Commit Graph

65341 Commits

Author SHA1 Message Date
fvdl
580b06b52e s/portmap/rpcbind/ 2000-06-02 23:23:27 +00:00
fvdl
5531feb1a7 USe new RPC interface. 2000-06-02 23:20:49 +00:00
fvdl
ed2c47f74f Adapt for new RPC interface. 2000-06-02 23:20:18 +00:00
fvdl
b992cb1db9 Update rpcinfo to handle rpcbind version 3 and 4. Taken from Sun TI-RPC
distribution.
2000-06-02 23:19:38 +00:00
fvdl
03359a9af1 Add netconfig(4) and rpc(4) manual pages. 2000-06-02 23:18:31 +00:00
fvdl
2db4d2fdfe Modify to support RPC over IPv6. 2000-06-02 23:17:55 +00:00
fvdl
6b395c99f1 portmap(8) has been replaced by rpcbind(8). 2000-06-02 23:16:39 +00:00
fvdl
d687de29c6 rpcbind, the successor to portmap. Taken from Sun TI-RPC source code,
then modified. This still contains some ugly special casing for
procedures in the security section, but I haven't found a nicer way
so far.
2000-06-02 23:15:41 +00:00
fvdl
7df0ccbadc Add new RPC code, based on Sun's TI-RPC code. Adapted to not use XTI,
but sockets instead, internally. Old, backward compatible interfaces
maintained.
2000-06-02 23:11:05 +00:00
fvdl
5454a2b803 Fix omission in previous. 2000-06-02 23:01:57 +00:00
fvdl
c257a3b3ea New headers for the new RPC code (based on TI-RPC from Sun). 2000-06-02 22:57:54 +00:00
eeh
03228642f7 Use all 64 address bits in ld*a()/st*a() macros so physical device addresses
work.  (Also add some bus_space_*() debug hooks).
2000-06-02 22:56:32 +00:00
fvdl
02cd59a751 * Portmap is now called rpcbind.
* Add IPv6 RPC entries to inetd.conf (commented out by default, as the others)
* Add netconfig file, needed for TI-RPC code.
2000-06-02 22:54:08 +00:00
jdolecek
2a05365bbb _rtld_unref_dag(): needed->obj might be null if the unreffed object has
some unsatisfied references (most often when compiled without necessary
	-Wl,-R), so check for that instead of causing null-dereference;
	this way the code has a chance to cleanup after itself and report
	the error to caller

Thanks to Jason Thorpe for helping fix this!
2000-06-02 22:52:28 +00:00
thorpej
97b236dc90 Make this compile again. 2000-06-02 22:22:55 +00:00
matt
baaa1154d5 no need to raise ipl since the definition of softintr_schedule is that
it's from at or above softipl.
2000-06-02 22:14:10 +00:00
matt
479163743d Note that softintr_schedule can safely be called multiple times
before the callback is invoked.
2000-06-02 22:12:11 +00:00
cgd
0b270a9dfb booted_partition, not booted_parition... 2000-06-02 22:09:02 +00:00
thorpej
2d11440f4d Back out previous change. It causes all sorts of problems. The
memory leakage stuff should be addressed, but this change was
obviously wrong.
2000-06-02 22:09:01 +00:00
matt
34a96c661b replace spl4 with splconsmedia 2000-06-02 21:51:46 +00:00
matt
d278b1da45 Add IPL_* codes.
Add other codes for struct references.
Add softintr framework for IPL_SOFTNET and IPL_SOFTSERIAL.
General cleanup of .s files replacing hardcoded structure offsets with
symbolic ones.
2000-06-02 21:51:15 +00:00
matt
83a385c230 use splsoftddb() instead of hardcoding the ipl. 2000-06-02 21:49:06 +00:00
matt
b8cccfafd8 Move spl macros from <machine/param.h> to <machine/intr.h>
Fix botch on my part and make the IPL_* match reality on VAX.
Redefine spl macro using the symbolic IPL_ instead of being hardcoded.
Move schedsoftnet, schedsoftclock from <machine/cpu.h> to <machine/intr.h>
Add a _setsirr macro for schedsoft*.
Add softintr function and framework.
2000-06-02 21:47:02 +00:00
matt
fb6a3dfb64 Include offsets in vs_cpu register in comments. 2000-06-02 21:39:54 +00:00
hubertf
914468cda3 s/a // 2000-06-02 21:21:41 +00:00
mhitch
0e88f603fa Allow sii driver to be compiled with MI SCSI support. Now DS3100 users
can use MI SCSI!
2000-06-02 20:24:20 +00:00
mhitch
51ebf74f71 Add commented out entry for SII driver using MI SCSI.
Remove DS500-only comment for MI SCSI configuration include.
2000-06-02 20:23:13 +00:00
mhitch
ccb1131a2d SII driver goes MI SCSI: add a scsibus at xsii. 2000-06-02 20:22:00 +00:00
mhitch
ee0ecb0855 Coerce the SII driver into working with MI SCSI; convert scsipi_xfer info
into a ScsiCmd structure.
2000-06-02 20:20:29 +00:00
mhitch
44d42ae28b Add some glue so let the SII driver work with MI SCSI. 2000-06-02 20:16:51 +00:00
mhitch
61ec2107d7 Clear lun field in ScsiCmd (SII driver change to work with MI SCSI). 2000-06-02 20:15:40 +00:00
mhitch
8e72d1b6c4 Adjust to allow SII driver to work with MI SCSI. 2000-06-02 20:12:57 +00:00
tsutsui
f44619d89d KNF some lines. 2000-06-02 18:34:05 +00:00
thorpej
42e4f5279b Rearrange the code that loads pages into the VM system somewhat, and
use the ACPI memory map if provided by the boot program.
2000-06-02 18:33:16 +00:00
thorpej
90ef824c6d Actually define the ACPI memory map entry (bi_memmap_entry). 2000-06-02 18:27:47 +00:00
thorpej
7f1c64b910 Enable the code that passes the ACPI memory map to the kernel. 2000-06-02 18:26:10 +00:00
cgd
8d519faff4 fix type of sysctl_ntptime 'where' arg in defined(NTP) case 2000-06-02 18:22:44 +00:00
itojun
e0b65589f1 sync with more recent kame. cope with malloc failure more gracefully
some cosmetics.
2000-06-02 18:20:15 +00:00
christos
b619ddeed7 Don't leak memory. 2000-06-02 18:00:42 +00:00
thorpej
7a5ce477cb When allocating new PT pages during early bootstrap (i.e. before
pmap_init() has finished), make sure to zero them.
2000-06-02 17:46:37 +00:00
simonb
7e6435a651 White space nit in previous. 2000-06-02 16:05:49 +00:00
simonb
38cc1b3975 Add new sysctl node "KERN_SYSVIPC_INFO" with "KERN_SYSVIPC_MSG_INFO",
"KERN_SYSVIPC_SEM_INFO" and "KERN_SYSVIPC_SHM_INFO" to return the
info and data structures for the relevent SysV IPC types.  The return
structures use fixed-size types and should be compat32 safe.  All
user-visible changes are protected with
	#if !defined(_POSIX_C_SOURCE) && !defined(_XOPEN_SOURCE)

Make all variable declarations extern in msg.h, sem.h and shm.h and
add relevent variable declarations to sysv_*.c and remove unneeded
header files from those .c files.

Make compat14 SysV IPC conversion functions and sysctl_file() static.

Change the data pointer to "void *" in sysctl_clockrate(),
sysctl_ntptime(), sysctl_file() and sysctl_doeproc().
2000-06-02 15:53:03 +00:00
eeh
f2ab1eb70c db_stack_trace_cmd -> db_stack_trace_print 2000-06-02 15:38:32 +00:00
eeh
94084a33f8 New softintr interface. 2000-06-02 15:36:53 +00:00
explorer
6a07b80d26 make this compile with KERBEROS5 defined. Note: only one of KERBEROS or KERBEROS5 may be defined in this file... 2000-06-02 14:47:19 +00:00
lukem
fd194fea27 use strtol() (instead of atoi()) for sane error detection 2000-06-02 13:37:12 +00:00
itojun
74d0ceb979 correct memory leak due to t_getstr() and realloc(). the commit will
prevent "top -s 0" from chewing up memory.

TODO: realloc() audit, revisit recent termcap/curses changes
2000-06-02 13:13:07 +00:00
shin
5d883bf68e make it compile with 'options SOFTFLOAT'. 2000-06-02 12:57:22 +00:00
pk
51ff5f7cd1 Let uvm_map_extract() set the lower bound on the kernel address range
itself, in stead of having its callers do that.
2000-06-02 12:02:43 +00:00
pk
bf3a6b350b Shouldn't pass garbage to uvm_map_extract(). 2000-06-02 11:47:53 +00:00