andrew
e256404adc
Cyclades Cyclom-{4/8/16}Y multiport async serial board driver.
1993-10-06 09:30:16 +00:00
andrew
13a48b8263
Goes with the new cy driver.
1993-10-06 09:27:27 +00:00
cgd
a92b57431b
make nbuf = bufpages, now that vfs_bio can do the rational thing.
1993-10-04 04:57:09 +00:00
cgd
174c25bd21
add mmmmap (mem device mmap routine). possible problems:
...
(1) the 'physmem' constant has a value which i don't think is
correct
(2) not sure what happens if you mmap a region of kmem which is
not in the kernel's address space...
1993-10-02 00:16:24 +00:00
mycroft
ee70c53e3f
Display a less cryptic message when the ring buffer overflows.
1993-10-01 23:12:04 +00:00
mycroft
f969ea9aa8
Fix probe routine to work for multiple controllers.
1993-10-01 23:07:27 +00:00
mycroft
018d1230b2
Read ethernet address correctly on NE1000 boards.
1993-10-01 22:59:57 +00:00
mycroft
4d4bfb2287
*** empty log message ***
1993-10-01 04:00:45 +00:00
davidg
892a4681ae
* Revision 2.5 93/09/30 17:44:14 davidg
...
* patch from vak@zebub.msk.su (Serge V.Vakulenko) to work around
* a hardware bug in cheap WD clone boards where the PROM checksum
* byte is always zero
*
* Revision 2.4 93/09/29 21:24:30 davidg
* Added software NIC reset in NE probe to work around a problem
* with some NE boards where the 8390 doesn't reset properly on
* power-up. Remove initialization of IMR/ISR in the NE probe
* because this is inherent in the reset.
*
* Revision 2.3 93/09/29 15:10:16 davidg
* credit Charles Hannum
*
* Revision 2.2 93/09/29 13:23:25 davidg
* added no multi-buffer override for 3c503
*
* Revision 2.1 93/09/29 12:32:12 davidg
* changed multi-buffer count for 16bit 3c503's from 5 to 2 after
* noticing that the transmitter becomes idle because of so many
* packets to load.
*
* Revision 2.0 93/09/29 00:00:19 davidg
* many changes, rewrites, additions, etc. Now supports the
* NE1000, NE2000, WD8003, WD8013, 3C503, 16bit 3C503, and
* a variety of similar clones. 16bit 3c503 now does multi
* transmit buffers. Nearly every part of the driver has
* changed in some way since rev 1.30.
1993-10-01 02:01:43 +00:00
mycroft
e57ef97529
Add LKM.
1993-09-30 20:15:25 +00:00
mycroft
83f32ad82b
Add needs-flag (or needs-count for tty devices) to all driver in the
...
switch tables. Remove ancient ethernet drivers.
1993-09-30 20:14:55 +00:00
mycroft
845512b39a
TEST: Enable com ports.
...
files.i386.newconf: Add needs-count to com.c for now.
1993-09-30 17:30:32 +00:00
mycroft
81c776a8e4
Enable mms.
1993-09-29 15:24:41 +00:00
mycroft
c27a6e4acf
Fix TIMEZONE specs; add DST.
1993-09-29 06:57:10 +00:00
mycroft
5085e2ca53
files.i386: Defunct.
...
files.i386.newconf: Remove lpa.
TEST: Enable lms and lpt.
*: Change all lpa's to lpt's. Change fd[0-3] to fd* and wd[0-3] to wd*.
Remove all explicit irq's.
1993-09-29 05:37:29 +00:00
cgd
ff24138e60
get rid of an "#if 0", and allocate buffers here.
1993-09-29 04:51:12 +00:00
cgd
4a21fe3648
ifdef out the ttyfree()'s, so that fill_eproc doesn't panic when
...
a process's session still holds a ref to a tty which has been deallocated
and reused.
1993-09-29 02:36:21 +00:00
cgd
b85a24ec4e
get rid of stray printfs (turn them into "lprintf"s)
1993-09-28 21:26:59 +00:00
mycroft
cd216b5938
Make Ctrl-Space input a NUL and Ctrl-/ input a ^/ (undo in Emacs).
1993-09-28 04:55:17 +00:00
andrew
ef83446787
Exports the pccons ioctls.
1993-09-28 03:26:17 +00:00
andrew
ceb2a05027
Added keyboard typematic rate adjustment ioctl. Rudimentary support for
...
entering DDB from X11 by means of the F12 key (when XSERVER_DDB is
defined).
1993-09-28 03:25:01 +00:00
jtc
e7ecd24ac3
Do not provide quad constants if compiling in a strict ansi or a strict
...
posix environment.
1993-09-24 18:22:31 +00:00
mycroft
06c199bb44
Renamed from clock.h.
1993-09-24 09:04:56 +00:00
mycroft
054e0b73bc
clock.c: Finish conversion. Make rtcput() work if VRT bit not set. Speed up
...
time conversion in delay().
fd.c: Minor changes to autoconfig. Use dv_parent rather than storing another
pointer to the fdc_softc in each fd_softc. Change disk label stuff for our
kernel.
icu.s: Make splx() and splnone() return previous cpl for now.
isa.c: Minor autoconfig changes.
isa.h: rtcin() is now nvram() and is declare in nvram.h. Make isaphysmem a
caddr_t.
pccons.c: XXXX: Maybe we should insist they open /dev/io now.
timerreg.h: #define TIMER_NPORTS.
wd.c: Delete unused wdnoreloc() and wddospart(), and use remaining two bits in
unit number. struct disk --> struct wd_softc. struct board --> struct
wdc_softc. Still needs much work.
1993-09-24 08:49:21 +00:00
mycroft
3540378534
GENERIC, TEST: Remove all irqs.
...
std.i386: Re-add clock0 and timer0.
1993-09-24 08:45:03 +00:00
cgd
2dc346f0d1
add accounting
1993-09-23 21:31:56 +00:00
brezak
4212e64961
Include sys/signal.h instead of machine/signal.h
1993-09-21 20:51:12 +00:00
brezak
b54c7ce913
Be sure to get sys/signal.h
1993-09-21 13:43:15 +00:00
brezak
a9f5756dd2
In resettodr() handle rtcget() failure.
1993-09-21 13:09:10 +00:00
brezak
39804a17e5
Remove unneeded saving of segment regs for USER_LDT.
1993-09-21 13:08:34 +00:00
brezak
d0b8b43cf2
Add USER_LDT option.
1993-09-19 19:11:24 +00:00
brezak
42f1476a71
Changes for per-process/user settable LDT and full sigcontexts
1993-09-19 19:00:44 +00:00
brezak
90add535c9
Add tISP offset
1993-09-19 18:59:35 +00:00
brezak
a3e9fd6947
Add per-process LDT slot.
1993-09-19 18:59:17 +00:00
brezak
044ac34c5a
Define signal frame here.
1993-09-19 18:58:39 +00:00
brezak
66f540572a
Defines architecure dependant syscalls.
1993-09-19 18:58:14 +00:00
brezak
5413da0ff5
Machine dependant signal.h. Defines sigcontext and sig_atomic_t for i386 port.
1993-09-19 18:57:48 +00:00
cgd
0145d113ae
get rid of the #ifndef KERNEL around the include of sys/cdefs.h,
...
a la 4.4, because it seriously breaks things otherwise, given
inclusion of endian.h in types.h
1993-09-17 01:44:08 +00:00
mycroft
a46b224043
Add constants for quad support.
1993-09-16 06:01:11 +00:00
mycroft
111aecd0a9
Add an #ifndef _POSIX_SOURCE...
1993-09-16 05:59:43 +00:00
brezak
cb098b5eb0
Changes to use a trap frame for syscalls.
1993-09-16 03:24:13 +00:00
mycroft
606544f20d
Add _QUAD_HIGHWORD and _QUAD_LOWWORD for Torek's quad stuff.
1993-09-16 02:25:45 +00:00
cgd
a3b397dd18
compile boot blocks with -O6. this makes them "fit". this is sick.
1993-09-15 22:17:54 +00:00
brezak
ff02097496
No need to lospecifiy load address at 1M, now the default for any kernel.
1993-09-14 20:01:19 +00:00
mycroft
fd156a97fa
New i386 code.
1993-09-14 17:28:06 +00:00
brezak
5823e758f1
Remove SYMTAB_SPACE from config so that boot symbols are used.
1993-09-13 18:19:26 +00:00
brezak
7d2eb9e6b6
Default LOAD_ADDRESS at 0xfe100000 (1M)
1993-09-13 15:28:23 +00:00
brezak
b119f3ec4f
Add MACHINE_NONCONTIG option
1993-09-13 14:22:42 +00:00
jtc
c3f643cd8a
Remove NEED_* defines, as they are now satisfied by libkern.
1993-09-11 00:16:40 +00:00
jtc
0d2e8f0fcb
Link with libkern.
1993-09-11 00:14:13 +00:00
jtc
cab4d78107
Removed functions moved to libkern: strcpy, strlen, ffs, etc.
1993-09-11 00:12:56 +00:00
mycroft
c87683c012
Make various macros work if outb() is being inlined.
1993-09-09 15:16:14 +00:00
davidg
1c880d62bf
As of this revision, all known bugs have been fixed. Some of the fixes include:
...
1) fixed 3c503 lock-up if the thinwire cable was disconnected at boot time
2) 8013EBT boards now work (quite well!) in 16bit/16k mode
3) ED_NO_DOUBLE_BUFFERING flag now works
4) slightly higer performance (about 3%) with 16bit WD/SMC boards
5) support for WD8013WC (10BaseT) boards
Additionally, the probe code has been reorganized to be much cleaner. This
revision of the driver is 1.25. The release notes have been updated as well.
1993-09-09 09:40:56 +00:00
jtc
aabddf622f
STDC -> __STDC__
1993-09-08 16:55:17 +00:00
mycroft
6409dcaef1
Trivial stylistic change.
1993-09-07 07:35:41 +00:00
mycroft
0230178143
Clean up deleted files.
1993-09-07 02:25:20 +00:00
deraadt
a6b1318c68
Adding the (non-optional) option MACHINE_NONCONTIG
1993-09-07 00:56:05 +00:00
mycroft
515949e42e
Add a bunch more shit that was missing.
1993-09-07 00:36:27 +00:00
mycroft
5be4167214
Rearrange SCSI probing to actually work.
1993-09-07 00:25:50 +00:00
mycroft
0dc9a11469
Rearrange ethernet probing in the vain hope that maybe, just maybe, the ne0
...
probe's effect on ed0 will be reversed when the latter is reset.
1993-09-06 23:35:19 +00:00
mycroft
8c7f0d2e48
Comment out we0 and ec0, and add equivalent ed0 and ed1.
1993-09-06 23:31:33 +00:00
mycroft
5e532f3f9f
Add a generous dose of comments.
1993-09-06 23:29:33 +00:00
mycroft
07e57f53a2
Put back printf() for entry point. It certainly fits.
1993-09-06 22:09:45 +00:00
mycroft
a75978c2e0
Change NFS' to
NFSSERVER,NFSCLIENT'.
1993-09-06 21:15:56 +00:00
mycroft
229a34c6b3
Correct I/O ports for mice.
1993-09-06 18:37:56 +00:00
mycroft
0535b6089e
Avoid clash of struct ns_addr with #define ns_addr.
1993-09-06 18:30:39 +00:00
mycroft
84c634662f
Move the `#include "bpfilter.h"' to a more logical and easy to find place.
1993-09-06 18:27:22 +00:00
mycroft
bec04754dc
Update for new select(), and fix another `struct arpcom.ac_enaddr'.
1993-09-06 18:24:35 +00:00
mycroft
91b8683f3e
Make Ctrl-Space and Ctrl-2 send a NUL, even without XSERVER defined.
...
(This has annoyed me for a while, and people are complaining about it.)
1993-09-06 05:52:33 +00:00
mycroft
9cd4c25c2a
Second wd0 should be wd1.
1993-09-05 22:34:12 +00:00
mycroft
59d53ecfbf
Check some boundary conditions is cursor movement and scrolling.
1993-09-05 17:56:58 +00:00
deraadt
7c8271a011
I give up. Clearly, SYMTAB_SPACE is required at the moment to build a
...
kernel that doesn't go foom in locore.s
1993-09-05 16:42:54 +00:00
sef
b477be52eb
Yet more of the ptrace() reorg; now ptrace_setregs() and ptrace_getregs()
...
are present, along with PT_GETREGS and PT_SETREGS ptrace commands.
1993-09-05 03:53:52 +00:00
cgd
9840b0b7af
update for new exec; a few name changes and (*gasp*) addition of comments.
1993-09-05 01:31:39 +00:00
cgd
59a008c712
change maximum stack size to 8M.
1993-09-04 22:21:28 +00:00
cgd
3aa99f85dc
better ptrace() support from Sean Eric Fagan <sef@kithrup.com>
1993-09-04 05:32:18 +00:00
cgd
37e8d5291e
get rid of bogosities of the form "vm_maxsaddr + MAXSSIZ", and replace
...
them with USRSTACK. the former was a hack by wfj to accomodate his screwy
execve() implementation. the latter is a (minor) reversion to net/2.
1993-09-04 01:29:22 +00:00
cgd
2403a33987
decouple MAXDSIZ and MAXSSIZ. MAXSSIZ now is 2M; shouldn't need more,
...
and saves time in exec.
1993-09-04 00:38:47 +00:00
jtc
4475f55d8f
Include systm.h to get prototypes (and possibly inlines) of *max functions.
1993-09-04 00:02:48 +00:00
cgd
c10d5aa752
get rid of bogus #define of resettodr(); now setting time actually works!
1993-09-02 02:10:35 +00:00
mycroft
73c9dd61b0
Add ed2, as per GENERICAHA.
1993-09-01 05:36:33 +00:00
mycroft
3db4b24245
Add ed2 at 0x300, irq 10, 0xcc000, which people can configure by hardware.
1993-09-01 02:31:10 +00:00
brezak
5bce7d4176
Add prototype for pmap_bootstrap().
1993-08-30 18:09:57 +00:00
deraadt
86d51ac6f8
pagers are not options, not pseudo-devices
1993-08-30 07:07:53 +00:00
deraadt
9aed375ba3
tty XXstart() routines return void
1993-08-29 13:46:31 +00:00
brezak
aaf4f8dbc5
Changes for boot loading of symbols.
1993-08-29 12:48:10 +00:00
mycroft
d48a7d8497
There is no longer any good reason to allocate a small number of ptys.
...
Increased to 32 so people will not bitch at me next time around.
1993-08-29 01:54:22 +00:00
cgd
468c5f5158
put PROCFS in pain...
1993-08-28 11:00:35 +00:00
brezak
966d7491cc
Changes: Boot omagic kernels (like Mach), pass cnvmem, extmem, and esym args, load symbol table into memory, enable kbd clock.
1993-08-28 01:18:43 +00:00
brezak
534b51feac
Declare find_isadev() function.
1993-08-28 00:13:55 +00:00
brezak
62164fe535
Add find_isadev() and have sysbeep() use common defines.
1993-08-28 00:13:00 +00:00
brezak
548e9c5a3f
Remove warnings.
1993-08-28 00:11:33 +00:00
brezak
db43439bb0
i386 Machine dependant changes to handle non-contiguous memory.
1993-08-28 00:02:45 +00:00
brezak
a54d809cd8
Need LOAD_ADDRESS for depend pass.
1993-08-27 23:58:20 +00:00
brezak
42484186e9
Load at 1M and turn-on MACHINE_NONCONTIG option.
1993-08-27 23:55:28 +00:00
brezak
4aca3365cc
i386 Machine dependant changes to handle non-contiguous memory.
1993-08-27 23:52:22 +00:00
deraadt
538e35852c
ugh.
1993-08-26 09:52:16 +00:00
cgd
225917bfe6
0.9 "official" patch 001:
...
(1) added support for ed1 in both generic kernels at:
device ed1 at isa? port 0x250 net irq 9 iomem 0xd8000 vector edintr
(2) brought if_ed.c up to DG's 1.19 rev.
1993-08-26 00:26:50 +00:00
mycroft
c5e6262e4e
Add ACCOUNTING and GATEWAY options.
1993-08-24 21:39:35 +00:00
cgd
4543c1ebfd
changes from 0.9-ALPHA2 to 0.9-BETA
1993-08-23 04:59:38 +00:00
jtc
c41b22b4f6
Removed CLK_TCK, it's value is not machine dependant.
...
It's supposed to be defined in <time.h>, not <limits.h> anyway.
1993-08-18 00:22:44 +00:00
jtc
35fdf4ad74
Declare ntohl, ntohs, htonl, and htons functions.
...
Use GCC's inline assembly iff we are using GCC.
Use bswap instruction if using gcc and defined(KERNEL) &&
((defined(I486_CPU) || defined(I586_CPU)) && !defined(I386_CPU))
1993-08-16 18:30:35 +00:00
deraadt
af6c95dd23
sigh..
1993-08-14 07:31:28 +00:00
deraadt
3604916e13
ppp from paul mackerras
1993-08-14 06:29:28 +00:00
mycroft
38239524ee
Absolutely unimportant change to RCS identifier stuff.
1993-08-14 01:29:36 +00:00
deraadt
4ed4b0d387
delete a reference to the old 'as' device driver.
1993-08-10 08:42:25 +00:00
deraadt
342e987d36
Theo runs ppp
1993-08-10 04:01:03 +00:00
cgd
e5ea45d312
there are some devices out there which use... NO I/O PORTS!
1993-08-08 09:54:23 +00:00
cgd
cd56dd1638
merge in changes from netbsd-0-9-ALPHA2
1993-08-07 07:53:27 +00:00
mycroft
d7080696e9
Put RCS ids back...
1993-08-04 00:42:51 +00:00
mycroft
63c0a317bb
Add ALIGNBYTES for new fts().
1993-08-03 21:51:10 +00:00
brezak
f21b797b62
Bring to rtc clock code from Mach. Provides resettodr().
1993-08-03 12:33:17 +00:00
mycroft
4e1ade1731
Further cleanup. Remove IDXSHIFT in favor of using PGSHIFT and an indexed
...
load. (Same code size but faster.)
1993-08-03 07:03:01 +00:00
mycroft
a2a26e452b
Make coding style a little more consistent and cleanup some constants.
1993-08-03 06:34:35 +00:00
mycroft
27ba85335c
Emit KERNBASE.
1993-08-03 06:33:55 +00:00
mycroft
03302d8a3a
Fix bogus use of splx() in is_reset().
1993-08-03 05:06:49 +00:00
mycroft
c12fc78e87
Nuke RCS log.
1993-08-03 05:06:26 +00:00
glass
015cae18dd
more /* in comment warning fixes. in this case it looks like something
...
was cut and pasted badly :)
1993-08-03 01:53:36 +00:00
glass
4a385c1228
with -Wall would bomb, on incomplete type 'selinfo'. bpfilter.h include
...
moved down, and select.h included.
1993-08-03 01:52:57 +00:00
mycroft
65456d9ca0
Add a panic() after the swtch() is cpu_exit() just in case, and to shut up
...
GCC.
1993-08-02 23:20:55 +00:00
mycroft
da7f7e95b4
Put in a gratuitous cast to shut up GCC 2.
1993-08-02 23:19:18 +00:00
mycroft
52efca41cd
Nuke remaining patchkit headers.
1993-08-02 18:17:24 +00:00
mycroft
aee4b07b8a
Add RCS identifiers, remove some completely useless RCS logs and patchkit
...
headers, and a few other insignificant changes.
1993-08-02 17:48:44 +00:00
mycroft
4862b84c92
Add RCS identifiers (this time on the correct side of the branch), and
...
incorporate recent changes in netbsd-0-9 branch.
1993-08-01 19:22:24 +00:00
mycroft
804be109a6
Feep.
1993-08-01 00:32:27 +00:00
mycroft
690cae8181
Add RCS indentifiers.
1993-07-31 15:17:49 +00:00
jtc
3643c134f1
Change "#endif FOO" to "#endif /* FOO */", to keep gcc -Wall, lint, etc.
...
from complaining about a trivial issue.
1993-07-29 21:42:19 +00:00
cgd
7b2afa7fe6
incorporate changes from 0-9-base to 0-9-ALPHA
1993-07-28 02:20:34 +00:00
brezak
b74ddcc84b
Allow one to fault in DDB and survive.
1993-07-22 13:04:45 +00:00
brezak
556176fc24
Call ddb_init instead of kdb_init.
1993-07-22 13:04:21 +00:00
paul
2103705fc5
Added arpcom counters ipackets, opackets etc.
1993-07-21 04:25:07 +00:00
cgd
8141ce5d83
kill damned RCS Log
1993-07-19 16:58:20 +00:00
mycroft
b9b6bd3397
Add ${DEBUG} to CFLAGS and -f to dbsym.
1993-07-19 16:52:16 +00:00
cgd
886f6afa56
Reading file marks or writing end of tape return 0 bytes, AND THEY
...
DON'T SET THE ERROR BIT ON THE BUFFER UNLESS THE AUTHOR OF PHYSIO
IS STUPID!
1993-07-19 16:44:38 +00:00
cgd
9bd082f70e
replace jolitz's vfs__bio with a better one from CMU via mw.
...
so, replace vfs__bio, and deal with attendant changes.
1993-07-19 16:38:35 +00:00
mycroft
570ad76179
Change open and close routines for swapdev back to enodev. What a kluge.
1993-07-19 10:57:30 +00:00
mycroft
fd13ccf3cc
Fix open and close entries for swap in bdevsw.
1993-07-19 10:35:12 +00:00
cgd
e916333aea
disable all AUTO_EOI's, at bde's suggestion--
...
they don't gain much, and on old chips it doesn't work properly
1993-07-19 08:27:06 +00:00
mycroft
e6c1d2670f
Phooey. Need a better mechanism for dealing with multiple sets of local
...
changes.
1993-07-18 21:26:34 +00:00
cgd
1318be7191
CC should be cc. cc is gcc2...
1993-07-18 16:44:16 +00:00
mycroft
d2e484320a
Add DUMMY_NOPS.
1993-07-18 15:11:31 +00:00
deraadt
a700cbd173
my bucket of mud has changed a bit..
1993-07-18 13:29:27 +00:00
cgd
8fa2ba491b
rework the way effectual NOPs are enabled/disabled to make they delay
...
things in the default case.
1993-07-18 13:08:41 +00:00
mycroft
2565e5e15a
Change to work with new config stuff for specifying load address.
1993-07-18 10:08:22 +00:00
cgd
7b721ac9fa
set mountroot to ufs_mountroot. swapgeneric is currently broken for other
...
reasons (the interface to SCSI disks isn't a clean match, and i'm
not entirely sure what a good way to do it is...)
1993-07-18 09:51:26 +00:00
mycroft
46570ee334
Oops. Back out a change that shouldn't be committed...
1993-07-18 09:48:49 +00:00
mycroft
28df966f59
Use new -T option to dbsym.
1993-07-18 09:47:40 +00:00
mycroft
003ff4e190
Add a `XXX'...
1993-07-18 08:43:19 +00:00
andrew
297f54dd01
* copyin/out(), copyin/outstr(), s/fubyte() et al protection fixes,
...
including COW support, using code based on that from Wolfgang Solfrank and
Christoph Robitschko.
* user segment descriptors fixed to disallow access to user area.
* bde's boot >= 1MB fixes.
1993-07-18 08:22:59 +00:00
mycroft
c558337807
Add some kitchen sinks.
1993-07-17 16:54:16 +00:00
mycroft
f18d296b3c
Stylistic change to attach message to match others.
1993-07-17 16:41:27 +00:00
mycroft
331148c31a
Make these files GCC 2 happy.
1993-07-17 16:20:24 +00:00
mycroft
ad087b06a0
Finish moving struct definitions outside of function declarations.
1993-07-17 15:56:59 +00:00
cgd
3aed8ce5e5
Fixed two occarances of ldos which should have been lods.
...
(From Christoph Robitschko)
1993-07-17 12:28:47 +00:00
cgd
97c38bc76a
gcc-2.4.5's ffs() has been rendered safe for kernel compiling...
1993-07-17 12:22:00 +00:00
deraadt
2ee2073a53
scsi_switch had wrong entries for these controllers...
1993-07-17 11:00:09 +00:00
mycroft
45efbe01cd
#include cpufunc,h so inb() and outb() are inlined.
1993-07-16 15:44:22 +00:00
deraadt
534b762f34
patch from <ache@astral.msk.su> to fix problems:
...
nestart() logic totally rewriten, neput() code moved out of loop.
Fixed error in rxend buffer size: assing 32768 to short.
nerecv() fixed for correct buffer sizes for NE1000.
Detected card type displayed at autoconf time.
1993-07-15 12:57:05 +00:00
mycroft
ba408056a6
Use splnet, not splimp.
1993-07-13 21:53:06 +00:00
mycroft
e086df5a24
Fix addressing bug in bdb junk.
1993-07-13 21:51:36 +00:00
cgd
499f536ddc
up default data size limit to 16M, like on freefall, so everything will
...
compile properly with gcc2.
1993-07-13 10:16:40 +00:00
mycroft
bcfa1d8dd3
Fix handling of bad syscall numbers.
1993-07-12 13:53:36 +00:00
deraadt
6cc173695a
moved bfdttach point to same place as other drivers, from greenman
1993-07-12 13:13:41 +00:00
mycroft
e28cd102b5
Add some more swap.
1993-07-12 12:07:46 +00:00
cgd
395bc5f7a2
physmem is in clusters, not in bytes... that wasn't
...
taken into account in the buffer size calculations
1993-07-12 12:00:45 +00:00
cgd
8401efb773
add -fno-builtin to CFLAGS until gcc bug fixed
1993-07-12 11:58:27 +00:00
mycroft
3be4221095
Change tty code to use clist interface, but with ring buffer implementation.
...
Also, fix a couple of bugs in tty.c and pccons.c, and some gross kluginess
in the hp300 stuff.
1993-07-12 11:36:53 +00:00
mycroft
c3f293f92b
Make splimp = splnet | spltty, and get rid of SLIP kluge for splnet and
...
spltty.
1993-07-11 14:12:40 +00:00
mycroft
0daaa4f16c
Make splimp = splnet | spltty, and get rid of SLIP kluge for splnet and
...
spltty.
1993-07-11 14:03:51 +00:00
paul
14f33d91ea
Made boot up messages cleaner
1993-07-11 12:12:35 +00:00
andrew
84d1e74079
Fixes from bde, including support for loading @ any MB boundary (e.g. a
...
kernel linked for 0xfe100000 will load at the 1MB mark) and read-ahead
buffering to speed booting from floppies. Also works with aha174x
controllers in enhanced mode.
1993-07-11 12:02:17 +00:00
paul
6d1a5a2ad5
New isolan driver. Multiple card and bpf support added.
1993-07-11 11:18:23 +00:00
cgd
4909db9a7e
do quoting right, and give boat-anchor enough symbol space
1993-07-11 10:29:55 +00:00
mycroft
62ddceb6fc
Yah, yah...
1993-07-11 09:53:44 +00:00
mycroft
7d3cf97d73
Oops. Back out clist changes, but leave the bug fix.
1993-07-11 09:45:07 +00:00
cgd
4d187f65ae
DDB makes these kernels too large. damn.
1993-07-11 09:03:13 +00:00
cgd
cc86d5be93
don't ignore errors from dbsym... it might say that, e.g. there's
...
not enough symbol space!
1993-07-11 08:42:22 +00:00
mycroft
dd71ecc3aa
This is so utterly revolting I refuse to describe it, except to say that it
...
fixes the problem of console output hogging the CPU.
1993-07-11 07:54:47 +00:00
cgd
1695b91b15
need more space for symbols than DDB normally gives you...
1993-07-11 07:28:09 +00:00
cgd
3e2b1078a3
kill an extraneous # which was annoying cpp
1993-07-11 06:09:48 +00:00
brezak
083cf2243a
Fix some probs with stack tb's. Deal with syscalls.
1993-07-10 03:26:44 +00:00
brezak
6d65f0bf71
Cleanup warnings and add netbsd kernel name suffix.
1993-07-09 15:24:10 +00:00
cgd
4cbf5e04e2
update for better FP routines, from AT&T & elsewhere
1993-07-09 09:39:13 +00:00
brezak
24ee0231e8
Diskless boot prom code from Jim McKim (mckim@lerc.nasa.gov)
1993-07-08 16:03:44 +00:00
cgd
770db91c65
add "diediedie", a function to make the system panic & dump core
...
in a nice, predictable fashion. useful for DDB, when you want
a core... (i.e. "call diediedie")
1993-07-08 09:55:54 +00:00
deraadt
80dc38edb3
documentation error
1993-07-08 08:22:17 +00:00
mycroft
e4c42383fb
Implement scroll lock using sleep() and wakeup() so we don't get stuck at
...
spltty and freeze everyone.
1993-07-08 07:27:29 +00:00
cgd
f485ebbacc
get rid if wfj's stack limit check-disabling bogosities. (his old
...
exec needed them. stoopid...)
1993-07-08 04:01:13 +00:00
deraadt
1eacd36710
pccons.c now dynamically allocates it's "struct tty"
...
cons.c's "struct tty *cn_tty" wasn't used by any of the kernel, and goes away.
1993-07-07 11:00:23 +00:00
cgd
bab148ba4e
delete inclusion of rlist.h again. grr.
1993-07-07 06:52:39 +00:00
cgd
aa2992a474
make the rlist code all go away. replace it with resource map code,
...
as written by Wolfgang Solfrank.
1993-07-07 06:02:26 +00:00
deraadt
9bff90a5c1
added a timeout debugging mode to wd.c so that people can see how slow
...
their controllers really are. Look for the WDCNDELAY_DEBUG definition.
1993-07-07 05:50:35 +00:00
deraadt
d670635e8b
ok, 5 second command timeouts..
1993-07-07 01:05:42 +00:00
deraadt
ceec40c98f
clean up code for timeout/untimeout/wakeup prototypes.
1993-07-06 06:06:26 +00:00
cgd
21e01d6cd2
change the way dump info is printed back to the original (net/2) way,
...
rather than the jolitz way...
1993-07-06 00:48:06 +00:00
deraadt
86999439b2
number of changes:
...
1. controller reset code moved into one function, called from more places now.
2. more places now do timeouts. TIPCAT code turned on.
3. blew away the unused WDOPENLOCK test code.
4. delay is now done using WDCNDELAY repetitions of DELAY(25). Up to 2.5 second
pause accepted from controller (some controllers have some commands that are
actually this slow)
5. some of the old timeout code was really whacked.
1993-07-06 00:42:43 +00:00
cgd
2d53469109
get rid of extraneous inclusion of rlist.h
1993-07-06 00:31:52 +00:00
deraadt
2cb34d6d65
added a missing {/} pair that barsoom seems to have taken out, but
...
which the standard 386bsd 0.1 driver did have. This is for a piece of
code in the bad block handling. found/fixed by hpeyerl.
1993-07-05 04:44:48 +00:00
deraadt
3322c7b691
all timeout code now calls DELAY() so the timeout delays are the same
...
length on all processors. Where possible, the controller is reset if it
times out.
1993-07-05 03:20:57 +00:00
cgd
b274bb4126
add support for checking entry against max user address
1993-07-05 01:53:56 +00:00
deraadt
748e864b38
No need for the DELAY() macro. in userland. It just polutes the namespace.
1993-07-05 01:12:46 +00:00
deraadt
ed61b76822
increased the timeout inside wdcommand(). Some controllers impliment some
...
commands very slowly.
1993-07-05 00:08:27 +00:00
cgd
c286f8c4fd
move julian's scsi files back into files.i386
1993-07-04 20:08:15 +00:00
cgd
abf0a9b802
do the right thing, so things aren't built in /usr/src/sys
1993-07-04 14:02:53 +00:00
cgd
d6325033cd
make i386 setregs do the "normal thing". should probably do something
...
better with retval... (currenty does nothing)
1993-07-04 10:48:39 +00:00
andrew
12b46ebf29
Got rid of the SHOW_STI I had added to the BPTTRAP() macro - it breaks
...
(in the type 9 trap and into ddb sense) the kernel's breakpoint handling.
1993-07-04 05:49:17 +00:00
cgd
e50f336a76
kernel profiling says that i should make "over_net_stuff_for_spl0" a local
...
label! (i.e. i missed this one before...)
1993-07-03 13:13:34 +00:00
cgd
77219acd07
change interrupt vector names to begin with "X" rather than "V", so we're
...
like every other BSD system on the planet...
1993-07-03 12:32:25 +00:00
cgd
7e940b55e0
add support for David Greenman "ed" driver
1993-07-03 12:21:07 +00:00
cgd
d77e126ab2
add support for David Greenman's "ed" driver.
1993-07-03 12:19:36 +00:00
cgd
b8a46f69af
Unless INTR_DEBUG is set, don't report all of the "random" event types.
...
also, unless INTR_DEBUG is set, make the internal branch labels for
the interrupt code be local labels, so profiling works OK.
1993-07-03 09:43:11 +00:00
cgd
532d59062c
add DDB... why? because we'd like to actually use it to DEBUG things!
1993-07-02 10:09:17 +00:00
andrew
9024d0885a
Fixed a nested comment compiler warning.
1993-07-02 08:15:32 +00:00
mycroft
2eb048f805
Add another tape drive.
1993-07-02 03:23:17 +00:00
andrew
172788b885
Fixed a typo.
1993-07-01 07:22:41 +00:00
mycroft
3c4b913d33
Fix a bunch of things.
1993-07-01 00:24:09 +00:00
mycroft
ec3a442b59
Fix Andrew's real bug, and put back the FAST_VECTOR changes.
1993-07-01 00:20:19 +00:00
andrew
f7dd4be020
Updated comments.
1993-06-30 04:13:34 +00:00
andrew
5138fc637d
Noted that IO_TIMER2 was an EISA-specific feature.
1993-06-30 04:06:41 +00:00
andrew
62442b4e98
Added com_scratch entry.
1993-06-30 04:04:24 +00:00
andrew
8d9d634680
Backed out the changes to the FAST_VECTOR code that were made in the
...
previous revision, as they apparently broke something.
1993-06-30 02:34:57 +00:00
deraadt
9a9273e999
uninitialized variable reported by <jfw@ksr.com>
1993-06-29 19:12:44 +00:00
andrew
bc5f186001
ANSIfications.
1993-06-27 06:42:19 +00:00
andrew
51ac6a0997
ANSIfications.
1993-06-27 06:27:29 +00:00
andrew
0e6cb953ea
ANSIfications - removed all implicit function return types and argument
...
definitions. Ensured that all files include "systm.h" to gain access to
general prototypes. Casts where necessary.
1993-06-27 06:01:27 +00:00
andrew
6273afbfb5
Fixed typo.
1993-06-27 05:54:40 +00:00
andrew
16947975c7
Replace SHOW_A_LOT_NOT with a more meaningful commented-out SHOW_A_LOT.
1993-06-27 05:43:37 +00:00
andrew
f024b50a47
Enable AUTO_EOI_1 by default; leave AUT_EOI_2 alone, even if it does seem
...
to work very well, to avoid any potential troubal.
1993-06-27 05:42:45 +00:00
andrew
0bffd21fdb
Replaced 386BSD conditionals with a NetBSD ones. Fixed a bug in 386BSD
...
support. Cast arguments to tsleep() and wakeup() to avoid compiler
warnings.
1993-06-27 05:39:44 +00:00
andrew
d75ed5fc23
Added bus mice.
1993-06-27 05:33:18 +00:00
andrew
cf73b57b22
Changed the I486_CPU conditionals to be !I386_CPU, to handle the case
...
where both I386_CPU and I486_CPU are configured in the same kernel.
1993-06-27 05:24:24 +00:00
andrew
4b741818d8
Neatened up the AUTO_EOI conditionals. FAST_VECTOR() now saves & restores
...
the ES register, just to be on the safe side (since ES is used in some
locore routines).
1993-06-27 05:15:06 +00:00
andrew
d9022f90d2
Don't try to include "sio.h" just yet.
1993-06-27 04:59:47 +00:00
andrew
a9f16886f9
Re-entrancy protection.
1993-06-27 04:50:12 +00:00
andrew
e495c42118
Added a call to SHOW_STI in BPTTRAP macro. Avoid lots of nops and use
...
bswap if we're a i486.
1993-06-27 04:27:58 +00:00
andrew
13834263a8
Clobbered '/*' within comment, to keep gcc -Wall happy.
1993-06-27 01:24:55 +00:00
mycroft
100f7b0bc5
Oops. Reversed order of args to outb(). Still haven't gotten my 486 booted
...
with a new kernel to actually test this, though.
1993-06-23 05:48:57 +00:00
deraadt
05f50ca11e
I don't know what I did that was so critical, but now the floppy driver
...
works on my machine (it did not before). Big voodoo.
1993-06-21 09:39:52 +00:00
deraadt
80ab28ea30
if the floppy does not exist, say nothing.
1993-06-20 08:42:05 +00:00
deraadt
277c73694e
print "maddr 0xd0000 msize 65536" as "maddr 0xd0000-0xdffff" instead.
1993-06-20 07:24:53 +00:00
cgd
d1ed63195d
fix the divide-by-zero problem w/old disks. this patch is ws's "fault."
1993-06-18 20:45:35 +00:00
cgd
55c2266339
install floppy boot block, too.
1993-06-18 08:03:14 +00:00
cgd
c8bdad0560
convert magic numbers to network byte order, and attendent changes
1993-06-18 06:49:30 +00:00
cgd
9f1a8dc335
new floppy driver, merged from patchkit patch #153
1993-06-18 06:19:16 +00:00
cgd
6046a36e2d
make it *do* something when loading the kernel, a la sun twiddling-thing
1993-06-18 02:28:58 +00:00
brezak
62571113bd
Use NNPX instead of NPX from npx.h for activating npx.
1993-06-18 02:03:34 +00:00
mycroft
420720c2f3
Clean up deleted files.
1993-06-17 04:24:06 +00:00
mycroft
df4fb4cae4
Make ioctl definitions ANSI-compliant.
1993-06-17 04:07:41 +00:00
jtc
2a6a498c49
Move my assembly versions of strlen and ffs into the kernel
1993-06-16 22:22:39 +00:00
mycroft
409bc91101
Move asm.h from /usr/include/sys to /usr/include/machine.
1993-06-16 21:42:43 +00:00
brezak
06dc5c8e13
Use defines in timerreg.h and add spkr_reg.h for specific declarations.
1993-06-16 19:41:54 +00:00
mycroft
8959c6e228
Clean up deleted files.
1993-06-16 18:12:30 +00:00
brezak
c9a48f2b77
Move spkr.h to include/machine so users can use it.
1993-06-16 18:12:23 +00:00
mycroft
5a2b8d1abb
Fix typo.
1993-06-16 02:59:42 +00:00
mycroft
94df11ad63
Make sysbeep() take a frequency, not a timer count, and add constants
...
BEEP_FREQ and BEEP_TIME which can be overridden in the config file.
1993-06-16 02:57:17 +00:00
mycroft
db4a41293e
Nuke MID_I486 case.
1993-06-15 21:56:58 +00:00
mycroft
528edf6037
Move definitions of TIMER_FREQ to timerreg.h, and fix value of CF for DELAY().
1993-06-15 21:37:14 +00:00
mycroft
2a2bde915f
Need to check soft interrupts as well as ICU for overflow.
1993-06-15 20:54:06 +00:00
mycroft
930a773dce
Clean up beep code a miniscule amount, add interrupt protection, and
...
make multiple beeps generate a continuous tone.
1993-06-15 20:34:54 +00:00
mycroft
5592ad3fbb
Ignore interrupts if the device isn't open. This prevents stray interrupts
...
from hosing the works. What a stupid architecture.
1993-06-15 01:50:32 +00:00
cgd
fae2a0b6f8
the previous change (to make NOPs do idle stuff) was irrelevant,
...
apparently; lamp is now stable with NOPs that do nothing.
1993-06-15 01:27:14 +00:00
mycroft
938b01e0ae
Sigh. Save a few cycles occasionally.
1993-06-14 19:44:37 +00:00
mycroft
cf1dbb9fb8
Oops. Wrong name for ISO interrupt routine.
1993-06-14 19:35:59 +00:00
mycroft
e534ec58ec
Add support for other networks than INET.
1993-06-14 19:29:30 +00:00
mycroft
42fb89da69
Explicitly disable mouse during attach.
1993-06-14 17:33:18 +00:00
mycroft
6bca967a4e
These mice use 4 ports.
1993-06-14 17:04:22 +00:00
mycroft
08f233618d
Rework neread(), and add BPF hooks for receiving. (Still need BPF hook
...
for transmitting.)
1993-06-14 16:49:09 +00:00
mycroft
625cd25efd
8390-based boards use 16 ports, not 8.
1993-06-14 16:45:25 +00:00
mycroft
fa1551c8a6
Work around a bug in XFree86.
1993-06-14 16:38:25 +00:00
mycroft
ddf64edfe6
Somebody didn't ftruncate()...
1993-06-14 15:57:07 +00:00
mycroft
60dfc2196f
Fix egregious stupidity.
1993-06-14 15:35:14 +00:00
mycroft
6d58d97764
Update my config files.
1993-06-14 15:29:55 +00:00
mycroft
25b19a1b61
Add entry for pms.
1993-06-14 15:16:23 +00:00
mycroft
87bcb8ca95
Yeah, I'm awake.
1993-06-14 15:13:14 +00:00
mycroft
06f36e1045
Add preliminary (read: untested) PS/2 mouse driver.
1993-06-14 15:05:50 +00:00
mycroft
ba09c15c63
Return EBUSY if device already open.
1993-06-14 12:46:56 +00:00
cgd
330f5907f2
say "using exception 16" rather than "exception 16"; the latter
...
lookes like it could be an error message...
1993-06-14 07:06:49 +00:00
andrew
925a429d35
Reduced bus-on time from the default of 11ms -> 9ms, to prevent floppy from
...
becoming data-starved during simultaneous fd & scsi activity.
1993-06-14 04:16:03 +00:00
andrew
fe853a780c
Changed the name of bms -> mms.
1993-06-14 02:28:34 +00:00
andrew
f9ce81fc82
Name change from bms -> mms.
1993-06-14 02:26:17 +00:00
andrew
07ec5d2fc6
Renamed Microsoft busmouse driver from bms -> mms
1993-06-14 02:12:15 +00:00
deraadt
e242190751
*whoops*. The previous commit killed a few important characters of code.
1993-06-14 00:47:08 +00:00
deraadt
64f27b118b
incorrect previous change, the LKM_CDEV/LKM_BDEV macros generate the
...
correct cdevs[]/bdevs[] structures for insertion.
1993-06-13 18:32:48 +00:00
andrew
566c83b7c1
Added microsoft and logitech busmice entries.
...
Filled in reserved "lkm" entries with enxio()s.
1993-06-13 14:10:44 +00:00
andrew
e1e618d7ca
Added microsoft and logitech isa busmice.
1993-06-13 14:03:50 +00:00
andrew
fc37a8acde
Microsoft/Logitech busmouse ioctls.
1993-06-13 14:01:06 +00:00
andrew
bd8e20a9b4
Logitech busmouse driver.
1993-06-13 13:59:52 +00:00
andrew
160d6e8b5c
Microsoft & Logitech busmouse drivers.
1993-06-13 13:55:03 +00:00
andrew
86c3eb7c8b
Added IO_BMS1, IO_BMS2 bus mouse entries.
1993-06-13 12:55:47 +00:00
cgd
3fcc79608f
make no-ops actually take time; seems to make bde's interrupt code more
...
stable...
1993-06-13 05:57:34 +00:00
cgd
c5d0eb5199
note gprof.ex is in csu/i386 not csu.i386 like it used to be...
1993-06-11 02:59:54 +00:00
deraadt
f37ee25bb2
sigh. one day i'll finish this driver, meanwhile, one more fix..
1993-06-10 04:50:42 +00:00
deraadt
f6779cbdce
minor silliness related to two or more controllers
1993-06-09 22:36:40 +00:00
mycroft
c425e255c1
Update my config files.
1993-06-09 00:11:46 +00:00
deraadt
e3295c1d74
makes more sense if src is mounted readonly
1993-06-08 03:36:39 +00:00
cgd
57d3a6d525
add support for terry lambert's loadable kernel modules.
...
needs a bit of cleanup, but overall: SLICK!
1993-06-07 19:51:59 +00:00
mycroft
f73effe636
Clean up deleted files.
1993-06-07 00:20:39 +00:00
cgd
0d126d8b38
make conf.o actually depend on conf.c...
1993-06-06 23:29:03 +00:00
cgd
f1b8c74730
make getc() and ungetc() be rb{un,}getc(), so getc() and ungetc()
...
don't conflict w/ansi prototypes...
1993-06-06 23:04:42 +00:00
mycroft
433d3ac089
Clean up deleted files.
1993-06-06 22:20:23 +00:00
cgd
450bfb0c82
cleanup, add DDB to dist. floppy kernels, and get rid of f*@#ing "as"
1993-06-06 22:20:03 +00:00
cgd
276a05a454
apply patch 167, to fix some interrupt system bogosities
1993-06-06 05:06:50 +00:00
mycroft
c6ab6df500
Clean up deleted files.
1993-06-06 04:18:56 +00:00
cgd
515bda903f
add DDB to "SUN_LAMP", and get rid of "SUN_LAMP_DDB" because they
...
were confusing me, and it's my machine...
1993-06-06 04:18:54 +00:00
cgd
8a05b36058
incorporate Bruce Evans' interrupt changes, as hacked by Rod grimes,
...
for patchkit patch 158. it appears to work well.
1993-06-06 04:14:01 +00:00
cgd
e52125aa5d
change MCLSHIFT to 11, so mbuf cluster size is bigger than MTU
...
of network interfaces, for performance. to use old size,
use "options MCLSHIFT=10" in your kernel config.
1993-06-05 23:11:10 +00:00
cgd
9d6a908bb7
patch from rgrimes to add delay to let data port stabilize, also
...
make "lpflag" unique to each driver
1993-06-05 22:58:29 +00:00
cgd
e13c2fa2e7
make sure kernel is small enough; this is a really weird fix from
...
rod, pk patch #159 . the comment is:
The +28672 is for memory allocated by locore.s that must fit in the bss!
this seems way wrong to me, but i'm not going to fix it in locore right
now...
1993-06-05 22:52:11 +00:00
cgd
948e273f20
oops, forgot to delete one variable reference
1993-06-03 18:06:43 +00:00
cgd
061ba43003
print out old-style disk-syncing info, complete with "meaningless" numbers
1993-06-03 18:01:08 +00:00
cgd
f813a8b341
add prototype for a function to be called from execve to check a_mid type
1993-06-03 01:31:15 +00:00
cgd
94f52462a4
add support for a function to be called from execve to check a_mid type
1993-06-03 01:31:05 +00:00
cgd
9c46a9333d
add 'options "COMPAT_NOMID"' for compatibility w/i386 binaries w/no
...
a_mid in their exec structure (and therefore, in the NWO, having
an a_mid of MID_ZERO)
1993-06-03 01:30:19 +00:00
cgd
ae97de78bc
get rid of unnecessary PCB_SIGC definition
1993-06-02 19:25:00 +00:00
cgd
f9518c61da
get rid of last bit of signal-trampoline-in-pcb hackery
1993-06-02 04:28:37 +00:00
cgd
3e25387fbb
final cleanups for putting signal trampoline on stack
1993-06-02 04:28:07 +00:00
cgd
6738d12182
set things up so that the signal trampoline code is on the stack,
...
like it normally is in BSD systems. still has a bit of hair...
1993-06-02 04:11:48 +00:00
cgd
eff5542792
machine-dependent exec stuff
1993-06-02 02:46:58 +00:00
cgd
e9009189f5
fix bogus initializer
1993-05-31 00:54:40 +00:00
cgd
2b422f4029
have setregs copy the stack pointer, too
1993-05-30 18:52:39 +00:00
deraadt
2adecf84f6
1. It is now possible to build a kernel that does not have a pc0 device driver.
...
2. "press any key to reboot" reads the key from the console.
3. wddump() still needs a non-blocking getc() routine (or flush)
1993-05-28 09:10:52 +00:00
deraadt
0b12df586d
1. It is now possible to build a kernel that does not have a pc0 device driver.
...
2. "press any key to reboot" reads the key from the console.
3. wddump() still needs a non-blocking getc() routine (or flush)
1993-05-28 09:10:29 +00:00
cgd
99c3a88ce4
kill the last copy{in,out} (and related functions) changes, because they
...
were broken...
1993-05-27 16:44:13 +00:00
proven
02dc05dd99
Cleaned up a little.
1993-05-27 02:12:28 +00:00
proven
8d60a2631f
Compiles with gcc-2.3.3 now.
1993-05-26 18:58:11 +00:00
proven
99519099bf
Compiles with gcc-2.3.3 now.
1993-05-26 18:43:33 +00:00
cgd
60fe9c133d
add "options FIFO"
1993-05-26 12:48:35 +00:00
cgd
9c27493b37
kernel for sun-lamp, with debugging included. possible now, due
...
to the new tty allocation setup.
1993-05-26 11:22:45 +00:00
deraadt
806b927d8b
more ptys guys! now they are cheap as borst
1993-05-26 10:15:05 +00:00
deraadt
2f0c0eb674
tty dynamic allocation
1993-05-26 10:06:41 +00:00
cgd
44dcf397e8
move sipcreg into i386/include/reg.h where it belongs, right next to ipcreg.
1993-05-24 11:37:12 +00:00
cgd
864a094e19
do the right thing for vers.o. i.e. don't make newvers if nothing
...
has changed.
1993-05-24 11:04:45 +00:00
cgd
fe1802950b
add include of select.h if necessary for protos, or delete if extraneous
1993-05-22 11:40:42 +00:00
deraadt
ccbce9314e
my config file
1993-05-22 11:29:08 +00:00
cgd
30177b538f
add rcsids to everything and clean up headers
1993-05-22 07:56:12 +00:00
deraadt
dde4fa6fe1
fixed typo
1993-05-22 07:40:46 +00:00
cgd
529ff2d4b7
Add reception of multicasts for if_we when using ISO, and add soft
...
interrupt handler for ISO.
(from Havard Eidnes <Havard.Eidnes@runit.sintef.no>)
1993-05-21 12:49:58 +00:00
cgd
253169d468
add "cpu classes" in addition to cpu names, put cpu names in table, along
...
with mapping to classes. this is for upgraded cpu-id code coming "soon"
1993-05-21 12:23:31 +00:00
davidb
0af6cb5bab
Cleaned up some #defines and my earlier mods.
...
Fixed incoming packet counter, as noted by mike@sarah.lerc.nasa.gov
1993-05-21 12:18:10 +00:00
cgd
2c553d7f06
make tabbing sane
1993-05-21 12:03:00 +00:00
cgd
5c9b7462d0
change theo's config to support i486, too
1993-05-21 11:39:18 +00:00
cgd
12fb16dc4b
move cpu types out of assym.s and into cputypes.h
...
and have that file included by cpu.h and by locore.s
1993-05-21 11:06:07 +00:00
deraadt
e34f239662
First cut at cpu independent disklabels.
...
There will be niggly little details no doubt..
1993-05-20 22:48:23 +00:00
cgd
cdcb81b16e
hack on the uname "machine name" stuff for hopefully the last time.
...
now it uses MACHINE, as defined in param.h
1993-05-20 15:36:20 +00:00
cgd
bcbeb2f225
require MATH_EMUALATE to be defined if you want to use the emulator
1993-05-20 14:35:11 +00:00
cgd
62b2b3e2f9
clean up for new cpu stuff
1993-05-20 14:34:43 +00:00
cgd
42ff6b7e23
do the correct thing for the "cpu" config definition, and require
...
options "MATH_EMULATE" for math emulation
1993-05-20 14:33:41 +00:00
mycroft
c13e0190b7
Clean up deleted files.
1993-05-20 14:32:45 +00:00
cgd
95895b842e
update config files for correct "cpu" usage
1993-05-20 14:32:17 +00:00
deraadt
cda0b34784
we driver prints same ethernet address message as other drivers
1993-05-20 10:40:47 +00:00