972c941cf6
Fix typo in comment reported by Tetsuya Isaki in kern/11587.
2000-11-29 12:49:56 +00:00
435b4c7b35
Fix c896 support. If the first mem bar is 64bit, then the second one will
...
be too. And offset for the 2nd being after the 1st by a 64-bit bar, not
32-bit.
2000-11-29 02:00:38 +00:00
454f740bd4
Use AC97_REG_* constants rather than defining them ourselves.
2000-11-28 16:57:16 +00:00
997701c6c1
Define additional AC'97 registers.
2000-11-28 16:54:17 +00:00
92f11ef3d3
BUG FIX: change enable sequence for 16-bit pcmcia cards. This change
...
provides better (not perfect) reset sequence. The most significant
change is asserting output enable reg before power up. Stop routing
interrupt during reset.
2000-11-28 09:11:36 +00:00
443bd6369f
Device driver for the built-in audio on Intel ICH, ICH0, ICH2,
...
and i440MX chipsets. Based on a driver by Michael Shalayeff,
modified somewhat by me to use bus_dma properly, and fix some
audio encoding emulation bugs.
Thanks to Manuel Bouyer for testing and feedback.
2000-11-28 05:12:29 +00:00
1aa6c9fb10
Add prep support. change all __foo__ to foo. We don't __foo__ in the kernel
2000-11-27 21:51:02 +00:00
02aaf95f67
BUG FIX: pccbb turns off PC Cards' power on the bus in shutdown hook.
...
Some machines cannot reboot without this fix.
2000-11-27 09:04:32 +00:00
aeda8d3b77
Initial integration of the Unified Buffer Cache project.
2000-11-27 08:39:39 +00:00
25491e6a22
Power management (well, suspend/resume) is now implemented. Remove
...
it from the TODO list.
2000-11-27 02:37:14 +00:00
248928c7cf
Add a powerhook to reload AC97 registers after a resume.
...
Sound now works after suspend/resume on my Sony PCG-Z505S
2000-11-27 01:56:53 +00:00
7ec52ba411
Improve a debug message.
2000-11-26 21:05:02 +00:00
88bf6139e5
Regen.
2000-11-26 21:04:43 +00:00
63dfc5b570
Add an Intel camera (rfom OpenBSD).
2000-11-26 21:04:20 +00:00
04a83acaf7
lsu -> ld
2000-11-26 19:24:24 +00:00
57ea462da2
lsu -> ld, by popular request.
2000-11-26 17:44:02 +00:00
ee170a5528
Avoid a possible stall.
2000-11-26 16:16:04 +00:00
3c9d9276dc
Add new powerhook argument values, PWR_SOFTSUSPEND, PWR_SOFTSTANDBY and
...
PWR_SOFTRESUME. Apm calls powerhook with the values in normal interrupt
priority level while others are protected with splhigh().
2000-11-26 11:08:57 +00:00
d76cf8b502
Add multiple include detection - all userland installed headers are now
...
safe.
2000-11-26 06:03:24 +00:00
12269bd46c
Don't try to use ultra-dma on sis chips with revision 0xd0. It loses
...
immediately with a lost interrupt on udma mode 2, downgrades to mode 1
at which point it silently corrupts data on high disk activity. This
happens on two out of 3 machines I own that exhibit high disk activity.
2000-11-26 04:59:18 +00:00
2e93099aff
Replace sfb_copycols() which can run better job in some degree.
...
It still fails on certain conditions, thus is left commented out.
copycols() is done by a generic routine which works correctly.
2000-11-25 11:43:42 +00:00
1e1862bc57
Add another font from 4.4BSD-Lite2/luna68k.
2000-11-24 15:47:15 +00:00
b974ee7790
Add TC option card descriptions, which are commented out before NetBSD/pmax
...
yields local implementations to them.
2000-11-24 05:02:26 +00:00
fa19fe52db
adjust the spinlock macros in the non-MULTIPROCESSOR, non-LOCKDEBUG case
...
so that gcc will think that static spinlock are used.
this allows us to remove the ugly conditionalization of
static spinlock declarations.
2000-11-24 03:59:07 +00:00
f6b62f776c
avoid division and remainder operations for devices where
...
the sector size is DEV_BSIZE (ie. practically everything).
2000-11-24 00:17:35 +00:00
0661e6718b
- fix an error in uninitialized variable reference.
...
- add a missing function argument declaration.
- minor comment adjustments.
2000-11-22 06:59:08 +00:00
efadefb53f
In uhci_intr(), only warn about power state confusion if the
...
interrupt was actually for us.
2000-11-22 05:50:59 +00:00
a622a1b6d2
Remove obsolete comment.
2000-11-22 00:32:24 +00:00
690b28f91e
Add a couple of fonts used on Sony NEWS.
...
Generated from (recently removed) sys/arch/newsmips/dev/fnt{,24}.c.
2000-11-21 11:44:45 +00:00
ce10334de9
Fix errors in color lookup table initialization. Glyph is rendered
...
in visible color now.
2000-11-21 07:42:02 +00:00
290a66c213
Reduce probe noise.
2000-11-21 05:23:37 +00:00
1a5d87c9fa
Regen.
2000-11-21 00:25:43 +00:00
219abdb871
Typo.
2000-11-21 00:25:35 +00:00
6faa85c6d3
Note 3Com card support.
2000-11-21 00:25:20 +00:00
6f8985cf15
Regen.
2000-11-21 00:25:04 +00:00
7736bcc821
Add Prolific printer adapter.
2000-11-21 00:24:12 +00:00
e38c89a886
s/iRDA/IrDA/
2000-11-21 00:20:30 +00:00
1964a728da
add moxa
2000-11-20 19:27:16 +00:00
c27af44fc0
Add an attachment for MOXA 168P isa multiport card. This code was
...
written by Christoph Badura.
This was reported to work by user of this code. It's not tested
by me, but it's probably more useful in tree anyway.
2000-11-20 19:24:39 +00:00
2819c7b688
Use DMA from mbuf instead of copy in transmit.
...
Still use memcpy in receiving because we must use buffer fill mode
and many packets may share single receive buffer.
XXX: Workaround(?) for CXD3222: it fails to DMA for selfid packet according
to code placement. I'm not sure about the reason (cache? timing? bug?).
Fixed the bug: transmitter sometimes stop and OACTIVE bit of if_fw
never be cleared.
Fixed the bug: freeing free buffer.
Enable ieee1394_drain and ieee1394_watchdog for loss of fragment.
2000-11-20 12:12:18 +00:00
c62d17a551
rationalize the use of b_flags for geteblk() buffers.
...
rather than assigning to the whole field, set or clear individual flags,
which implies that the B_BUSY and B_INVAL flags will remain set.
this allows us to make the assertion in brelse() that B_BUSY is set,
which is the purpose of all this.
2000-11-20 08:24:08 +00:00
4e1e677996
regen.
...
CXD32222 -> CXD3222 (Sony OHCI Controller)
2000-11-20 06:23:13 +00:00
e51b1f604e
CXD32222 -> CXD3222 (Sony OHCI Controller)
2000-11-20 06:22:13 +00:00
d81861796a
Add support for Intel ICH2
2000-11-19 15:32:24 +00:00
acc196c4a9
Initialize ring buffer pointers when the ring buffer is allocated.
...
(comsoft() can be invoked before comopen() on serial consoles; a character
received before the console is opened "for real" can result in a fatal trap
unless the ring buffer pointers are initialized early)
2000-11-18 15:46:23 +00:00
0aea00f57c
Regen.
2000-11-18 05:29:27 +00:00
cec0022eeb
Add some 3D Labs products, from XFree86, via groo@netbsd.org
2000-11-18 05:29:00 +00:00
1e533cd38c
Pull up FreeBSD changes:
...
1.39:
Have if_ti stop "hiding" the softc pointer in the buffer region. Rather,
use the available void * passed to the free routine and pass the softc
pointer through there.
1.33:
Add support for the Netgear GA620T copper gigabit card.
1.32:
Tweak probe message so that 1000baseSX and 1000baseT cards are
explicitly identified.
1.31:
Update the Tigon driver to support 1000baseTX gigE over copper AceNIC
cards. This basically involves switching to the 12.4.13 firmware, plus
a couple of minor tweaks to the driver.
NetBSD changes:
get rid of ti_inuse, the mbuf ref counting code should call ti_free() when
needed.
Use hardware 802.1q support.
2000-11-17 19:33:25 +00:00
54e36dbaa6
Update to firmware 12.4.13+wpaul, from FreeBSD
2000-11-17 19:23:35 +00:00
42681a6a9f
Supports ETHERCAP_VLAN_MTU. Tested on sbus hme on Ultra/1.
...
Thanks to Andrei Petrov for the hint !
2000-11-17 19:08:00 +00:00
4046a1bd78
if AC97_CODEC_DOES_VRA is not supported, only print warning than
...
hw Variable Rate Audio is not supported and continue attaching the driver.
This is I believe more correct than what was done in rev 1.5
2000-11-15 21:06:33 +00:00
ef36370776
Regen.
2000-11-15 14:36:50 +00:00
d57ee8b358
Add Sony memory stick.
2000-11-15 14:36:09 +00:00
503701f0d3
OF_nextprop: make OUT argument type `void *'
2000-11-15 14:27:26 +00:00
b84f740be0
Move bpfattach()/bpfdetach() calls into ether_ifattach()/ether_ifdetach().
2000-11-15 01:02:11 +00:00
c0122f4013
Add fwlynx PCI attachment
2000-11-14 23:40:44 +00:00
ffd7494144
Add openfirm
2000-11-14 23:37:58 +00:00
617742b256
Add a fwlynx device. Move the file for fwohci to files.ieee1394
2000-11-14 23:37:20 +00:00
1936d0565a
some cleanup. Add back OFIOCGETOPTNODE.
2000-11-14 21:10:05 +00:00
a790bc7690
Add OFIOCGETOPTNODE (now that I know how to implement it).
2000-11-14 21:07:26 +00:00
99fac6ed3e
need uvm/uvm_extern.h for PAGE_SIZE
2000-11-14 19:44:34 +00:00
cfe0892ed3
NBPG -> PAGE_SIZE
2000-11-14 18:42:55 +00:00
60f33f91c2
Pull in <uvm/uvm_extern.h>
2000-11-14 18:35:10 +00:00
275539f03c
NBPG -> PAGE_SIZE
2000-11-14 18:21:00 +00:00
34a57dc139
Regen.
2000-11-14 16:20:55 +00:00
41e8f20175
Add Alteon and netgear 1000baseT variants of the gigabit ethernet adapter.
...
From FreeBSD
2000-11-14 16:20:20 +00:00
1ae6bcbbf0
Acerscan 320U doesn't do strings right. From FreeBSD.
2000-11-14 15:33:04 +00:00
ab324086df
Set the open flag when opening the scanner.
2000-11-14 13:57:16 +00:00
f1c77e81db
Add support for link fragmentation and reassemble for IEEE-1394.
...
XXX: drain is still not yet implemented, thus memory leak will occur
in case of any of fragment lost.
2000-11-14 11:14:55 +00:00
fbf62501af
Mark the "TOSHIBA, XM-4101TASUNSLCD" CD-R for a-sync operation only.
2000-11-14 08:52:35 +00:00
7d085e8e51
Add openfirmio which is an ioctl interface to OpenFirmware.
2000-11-14 06:45:54 +00:00
3b275bc230
Add OF_nextprop and OF_setprop prototypes.
2000-11-14 06:44:12 +00:00
1365092255
de __P'd.
2000-11-14 06:42:27 +00:00
4c54ce2034
Define ncr53c9x_ioctl() and use it to start sync negotiation.
2000-11-13 15:24:22 +00:00
089961e7c5
- use jumbo rx if mtu is too big to fit in one mbuf, not when larger than
...
ETHERMTU.
- add support for ETHERCAP_VLAN_MTU.
2000-11-12 18:32:43 +00:00
ad9bda9339
Change `nvram size' data type to `bus_size_t'.
2000-11-11 11:59:42 +00:00
035ceca5b2
Add note about time-of-day and interval timer programming on this chip
...
are combined into the same (write-only!) control register.
2000-11-11 11:18:07 +00:00
526def8fd1
Add a function to retrieve the size of the on-chip NVRAM area.
2000-11-11 11:03:31 +00:00
6836c0bd28
Update frlengths after a isoc transfer.
...
Suggested by Yuri <yuri@tsoft.com>
2000-11-10 14:11:49 +00:00
1bfab105b0
Don't try to set CM_OVER_DATA feature if features cannot be set.
...
From Ryutaroh MATSUMOTO <ryutaroh@ss.titech.ac.jp> in PR # 11428.
2000-11-10 14:08:32 +00:00
0510b1739c
Update documentation link. From OpenBSD.
2000-11-10 13:53:23 +00:00
9a10107274
Some OpenBSD defines. From aaron@monkey.org
2000-11-10 13:52:28 +00:00
da071ce468
Remove lonely splx in fw_detach.
2000-11-10 03:45:09 +00:00
a7398324e3
Regen for ELSA WaveLan IDs
2000-11-10 01:03:29 +00:00
e00d559554
Add ELSA WaveLAN card & a noname clone(?)
2000-11-10 01:02:32 +00:00
c8c52e320a
Match controllers hiding behind a Symbios 53c1510; thanks to Jonathan Lemon
...
<jlemon@flugsvamp.com> for providing clarification.
2000-11-09 18:19:40 +00:00
611c77c7df
unused variable
2000-11-09 17:20:24 +00:00
01dc7ef4f3
TODO
2000-11-09 15:04:55 +00:00
0129c52c7d
- A few minor changes (typos and the like).
...
- Use SPLs in iop_msg_send() and not the interrupt mask - it accesses
shared resources lower down.
2000-11-09 12:51:36 +00:00
9a41c41bed
Install only headers that are useful to userspace (ioctl interface is not
...
finished, but will be here soon).
2000-11-09 12:34:05 +00:00
71b0c155a0
Support for MI console magic framework.
2000-11-08 23:41:42 +00:00
faa5920bd2
Use the MI console magic sequence framework.
2000-11-08 23:13:03 +00:00
45b672fb47
Add iop, iopsp.
2000-11-08 19:56:20 +00:00
5854b30016
Add glue for iop.
2000-11-08 19:46:27 +00:00
3785a081f1
Recurse into i2o/.
2000-11-08 19:45:49 +00:00
d49fd13524
Add support for I2O adapters and SCSI/FC-AL/BSA class devices. This needs
...
more testing with different configurations, and work in a number of areas
(which I'm not able to do for a little while), but is at least functional
and stable on i386 with DPT adapters.
2000-11-08 19:45:30 +00:00
918971bc20
Initial import of some of the definitions for the Serial Bus Protocol V2.
...
Which is used for SCSI over IEEE1394.
2000-11-08 19:27:08 +00:00
891c4efd74
- Pull in some updates from FreeBSD - mainly clarifications. Thanks to
...
Mike Smith <msmith@freebsd.org> for pointing these out.
- Ensure that we get AENs: reserve one CCB/command block for parameter
retrieval, and chain AEN retrievals that are the result of an interrupt.
2000-11-08 19:23:50 +00:00
142ab5b1ec
Move lsu stuff to more logical locations, and push queueing into the lsu
...
driver.
2000-11-08 19:20:33 +00:00
d0c3ebd9d8
Make the test for dmareg >= 0x10000 quirked on IDE_16BIT_IOSPACE
2000-11-08 18:22:27 +00:00
88cbfbe36d
Move guts of pciide_print_modes() to wdc_print_modes() so that non-pciide
...
wdc drivers (like macppc's obio IDE interface) can use it. Also add
support to both wd attach line and to wdc_print_modes() to print
Ultra/{33,66,100} for respective UDMA modes (From Manuel Bouyer).
2000-11-08 17:57:36 +00:00
d764c4d540
One more fix to multicast hash computation. Submitter confirms that
...
with this fix, multicast does indeed work properly on the EPIC.
From Zdenek Salvet <salvet@ics.muni.cz>.
2000-11-08 15:20:29 +00:00
5b19fc8512
Add powerhook and shutdownhook to support Notebook.
...
Use PAGE_SIZE instead of OHCI_PAGE_SIZE for each DMA mem.
OHCI_PAGE_SIZE(2kB) will be round up PAGE_SIZE, anyway.
XXX: need more sophisticated way to manage buffer.
Clear IntEvent first not to lose SelfIDCompleted in multiple bus reset.
Be careful not to clear BusReset int event in SelfID duration to follow
the OHCI spec.
Initiate BusReset if selfid is not completed within 3sec after busreset.
2000-11-08 06:00:18 +00:00
d522d7acc9
Add fwlynx & fwnode.
2000-11-07 18:45:46 +00:00
b666be4488
Add more names:
...
MI: hifn, intersil7170, neo, siop_common, sysmon_envsys, sysmon_wdog
i386: mca
newsmips: dmac, spifi, xafb
2000-11-07 15:33:53 +00:00
232e2c5ef9
Regen.
2000-11-07 13:53:59 +00:00
0dc9fd53b9
Just print 'Intel' for their other OUI.
2000-11-07 13:53:42 +00:00
5a356af882
Regen.
2000-11-06 22:32:49 +00:00
75367f830a
Add some OUIs and models. From OpenBSD.
2000-11-06 22:32:26 +00:00
5d7a16ff8c
make it compilable with FW_DEBUG
2000-11-05 23:04:00 +00:00
b6b3ee8657
remove what looks to be a bit of leftover debug code.
2000-11-05 23:00:10 +00:00
1c76b8d14d
fix types in debug code.
2000-11-05 22:59:27 +00:00
f0bd09f42d
Merge in my some of my stuff.
2000-11-05 22:35:56 +00:00
43ff857e29
Don't allow use of mapreg is they are at or above 0x10000 in I/O space. (in
...
other words, if the address uses bits in the top 16 bits, don't use it).
2000-11-05 21:14:59 +00:00
d458239a94
When doing the cacheflush for MIPS1, adjust the length to account for
...
an unaligned buffer. The last word of the buffer was not getting flushed
if the buffer was unaligned and fit in a single DMA segment. Now dump(8)
works on both MIPS1 and MIPS3 DECstations.
2000-11-05 21:02:13 +00:00
0f1770e08d
make compilable without FW_DEBUG
2000-11-05 19:43:32 +00:00
e83458422f
First Prototype implementation of network interface part for IEEE1394 (if_fw).
...
Current status:
Only OHCI chip is supported (fwohci).
ping (IPv4) works with Sony's implementation (SmartConnect) on Win98.
sometimes works but not stable.
Not implemented yet:
IRM (Isochronous Resource Manager) functionality.
Link layer fragmentation.
Topology map.
More to do:
clean ups
MCAP
charactor device part
dhcp
There is no entry in GENERIC config file yet.
Follow sys/dev/ieee1394/IMPLEMENTATION to enable if_fw.
2000-11-05 17:17:12 +00:00
1363813e0d
Two things off the TODO list.
2000-11-05 16:44:08 +00:00
cde4f7415c
Add mmap support (i386-specific for the moment).
2000-11-05 16:24:45 +00:00
5a8a59d459
Weed out the Dell and HP versions which are known to work in
...
WSS emulation mode (i.e. won't work in AC'97 mode).
2000-11-05 16:13:17 +00:00
70b3814a53
Add NeoMagic 256 audio.
2000-11-05 06:46:03 +00:00
f945fc008d
Driver for NeoMagic 256 audio. Based on the OpenBSD driver, which is
...
in turn based on the FreeBSD driver, ported to NetBSD and somewhat
modified by me. Thanks to Matt Thomas for testing.
2000-11-05 06:43:45 +00:00
aac73109ae
Feh, fix st00p1d braino in last.
2000-11-05 05:41:25 +00:00
fce3c3a6a8
pcweasel carries the sysmon_wdog attribute.
2000-11-05 04:07:30 +00:00
8e0eb1dc12
viaenv carries the sysmon_envsys attribute.
2000-11-05 04:06:53 +00:00
e67f5e66bc
Split the envsys and watchdog parts of sysmon into their own
...
files.
2000-11-05 04:06:13 +00:00
3b5fce6c46
Invert the sense of i82586_init()'s return value so that
...
it matches what ether_ioctl() expects.
2000-11-04 19:48:38 +00:00
95b9ab0ebc
Add a device driver for the Middle Digital, Inc. PC-Weasel serial
...
console board. This glues into the `pcdisplay' driver and provides
support for the watchdog timer function on the PC-Weasel.
2000-11-04 18:47:20 +00:00
7575e3d5e9
Update comment regarding watchdog timer toggle.
2000-11-04 18:44:28 +00:00
c48d521bdb
Add a watchog timer framework to the system monitor.
2000-11-04 18:37:19 +00:00
232ac6b3d1
Print the vendor and chip id in the DPRINTF with 0x%x and not just %d.
2000-11-04 18:28:19 +00:00
f3c38af11b
Regen.
2000-11-04 16:43:14 +00:00
601bcf9813
Add a couple NeoMagic products. From OpenBSD.
2000-11-04 16:41:57 +00:00
f3030960da
Add quirks for a Fuji camera.
2000-11-04 15:54:36 +00:00
05d5f37522
Shadow the AC'97 codec registers. This adds two capabilities:
...
* support devices that crash when reading the codec registers; a flags
interface is added to the host interface and one flag is defined
(AC97_HOST_DONT_READ).
* new API (restore_ports) for restoring the user's settings. This
can be useful after an APM resume after a suspend to disk.
From OpenBSD.
2000-11-04 08:07:14 +00:00
0bb6525f5b
Add some more codec IDs. From OpenBSD.
2000-11-04 05:45:57 +00:00
96d994ecae
regen.
2000-11-03 16:31:51 +00:00
10885fbd47
Oops
2000-11-03 16:31:01 +00:00
62d4f894dc
Regen.
2000-11-03 15:57:33 +00:00
3789452cb3
Pequr Technology is now called ServerWorks.
2000-11-03 15:54:02 +00:00
8ba559d056
st_touch_tape(): Pass XS_CTL_SILENT to st_mode_select().
2000-11-03 12:08:41 +00:00
4c7351ec7d
* st_touch_tape(): start probing at the block size from the sense data if
...
we have it.
* st_unmount(): reset density to the device default. This prevents using
stale density values after changing to a medium with different density.
Section 9.3.3 of the SCSI specs states that a device shall return the
density value specified in the last succesfull MODE SELECT after an
unload operation, in case it is not able to automatically determine
the density of the new medium.
2000-11-03 10:46:18 +00:00
e3aaa6c1ab
* Per st(4), retrieving status and setting modes on the control device
...
should succeed even if no media is loaded.
* In stopen(), check the return value of st_mount_tape().
2000-11-03 10:22:02 +00:00
d3ca42abf0
Add support for Socket Comm. PC Card Ethernet, and tidy up naming.
2000-11-03 09:07:24 +00:00
39355e9743
Make this compilie with LANCE_REVC_BUG.
2000-11-03 06:21:32 +00:00
d952450835
Wrap function declaration with "#ifndef sun3/#endif"
...
because sun3 does not have bus_space(9) support and
it have not switched to MI intersil7170 driver.
XXX We should split this into intersil7170{reg,var}.h ?
2000-11-03 05:23:07 +00:00
9702e75aa1
Sync with FreeBSD: Add a scanner. Fix a pasto.
2000-11-03 04:00:15 +00:00
930c4cf062
First attempt at multicast stuff. I suspect it doesn't work.
...
Use ether_ioctl -- saves 300 bytes of text.
2000-11-03 00:25:36 +00:00
42e564ed45
Remove unnecessary includes.
...
Add a compiled-in RCSID.
2000-11-02 21:56:46 +00:00
13234acd0f
Convert to using ether_ioctl().
...
G/C huge swathes of unused code and outdated comments.
2000-11-02 21:42:41 +00:00
f5f7066fc8
When a read DMA transfer is interrupted by a disconnect on the IOASIC SCSI
...
and the buffer is not 8-byte aligned, it leaves a partial transfer in the
SDRx registers. This could cause data corruption in dump(8) because the
read-ahead buffers are allocated on a non-aligned address. When the read
DMA transfer is interrupted and the current DMA position is not aligned,
call the dma_end() routine to flush the SDRx register contents to the
buffer.
2000-11-02 21:00:04 +00:00
b2429742a5
Print out product info on attach.
2000-11-02 18:55:46 +00:00
f71476a62f
Introduce ST_Q_ERASE_NOIMM, a quirk indicating that the device rejects
...
an ERASE command with the `Immed' bit on.
Use it on the VIPER 21247 & 21531.
2000-11-02 13:34:59 +00:00
e4958f1fe6
Prevent printing sense information twice.
2000-11-02 13:12:58 +00:00
5bf3b4ba22
regen
2000-11-02 07:16:16 +00:00
24429db457
add support:
...
MELCO LPC2-TX
Telecom Device TCD-HPC100
MACNICA ME1-JEIDA
2000-11-02 07:15:43 +00:00
41cfcbebb0
Fix two bugs.
...
- Doesn't fail ne_pcmcia_attach() if ne_pcmcia_ax88190_set_iobase() failed.
- Check whether LIOBASE register is writable or not (dirty hack!).
Fix PR. 11285
2000-11-02 07:04:46 +00:00
9c058471c3
Remove useless check for SDEV_MEDIA_LOADED from st_read_block_limits().
...
This command should work whether or not media is present in the device.
2000-11-02 00:56:59 +00:00
3867a66a9a
* In st_touch_tape(), don't bail out if the MODE SELECT fails since we are,
...
after all, probing the device for acceptable parameters.
* In st_loadquirks(), copy mode-specific quirks from the quirk table
to `st_softc'; otherwise all such quirks save ST_Q_FORCE_BLKSIZE are ignored.
2000-11-02 00:52:15 +00:00
507aaec04c
Adapt to the new line discipline scheme.
2000-11-02 00:01:44 +00:00
9350b8913d
Adapt to new line discipline scheme.
2000-11-01 23:57:14 +00:00
2a860a3de9
Adapt to the new line discipline scheme.
2000-11-01 23:54:57 +00:00
55fd5a2fb0
Pass along the bus frequency too, for devices that need it.
2000-11-01 06:18:45 +00:00
34ed153955
Fix warning in a debug printf.
2000-11-01 06:17:32 +00:00
f5ba0a3942
fb_is_console(): we must match on the `fb' propery in a V0 PROMs root node
...
only after establishing that the PROM output device is a frame buffer device.
2000-10-31 21:54:35 +00:00
97e5badeae
Line up columns in #define list.
2000-10-31 15:16:26 +00:00
f9a51c7b15
Clean up a #define that doesn't belong. Oops. That's what I get for
...
working this late.
2000-10-31 08:06:14 +00:00
37486bb837
Get the bpp driver to work properly.
2000-10-31 06:32:06 +00:00
a7fcd8b686
Fix hanging token ring when data size is multiple of 514, using
...
patch in PR/11316 by YAMAMOTO Takashi.
This fixes random hangs I experienced, and probably also
remedies PR/11300 and PR/9321.
2000-10-31 01:22:08 +00:00
55b8e84db5
Delete more files before import.
2000-10-28 14:51:08 +00:00
d91eb6a0c3
Replace remaining vm_offset_t's in NetBSD code by vaddr_t; remove now
...
unnecessary casts added by thorpej in 1.11 of bktr_core.c. Strike one
from the TODO list.
2000-10-28 14:50:27 +00:00
134608261c
Merge 2.17 changes to trunk.
2000-10-28 14:31:57 +00:00
9732164f76
Import release 2.17 of the bktr driver.
...
Changes: Integration of some NetBSD changes. (FreeBSD version now is also
usable as a KLD (~= LKM).)
2000-10-28 14:17:40 +00:00
d214b09b47
Increase initial Tx drain threshold to 512 bytes.
...
My macppc complains about transmit FIFO underrun every time.
2000-10-28 08:36:57 +00:00
4295299769
Regen.
2000-10-27 22:43:44 +00:00
86342bb610
Add a bunch of Intel PCI chipsets. From OpenBSD.
2000-10-27 22:43:28 +00:00
1b15310aaa
Regen.
2000-10-27 17:37:02 +00:00
24cba36ced
Add a bunch of Pequr (ServerWorks) products. From OpenBSD.
2000-10-27 17:36:44 +00:00
8a54846748
Fix errors in initializing the software copy of 256 entry colormap
...
stored in device softc. rasops_cmap[] array is orginazed in 256
iteration of 3 byte long RBG triplet, which does not match with
struct wsdisplay_cmap design.
2000-10-27 07:24:04 +00:00
528e314143
Work around a fatal firmware bug on some boards. From msmith@freebsd.org.
2000-10-26 14:43:50 +00:00
a4df364077
METHOD CHANGE: Use CIS_FUNCE data which is decoded by pcmcia_cis.c,
...
instead of decode cis tuple by itself. This change leads to suppress
one power-cycling.
2000-10-25 09:32:11 +00:00
b44679b7ec
Bugfix: reset 16-bit pcmcia in chip initialisation sequence.
2000-10-25 09:15:58 +00:00
a675063a0d
Add a hack to try and figure out if the TI UTUSB41 hub is bus powered
...
despite claiming to be self powered (it's important to know so that the
power budget can be met).
2000-10-24 15:01:26 +00:00
372ae0a636
The all time favourite hub, TI UTUSB41, doesn't report power right. :(
2000-10-24 14:57:35 +00:00
5cc8d65338
Adda quirk for hubs that do not report bus powered status in a normal way.
2000-10-24 14:56:09 +00:00
94e36acb29
Tell usbd_set_config_no() to be verbose. It's nice to know whyit fails.
2000-10-24 14:53:59 +00:00
71fc3f6ee2
Regen.
2000-10-24 14:51:51 +00:00
963138bceb
Add Apple's cool new mouse.
2000-10-24 14:51:24 +00:00
7817cc2ba7
another Ricochet quirk, this time a well-known one. No device strings are provided from it.
2000-10-24 03:59:16 +00:00
fc92601259
Fixes related to QUEUE FULL status:
...
- move status handling in siop_scsicmd_end(), it's better than in siop_intr()
- define 2 internal SIOP status, for "no status reported by device" and
reset condition
- add a list of "urgent" command, to be executed before the list of command
queued the normal way; this is used for command which got aborted
by a QUEUE FULL and have to be requeued in order.
- Don't accept to send a Q_TAG message not immediatly folowing a IDENTIFY
2000-10-23 23:18:10 +00:00
cce4838c1f
Add ram size to struct properties, and pass it to the bus independant part.
2000-10-23 14:57:23 +00:00
7777f61cbe
Rearrange for script changes (scheduler core in main script, command part
...
of the scheduler in command table).
Add tagged command queuing support.
2000-10-23 14:56:16 +00:00
5113af09e3
Regen
2000-10-23 14:54:50 +00:00
7ae5c097e5
Rearrange things a bit to have less jumps
...
Install the core of the scheduler in main script (so it's in RAM when there is
one), and avoid jump in the common case. The command part of the scheduler now
lives in host memory, with tables.
Add template for a tag switch.
2000-10-23 14:53:53 +00:00
3b7321e1c0
Allow conditionnal branch like "JUMP foo, IF FALSE"
...
The branch will never be taken as is, but the driver can patch the script.
2000-10-23 14:51:51 +00:00
96562d2d4f
Add missing splx() call.
2000-10-23 11:27:52 +00:00
644aa13a51
Fixed the value of TULIPF_DBO; which was accidentaly shared with the same
...
value of TULIPF_BLE. Pointed out by Enami-san.
2000-10-23 04:05:21 +00:00
365f7337ea
make ucom into a random source, type TTY
2000-10-22 19:01:44 +00:00
eb27dda01d
Add a new quirk: ASSUME_CM_OVER_DATA.
...
Set this on the Metricom Ricochet GS USB modem.
This particular modem breaks if the USB command to enable the feature
CM_OVER_DATA. Since it appears to wake up in that mode already,
just pretend it is already on, and don't try to set it.
Since this commit is happening over my Ricochet modem, I assume it works
now.
2000-10-22 08:20:09 +00:00
0a481d850d
fix SBus bursting *correctly* this time
2000-10-22 03:04:50 +00:00
wiz