- print the socketcall type
- special case socket(2) call, it's also the only one with first argument
not being a socket descriptor
- only dump the relevant part of linux_socketcall_dummy_args, instead
of always the whole structure
and marked as out of window - trying to do the add will result in a failure
and the packet being blocked, incorrectly.
Committed By: darrenr
Tested By: smb
With no menu items the mbr_bootsel code will wait for the timeout (default
10 seconds) and then boot the default device - usually the active partition.
Forcing the 'active' partition was wrong - jmmv has a system which needs
to boot from hd1 where hd0 has no mbr partition info.
I suspect the problem I though rev 1.7 fixed was actually caused by
disklabel copying sector zero of the disk to sector zero of the partition!
Gains another 9 bytes of free space, mbr_bootsel now has 20 free bytes.
- decrement uvmexp.anonpages as it's no longer an anon page.
- null out anon->u.an_page as the anon no longer own the page.
uvm_anfree: add related assertions.
which bustype should be attached with a specific call to config_found()
(from a "mainbus" or a bus bridge).
Do it for isa/eisa/mca and pci/agp for now. These buses all attach to
an mi interface attribute "isabus", "eisabus" etc., and the autoconf
framework now allows to specify an interface attribute on config_found()
and config_search(), which limits the search of matching config data
to these which attach to that specific attribute.
So we basically have to call config_found_ia(..., "foobus", ...) where
such a bus is attached.
As a consequence, where a "mainbus" or alike also attaches other
devices (eg CPUs) which do not attach to a specific attribute yet,
we need at least pass an attribute name (different from "foobus") so
that the foo bus is not found at these places. This made some minor
changes necessary which are not obviously related to the mentioned buses.
internally (shouldn't make a difference for callers)
-add convenience macros for config_found() and config_search() to
ease the case where just an interface attribute is specified
- Clean up the namespace of this module and enable the encode/decode
functions and printing functions.
- Move the code that actually generates the UUID out of the system call
routine and into its own function.
com_mainbus_cninit() and move these cn functions from cobalt/console.c
to dev/com_mainbus.c
- call cninit() only once
- remove unneeded includes
- use ANSI function decls
grow-down auto extend segment) by allocating segment sized at
current stack size limit, and offsetting requested/returned address
as required
due to how normal virtual memory management work, allocating the
full sized stack memory segment up-front actually requires exactly same
amount of VA space and physical memory as the Linux 'grow' scheme and the
'grow' scheme is quite a lot more difficult to use in applications correctly,
so it's not very apparent why Linux introduced this feature at all
this fixes Thomas Klausner's Heroes3 crash, and might also
fix PR 26687 by Jan Schaumann
in cpu_initclocks(9) via a callback function.
Fixes the "hardclock(9) is called before cpu_initclocks(9)" problem
reported by KIYOHARA Takashi on port-cobalt.
- Use bus_space(9) functions to access GT64111 registers and
add register definitions for GT64111 in gtreg.h.
(XXX this could be in sys/dev/marvell?)
- Move microtime(9) from machdep.c to clock.c, and read timer0 register
via a callback function. Also change microtime(9) like other ports
to guarantee that the time will be greater than the value obtained
by a previous call.
sd3(mpt0:0:1:0): unable to allocate scsipi_xfer
sd3: not queued, error 12
Havard Eidnes's analysis of this problem is that the scsipi_xfer pool is
competing for resources with other pools, including the the inode and vnode
pools which can grow quite large.
*_scsipi_cmd(): don't biodone the buffer if scsipi_make_xs() fails, let the
caller deal with the problem
start function of block devices drivers: dequeue the buffer after the
scsipi_command() call. If scsipi_command() fails with ENOMEM don't dequeue
the buffer, and schedule a callout to call the start function after
some delay.
scsipi_init(): prime the scsipi_xfer_pool with one page. This ensure that
there is always some scsipi_xfer to play with. If scsipi_command() fails
because of pool_get(), we're sure there will be resources available later,
when the pending commands have completed.
Reviewed by Jason Thorpe and Havard Eidnes.
Todo: remove the "unable to allocate scsipi_xfer" and "not queued, error %d"
printfs, but I choose to keep them for now, to help make sure the code does
what it should.
* Get rid of PTmap, PTD, PTDpde, APTmap, APTD, and APTDpde from locore.S.
* Rename PTDpaddr to PDPpaddr, ptdpaddr in struct cpu_kcore_hdr to pdppaddr for consistency.
> Call dom_dispose() for any SCM_RIGHTS message that went through the
> read path rather than recv. Previously, if an fd was passed via
> sendmsg() but was consumed by the receiver via read() the ref count
> was incremented and never decremented and so the ref count would
> never reach zero even when there was no long any processes holding
> the file open (this was especially bad for locked fds).
obtained.
Switch to EVCNT_ATTACH_STATIC*
In DEBUG/DIAGNOSTIC, decrement/increment pmap_pvo_enter_depth around pool
calls since they could possibly cause a recursion back into pmap_pvo_enter.
for i/o requests which are expected not to fail due to permission
to mimic unix file open semantics (READ, WRITE, COMMIT),
try two credentials. namely, the file owner's one and open time one.
remember which credential worked in per-file basis and try it first
next time to minimize number of retries.
ideas from Chuck Silvers. PR/23716 and PR/24987.
sys/kern/exec_aout.c back in *1995*, apparently the line from my
license notice:
* must display the following acknowledgement:
was accidentally dropped. This mistake was propagated into
hpux_exec_aout.c when it was split out of hpux_exec.c.
(Thanks to hubertf for noticing!)
preprocessor hackery. If supporting Thumb add an 18th undefined
handler for undefined instruction traps taken in Thumb state. Kill
MAX_COPROCS and use NUM_UNKNOWN_HANDLERS instead.
Add support for breakpoints set in Thumb code and hand them off to
GDB as required.
Note: this may need further work. For the momement we unconditionally
convert a Thumb SWI insn into an ARM SWI with the operation code
zero-extended to 24 bits. However, this should really be a property
of the emulation (how do we know that all emulated systems would want
to work this way?), but that would mean pushing all the handling down
into each of the emulators.
If supporting architecture 5, enable Thumb code support.
Note: we could probably enable this for 4T processors as well, but
getting interworking right is much more tricky.
architecture defines passed from the compiler.
Define RET and RETc macros for return and conditional return. If BX is
available in the current instruction set then make use of it.
Note: these really are from the compiler's -march/-mcpu flags, not
from the kernel config, so they can be relied on in user space.
- Add an ata_reset_channel() function that performs the common parts
of resetting an ATA channel, which uses the (*ata_reset_channel)()
callback to do the heavy lifting. Adjust callers to use ata_reset_channel()
instead of wdc_reset_channel().
This removes the last wdc-specific code from ata.c!
the ata_bustype for the controller. Fill it in and use it instead
of referencing wdc_ata_bustype directly.
- Add an atac_atapibus_attach member to atac_softc to hold a pointer
to the function that attaches the ATAPI bus for the controller. Fill
it in and use it instead of referencing wdc_atapibus_attach directly.
ata_channel.
- Add and use a CHAN_TO_WDC_REGS() macro to get the wdc_regs from an
ata_channel.
- Add and use a CHAN_TO_PCIIDE() macro to get the pciide_softc from an
ata_channel.
- Add and use a CHAN_TO_PCHAN() macro to get the pciide_channel from an
ata_channel. (This one just hides a cast, and is really just for
consistency with the others.)
This code needs cleanup, at least a reasonable linked list
implementation (fixed a bug in detach_card() in the process which
left a dangling pointer around).
Also removed a questionable and undocumented use of the parent's
device unit number as locator value.
(As with the pcmcia code: someone please review wrt powerup/down etc.)
sekiya