf twice when a component buf
gets an error.  fixes PR 8704.
1999-11-03 16:04:03 +00:00
mycroft d2b362b685 Only update the cursor state if it's enabled. 1999-11-03 15:55:27 +00:00
chs b2eeefd2b9 mycro-optimization (ie. from charles). 1999-11-03 15:32:45 +00:00
enami 144cdf4dd7 Use tabs to indent. 1999-11-03 14:55:53 +00:00
mycroft 4f1f2c6398 Fix silly error that caused the secondary channel to be ignored if the primary
channel was disabled.
1999-11-03 14:54:07 +00:00
wennmach 8d67a1ce88 Fix a documentation bug in this man page: The Gregorian Reformation in Great
Britain and its colonies eliminated 11 days (not 10), following
September 2, 1752.

From "A.D. 1751. Anno vicesimo quarto GEORGII II. CAP. XXIII.
      An Act for Regulating the Commencement of the Year; and for
      Correcting the Calendar now in Use.":

"... and that the natural Day next immediately following the said 2nd Day of
 *September* [1752], shall be called, reckoned and accounted to be the 14th
 Day of *September*, omitting for that Time only the 11 intermediate nominal
 Days of the common Calendar;

 and that the several natural Days, which shall follow and succeed next after
 the said 14th Day of *September*, shall be respectively called, reckoned and
 numbered forwards in numerical Order from the said 14th Day of *September*,
 according to the Order and Succession of Days now used in the present
 Calendar; "

Added a caution note on using cal for very old dates.

Problem mentionned in PR 5215 by John Franklin (franklin@bev.net).

Thanks to Perry Metzger for his comments and for reviewing this man page.
1999-11-03 14:32:25 +00:00
jdolecek 34eaf12c8f adapt to latest scsipi changes
XXX this is not tested, but should be okay
1999-11-03 14:16:33 +00:00
jdolecek 9c9df2bf71 adapt to latest scsipi changes
XXX this is not actually tested, but should be okay
1999-11-03 14:12:19 +00:00
leo ae6f700f60 Regenerated. 1999-11-03 14:10:40 +00:00
enami 60ba1b7481 Do options<space><tab> magic. 1999-11-03 14:09:53 +00:00
leo 165e56a44b Add the audio devices. 1999-11-03 14:02:07 +00:00
enami 022e07f47f make sure to sync mask bit and array index. 1999-11-03 13:55:41 +00:00
takemura c3db78c27f Always override color table. 1999-11-03 13:48:07 +00:00
ad 0f1d754327 QIOCGMAP is what I like to call QIOCGINFO during my more confused moments,
but other people can't be expected to know that. Noted by mhitch.
1999-11-03 13:45:11 +00:00
mycroft 3c702c1d8d Recognize the 3c595, and use `ex' for 3c90x now. 1999-11-03 12:38:54 +00:00
augustss 3b576cc6b2 Update. 1999-11-03 12:11:26 +00:00
pk 2b83e06e71 Reduce block size in dd command to 4K; this should make the blocking factor
ok when reading from a pipe.
1999-11-03 12:03:32 +00:00
is 94efbddebd Check for invalid component numbers (wrong hex "digits", octal numbers
with digits of 8 or 9) and complain. Fixes PR 8314 by ITOH Yasufumi (but
adding the check of hexadecimal numbers).
1999-11-03 11:47:02 +00:00
shin 59131de0d3 add rasops15, rasops16 to fb 1999-11-03 11:40:58 +00:00
sjg a1a63dafa0 fixed reference to NetBSD version 1999-11-03 11:27:29 +00:00
mycroft dfc00b5b24 Back out the GDT changes in the previous. Didn't mean to commit that. 1999-11-03 09:55:32 +00:00
mycroft 1ee8f66dfe Picking a few nits...
* The direction flag wasn't set right in the presence of ROMDEBUG.
* There were missing data32's.
* We weren't as careful as we should be with relocations.
1999-11-03 09:28:15 +00:00