pass. Rather than providing a whole slew of cache operations that
aren't ever used, distill them down to some useful primitives:
icache_sync_all Synchronize I-cache
icache_sync_range Synchronize I-cache range
dcache_wbinv_all Write-back and Invalidate D-cache
dcache_wbinv_range Write-back and Invalidate D-cache range
dcache_inv_range Invalidate D-cache range
dcache_wb_range Write-back D-cache range
idcache_wbinv_all Write-back and Invalidate D-cache,
Invalidate I-cache
idcache_wbinv_range Write-back and Invalidate D-cache,
Invalidate I-cache range
Note: This does not yet include an overhaul of the actual asm files
that implement the primitives. Instead, we've provided a safe default
for each CPU type, and the individual CPU types can now be optimized
one at a time.
A7000 kernels are obsolete now the ARM7500 detection is integrated. The
NC's however are not completely supported and should in the near future be
bootable with GENERIC/INSTALL too.
While we're here, enable RAIDframe (and RAID_AUTOCONFIG) by default for
architectures that I'm comfortable can deal with it being on by default.
Also: bump the number of 'raid' devices from 4 to 8, since 4 seems to
be insufficient in practise.
* Use a common set of exception handlers for all arm32 platforms.
* New FIQ framework based on discussions with Ben Harris, shared
between arm26 and arm32.
Any problems reported by testers have been fixed, and massive
cross-compiling of kernels has shown that any problems that remain
with actually building kernels are not related to this.
not support a value (e.g., it's to be used as "options FOO" instead of
"options FOO=xxx"). options that take a value were converted to
defparam recently.
- minor whitespace & formatting cleanups
<arm/arm32/vmparam.h> (mostly the stuff that's tied to the pmap
implementation).
- Since the MMU definitions in pte.h are specific to ARM processors
that support 32-bit mode, move pte.h to <arm/arm32/pte.h>.
- Make the Netwinder startup file build again (use PT_B|PT_C, rather
than PT_CACHEABLE, since the latter expands to a variable these days).
model in use for a given platform (__PROG26 vs __PROG32), then pulls
in <arm/types.h>. Change each ARM port to pull in <arm/arm26/types.h>
or <arm/arm32/types.h> as appropriate. Change all references to PROG26
and PROG32 to __PROG26 and __PROG32. Eliminate the opt_progmode.h
header file.
On platforms which load the kernel sans symbols directly from firmware
(possibly in e.g. S-Record format), call ddb_init() with empty arguments,
so that it will search any compiled in SYMTAB_SPACE. On all other platforms,
if __ELF__, also call ddb_init() with empty arguments until ELF bootloaders
which pass symbol information are ready.
the etc Makefile override that by putting USETOOLS into $.MAKEOVERRIDES
This way the default for kernel compiles is still to use the installed
toolchain instead of depending on $TOOLDIR. $TOOLDIR can be used by
simply adding USETOOLS=yes to the command line as usual.
Adjust each ports template to set the default no setting and also pull in
bsd.own.mk if they weren't already to ensure they'll build correctly
with the new toolchain setup.
but lacks the podulebus completely; this might be a good starting point for
small memory machines.
Most stuff is disabled but commenting it for easy adding.
The IOMD/VIDC combination is now moved to arch/arm/iomd together. These
files still need a lot of cleaning up :( .... esp. the RC7500 support that
is still dormant in it; this needs either to be removed or split out for
RC7500's ``VIDC'' video/audio variant.
Apart from the RC7500 support wich is still in arch/arm32 the
iomd,vidc,riscpc and podulebus subdirectories of arch/arm32 can be removed.
This split still uses some small parts of arch/arm32 .... those are the MI
parts that haven't been moved yet.
RiscPC/A7000 have been tested and confirmed to build as should NC.
reinoud