8dedb90f13
The ISA chipset must persist; it's required after autoconfig time.
1998-06-08 23:49:05 +00:00
f5cd6a7736
Add debugging support to the bus_space macros. If BUS_SPACE_DEBUG (or DEBUG)
...
is defined, the bus_space macros will check to ensure that the bus address
and the target buffer (if applicable) are aligned properly for the size
of the type being used. If they are not, a message will be displayed on
the console.
Strict alignment is required by the Alpha architecture, and a trap will
occur of unaligned access is performed. These changes will aid debugging
of broken device drivers.
1998-06-08 03:42:19 +00:00
aedc717c00
Hopefully avoid breaking PCMCIA on alpha.
1998-06-07 19:11:29 +00:00
2e9939699d
Kernel configuration for my Multia, an example of how to configure a
...
Multia w/ PCMCIA support.
1998-06-07 00:45:35 +00:00
14df007174
Oops, don't forget to fill in *addrp.
1998-06-07 00:29:29 +00:00
0890af5ca8
Only disable an interrupt line after MAXSTRAYs if there is no handler
...
attached; we get stray interrupts on PCI devices sometimes, for some
unknown reason. (Similar problem exists on the 164SX, which also has
a Pyxis.)
1998-06-06 23:29:23 +00:00
331a7f56c1
Remove some debugging code no longer relevant now that we have DMA
...
window chaining.
1998-06-06 23:11:52 +00:00
eabad6b572
Implement bus_space_{alloc,free}() for swiz PCI I/O space.
1998-06-06 22:44:46 +00:00
7a6d646c9b
Implement bus_space_{alloc,free}() for BWX bus space.
1998-06-06 22:28:16 +00:00
fe17c44d6c
Add support for software powerdown of the Digital Personal Workstation.
1998-06-06 20:53:41 +00:00
04ba8480ae
Use REGVAL64() to frob the Pyxis interrupt mask register.
1998-06-06 20:42:36 +00:00
098dd211c7
Define a REGVAL64() for some Pyxis registers.
1998-06-06 20:40:14 +00:00
49aea111fb
If the platform specified a powerdown hook, and howto has RB_POWERDOWN,
...
call the hook. If the hook fails, print a warning, and just halt (RB_HALT
is implied by RB_POWERDOWN).
1998-06-06 20:39:04 +00:00
1733ad8dc5
Clean up a little, and add a `powerdown' hook in the platform structure.
1998-06-06 20:18:50 +00:00
d08070a693
Add a comment describing the locking needs of the alpha_sgmap.
1998-06-06 20:12:28 +00:00
85d08836f1
- Don't call *_dma_init() twice; there's no need to. Just do it in *attach().
...
- Display Pyxis revision properly.
1998-06-06 01:33:44 +00:00
c0fa3c6ac4
Don't call *_dma_init() twice; there's no need to. Just do it in *attach().
1998-06-06 01:33:23 +00:00
59d76407b4
Display information about which sgmap we're attempting to initialize
...
if we die in alpha_sgmap_init().
1998-06-06 01:31:46 +00:00
9331237596
Oops, turn off some debugging printfs.
1998-06-05 21:47:14 +00:00
bf8523f4e4
- Egads! There are Pyxis "Pass 1" chips that do not have the DMA bug!
...
Use the check recommended by the Digital Workstation engineers; look
for Miata 1 systems (i.e. with Intel SIO). From Andrew Gallatin.
- Update copyright (Pyxis and BWX).
1998-06-05 19:25:19 +00:00
f251e3372d
Don't attempt to map the PCI IDE interrupt at bus 0 device 11 on the
...
AlphaPC 164 and AlphaPC 164LX - these are wired to compatibility mode.
1998-06-05 19:15:41 +00:00
1aa688234e
Miata 1 has an Intel SIO at bus 0 device 7 and a CMD PCI IDE at bus 0
...
device 4. Miata 1.5 and Miata 2 have a Cypress at device 7 and PCI IDE
at functions 1 and 2 of the Cypress (like the PC164SX). These on-board
PCI IDE controllers are wired to compatibility mode, so don't bother
trying to map the interrupt.
1998-06-05 19:04:51 +00:00
a1c151d56b
Add system variation for Miata 1.5.
1998-06-05 18:18:37 +00:00
c072110af0
Actually, I did use a few of them on this file (I wasn't clear enough
...
in my mail to Ross, I guess...)
1998-06-05 17:42:53 +00:00
bb362059ac
On Pass 1 Pyxis, disable PCI Read Prefetching, and warn the user about
...
the DMA bug that exists on this Pyxis revision.
1998-06-05 17:24:11 +00:00
29977868a7
What was called CNFG in ALCOR and ALCOR2 is actually called PYXIS_CTRL1
...
in Pyxis. Add a comment to this fact.
1998-06-05 17:22:34 +00:00
73e5032ac9
Define the Pyxis-specific bits in the CIA_CSR_REV register (ID mask, and
...
the ID for the 21174).
1998-06-05 17:16:31 +00:00
2701ea3ef3
Add DEC_550 (Miata).
1998-06-05 17:03:07 +00:00
5790ee09ee
Revert...Jason didn't use Andrew's diffs.
1998-06-05 15:28:40 +00:00
8f455480ef
Tweak the copyrights a little bit. pci_550.h gets a TNF copyright, not
...
CMU, and pci_550.c keeps TNF but gets "Andrew Gallatin and Jason R. Thorpe".
1998-06-05 03:34:27 +00:00
cf914cac00
oops, read CNFG on all Pyxis revs.
1998-06-05 02:15:38 +00:00
cbaedc8675
Support for the Digital Personal Workstation [456]xx, a.k.a. Miata (systype
...
DEC_550). Mostly cloned from the EB164 systype, with some modifications
from myself, and a few more from Andrew Gellatin.
1998-06-05 02:13:41 +00:00
3cfb38c5d1
Define the Pyxis interrupt request register.
1998-06-05 00:53:02 +00:00
3249813e11
For whatever reason, the firmware seems to enable PCI loopback mode if it
...
also enables BWX. Make sure it's enabled if we have an old, buggy firmware
rev.
1998-06-04 22:58:33 +00:00
d4d49905dd
Add support for using BWX for PCI config space and PCI i/o and mem space
...
on the ALCOR2 and Pyxis. BWX is enabled iff:
- It hasn't been disabled by the user (patch `cia_use_bwx' or build cia.o
with the option "CIA_USE_BWX=0"),
- it's enabled in CIA_CSR_CNFG,
- we are running on an EV5-family processor,
- BWX is in the processor's capabilities mask.
1998-06-04 21:34:45 +00:00
616125f8d1
Deal with a hardware bug in Pass 1 and Pass 2 Pyxis chips. Basically,
...
the scatter/gather TLB cannot be invalidated on these chips. So, to
work around this, we configure the otherwise unsed DMA Window 2 as a
2M SGMAP window at 128M, point all of its page table entries at the
DMA spill page, and, when the TLB is to be invalidated, put the PCI bus
into loopback mode, and create a target hit on Window 2 every 64k for
the number of TLB entries (plus a few ... it seems to not work unless
we read a few extra times), forcing out old TLB entries to make room for
the new, dummy target hits.
1998-06-04 18:11:23 +00:00
a51d42503c
Export the spill page PTE, and provide a hook to initialize it early.
1998-06-04 01:22:52 +00:00
6dc28f5445
CIA and Pyxis have 8 scatter/gather TLB entries.
1998-06-04 01:18:22 +00:00
32fef69ef7
Define the CIA control register.
1998-06-04 01:04:11 +00:00
d94f02f9fd
Ok, now we _REALLY_ have Pyxis recognition correct. There are two systypes
...
that can have Pyxis: EB164 (AlphaPC164LX and AlphaPC164SX) and DEC_550 (Miata),
and these systypes/variations _always_ have Pyxis.
1998-06-03 23:16:55 +00:00
44605ba506
Define a bunch more system variations.
1998-06-03 23:07:38 +00:00
15c52040a5
Define the ALT_MEM big in the CIA revision register.
1998-06-03 22:19:08 +00:00
9f5797ac1d
turn on Essential HIPPI for these configurations
1998-06-03 21:16:28 +00:00
d6041754c2
Allow the DMA tag to specify a boundary contraint. If the device has a
...
more strict boundary, the map will use it, otherwise the map will inherit
the tag's, unless the tag's constraint is 0 (no boundary constraint).
1998-06-03 18:25:53 +00:00
50be447da3
Sync the bus_dmamap_load back-end functions between alpha and i386. (only
...
slight, unnecessary differences)
1998-06-03 04:15:05 +00:00
7022024d4a
Add epic* at pci?
1998-06-02 01:43:33 +00:00
a7f360c6c9
Specify a non-profiling C rule.
1998-05-31 23:25:41 +00:00
5d6bc16daa
more optimizations
1998-05-29 15:55:34 +00:00
164da176e8
Add boundary checks to _bus_dma_load...
1998-05-29 15:25:07 +00:00
0c05b92da1
pull in new PC display headers
1998-05-28 16:59:31 +00:00
c59c1eae2a
Define ioasic device offsets in terms of standard ioasic "slot" offsets.
1998-05-27 00:18:13 +00:00
1ef3ca572e
- Additional rearrangement for the sake of running on the DECstation some
...
day.
- Convert to use bus_dma.
- Fix cleaning up unaligned start address.
- Correctly determine if the device supports Fast SCSI, and adjust the
minimum sync period accordingly.
- Compute minimum sync period correctly on the 25MHz devices.
- Use GPI2 to determine if we're a 25MHz or 40MHz device.
- Currectly determine SCSI ID and "fast mode enabled" for the built-in
TCDS on DEC 3000 models, using cached information from the PROM environment.
1998-05-26 23:43:05 +00:00
ab087002d1
Make this into a proper attachment (i.e. use asc_tcds) and clean up
...
the namespace accordingly.
1998-05-26 23:37:44 +00:00
3aa84f9e26
- Make this into a proper attachment (i.e. use asc_tcds) and clean up
...
the namespace accordingly.
- Set FCLK in the CFG3 register if we have a > 25MHz clock.
- Indicate that we support Fast mode to the back-end if we're told we're
fast by the TCDS layer.
- Correctly compute the minimum sync period.
1998-05-26 23:37:27 +00:00
3ce836df8d
Make the TCDS attachment of the ASC driver a proper attachment (i.e.
...
attach it with asc_tcds).
1998-05-26 23:34:23 +00:00
2d384ae1a1
GPI2 in the CIR register indicates our clock speed: 1 = 25MHz, 0 = 40MHz.
1998-05-26 22:48:01 +00:00
a97fc2f180
If any of _ANSI_SOURCE, _POSIX_C_SOURCE or _XOPEN_SOURCE are defined, don't
...
provide any identifiers other than sig_atomic_t.
1998-05-25 20:59:01 +00:00
e569598438
On DEC 3000s, ask the prom for the SCSI ID and "fast mode enabled" of
...
the built-in TCDS, while we can still access the prom.
1998-05-25 05:16:42 +00:00
085b73d2db
Add "SCSIID" and "SCSIFAST" environment variables present on the
...
DEC 3000 systems.
1998-05-25 04:01:10 +00:00
57c68363d6
Add support for reading the SCSI ID and "fast mode enabled" from the
...
PMAZB-AA and PMAZC-AA EEPROM.
1998-05-25 01:14:38 +00:00
3b9e9634fb
- Change the tcds child locator from "slot" to "chip", making it look less
...
like a TurboChannel locator, and more like what is actually going on.
- Allow tcds and asc children of tcds to be cloned.
1998-05-24 23:45:29 +00:00
d3ead78027
Several changes to the TurboChannel Dual SCSI driver:
...
- Fix the autoconfiguration model; the TCDS children don't attach to
TurboChannel, so don't make it look like they do.
- Make the driver use bus_space (not bus_dma yet; soon)
- Recognize the PMAZ-FS (baseboard fast SCSI on DEC 3000s) and the
PMAZB-AA (TCDS option card) and PMAZC-AA (TCDS fast SCSI option card).
- Rearrange it a bit, so that it can eventually be made into an "MI"
TurboChannel driver (i.e. work on DECstations).
1998-05-24 23:41:42 +00:00
a3073631d7
Rebury an old mach-vm-quirk warning, for mach vm kernels.
1998-05-24 22:15:19 +00:00
1ce82f8f84
Fix previous to kill gcc warning in non-DEBUG compile.
1998-05-24 20:59:49 +00:00
66e7b8998f
Only disable stray interrupts if there is no interrupt handler attached
1998-05-24 19:09:57 +00:00
a54568bc38
Add PCMCIA hooks (taken from files.i386)
1998-05-23 22:42:14 +00:00
02ae2c98b3
In pmap_pv_enter() untangle the allocated pv (now "newpv") and the DEBUG
...
loop temporary so DEBUG kernels don't trap on startup.
1998-05-23 22:23:09 +00:00
30e2441b99
Prototype sio_intr_alloc().
1998-05-23 21:36:33 +00:00
9c2e213217
Add sio_intr_alloc (copied from i386's isa_intr_alloc) for PCMCIA.
1998-05-23 18:35:56 +00:00
11e1975af7
Add isa_intr_alloc macro (for PCMCIA).
1998-05-23 18:35:03 +00:00
3dfd62c76f
cs_heldchar is gone.
1998-05-23 00:51:10 +00:00
0cb3acc9ae
Correct a small, but fatal, typo.
1998-05-21 23:38:04 +00:00
93d96b3415
Add LOCKDEBUG (commented out).
1998-05-20 18:09:16 +00:00
a2f214a443
Add fine-grained locking, using a locking protocol modeled after the i386
...
UVM pmap's locking protocol, written by Chuck Cranor. Not all of the
support for multiple processors is here yet, but the kernel does run
under moderate loads with LOCKDEBUG (all locking operations are no-ops
unless LOCKDEBUG is turned on).
This is by no means complete... there are still some possible snares
to take a look at.
1998-05-20 04:05:50 +00:00
6626878e7b
It is no longer necessary for pmap_pinit() and pmap_release() to be
...
pmap interface functions, as NetBSD no longer uses statically allocated
pmaps (except for the kernel pmap, which is special-cased anyhow).
1998-05-19 19:00:11 +00:00
ca819f2940
Argh, finish renaming Lev1map to kernel_lev1map.
1998-05-19 18:35:11 +00:00
eaf145ad5e
Make function naming consistent, and teach pmap_pv_dump() about page
...
usage types.
1998-05-19 05:21:34 +00:00
dc13176aec
No need to keep global pointers to the initial kernel level 2 and level 3
...
page tables. Also, rename Lev1map to kernel_lev1map.
1998-05-19 02:57:01 +00:00
804e5be6f7
Nuke `register'.
1998-05-19 02:43:48 +00:00
293854e385
Put pmap_initialized in the BSS segment.
1998-05-19 02:42:41 +00:00
ca12fa7ebe
Make PT page reference counting more generic so it can be used for other
...
special use page types.
1998-05-19 02:04:28 +00:00
8fdc16212f
The Alpha architecture has a variable page size; don't hardwire the
...
number of PV entries per page at compile time.
1998-05-19 00:42:16 +00:00
b44dc2ecbf
Make the page attribute manifest constant names have similar form to
...
page usage manifest constant names.
1998-05-19 00:29:03 +00:00
180f140a85
Keep track of page usage inside the pmap (pvent, l{1,2,3}pt page, "normal").
1998-05-19 00:20:21 +00:00
ba482f242f
Fix lc0 (lemac) line(s) so that the de20[345]s will work again. Add depca
...
for de20[012]s (tested and works on a pc164sx).
1998-05-14 21:53:40 +00:00
95bdb660ed
Simple screen attribute handling for wscons.
...
The graphics device driver passes a "default attribute" for normal text
output to the wscons framework. If the emulation module needs more
attributes (for different "renditions") it can allocate them via a
callback.
For now, only the "sun" emulation makes use of it.
1998-05-14 20:49:55 +00:00
d19fbe1196
Garbage-collect the old confargs stuff that was used in the Early Days.
...
It isn't really appropriate anymore. Replace it with a real mainbus
attach args structure.
1998-05-14 00:01:30 +00:00
6a49b0a33e
Clean up some historical artifacts.
1998-05-13 23:38:26 +00:00
748d204949
Cleanup TurboLaser autoconfiguration somewhat.
1998-05-13 23:23:23 +00:00
b24eb75496
Clean up a buglet.
1998-05-13 23:22:08 +00:00
ca9600b324
Implement and use gbussubmatch().
1998-05-13 22:13:35 +00:00
326f8183dc
No need to hard-code the mcclock offset on the gbus; gbus is direct-config.
1998-05-13 22:03:07 +00:00
fb9726fe91
Add a few files related to the Digital Personal Workstation.
1998-05-13 21:59:32 +00:00
49aa171ab9
Add support for chaining DMA windows together, for falling back on
...
SGMAPs if a direct-mapped window fails.
1998-05-13 21:21:16 +00:00
b012e4e39b
Normalize gbus configuration somewhat, and add support for configuring
...
the Zilog DUARTs.
1998-05-13 02:50:29 +00:00
6172f5a0ac
Use flags instead of a bunch of booleans. Add a "use bwx" flag.
1998-05-12 19:07:21 +00:00
0b64ea0879
Gah, typo.
1998-05-12 18:45:04 +00:00
86ee1b1000
Oops, and the writes, too.
1998-05-12 18:44:32 +00:00
cc45d00d3c
Clean up the code that puts the PCI controller into config mode 1; no
...
functional difference.
1998-05-12 18:40:44 +00:00
34bbe5cd80
Rework ALCOR/ALCOR2/Pyxis recognition Yet Again. (Actually, just the
...
way it's displayed, and mask off the revision once we've determined
which chip we're talking to.)
1998-05-11 23:56:16 +00:00
0624060713
Rework PCI interrupt mapping on the EB164 systype. Rather than computing
...
interrupt routing directly, use the interrupt routing information provided
in the PCI "line" register. The previous scheme did not work properly on
AlphaPC 164SXs. Also, be silent about the fact that 0/8/x does not
have its interrupt mapped; this is to be expected on the 164SX (this is
the Cypress PCI-ISA bridge, which has IDE wired to compat mode on functions
1 and 2; the 164SX does _not_ have PCI IDE on device 11 like other AlphaPCs).
1998-05-11 23:36:46 +00:00
d5157b2b05
Sync w/ reality
1998-05-11 00:34:24 +00:00
687ea7404c
Fix some arithmetics lossage on typeless pointers.
1998-05-08 16:55:15 +00:00
4665241bf8
Simplify the direct-mapped DMA case somewhat by adding a window base
...
member to the DMA tag, and calling the direct-mapped back-ends directly,
rather than through chipset-specific front-ends which pass the window
base as an additional argument.
1998-05-07 20:09:37 +00:00
294015435b
remove the unneccessary alpha_mbs and slight cleanup
1998-05-05 22:01:54 +00:00
742983f1eb
make it impossible to compile w/o SIO (you cannot have a console otherwise
1998-05-05 22:01:31 +00:00
1363662600
update for new ws stuff, plus cleanup
1998-05-05 22:00:28 +00:00
0713044d87
carry over new ws words from GENERIC
1998-05-05 20:29:18 +00:00
bcfe658515
Move declaration within block where it will be used (in case
...
keyboard not defined).
1998-05-05 20:10:05 +00:00
88bf077524
Don't need options UVM and PMAP_NEW anymore; they're now standard.
1998-05-04 04:38:28 +00:00
22e3e4691d
Make UVM+PMAP_NEW the standard VM system on NetBSD/alpha.
1998-05-04 04:35:46 +00:00
53dbd5b7fc
Add file-system MFS to support ftp download of sysinst.
1998-05-03 23:15:45 +00:00
abbe1b7df3
Add Ensoniq AudioPCI driver. Commented out until tested.
1998-05-01 22:26:54 +00:00
b3cdc88a22
Fix some whitespace.
1998-05-01 05:22:16 +00:00
d38d75c9fb
Include net/route.h
1998-04-30 08:27:59 +00:00
1e075b072d
Rewrite active_pmap() and again kill the reborn curproc bug.
1998-04-30 08:27:00 +00:00
de4d1c62af
pretty much redo interrupt code- now handles shared interrupts and solves the buspin int problem
1998-04-30 04:31:19 +00:00
e3904356a4
do some mbs before a config read/write
1998-04-30 04:25:22 +00:00
1686aca01d
Pull in opt_gateway.h as appropriate.
1998-04-29 23:11:00 +00:00
9e97d1cc17
Define Pyxis Interrupt Mask and General Purpose Output registers.
1998-04-29 03:09:26 +00:00
47a53b61ec
Add the DEC 550 Personal Workstation slot.
1998-04-29 02:41:41 +00:00
371b1a7fb7
Define the DEC 550 Personal Workstation (Miata) systype.
1998-04-29 02:39:24 +00:00
829fa05638
Ignore any `-' characters that might have been passed in the boot flags.
1998-04-29 02:13:51 +00:00
a152517daa
Add interrupt counter space for the DEC EB64+, and fix a misplaced
...
counter comment in the kn300 interrupt counters.
1998-04-29 00:34:06 +00:00
28b467b65b
Add support for the DEC EB64+.
1998-04-29 00:24:59 +00:00
23a168699c
Build EB64+ PCI support if DEC_EB64PLUS is configured.
1998-04-29 00:24:28 +00:00
861c7a7e2d
Add a stub pckbc_machdep_cnattach() which simply returns an error. This
...
function is meant to glue the new pckbd driver to the old console code
on ports which use the old PC-style console code. This will eventually
be purged when all of the old legacy consoles have gone away.
1998-04-28 19:14:27 +00:00
4ccb48a525
Try (again) to get the chip number right for Alcor and Pyxis, using the
...
following (iffy) hueristic:
CIA revision 1 -> 21171
CIA revision 2 -> 21172
CIA revision > 2 -> 21174
1998-04-28 18:11:35 +00:00
b217194508
Fix the semantics (and the comment describing them) of pmap_update(). This
...
function is intended to process any deferred pmap operations, and is not
meant as a general means of flushing the TLB. Since this pmap module does
not defer any operations, make pmap_update() do nothing.
1998-04-27 19:17:16 +00:00
30188853dc
Increase the efficiency of pmap_l{2,3}pte() somewhat, by allowing the
...
caller to pass an optional 3rd argument, which is the previous level
PTE corresponding the virtual address. If this argument is non-NULL,
the table walk otherwise necessary will be bypassed.
1998-04-27 19:07:03 +00:00
a53c1863fe
Provide definitions for intptr_t and uintptr_t, signed resp. unsigned integral
...
types large enough to hold any pointer.
1998-04-27 17:39:10 +00:00
7f77474219
Oops, forgot to delete. It's in dev/pci now.
1998-04-26 11:57:00 +00:00
384418e4b7
"Whitespace" does not mean uncommenting a reference to a file that does not, as yet, exist in the tree
1998-04-26 05:18:50 +00:00
b6eff278f2
Fix some whitespace lossage.
1998-04-25 00:12:44 +00:00
660e718e2e
Drivers for PC-like console devices are MI now.
1998-04-24 20:05:54 +00:00
6f3b521cd5
Whitespace sanity.
1998-04-24 18:18:41 +00:00
6cd64be0b6
fix minor typo
1998-04-24 01:25:18 +00:00
2b6154a68c
Add PCI IDE.
1998-04-18 01:19:40 +00:00
792e89a201
Add PCI IDE goop.
1998-04-18 01:19:08 +00:00
4fc79b8fd3
First cut at PCI IDE compat interrupt support for the EB164 systype.
...
PCI IDE is found on the AlphaPC 164SX's Cypress PCI-ISA bridge.
1998-04-18 01:18:37 +00:00
574b87a792
Initialize the PCI IDE compat interrupt PCI method to NULL; PCI IDE
...
compat interrupts are not currently supported on these platforms.
1998-04-18 01:12:23 +00:00
78c7ebb2d0
Add a second Alpha-specific pci_chipset_tag_t method for establishing
...
PCI IDE compat interrupts. Note that this function is optional, and
platform-specific code may initialize the pointer to NULL.
1998-04-18 01:10:54 +00:00
a5f006fb5f
Fix a typo.
1998-04-18 01:09:20 +00:00
783382095c
Machine-dependent bits for PCI IDE. This redirects PCI IDE compat interrupt
...
goop to the appropriate platform-dependent code.
1998-04-18 01:08:52 +00:00
e77859a612
Hmmm... handle the case where there is no keyboard configured (panic
...
if the console selection is asking for it). Also add the stuff that
was missing from dec_kn300.
1998-04-17 02:45:19 +00:00
815703e5ec
Make function names in printfs and panics consistent.
1998-04-16 19:50:55 +00:00
a048ee73ca
Fix a whitespace botch.
1998-04-16 19:40:56 +00:00
2615a1d8d3
Allow device 8 (the SIO) to have its interrupt mapped; there might be
...
a PCI IDE controller on one of the PCI-ISA bridge's functions (e.g.
AlphaPC 164SX).
1998-04-16 19:24:24 +00:00
3cc1fe831c
count allocated screens correctly
1998-04-16 12:52:42 +00:00
c72ac312a7
Add pcppi/spkr drivers, and use DHCP for NFS boots.
1998-04-16 04:11:50 +00:00
thorpej