5f53a93d2f
Use the new BRDGGIFS and BRDGRTS cmds which just use ifdrv directly.
2015-06-01 06:15:18 +00:00
c063d4ccd5
Use VFS_PROTOS() for lfs.
...
Rename conflicting struct lfs field "lfs_start" to "lfs_s0addr".
No functional change.
2015-05-31 15:44:30 +00:00
e85ef03b1e
Remove ISCSI_DEBUG branches.
2015-05-30 16:00:51 +00:00
44f0e14601
Remove userland side of ISCSI_DEBUG and ISCSI_TEST_MODE.
2015-05-30 15:57:32 +00:00
d8413b896e
constness doesn't increase by applying more const.
2015-05-28 20:14:00 +00:00
c142b6df31
Constify an array of strings.
2015-05-28 01:35:31 +00:00
e304a25c5b
use strtou
2015-05-27 17:55:23 +00:00
05c0668e69
Better sanity check numbers given to raidctl(8)
...
Replace atoi(3) by strtol(3), and check that numbers are valid,
positive, and in int32_t range. The previous lack of check could
silently lead to the same serial being set to all RAID volumes
for instance because given numbers were bigger than INT_MAX. The
consequence is in an awful mess when RAIDframe would mix volumes...
2015-05-27 15:31:15 +00:00
44b264d7a7
Fix rump.ifconfig shows host's interface names in link local addresses
2015-05-19 08:14:38 +00:00
0c4c07ab30
Add options -X for deadline and -x for reply maxwait (flag names matching
...
FreeBSD). Unline FreeBSD, currently -x doesn't count late packets to statistics.
After discussion with, and help from ozaki-r@
Should fix PR/49896
2015-05-15 08:02:39 +00:00
6011d36bd6
Fix rump.{netstat,route} shows host's interface names in link local addresses
...
Interface names of IPv6 link local addresses are resolved
by getnameinfo(3). So we need to rump-ify it as well as
if_indextoname and getifaddrs.
2015-05-15 06:58:59 +00:00
1490a7ba80
Add documentation for the drvctl driver and add reference.
...
Fixes PR 49895.
2015-05-13 07:28:49 +00:00
e0cc834e99
ioctl -> prog_ioctl as pointed out by pooka@
2015-05-12 14:05:29 +00:00
77cc846abe
Use _PATH_WATCHDOG from <paths.h> instead of locally-defined value.
2015-05-06 23:08:30 +00:00
dbb6db0ed0
Report IN_IFF_TENTATIVE and friends.
...
Wait for IN_IFF_TENTATIVE to be removed with the -w flag.
2015-05-02 14:43:51 +00:00
874b0026ee
Add missing doc flags (B,M,m)
2015-04-29 17:07:11 +00:00
c4603cb30b
- use calloc to zero memory
...
- pass the proper buffer to mkdir
- fix for apple ufs
2015-04-29 01:49:25 +00:00
4f6ce6a7d2
reduce bss usage
2015-04-28 15:15:53 +00:00
d5a931670f
remove 80211 stats if small.
2015-04-28 15:14:57 +00:00
9521ae7bfd
Fix typos
2015-04-28 09:48:30 +00:00
c902c296d4
fix mistake in previous
2015-04-27 17:05:58 +00:00
3220cb2ac6
Be a bit more verbose if the kernel rejects a file
2015-04-26 09:20:09 +00:00
74c7e628de
make table smaller in size.
2015-04-25 21:43:53 +00:00
8e83ba138f
Add the once -o option like ping
2015-04-24 00:42:56 +00:00
b46e0d1534
newfs_msdos allowed suffixes such as 'k', 'm' for some parameters,
...
but amusingly this did not include Block size, or Sectors per cluster.
Allow for all numeric parameters (If I want to specify the number
of drive heads as '1K', then why not?)
2015-04-23 13:27:14 +00:00
a7a37fb042
Move the INET6 specific code for wait_dad_exec() into af_inet6
...
by using a new afswtch hook af_addr_tentative.
2015-04-22 17:42:22 +00:00
df66dd74ee
Fix rump.route shows host's interface names
...
Let it use rump-ified if_indextoname and getifaddrs
to get rump kernel's interfaces, which is the same way
as ifconfig.
2015-04-22 03:07:55 +00:00
2603e0673f
remove various HAVE_GCC=45 fragments.
2015-04-15 19:13:46 +00:00
db8ca554ec
Use <sys/rndio.h> instead of <sys/rnd.h>.
2015-04-13 22:18:50 +00:00
d0b93bc844
if the -p flag is specified, display a progress bar while growing the file-system
2015-04-06 22:44:04 +00:00
f3a445024e
factor out geometry calculation and use this also in CheckOnly mode.
...
be a bit more verbose in Verbose mode.
2015-04-06 13:33:42 +00:00
4962b364b8
Handle case in grow() where last cylinder group is too small for ufs2.
...
Align with code in shrink().
2015-04-06 12:38:21 +00:00
5a1645e4da
New sentence, new line. Sort option descriptions.
2015-03-29 19:42:15 +00:00
f89312b935
- Fix fallout for recent bread() change (removing cred arg).
2015-03-29 19:35:58 +00:00
ae3fcf098a
- Add -c to check to see if grow/shrink is required
...
- Divide by DEV_BSIZE when returning size of file.
- Update manpage
2015-03-29 19:33:55 +00:00
9ea98f4524
Use `!= -1' instead of `== 0' out of paranoia.
2015-03-28 17:25:33 +00:00
bb5cf371be
Make get_dev_size work on regular files too.
2015-03-28 17:22:46 +00:00
a37502b2b6
Add RTF_BROADCAST to mark routes used for the broadcast address when
...
they are created on the fly. This makes it clear what the route is for
and allows an optimisation in ip_output() by avoiding a call to
in_broadcast() because most of the time we do talk to a host.
It also avoids a needless allocation for the storage of llinfo_arp and
thus vanishes from arp(8) - it showed as incomplete anyway so this
is a nice side effect.
Guard against this and routes marked with RTF_BLACKHOLE in
ip_fastforward().
While here, guard against routes marked with RTF_BLACKHOLE in
ip6_fastforward().
RTF_BROADCAST is IPv4 only, so don't bother checking that here.
2015-03-23 18:33:17 +00:00
c1e351a1b2
Don't truncate at microseconds while preserving timestamps.
...
One of motivation of this change is to make the behavior of test(1)
-nt/ot with preserved copy (like cp -p) closer to the NetBSD 6.
Of course whether full timestamps are kept or not depends also on
underlying file system.
The ifdef added in mv(1) since existing ifdefs was our local change
to compile it on solaris (though I couldn't test it):
http://mail-index.netbsd.org/tech-userlevel/2014/11/28/msg008831.html
2015-03-02 03:17:24 +00:00
4b8999e0dd
safely update existing wedge links
2015-03-01 14:21:17 +00:00
43800a7e73
Teach route(8) about RTF_LOCAL.
2015-02-26 09:56:11 +00:00
2122be46d6
Bump date for previous.
...
New sentence, new line.
2015-02-25 09:01:08 +00:00
0a7f816b6d
Let drvctl -p select elements from an array property by numeric index.
2015-02-24 18:15:29 +00:00
a39ebfb79e
Move communication socket to /var/run, especially when starting iscsid
...
during boot, it might disappear otherwise.
2015-02-21 20:33:44 +00:00
3d6eb1fc0f
let's make this compile again.
2015-02-15 21:46:49 +00:00
481b9e731c
At startup, instead of doing run-hooks for each device, call run-hooks
...
once with a list of all found devices. This lets us batch calls to MAKEDEV
which results in a noticeable improvement in Raspberry Pi boot time.
Run the initial device enumeration hooks before detaching from the foreground,
ensuring that any required devices have been created before the rc.d script
exits.
2015-02-15 15:56:30 +00:00
9fbc750691
Display the IPv6 address flags autoconf and temporary
2015-01-20 22:13:19 +00:00
a451832ee3
kill 1 copy of strtonum.
2015-01-16 20:12:28 +00:00
20d9dd5566
make netname4 match the netname6 signature avoiding a NULL pointer.
2015-01-07 22:38:32 +00:00
27d20d98fc
Add missing "addr" and "static" commands.
2015-01-05 00:36:23 +00:00
15c9a10afd
gcc 4.9 produces vfork clobberation warnings for "name" and "buflen".
...
Since there's no performance reason to use vfork here, just replace it
with fork and be done with warnings once and for all.
2015-01-04 22:05:37 +00:00
4897154dae
Fix volumesetname to comply to UDF 2.01 [2.2.2.5]
2015-01-02 21:01:12 +00:00
52e8eb1316
Fix the 3 programs that use DTYPE_ (disklabel disk types) constants from the
...
kernel. Two of them are inside ifdefs.
2015-01-02 19:46:02 +00:00
d15e4a5d5d
Avoid mixing cluster numbers and sector numbers. Makes code more readable.
2015-01-02 06:21:28 +00:00
15f5b75638
abort earlier.
2014-12-29 16:35:38 +00:00
59069b7aab
Provide a simple getdisksize() api for gpt(8).
2014-12-29 16:27:43 +00:00
ccbdb0d177
Factor out the getdisksize() drvctl method, and provide an alternative that
...
directly uses the disk ioctl's instead of relying on the drvctl device driver
which is currently not mandatory.
2014-12-29 16:27:06 +00:00
f44489f8dc
MKINET6=no build fixes
...
http://mail-index.netbsd.org/tech-net/2014/12/13/msg004898.html
2014-12-20 13:15:48 +00:00
62cbe5902e
Note that RTM_CHANGE can also change the gateway
2014-12-17 10:56:09 +00:00
d980f336d5
fix possibly uninitialized variable.
2014-12-14 23:27:14 +00:00
d4b702a5f2
avoid local variable shadowing devname.
2014-12-14 23:25:07 +00:00
b1ec4779e4
Bump date for previous. Fix typo.
2014-12-14 17:15:14 +00:00
a0b59f5f8a
Add validation methods "mbr" and "gpt" for disks without a valid disklabel.
2014-12-14 12:31:39 +00:00
f902d9ca42
support wedge names.
...
The default param file for a wedge is still named after the device (dkN)
which might be unpredictable. Use an explicit param file instead.
2014-12-14 11:31:39 +00:00
490457d5da
Make ccdconfig resolve wedge names.
2014-12-07 10:44:34 +00:00
9171ddc6ae
Fix handling of -t option for the type command.
...
Match any type, when no option is given, just like for the label command.
2014-12-07 09:51:42 +00:00
d12dcb884c
Bump date for previous.
2014-12-06 21:53:55 +00:00
c3505b64dc
Add some more common partition types.
2014-12-06 12:24:22 +00:00
89b27dd856
Add reference to mount_chfs, bump date.
2014-12-06 12:12:17 +00:00
3747949d9f
Instead of zerodivide, give a useful error message.
2014-12-04 01:41:37 +00:00
27fad02cd4
Complete the routing argument table by including the ID's used in the routing
...
display.
2014-12-01 20:30:27 +00:00
b5ac626c87
Adjust default packet size to 56 data bytes (64 total).
...
Make error messages consistent.
2014-11-29 14:48:42 +00:00
0c4052c0de
PR/49423: Martin Husemann: ping for small packets does not work in -7 or
...
-current
XXX: pullup 7?
2014-11-27 19:43:58 +00:00
aeb66be189
- pass the proper argument vector so that subcommands can use getopt.
...
- add -q and -e for listwedges.
2014-11-23 15:43:49 +00:00
96f40a63cc
handle constness better
2014-11-17 07:15:28 +00:00
477be5f2de
handle constness
2014-11-17 07:13:42 +00:00
8e3b364b00
Report the argument instead of (null) when opendisk fails.
2014-11-17 07:11:18 +00:00
c87c6690c0
Skip vendor if the string is empty.
2014-11-15 01:52:01 +00:00
2bd97efc9a
PR/47704: Takahiro HAYASHI: Add -L flag
2014-11-12 03:34:08 +00:00
802a4e04fc
remove debugging
2014-11-09 22:50:38 +00:00
66d4eaa769
add handler for /kern/evcnt and print the actual error when failing.
2014-11-09 18:36:02 +00:00
521e0d5bd2
give a little more space
2014-11-08 00:47:32 +00:00
74d147444a
Now that the code can support tags and verbose route printing, enable them.
...
Also document previously undocumented flags.
2014-11-07 14:57:08 +00:00
30f4c8e6f6
Factor out the netstat route printing code and use it here. There is no
...
point in having 2 different copies; fixes PR/49371
2014-11-06 21:29:32 +00:00
88a571cbd8
New sentence, new line. Bump date for previous.
2014-11-05 09:26:26 +00:00
cfe8bb2a9d
Add 'makewedges' option to autodiscover wedges from a changed label.
2014-11-04 08:00:44 +00:00
48b712a059
Add #include <inttypes.h> for intmax_t to fix compile error.
2014-11-04 03:05:43 +00:00
d8015429ba
ClusterOffset actually needs to be able to be negative.
2014-11-03 18:55:04 +00:00
a62f667a0a
fix logic that handles command line arguments. Now you can:
...
fsck /mnt/point
fsck dkX
fsck rdkX
fsck /dev/dkX
fsck /dev/rdkX
fsck NAME=wedge
2014-10-25 22:00:19 +00:00
ab9ddb6964
Support wedge names.
...
before:
newfs dk1 - formats /dev/rdk1
newfs rdk1 - cannot open /dev/rrdk1
newfs /dev/dk1 - /dev/dk1 is a block-device, use raw device
newfs /dev/rdk1 - formats /dev/rdk1
now:
newfs dk1 - formats /dev/rdk1
newfs rdk1 - cannot open /dev/rrdk1
newfs /dev/dk1 - formats /dev/rdk1 (*)
newfs /dev/rdk1 - formats /dev/rdk1
newfs NAME=wedge - formats /dev/rdk1
(*) getfsspecname() returns the block device which must be translated.
Passing a block device manually cannot be distinguished from this case.
2014-10-25 16:47:23 +00:00
38d2e3f021
Remove the ability for userland to toggle IN6_IFF_TENTATIVE.
...
Preserve IN6_IFF_TENTATIVE when updating address flags.
2014-10-20 14:50:09 +00:00
f0a7346d21
src is too big these days to tolerate superfluous apostrophes. It's
...
"its", people!
2014-10-18 08:33:23 +00:00
d6a1b6b395
add a whole bunch of S.M.A.R.T. status i found around various sources.
...
now nothing on my new SSD is unknown, except #249 .
2014-10-15 06:54:04 +00:00
c4ba54210e
Paranoia: choke noisily on EOF from /dev/urandom.
2014-10-04 11:23:35 +00:00
ba983c7779
Make gpt(8) generate v4 (random) uuids.
...
Don't needlessly leak your date/time and MAC address when you edit
the disk.
Read from /dev/urandom rather than calling arc4random or anything,
since this is a tool. (Cygwin seems to have /dev/urandom, but yell
if this breaks the build on your exotic platform because it lacks
/dev/urandom.)
ok apb
2014-10-04 10:30:13 +00:00
ec23d78824
Remove trailing whitespace.
2014-10-04 07:15:54 +00:00
279da39389
Allow specifying sector and media size on the command line.
2014-10-04 01:00:42 +00:00
194a5fe433
provide a copy of the kernel uuid generator (with portable API calls) for
...
tools.
2014-10-03 20:30:06 +00:00
00433a3409
"0" is not guaranteed to be unique
2014-10-03 00:51:31 +00:00
1029f7d668
include <sys/endian.h> for both the non-tools build,
...
and the tools build on a host where the file exists.
Fixes a build problem on FreeBSD, reported by Herbert J. Skuhra, where
tools/compat's configure detected that be32dec() and friends were
available in the host's <sys/endian.h>, so tools/compat did not provide
its own versions.
2014-10-02 21:27:41 +00:00
1a21d263f9
Fix tools build on !NetBSD.
2014-10-02 19:15:21 +00:00
f685c2f61e
It's HAVE_NBTOOL_CONFIG_H, not HAVE_NBTOOLS_CONFIG_H
2014-10-01 12:55:39 +00:00
870b6dcbee
oops, forgot to update end of data area
2014-10-01 03:52:42 +00:00
c4b5bb5337
using random values for hdr->hdr_guid does not work very well
2014-10-01 01:08:25 +00:00
0d4fdcc249
actually return the uuid when parsing one that is in numeric format
2014-10-01 01:07:24 +00:00
20f10808c3
correctly show partition type in the new world order
2014-09-30 22:56:36 +00:00
0e826d2ca3
Check size of correct buffer. Note, just being pedantic as the buffer
...
being checked is the same size as the one that should have been checked.
2014-09-30 20:23:23 +00:00
21c34dbb1d
Add internal uuid support, since the linux+macos versions of the library
...
are different than than *bsd ones, and others might not have it at all.
2014-09-30 17:59:59 +00:00
c145521aad
Add comma in enumeration.
2014-09-30 08:20:29 +00:00
d9141272a7
Add mpt reference, as support for this device was added recently
2014-09-30 08:14:48 +00:00
c917041fda
remove compat defines.
2014-09-30 02:12:55 +00:00
4da1cfa89d
more toolification changes
2014-09-29 22:22:03 +00:00
866082940a
more toolification
2014-09-29 21:04:34 +00:00
a50708a134
minor toolification: need libprop...
2014-09-29 20:28:57 +00:00
ac204e48a2
PR/47990 - Dr. Wolfgang Stukenbrock -- add "-L <label>" as selector option
2014-09-29 05:56:43 +00:00
88085c2f28
PR/44218 - David Young -- add "type" subcommand to change a partition type
2014-09-28 08:14:51 +00:00
e4be9d18c3
- handle a GPT that isn't an exact multiple of a sector
...
- adjust PMBR size, in case new disk is a different size
- don't leak as much memory
- clean up error handling somewhat
2014-09-26 08:56:34 +00:00
ede6a6c556
no C99isms in tool code
2014-09-26 05:34:15 +00:00
3821b76445
Fix compile error observed on i386. Use PRIu64.
2014-09-23 13:48:04 +00:00
2ed5cc2617
- make gpt_gpt() available for use directly by subcommands
...
- create new resizedisk disk subcommand for relocating backup GPT
2014-09-23 07:47:54 +00:00
4013e132a3
document the new restore subcommand
2014-09-20 22:36:09 +00:00
06190c9314
Initial cut of gpt restore. This functions correctly in testing,
...
but isn't all that pretty. It has minimal error testing and may
leak memory. It also only works with empty disks. If passed "-F"
flag, it will blank the disk for you.
2014-09-20 22:11:27 +00:00
3bbdf28d09
Add OpenRISC 1000 & UCB RISC-V platform support.
2014-09-19 17:45:03 +00:00
ba4f0be24c
Remove out-of-date comments
2014-09-17 01:00:41 +00:00
6b3fd816dd
PR/49206: ping6 dies with SIGINT even when it just fails to ping
...
When reusing the same handler for SIGALRM, make don't pretend you
got SIGINT.
2014-09-16 21:29:12 +00:00
75f57c494b
Write about -vlanif in ifconfig.8
...
PR 49114
2014-09-15 06:48:05 +00:00
adf2c730e5
Add -vlanif to the help message of ifconfig
...
PR 49114
2014-09-15 06:46:04 +00:00
58001a8b3d
Initialize timespec "end" for the benefit of some gcc versions getting
...
"may be used uninitialized" warnings wrong.
2014-09-12 08:54:26 +00:00
c6314d6139
Remove rtsol(8) and rtsold(8) as their functionality is in dhcpcd(8).
...
Remove rtsol(8) from rc.d/network.
Add -w seconds command to ifconfig to wait for N seconds for until DAD
has finished on all addresses.
Use ifconfig -w in rc.d/network instead of a forced sleep.
As discussed on tech-net@
2014-09-11 13:10:03 +00:00
e3f4016378
- dump all partitions, not just ones that are in use
...
- while here, squash a memory leak
It shouldn't be necessary to backup unused partitions, however
the partition GUID is created at the time the GPT is created and
is never changed. It shouldn't matter if the GUID of an unused
partition changes, but there may be some special case where it
does. Since it isn't a big deal to record the unused partitions,
might as well do it.
2014-09-10 10:49:44 +00:00
ef9cc4e43f
- record the sector size of the disk
...
- correct confusion with end_cylinder and end_sector in MBRs
2014-09-09 06:30:09 +00:00
76c8639541
Accept driver names only in the two args form together with a minor number.
...
That's what the documentation says and also avoids the case where the driver
name converted to a major number is interpreted as a packed dev_t number.
2014-08-22 22:28:50 +00:00
4e8f1b53e9
Rework to be avoid a conditional assignment which results in:
...
sbin/ping6/ping6.c:1879:8: error: 'cbit.skip' may be used uninitialized in this function [-Werror=maybe-uninitialized]
cur += ntohs(cbit.skip) * 32;
2014-08-22 20:54:29 +00:00
b41d70db45
Don't print ccd_size with %zu; it no longer has type size_t.
...
Instead, cast to uintmax_t and print with %ju.
2014-08-17 07:05:44 +00:00
7d706cf73d
Switch size_t to uint64_t in appropriate places to ensure that ccd(4) works
...
with component and total sizes of > 2TB.
Add COMPAT_60 code for platforms where this alters userland-accessible
structures.
Make kernel print device information when a ccd configured.
Fix some typos in comments.
2014-08-16 19:27:27 +00:00
dd877031a4
Adapt to reality -- already open BSD style nodes do not appear on
...
ptyfs mounts (this changed some months ago).
2014-08-13 15:48:38 +00:00
3c11b029a5
Interleave 0 means concatenate serially, do not interleave.
...
This information was in the ccd(4) man page, but not
in ccdconfig(8) or ccd.conf(5).
2014-08-13 14:13:04 +00:00
31ea3cc275
Interleave 0 means concatenate serially, do not interleave.
...
This information was in the ccd(4) man page, but not
in ccdconfig(8) or ccd.conf(5).
2014-08-13 13:14:35 +00:00
3170c9b01c
Add restore subcommand.
...
XXX It does not actually work yet. It is being committed now to make
later pullups easier.
2014-08-10 18:27:15 +00:00
d3df20dd66
Sync usage with manpage a bit more.
2014-08-10 17:13:14 +00:00
233b62b2e9
Sort options and mark them as optional.
...
Bump date for previous.
2014-08-10 17:13:02 +00:00
ea6af427bd
Merge tls-earlyentropy branch into HEAD.
2014-08-10 16:44:32 +00:00
fa05229ce5
Fix typo in "dreamcast" port name.
2014-08-10 06:48:51 +00:00
547b3a3b01
Changes to existing files to enable building AARCH64 userland.
...
evbarm64-el
This is clang only. While gcc4.8 supports aarch64, no netbsd support has
been written for aarch64 with gcc4.8.
2014-08-10 05:56:36 +00:00
3975de5b9d
Bump date for previous. New sentence, new line. Use more markup.
...
Remove superfluous Pp in list.
2014-08-09 10:41:05 +00:00
2d1e5095e8
add -S option to adjust the superblock for different sector sizes. While
...
the kernel ignores this information, userland tools rely on it.
This is needed when moving images between devices of different sector size.
2014-08-09 10:33:46 +00:00
810ebb8769
Fix snprintf usage and, while here, don't trundle off the end of an
...
array. Part of PR 47976 from Henning Petersen.
2014-07-27 04:23:44 +00:00
63b30d82c2
Print uint32_t field as such.
2014-07-15 20:18:30 +00:00
b7f1700a57
Revert previous; it doesn't work because all the lfs tools
...
promiscuously .PATH in each other's source files, and I haven't the
time or patience to deal with it tonight.
2014-07-13 02:44:21 +00:00
ca11835cd5
G/C my_vpanic().
2014-07-12 19:48:24 +00:00
6df0042d98
Remove pointless function indirection through panic_func(). It was
...
initialized to one thing, and then set to another right at the top of
main and never changed again.
2014-07-12 19:44:00 +00:00
0736ba101a
Revert version 1.111 of sysinst/disks.c, which caused sysinst to
...
create lfs fstab entries with fsck disabled, and instead patch
fsck_lfs to exit successfully without doing anything when given the -p
(bootup preen) option. If you really want to do fsck_lfs -p, you can
do fsck_lfs -f -p to make it go.
This has been sitting in my todo queue since February 2010 and was
ok'd by the committer at the time. The original commit was based on
this post:
http://mail-index.netbsd.org/tech-kern/2010/02/09/msg007306.html
and I remain unconvinced that it's the right thing, but we can at
least do it properly and not ship a sysinst with -7 that creates
permanently wrong fstab files.
Note that this may cause problems for anyone who's taken -p out of the
bootup fsck flags; but doing that is wrong, so don't.
2014-07-12 16:11:27 +00:00
699f31f847
Another infinite loop fix from OpenBSD from Tobias Stoeckmann:
...
You can download a "proof of concept" from my website:
http://www.stoeckmann.org/openbsd/poc.iso .
Take FAT1 and it'll infinitely loop. This fix will complete
your previous commit.
2014-07-11 14:59:53 +00:00
698f62dfb8
Well, if you set FSFIXFAT, better do it... Try running fsck on:
...
$ newfs_msdos -C 1M ./poc.fs
$ dd if=/dev/zero of=poc.fs conv=notrunc bs=1 count=1 seek=512
multiple times and see that it does not get fixed.
2014-07-10 21:06:20 +00:00
ffdedd8608
Bring in a regression for the previous fix from OpenBSD
2014-07-10 21:00:52 +00:00
0a21325ef0
From: http://marc.info/?l=openbsd-tech&m=140354518512871&w=2
...
more consistency checks
2014-07-07 19:04:37 +00:00
d7660c3645
From: http://marc.info/?l=openbsd-tech&m=140234174104724&w=2
...
Avoid off-by-one on FAT12 filesystems.
2014-07-07 18:46:45 +00:00
468753370f
From: http://marc.info/?l=openbsd-tech&m=140275150804337&w=2
...
Avoid infinite loops in cluster chain linked lists.
2014-07-07 17:55:53 +00:00
be4e2ccbba
From: http://marc.info/?t=140304310700005&r=1&w=2
...
When truncating cluster chains fix the length of the cluster head.
2014-07-07 17:45:42 +00:00
9ac4e1c7a3
mention requirements for custom kernels.
2014-07-06 14:41:24 +00:00
0580599ec4
Reorg docs, part 3:
...
Move the documents that are papers to /usr/share/doc/papers.
Give them suitable names (including the author and year).
The key property of papers that distinguishes them from documentation
is that they're historical: they're published at a particular time and
aren't updated or maintained. (Except cosmetically.)
We should only ship papers that are of interest to users, either for
historical perspective or because they're the original research
writeup of stuff that went into the system and is still pertinent.
The ffs papers clearly meet this standard; the other one here (about
passwords, in 1978) is probably past its sell-by date.
2014-07-05 19:23:15 +00:00
c3ab26950f
Rework /usr/share/doc.
...
Update the <bsd.doc.mk> infrastructure, and update the docs to match
the new infrastructure.
- Build and install text, ps, pdf, and/or html, not roff sources.
- Don't wire the chapter numbers into the build system, or use them in
the installed pathnames. This didn't matter much when the docs were a
museum, but now that we're theoretically going to start maintaining
them again, we're going to add and remove documents periodically and
having the chapter numbers baked in creates a lot of thrashing for no
purpose.
- Specify the document name explicitly, rather than implicitly in a
path. Use this name (instead of other random strings) as the name
of the installed files.
- Specify the document section, which is the subdirectory of
/usr/share/doc to install into.
- Allow multiple subdocuments. (That is, multiple documents in one
output directory.)
- Enumerate the .png files groff emits along with html so they can be
installed.
- Remove assorted hand-rolled rules for running roff and roff widgetry
and add enough variable settings to make these unnecessary. This
includes support for
- explicit use of soelim
- refer
- tbl
- pic
- eqn
- Forcibly apply at least minimal amounts of sanity to certain
autogenerated roff files.
- Don't exclude USD.doc, SMM.doc, and PSD.doc directories from the
build, as they now actually do stuff.
Note: currently we can't generate pdf. This turns out to be a
nontrivial problem with no immediate solution forthcoming. So for now,
as a workaround, install compressed .ps as the printable form.
2014-07-05 19:22:02 +00:00
b46d62604d
Remove reference to (no longer) fixed 4 mbyte kernel memory being reserved,
...
it is now dynamic.
2014-06-07 10:03:44 +00:00
804dc5f91b
Get rid of all sysc_init_field uses - initialize fields directly in C99
...
notation.
2014-05-16 12:22:32 +00:00
722b7feb56
Do not loop over children if a node is not marked as CTLTYPE_NODE.
2014-05-16 08:59:24 +00:00
424f4c982d
open the tty with O_RDWR|O_NONBLOCK. it seems valid to ask for
...
write permission when we're setting flags, and ucom(4) has an
existing workaround for a bug when O_RDWR is not used, and thus
ttyflags would not work for ucom devices.
2014-05-04 20:43:30 +00:00
bf3bbb4c0d
allow update
2014-04-30 01:33:11 +00:00
724e066fba
Increase alignement of the global "buf" variable to cover all pointers it
...
is casted too. Fixes a crash on arm v5.
2014-04-26 14:15:08 +00:00
ba42c3117b
Provide proper alignement for "buf" - it is casted to a struct fs pointer,
...
so it requires the same alignement.
Fixes crashes on armv5.
2014-04-26 13:23:49 +00:00
e6c9ef61dd
Fix volume name (Ed Maste)
2014-04-24 23:49:40 +00:00
802f624689
Iterate over fields of struct seperately to avoid warnings from pedantic compilers
2014-04-05 12:32:27 +00:00
12c14aedcc
the bug has been fixed.
2014-04-04 21:19:35 +00:00
b2fb66aceb
remove debugging.
2014-04-04 16:15:30 +00:00
57965cb9dc
-s:
...
If the optional arguments are not provided, they stay as before or
use the same defaults as the interactive mode, if new.
(feel free to improve)
2014-04-04 13:07:30 +00:00
ec456f9653
Fix a bug in previous and update detailed -s description.
2014-04-04 09:32:56 +00:00
dd17dc5d6c
Update SYNOPSIS.
...
Christos, please check.
2014-04-03 21:56:19 +00:00
52334fd887
Add the ability to "softroot" mount (i.e. mount root only when the raid
...
set contains the boot device), as opposed to "hardroot" (the previous
default which forces the raid to be root no matter what).
2014-04-03 18:54:10 +00:00
1e0f8240e6
instead of using ugly -1's make args optional
2014-04-03 17:07:11 +00:00
6449a2097b
default to something reasonable (like the interactive mode does) instead
...
of 0 when -1 is specified for the start or size.
2014-04-01 19:08:48 +00:00
aad6ef8bb5
Bring back the playstation2 port - now that a toolchain for it is
...
available again.
2014-03-31 11:25:47 +00:00
58dbdf3810
Allow -1 values in the -s <sysid>/<start>/<size> indicate use the previous
...
values. For example:
fdisk -f -i /dev/rsd0d # initialize mbr and create an msdos partition.
fdisk -f -u -0 -a -s 169/-1/-1 /dev/rsd0d # converts the msdos partition
to a netbsd one, and makes it active.
2014-03-30 22:18:13 +00:00
292aec205d
When the third arg to fwrite() is a size in bytes, then the second arg
...
should be 1. sizeof(*mbuf) happens to equal 1, but it's better not
to rely on that.
2014-03-28 18:27:14 +00:00
9761f1c2dc
don't use sprintf
2014-03-23 05:39:32 +00:00
deef948629
missed one
2014-03-23 05:38:14 +00:00
4db4c6282f
don't use sprintf
2014-03-23 05:36:58 +00:00
ccc32d7898
don't use sprintf
2014-03-23 05:26:23 +00:00
c4044741ea
don't use sprintf
2014-03-23 05:07:59 +00:00
6cb10275d0
Merge riastradh-drm2 to HEAD.
2014-03-18 18:20:35 +00:00
6b4d75e30b
Always print the MBR drive serial number, even if it's 0.
2014-03-10 15:42:51 +00:00
f6d86cb881
Make pointer NULL check non-fatal for a bogus condition.
2014-03-04 21:07:22 +00:00
473e93d0fc
Correct usage of clri.
2014-03-03 12:12:18 +00:00
6d3ceb1d61
Rename NetBSD/hp700 to NetBSD/hppa.
...
Unfortunately our VCS isn't very helpful here.
2014-02-24 07:23:38 +00:00
897b0b47db
Fix error message; argv[1] could be NULL
2014-02-09 13:40:59 +00:00
5a355fa389
Rename link to link_pkw to avoid shadowing the link syscall.
2014-01-19 22:31:13 +00:00
81c929ad04
Overwrite the seed file from the beginning, using pwrite(2).
2014-01-15 15:05:27 +00:00
8e1ba910ea
Fix arguments for write.
2014-01-15 10:13:25 +00:00
81c8b4d072
use __func__, EXIT_{SUCCESS,FAILURE}
2014-01-10 18:37:18 +00:00
bbfd34f128
give err() some reason to avoid:
...
sysctl.c:2713:5: error: zero-length gnu_printf format string [-Werror=format-zero-length]
2014-01-10 09:38:56 +00:00
6a0886ad81
perror is obsolete, use warn and add missing paren.
2014-01-08 01:56:20 +00:00
f2475e079d
Before scanning, check if the card is up. If it is not the case, exit
...
with some useful error message. Add some note about this fact in the man
page too.
2014-01-07 20:25:24 +00:00
88bc910896
PR bin/46743: mark the "next free cluster" value in the file system
...
info block as unitialized.
2014-01-05 12:52:39 +00:00
2873a037aa
New sentence, new line. Remove trailing whitespace.
2014-01-04 15:35:10 +00:00
ed70881960
Add crossreference to fd(4) as noted a while back in PR 45694. Bump date.
2013-12-30 08:43:22 +00:00
f28e660726
moved to external
2013-12-25 22:04:52 +00:00
b07680d7fe
Bump date for previous.
2013-12-19 07:49:50 +00:00
4fb24d0cac
Add the backup subcommand. It dumps the contents of the partition
...
tables as a plist, which is readable by the restore subcommand.
XXX restore subcommand forthcoming
2013-12-19 06:46:51 +00:00
6f2d9e3758
If we want to GUIDs to display with correct endian, it helps to decode it first.
2013-12-18 03:20:09 +00:00
81b1fb1df7
In all man pages that say:
...
The -H, -L and -P options are ignored unless the -R option is
specified. In addition, these options override each other and the
command's actions are determined by the last one specified.
Add:
The default is as if the -P option had been specified.
2013-12-17 09:54:08 +00:00
53733ab887
Explicitly state which partition was added/modified.
2013-12-10 01:05:00 +00:00
d860f590d4
Fix typo ("then" instead of "than")
2013-12-09 09:35:16 +00:00
918b300e20
Fix typo.
2013-12-09 09:22:44 +00:00
1cb2b94165
Add two new subcommands, "set" and "unset". These were inspired by
...
FreeBSD's gpart(8), but the code is all mine. The purpose of these
is to set and unset partition attributes.
2013-12-09 08:03:17 +00:00
66ad0e75ae
For the "show -i <entry>" subcommand, print Start and Size both in
...
terms of number of sectors and bytes.
2013-12-09 01:35:02 +00:00
2098c8504e
For the add and resize subcommands, change the -s option. If there is
...
no suffix, or the suffix is 's' or 'S', size is in sectors (as before)
otherwise size is in bytes.
2013-12-08 09:32:51 +00:00
e3e68bccc8
fix off-by-one error
2013-12-08 08:30:01 +00:00
024b3f7622
Don't attempt to create/resize an unaligned partition if the attempt
...
to create/resize an aligned one failed. This simplifies the code
and prevents surprises. If the user wants an unaligned partition
in the case where an aligned one fails, they can simply retry the
command without the "-a" option. This change was requested by
wiz@, and after some thought I agree with it.
2013-12-06 02:31:31 +00:00
16550bc8bd
Use MBR_PTYPE_ defines from <sys/bootblock.h>.
2013-12-04 20:15:51 +00:00
e22b4ebb4a
Mirror my changes of src/sbin/gpt/create.c 1.4 in migrate.c;
...
Use less bogus CHS addresses in PMBR.
With the ending head set at 0xff one machine I have will never leave
the initial startup screen if such a disk is present. Additionally,
Wikipedia suggests without citiation that 254 is the maximium allowable
value for the head, and this seems to be the case.
2013-12-04 19:59:47 +00:00
3d5220baa3
Bump date for previous.
2013-12-04 18:05:21 +00:00
26fd9dad41
Fix err/errx confusion, pointed out by rmind.
2013-12-04 15:10:11 +00:00
eb2a978b87
Provide variants of the -s option to allow limiting the tmpfs dynamically
...
at mount time to 1/Nth or to N percent of the available ram.
2013-12-04 13:30:35 +00:00
7e810dc605
Fix pasto in the !ufs2 case (use dp->dp1 and not of dp->dp2).
...
This would be a problem only when allocating a new data block and the
indir block is already allocated, which explains why automated tests didn't
find it.
Problem reported on tech-kern@ and fix tested by manu@.
2013-12-02 18:46:52 +00:00
925666ef9b
Add two new options:
...
-g which shows the GUID for a partition
-i which shows all the gory details for a particular option
XXX the output format of -i is subject to change
2013-11-30 19:43:53 +00:00
2b199b9458
when calling dehumanize_number() make sure the resulting number is >= 1
2013-11-28 01:37:14 +00:00
d873a92b9b
CID 1132762: Add error check for negative, to make zero-divide in module
...
impossible.
2013-11-27 20:40:48 +00:00
bb7996ed1a
CID 1132764: Bogus test
2013-11-27 20:34:34 +00:00
9299334f79
Remove FreeBSD specific code as per message to tech-userlevel.
2013-11-27 01:47:53 +00:00
e066617c02
Only skip past _PATH_DEV if it is actually present.
2013-11-23 08:59:04 +00:00
9ceccfb63b
change the "-b blocknr" parameter to accept a "human number"
2013-11-22 04:21:02 +00:00
d883a91427
bump date
2013-11-22 03:51:06 +00:00
4f22d16faa
In the manpage:
...
- s/-b number/-b blocknr/
- s/-s count/-s sectors/
- s/-p count/-p partitions/
In the program:
- s/-b lba/-b blocknr/
- s/-s lba/-s sectors/
This makes the documentation in the manpage and the program consistent
and makes it more clear what the parameters are. Also, "-s lba" was
just plain wrong since LBA stands for Logical Block Address[ing], and
the -s option didn't represent any kind of address, but rather a size.
2013-11-22 03:50:05 +00:00
00996309f7
shrunk.
2013-11-20 08:11:36 +00:00
0a08058311
Add a resize command. This command was inspired by FreeBSD's gpart(8),
...
but the code was written by myself.
2013-11-20 08:08:47 +00:00
49ca570b23
delete an errant where it is obvious what the code is doing
2013-11-19 22:41:43 +00:00
477692ee49
When setting a label on the new partition, be sure to set the label
...
in the secondary partition table as well.
2013-11-19 19:10:29 +00:00
a3d649686c
update synopsis for add subcommand
2013-11-19 05:07:40 +00:00
650728b4e3
Add two new options to the "add" subcommand:
...
-a alignment -- attempt to align the start and size of the partition
-l label -- supply a label for the partition
These options were inspired by FreeBSD's gpart(8) command, but the
code was written by me.
2013-11-19 05:03:41 +00:00
611f94995e
CID 1125874: Fix memory leak
2013-11-13 21:25:40 +00:00
f55ff5e8dd
vax specific gcc 4.8.1 hacks
2013-11-09 21:39:27 +00:00
997b1a5c45
put instruction generation bug for the vax for 4.8 too
2013-11-09 16:01:58 +00:00
88644df51c
Bring tunnel src_addr and dst_addr on the same line
2013-11-09 13:10:35 +00:00
beafc35b81
Remove esis reference
2013-11-05 07:42:48 +00:00
c2ebc84464
Add a reference to secmodel_extensions(9), to make it a little easier to
...
figure out how to enable mounts for unprivileged users. (Why don't we
just explain vfs.generic.usermount in the mount(8) man page?)
Also add another example of different ways in which the "special"
argument is interpreted by different file systems: mount_tmpfs(8)
ignores it.
2013-10-31 07:37:06 +00:00
958a129dbd
-recognize CF cards by the magic value in inquiry data
...
-kill CFG_ATAPI_MASK, didn't see anything in the specs supporting
that it exists
2013-10-30 15:37:49 +00:00
6cfd1a95ed
Mark usage as dead.
2013-10-29 16:11:15 +00:00
99ed7cd168
link luactl(8) to the build
2013-10-28 19:05:21 +00:00
f60aa973c9
cosmetic fix from drochner@
2013-10-26 20:31:23 +00:00
6737b686a3
bump date for previous
2013-10-24 13:00:21 +00:00
0fa457fe55
remove lua class
2013-10-24 10:36:25 +00:00
34523e4b09
- markup
...
- typo; the label command labels partitions, not remove them
- migrate -s isn't applicable to NetBSD
- add information about the space required for migration
- add a "gpt show -l" example
2013-10-24 06:59:03 +00:00
matt