2bbaeef8cc
Fast and dirty fix to avoid panics during autoconf of KFQSA DSSI disks.
...
Controller errors showing up can't be handled anyway.
1997-03-12 19:42:30 +00:00
2b8ac648a3
Frob pages before trying to map them, to be sure they exist.
1997-03-09 16:00:06 +00:00
b64bca2999
Fixed bug that caused d partition being treated as c.
...
RAW_PART is 2, not 3.
1997-03-09 15:55:58 +00:00
9bf924ecc4
Be able to find out if we are booted from network.
1997-02-27 19:43:26 +00:00
2de163471e
Minimal changes to adapt to removal of NCR5380_PERMIT_RESELECT.
...
This driver should be updated to allow per-target control over
disconnect/reselect, but I will leave that to the port masters.
1997-02-26 22:29:08 +00:00
5e35ea57c5
Patches to make VS2000 to work. From Ari Suutari.
1997-02-26 18:38:19 +00:00
115b6d92fa
Define ALIGNED_POINTER
1997-02-24 23:16:53 +00:00
e86bc96653
Basic change to cpu-config code. This will make support of new
...
cpu types much easier.
1997-02-19 10:04:09 +00:00
c3aeacf957
unsigned -> long to match ddb change.
1997-02-16 20:37:29 +00:00
657c7b5d55
This file has been obsoleted for ages.
1997-02-16 17:40:46 +00:00
9efff168a1
Remove ::
1997-02-12 18:07:53 +00:00
cb344cfe97
ra disks is DV_DISK, not DV_DULL.
1997-02-12 18:02:47 +00:00
40f0692085
s/tms/mt/
1997-02-12 18:00:42 +00:00
e7d1921239
Remove bogus prototypes.
1997-02-12 17:58:56 +00:00
e42e582ebb
Fix so it works with root over NFS.
1997-02-12 17:57:39 +00:00
c44e241f49
Add a forgotten #ifdef DDB
1997-02-12 17:55:54 +00:00
f5f92a31ca
Walk a step closer to more intelligent User PTE handling.
1997-02-12 17:52:59 +00:00
2bb5ceb3e0
Improve sub-type identification of the CVAX CPU, for later cache handling.
1997-02-12 17:50:36 +00:00
ea3925f508
FIXUP_PC_AFTER_BREAK now takes an arg of type db_regs_t *
1997-02-06 21:16:28 +00:00
a1d8a4570c
Support for DL11 (-compatible) async ctlr.
...
Written by Ben Harris (bjh@mail.dotcom.fr ).
1997-02-04 19:13:15 +00:00
19d153fc48
Nuke some options GENERIC residue.
1997-02-04 04:57:10 +00:00
0b3a46d6b3
Nuke some GENERIC residue.
1997-02-04 04:31:55 +00:00
739f23a219
This file is obsolete; this information is now generated by config(8).
1997-01-31 05:12:49 +00:00
9b683dc125
Use new machine-independent setroot().
1997-01-31 02:13:40 +00:00
003dad8fdd
Pass a struct device ** down to the functions that find the boot device.
1997-01-31 02:12:31 +00:00
fc9c10afb7
Update prototypes to match new calling convention of functions that
...
find the boot device.
1997-01-31 02:11:51 +00:00
2b43c7eab7
Adopt for new file system and root spec grammar.
1997-01-31 02:10:33 +00:00
b170998941
"md" is declared in sys/conf/files, now.
1997-01-21 09:50:17 +00:00
2b8e7e782a
std.vax readded, shall be here anyway.
1997-01-12 12:38:56 +00:00
09adf20559
Need a couple of extra #ifdef's to compile.
1997-01-11 13:50:20 +00:00
3026c5e35e
Put in another external declaration.
1997-01-11 11:46:43 +00:00
eb0bc83700
Update due to changes to uba/mscp functions.
1997-01-11 11:34:39 +00:00
54e8120422
Oops, forgot an printf.
1997-01-11 11:31:57 +00:00
2a826b413f
Prototype updates.
1997-01-11 11:31:26 +00:00
52c3b92063
Put common map in code here instead of lots of places.
1997-01-11 11:24:51 +00:00
3774ec6c5c
Update due to prototype changes.
1997-01-11 11:23:09 +00:00
2b34ded4f8
Many minor bug fixes; mscp subsystem seems to work rather stable now.
1997-01-11 11:20:31 +00:00
59d5be04e9
Add EXEC_AOUT and EXEC_SCRIPT. std.vax not needed anymore; removed.
1997-01-11 11:15:38 +00:00
7bf599379e
Prototype change of scanc needs change here also.
1997-01-11 11:07:52 +00:00
f98e31628a
#define MAXBSIZE to some nice value.
1997-01-11 11:06:17 +00:00
aed485cdf2
add 'pseudo-device ccd' where necessary; PR kern/1830.
1997-01-11 09:11:37 +00:00
c71a371532
use pseudo-device ipfilter, not ipl.
1997-01-07 11:35:01 +00:00
3896082c5a
Add rd, sd, cd, md, st, ss, uk, ch and ipl device entries.
1997-01-05 18:49:12 +00:00
96acdadef7
First step inn removing config_scan() and the hacks that gave devices
...
on indirect-config busses a (permanent) softc that they could share
between 'match' and 'attach' routines:
Define __BROKEN_INDIRECT_CONFIG so that old autoconfiguration
interfaces are used, until drivers are converted to use the new
interfaces (actually, converted back to use the _older_ interfaces)
which prohibit indirect configuration devices from receiving a softc
in their match routine that they can share with their attach routine.
1996-12-05 00:13:47 +00:00
4c1d96de78
* Replace explicit -O2 in CFLAGS with COPTS macro. Default COPTS?= -O2.
...
Lets users over-ride with makeoptions COPTS="..." in kernel config files.
Leave `mandatory' flags (like -msoft-float which on m68k enforces no
FP in kernel) in CFLAGS.
1996-12-01 06:12:25 +00:00
9da5f60715
PROF -> GPROF
1996-11-30 02:48:57 +00:00
16b48272c4
Define _BSD_CLOCKID_T_ and _BSD_TIMER_T_
1996-11-15 22:38:45 +00:00
23ff20cd74
Use bitmask_snprintf().
1996-11-15 03:32:46 +00:00
f6290552bf
Use bitmask_snprintf().
1996-11-15 03:11:19 +00:00
8a3333b2a9
Fix an inconsistency that came in with Lite: setrq() was renamed to
...
setrunqueue(), but remrq() was never renamed. Rename remrq() to
remrunqueue().
1996-11-06 20:19:19 +00:00
150c33e60b
Use ${INSTALL}.
1996-10-18 05:55:26 +00:00
e37692f04d
backout previous kprintf change
1996-10-13 03:29:05 +00:00
16b74d2c00
use in_addr_t and in_port_t
1996-10-13 03:28:00 +00:00
eb314d8358
printf -> kprintf, sprintf -> ksprintf
1996-10-11 01:50:21 +00:00
472889f8e4
moved to aout_machdep.h (via repository copy)
1996-10-08 12:57:37 +00:00
b3ffba62a6
Move strip(1) flags into a separate variable, so that $STRIP can
...
be passed to subordinate make(1)s. Remove $TOUCH. Add HOSTED_CC,
HOSTED_CPPFLAGS, and HOSTED_CFLAGS, and use them when depending genassym.
1996-09-09 21:06:55 +00:00
2bc736661a
Implement poll(2).
1996-09-07 12:40:22 +00:00
fc3def4096
Remove duplicate declarations of LKM functions and macros.
1996-09-05 15:46:22 +00:00
b3eac79b64
tty stop functions really should return void, not int, and certainly not both.
1996-09-02 06:43:16 +00:00
30a617c634
Wrap the default definition of `S' in `.ifndef'.
1996-08-31 21:40:47 +00:00
71ad30d0e9
(1) set scsi_link channel to either the appropriate channel (if a
...
multi-channel driver), or to SCSI_CHANNEL_ONLY_ONE if a
single-channel driver.
(2) use scsiprint() rather than a locally-defined autoconfig print
function, and kill any locally-defined print function.
1996-08-28 18:59:15 +00:00
2a73ef60b7
change cfprint_t type definition to take a const char *, rather than
...
a char *, because that's what was really intended, and because
if the print function modifies the string, various things could become
unhappy (so the string should _not_ be modified).
1996-08-27 21:53:46 +00:00
1c367d4761
Modify bus code arguments. Cleanup.
1996-08-20 14:19:41 +00:00
2e489636e4
Use common routine to map in pages before DMA'ing.
1996-08-20 14:15:04 +00:00
c5db4b8756
Support for cmi bus on 11/750.
1996-08-20 14:13:50 +00:00
34d020edd2
Change uba* functions to take pointers, rather than uba unit numbers.
1996-08-20 14:07:33 +00:00
1be0c00cf0
Add another parent bus for 11/750 (cmi). remove mtc.c.
1996-08-20 14:05:16 +00:00
9f1148c9c4
Use the same device driver for both uda and mtc. Actually, the only
...
difference is vcid. The unit names must differ, so that it is possible
to distinguish them at autoconf time.
1996-08-20 13:49:15 +00:00
3a504ef134
Modified to get cleaner match/attach code for different parent buses.
...
Fix so that resource wait queueing works.
Changed all functions to take a pointer to uba_softc instead of unit
number, except for ubareset(). This must be done later.
1996-08-20 13:37:57 +00:00
4a1279de25
Import framebuffer drivers from 4.4-Lite2 as the root for NetBSD drivers.
...
Only change from Lite (or lite2, qv.c and qd.c do not change) is adding
NetBSD RCS ids.
1996-08-18 21:28:53 +00:00
558d72128e
Put into . Remove hooks for `config-dependent' and
...
`device-driver' flags.
1996-08-12 00:51:24 +00:00
cf67f29afe
* Add a HOSTED_C_C variable, which strips `-p', `-pg', and
...
`-nostdinc', and use it when building genassym.
* Use `-nostdinc' just to be sure we're self-contained.
1996-08-10 06:07:57 +00:00
f94052ed3a
* Define CWARNFLAGS and MKDEP in some moderately consistent fashion.
...
* Make S expand to an absolute path at compile time.
* Use `-S' rather than `-x' to remove debugging symbols.
* Garbage collect unused variables.
* Reverse a handful of port-specific changes that do not correspond to
the common build model and are not needed.
1996-08-10 05:29:24 +00:00
5abbf990f3
Change reboot(2) to take two arguments: bootopt like normal and also
...
a boot string for firmware that can do this, such as the SPARC and
the sun3 models. It is currently silently ignored on all other
hardware now, however. The MD function "boot()" has been changed to
also take a char *.
1996-08-09 10:30:23 +00:00
fdcabd43da
Do not use any emulated insn's in boot program. (in this case cmpc3).
...
Add strncmp to get around this.
1996-08-02 16:18:39 +00:00
5e04d04d68
Add support for booting Vaxstations; from MFM and SCSI. (PROM-based boot).
1996-08-02 11:21:41 +00:00
cbca944854
LANCE driver for vaxstations.
1996-07-20 19:01:55 +00:00
88a147e51b
CPU determine code. ts driver converted to new config. May work, untested.
1996-07-20 19:00:22 +00:00
15409eef53
Update config files for VAX8200 and VAXstations.
1996-07-20 18:56:58 +00:00
38b1264285
SCSI and ST506 support for the VAXstation architecture.
1996-07-20 18:55:09 +00:00
a8f6512e6d
VAXstation CPU and serial console support.
1996-07-20 18:29:49 +00:00
7707223bc4
Locore changes for VS and VAX8200.
1996-07-20 18:20:42 +00:00
1abb214901
Bugfix causing erroneous address displaying.
1996-07-20 18:17:29 +00:00
fd3f596fa3
Reflect the changes of CPU determination. Add support for VAXstations.
1996-07-20 18:14:41 +00:00
aab842833e
Put in rd (ST506 disk), sd and st.
1996-07-20 18:08:19 +00:00
a6c464a5f7
Add vmapbuf/vunmapbuf for VAXstations that need them.
1996-07-20 18:02:47 +00:00
caff7b03d4
Numerous changes to be able to put Bertram Barth's VAXstation support in.
...
(Some) Support for VAXstation 2000/MicroVAX 2000, VAXstation 3100/76.
1996-07-20 17:58:12 +00:00
7ac59ffe68
Reworked time handling; now also handles clock chip CPUs correctly.
1996-07-20 17:35:41 +00:00
5b0992267c
Support for VAX8200; the ka820/ka825 CPUs.
1996-07-20 17:33:06 +00:00
c828b7ce6d
Support for the VAXBI bus, and KDB50 device driver (MSCP disk).
...
Parts of this written by Chris Torek at the beginning of time.
1996-07-19 14:26:52 +00:00
ce30ddd46b
Obsoleted by now.
1996-07-15 11:50:40 +00:00
640bda0d46
Put in boot support for VAX 8200.
1996-07-15 11:11:01 +00:00
a5b04afcd8
Automatic changing of root device after boot now works.
1996-07-11 19:33:50 +00:00
e9d6f189c1
Add MSCP tape to this file.
1996-07-10 23:51:53 +00:00
02d0803c80
Add spl4 - spl7 macros, easy to use when playing with buses.
1996-07-10 23:51:08 +00:00
4d687fb39d
Slow down DELAY for 11/785.
1996-07-10 23:48:42 +00:00
9c24877b23
Remove tmscp protocol definition file; which was actually the same
...
as the mscp protocol.
1996-07-10 23:44:17 +00:00
5d6b8719b2
Remove old (tape-only) tmscp driver. Add new uba/qba driver
...
for common MSCP routines.
1996-07-10 23:42:05 +00:00
cb355cf8d5
Add support for tape drives. More extensive error checking.
1996-07-10 23:35:58 +00:00
1e3ab3cb1e
uda -> ra and tms -> mt (mscp changes).
1996-07-01 21:50:29 +00:00
d969a7e16e
Changed data structures due to removal of old config system.
1996-07-01 21:31:36 +00:00
f6fb3bf1ab
Change to new config and to support new MSCP system.
1996-07-01 21:24:48 +00:00
f85a693859
Update to match new MSCP device handling.
...
Remove support for old config system.
1996-07-01 21:07:25 +00:00
dfdb4e6863
Remove old config support code.
1996-07-01 20:48:58 +00:00
f19e0bacab
Rewritten and moved to vax/mscp.
1996-07-01 20:47:27 +00:00
60af617a5d
Totally new approach for MSCP devices; they are now handled more like SCSI.
...
All Unibus dependencies are removed.
Can support different controllers on different buses.
Allows cloning of devices.
TODO:
Write support for MSCP tapes.
1996-07-01 20:41:30 +00:00
97756165b8
Remove code that took care of old config devices. Don't support
...
old config anymore, all devices should use new config by now.
Add structures to handle DMA devices using new config.
Fixed bug that caused unwanted ubareset's on 11/780.
1996-07-01 20:17:56 +00:00
352d972c94
locc() is unused. Remove it from the machine-independent kernel interface.
1996-06-10 15:33:33 +00:00
7cbd855ad6
Fixed all (proto)type errors. Fixes PR 2377.
1996-05-19 16:43:02 +00:00
f4c525a623
Update from Ken Wellsch.
1996-05-19 16:27:02 +00:00
6bd144b812
Add DZ-11 to GENERIC & files.vax.
1996-05-19 16:25:23 +00:00
540f9550c0
Make `make depend' work for libraries.
1996-05-11 16:11:30 +00:00
69351e2be6
Changed struct ifnet to have a pointer to the softc of the underlying
...
device and a printable "external name" (name + unit number), thus eliminating
if_name and if_unit. Updated interface to (*if_watchdog)() and (*if_start)()
to take a struct ifnet *, rather than a unit number.
1996-05-07 01:35:48 +00:00
a24af7a7c2
Added prototypes to everything. Made all files compile with -Wall.
1996-04-08 18:32:26 +00:00
86c328d230
Drivers for DZ11/DZV11/DZQ11 serial cards.
...
Written (mostly) by Ken Wellsch.
1996-04-08 17:22:20 +00:00
83f9bdc359
update for the fact that config_found() and config_rootfound() now
...
return pointers. (Check vs. NULL, rather than just boolean tests.)
1996-04-04 06:25:00 +00:00
da9fca44a5
CVS trouble.
1996-04-02 13:52:28 +00:00
8fa15eb73f
Ubareset are now possible, devices that wants it now set it up
...
during autoconfig. ifubareset (if_reset) no longer used, actually
it's just a normal ubareset and is now handled like that.
1996-03-18 16:47:24 +00:00
6275c70064
Convert all devices according to the changes to config.
1996-03-17 22:56:15 +00:00
dfaa8f2e96
Update from Ken Wellsch: The DHU driver can now handle DMA transfers.
1996-03-17 22:51:48 +00:00
3b5cb56887
Do not have debugging enabled by default.
1996-03-17 22:49:55 +00:00
b7cf2432a0
Fix type clashes.
1996-03-17 22:44:48 +00:00
f9ee92c45a
Support installation of /usr/mdec files.
1996-03-16 11:03:11 +00:00
33aad32f37
Accept adapter numbering in boot.
1996-03-16 11:02:28 +00:00
2ce5f1478b
Add _BSD_WINT_T_ definition so we can handle wint_t type added in NA1.
1996-03-16 01:31:45 +00:00
25b31cbc91
fdopen -> filedescopen
1996-03-14 21:31:56 +00:00
f01a5dd8cc
We lost declaration of kernel_pmap_store somewhere, put it back.
1996-03-09 23:39:51 +00:00
3a07f941ba
Check on which SBI we are frobbing, not always 0.
1996-03-09 23:38:34 +00:00
24b2b310ae
Add support for ktracing syscalls.
1996-03-09 23:37:20 +00:00
4ee5419b8a
Panic on SBI fault.
1996-03-09 23:36:40 +00:00
c7282ed159
Change NTU to NHT.
1996-03-09 23:36:09 +00:00
ba7706dd3c
Files to generate usable console RL02 packs on 8600.
1996-03-08 12:41:33 +00:00
3ac9ff6af4
Support for the RL02 disk at the PDP11 frontend console added.
1996-03-08 12:32:47 +00:00
6e51b1e47e
Support for VAX 8600/8650 added. Works with lots of Unibus adapters,
...
and will probably work with Massbus adapters as well. (Not tested,
but it's the same code as for 11/780). Ubareset's may cause crashes
on 8600 also like 11/780, but they are more uncommon. No support
for console RL02 yet, but it's likely to come.
1996-03-07 23:22:34 +00:00
3f09ddf89f
Fix of MicroVAX clock chip code, so that time sets right after reboot.
...
Fix done by Ken Wellsch.
1996-03-07 23:03:03 +00:00
18ec26aa21
add _MACHINE and _MACHINE_ARCH, which are like MACHINE and MACHINE_ARCH,
...
execpt without quotes. meant to be __CONCAT()ted for easy #includes
of machine-dependent headers for MI code (e.g. for the MI ISA/EISA/PCI/TC
bus code).
1996-03-04 05:04:10 +00:00
c2ce0848e2
Added ns_cksum.c.
1996-03-03 11:56:33 +00:00
c76bb64058
Machine-optimized version of ns_cksum.c.
1996-03-03 11:54:37 +00:00
c22fc0bce4
Enable label_t.
1996-03-03 11:21:31 +00:00
e82da18ec2
Fix include file ordering.
1996-03-03 11:18:59 +00:00
f2bcddae7f
Fix fuswintr/suswintr arguments to match prototype.
1996-03-03 11:17:59 +00:00
7ade5ebd76
Files needed to create boot floppies for 11/780, most of them
...
taken directly from 4.4BSD.
1996-03-02 17:57:34 +00:00
ffc8953cd7
Change config delay's to more reasonable values.
1996-03-02 14:29:23 +00:00
5d89814116
Changes due to 11/780 support. Raise splimp() to BR7.
1996-03-02 14:27:52 +00:00
cef093b42e
Add VAX780 support to the boot program.
1996-03-02 14:22:57 +00:00
8fbcb8ce5a
Add VAX780 and DHU11 to the GENERIC file. Put the corresponding
...
file lines in files.vax.
1996-03-02 14:19:47 +00:00
10fe8f1971
All devices can now be in GENERIC.
1996-03-02 14:14:05 +00:00
827892239a
Add support for DW780. Note that ubareset's don't work properly.
...
This is not a problem on other Unibus adapters, but DW780's do
ubareset's more often. This needs to be fixed by someone someday.
1996-03-02 14:09:57 +00:00
89e32834cd
Fix some too long delays. Set some structs volatile that otherwise
...
caused hangs during autoconfig.
1996-03-02 14:06:03 +00:00
508f81daca
Support for VAX 11/780 - 11/785 system types added.
...
There are no support (yet) for the RX01 console floppy,
even if it is actually needed to create boot floppies.
(The arff utility is also missing, so...)
1996-03-02 13:45:34 +00:00
a14bb8a710
Add a #ifdef TUDEBUG around a printf statement.
1996-03-02 13:41:24 +00:00
c45af1134a
Unibus/Q22 bus device driver for DHU-11 serial card.
...
Written by Ken Wellsch. (kcwellsc@math.uwaterloo.ca )
1996-03-02 13:30:53 +00:00
1c5d7babe5
Clean up tabbing/spacing in defns of MACHINE, MACHINE_ARCH, and MID_MACHINE.
1996-03-01 23:30:08 +00:00
3d67685d36
Do not build vnode_if.[ch] for each kernel. Build them once, like the
...
various syscall sources/headers, and just compile them. From PR 2142, OK'd
by mycroft.
1996-02-29 20:54:58 +00:00
2ce52ae489
Define build programs with `?=', so they can be overridden with `makeoptions'.
1996-02-26 02:53:20 +00:00
1376f92db9
Add routine to convert phys device number to kernel unit number.
...
Allow to set disklabel area writable.
1996-02-24 21:22:54 +00:00
f2aaea55c2
Make setroot() grok where we boot from even if it is hp disks.
1996-02-24 21:20:01 +00:00
df5a5e9485
Remove __FORK_BRAINDAMAGE, and the reason to why it was there.
1996-02-24 15:17:35 +00:00
2294cbd022
Fixed bug causing DMA to user stack from Massbus disks to give segfaults.
1996-02-23 17:54:33 +00:00
2aa22f8fbf
Allow rewriting of disk label after newfs.
1996-02-23 17:29:01 +00:00
aeaef139aa
Console TU58 device driver for 11/750 added.
...
It cannot write tapes yes, but reading works OK.
1996-02-17 18:48:53 +00:00
90b84d2da5
Add standalone driver for TU58 (DECtape II). Now initial installation
...
from TU58 on 11/750 is possible.
Change types on pte pointers, due to the change of pte's from
int to struct pte.
1996-02-17 18:23:18 +00:00
5025b0f9c9
Definition file for RSP (Radial Serial Protocol) used by DECtape II.
1996-02-17 18:14:50 +00:00
2395bee98d
Much faster copyin/copyout subroutines, written by Ken Wellsch.
...
Improved user-space network I/O (like ftp) with about 1.7 times!
1996-02-13 17:45:32 +00:00
27a9f5bd9c
Fix #include syntax.
1996-02-13 06:56:58 +00:00
183d234ae4
Add prototypes.
1996-02-11 13:47:55 +00:00
4cafd3d7d2
PAGE_SIZE should be PAGE_SHIFT. Really ugly bug!
1996-02-11 13:46:23 +00:00
26d151d2bb
Prototype for delay().
1996-02-11 13:45:37 +00:00
dfecf19e9f
Fix cpu_sysctl() arguments to be like prototype.
1996-02-11 13:43:37 +00:00
550f120337
Fix things that -O2 broke. Cleanup.
1996-02-11 13:41:35 +00:00
bb75a13fbb
Cleanup & convert to KNF.
1996-02-11 13:39:54 +00:00
998626f339
Add VAX650, mba, hp, ts. Change uba to be *'ed.
1996-02-11 13:28:25 +00:00
29719357a6
Remove csralloc(), not usable anymore.
...
Add ubasetvec() to steal interrupt vectors for device drivers that
need more than one vector. Add prototype for it.
1996-02-11 13:24:50 +00:00
d2dadd65df
register -> volatile in some places, to make it work OK with -O2.
1996-02-11 13:22:30 +00:00
435182d4bb
Device drivers for massbus adapters and massbus disks.
...
Works with RP04/05/06/07 disks.
1996-02-11 13:19:33 +00:00
d24ffd421f
Support for ka650, tailored in_cksum and removal of a couple needs-count.
1996-02-09 15:24:18 +00:00
753fe3a25a
Fix mkdep problems due to missing flags.
1996-02-09 02:21:13 +00:00
d5b078f3e6
Clean this up a little, and make it compile with `traditional' cpp.
1996-02-03 01:43:41 +00:00
5bc076e17e
Use `-traditional-cpp' when building .s and .S files.
1996-02-03 00:43:50 +00:00
4f952cf1e7
#ifdef a call to kdb_trap() on DDB.
1996-02-02 23:19:43 +00:00
cfefb732a0
Fix type errors.
1996-02-02 22:57:43 +00:00
dcd66e9f4d
Clone these, and fix many bugs.
1996-02-02 20:08:17 +00:00
5d668ff961
ASSEMBLER -> _LOCORE
1996-02-02 19:08:33 +00:00
0103e26fd8
Fix #includes.
1996-02-02 18:59:16 +00:00
9d9a70a5a2
Fix #includes.
1996-02-02 18:05:36 +00:00
cec913603e
Don't special-case conf.c.
1996-02-02 13:38:05 +00:00
88e512b693
LOCORE -> _LOCORE
1996-02-01 22:28:24 +00:00
348b7f3d87
Remove PSL_ALLCC definition. Was commented out anyway.
1996-01-28 12:32:21 +00:00
1bc66055fb
Add uvtopte() macro, to get user pte address easy.
1996-01-28 12:31:24 +00:00
7a489b8529
Change struct trapframe to also contain stackpointer.
1996-01-28 12:30:13 +00:00
84c675c572
Change void* to struct pcb* for page table pointers.
1996-01-28 12:27:19 +00:00
2c8ca06774
Be able to handle debugger traps from kernel.
1996-01-28 12:24:33 +00:00
27a6a01b3a
Save USP when trapping from userspace.
...
Change register save structs according to this.
Be compatible with the way old init passes flags (in registers).
1996-01-28 12:22:49 +00:00
d8e53d2958
Fix bug causing the kernel symbol table not to be loaded.
...
Save all registers on panic().
1996-01-28 12:18:06 +00:00
2b9d8d6e77
Take away unneccessary code from i386? port.
1996-01-28 12:14:48 +00:00
57d63d564f
Fix bug causing ^[ to be sent when returning from DDB.
1996-01-28 12:11:57 +00:00
8cf6ff80bd
Make use of the new disk struct when attaching disks.
...
Don't rely on UBA's; we do not always want them.
1996-01-28 12:09:34 +00:00
f13a276ec8
Handle DDB traps different when we get a panic.
...
It's more interesting to know the CPU state when panic was called
than in the Debugger() function.
1996-01-28 12:05:55 +00:00
21ddc94849
bpf, vnd & tun added.
1996-01-28 11:46:54 +00:00
a48ecd6750
A 'printf' describing CPU type was forgotten.
1996-01-28 11:45:07 +00:00
9a83d85375
DDB disassembly is fixed and now works good. Code written and
...
contributed to Ludd by Bertram Barth.
1996-01-28 11:31:25 +00:00
0c5975cdd3
Changed to work correctly with both K&R and ANSI cpp.
1996-01-06 18:37:35 +00:00
2defb2f857
Much improved in_cksum, VAX dependency written by Bertram Barth.
1996-01-06 16:50:55 +00:00
782e22bb8b
Device driver for TS11/TSV05 tape devices.
...
Written by Bertram Barth, based on TMSCP device driver.
1996-01-06 16:43:46 +00:00
2fce159ff8
Changed name of sigaltstack's ss_base field to ss_sp to match XPG4.2 and
...
traditional usage.
1996-01-04 22:21:33 +00:00
1dab4709a3
Changes requested by Charles Hannum.
1995-12-31 15:05:19 +00:00
d9c6db08da
Don't declare _mcount as static, gcc will optimize it away then.
1995-12-31 12:15:58 +00:00
d987547daf
An '&' missing in splx macro; causing that sometimes didn't
...
the interrupt level get set.
1995-12-30 21:37:31 +00:00
d714597971
Don't include de.h; it doesn't exist anymore.
1995-12-30 19:42:16 +00:00
17eb6e2bc1
Move the old-style disk instrumentation "structures" to a central location
...
(sys/kern/subr_disk.c) and note that they should/will be deperecated.
1995-12-28 19:16:31 +00:00
7c65ab14a0
Create libkern as a .a instead of a .o file.
1995-12-28 15:27:21 +00:00
cd8fe86bcb
Make the type of __builtin_va_list a long.
1995-12-26 01:16:24 +00:00
0c00214737
Use __builtin_va_alist.
1995-12-26 00:19:09 +00:00
fa887628d8
Stylistic changes.
1995-12-25 23:15:31 +00:00
d1de691efb
Stylistic changes.
1995-12-25 22:22:02 +00:00
0199e002ad
Update for GCC 2.7, and fix bugs.
1995-12-25 21:41:08 +00:00
3da4b2a160
The IST_* and IPL_* constants are not bus-specific; don't treat them as such.
...
Change splimp -> splnet in Ethernet, ARCnet, and FDDI drivers.
1995-12-24 02:29:35 +00:00
341c12ff46
Generation of old config structs for de/qe cards removed.
1995-12-16 15:05:03 +00:00
e7aba578d3
MicroVAX III support added.
...
Dummy match/attach routines for tmscp.
Conversion of uda.c towards new config.
1995-12-13 19:02:47 +00:00
56ad9078eb
MicroVAX III support added.
1995-12-13 18:57:57 +00:00
cf6e6c6ed4
waitabit() macro removed.
1995-12-13 18:56:01 +00:00
6ab4fc540f
Prevent against multiple includes.
1995-12-13 18:55:27 +00:00
dc9996e83e
A complete SCB struct included.
1995-12-13 18:54:56 +00:00
4f22cd5a71
Type change: u_int hoppaddr to void (*hoppaddr)();
1995-12-13 18:54:03 +00:00
902fd4cddf
PG_SHIFT -> PGSHIFT.
1995-12-13 18:53:15 +00:00
3307a6f67a
CPU dependent code moved out of cpu independent modules.
1995-12-13 18:50:11 +00:00
b7d05bc287
u_int -> pt_entry_t.
1995-12-13 18:47:59 +00:00
2962c5f6d6
MicroVAX III support added; now runs on VAX 3600/3800/3900 platforms.
1995-12-13 18:45:52 +00:00
a5c9872c60
Unneccessary.
1995-12-12 15:40:04 +00:00
292120bf63
Define __FORK_BRAINDAMAGE.
1995-12-09 04:41:41 +00:00
31f199d4e6
Added earlier forgotten MACHINE_ARCH, pointed out by Arne Henrik Juul.
...
Cleaned up a bit.
1995-12-04 22:32:53 +00:00
45d824de05
DELUA/DENUA & DELQA/DEQNA Ethernet adapters converted to new config.
1995-12-01 19:37:55 +00:00
2e654caa73
UBA converted to new config. (uba's now can be *'ed). Bug causing
...
DMA writes to nonexistent memory pages fixed. Code for old config
of non-mass-storage devices removed. (they now must use new config).
1995-12-01 19:22:56 +00:00
0cd793449e
merge in changes from 1.1 release branch
1995-11-30 00:56:23 +00:00
826b97635f
No longer needed; interrupt vectors now dynamic allocated.
1995-11-12 15:19:49 +00:00
bfc2ca40b8
Function call definition on stack. (calls frame)
1995-11-12 15:07:30 +00:00
763fd0a011
Macros for locore mapping added.
1995-11-12 14:41:41 +00:00
d96cac4b8e
pt_entry_t now struct pte. cleanup.
1995-11-12 14:40:26 +00:00
e6db353726
extern struct scb *scb; added.
1995-11-12 14:38:31 +00:00
7aac03e745
11/750 specific things moved to ka750.h
1995-11-12 14:37:18 +00:00
2a23f39e82
struct ivec_dsp for interrupt vector allocation added.
1995-11-12 14:33:11 +00:00
f51faf62ac
Dynamic allocate uba_softc and interrupt vectors.
...
Allow for more that one uba.
1995-11-10 19:25:46 +00:00
d16c357ab9
A couple of CPU specific defines moved away.
1995-11-10 19:14:43 +00:00
c9be4b2e09
Removed some warnings.
1995-11-10 19:09:56 +00:00
42edf9d2b4
_idsptch added, _physcopypage removed.
1995-11-10 19:08:59 +00:00
eca544e6fc
sysarch() -> sys_sysarch.
1995-11-10 19:07:16 +00:00
ae0f1d45d8
Allow for dynamic allocation of interrupt vectors.
...
COMPAT_RENO removed.
Handle memory errors.
uap->sigcntxp -> SCARG(uap, sigcntxp)
1995-11-10 19:05:46 +00:00
33bd27fa3c
Major rewriting of pmap_bootstrap; CPU dependent allocations moved
...
to related file.
1995-11-10 18:52:54 +00:00
3095b6514c
No need anymore.
1995-11-03 14:34:52 +00:00
46e32a9703
No need for this file anymore; it's defines moved to other places.
1995-11-03 14:29:23 +00:00
ragge