attempt results in the up and down arrows not repeating in the X server.
The keyboard division table is modified to place the Right-Shift keycode
into division 6 along with the Left-Shift and Control. A corresponding
change to the X server lk201 keyboard handler is also required.
This got lost when disk geometry processing was updated.
Also move the CDROM check from rzread() to rzwrite() - it doesn't make
much sense to report a read-only filesystem error when trying to read a
CDROM.
-sys/lib/libkern builds as library per default (as it was documented all
the time)
-ports able to LKM set "KERN_AS=obj" explicitely in their Makefiles
(for now; should depend on actual "option LKM" or -better- functions
included for LKM use should be pulled in by a stub)
-always link libcompat before libkern - libkern stuff can be referred to
by libcompat, but not the other way
struct scsipi_adapter; they were not used.
Add a scsipi_ioctl entry point to struct scsipi_adapter. This will be
used to issue ioctl commands to the host adapters.
Inspired by PR #6090, from Matt Jacob.
Adds (most) support for ARC platform to port-independent mips code.
Some changes (e.g., clean up of overlapping CPU/FPU ids) inspired by
comparison to the OpenBSD 2.1 codebase of Soda's ARC port.
Open issues:
* Still no support for r4600 or mipsIV CPUs with two-way L1 cache.
Code derived from Per Fogelstrom's OpenBSD source doesn't work
on mips3 pmaxes with L2 cache.
* Still some port-specific #ifdefs, for interrupt enable and
pmax L2 cache-size. Needs more thought, but overlaps with
work-in-progress by Tohru and Tsubai on spl()s and related stuff.
initialized yet. Use the base variable, and also use the symbolic symbols
to acdess the registers. Also, the console max_rows is based on the
display height, not the width.
- bump cpu_model[] length as the longest name occupies over 30 characters.
- place machine_arch[] beside machine[] for clearity.
- nuke useless #include directives.
- small scale cleanup in vm_machdep.c
as with user-land programs, include files are installed by each directory
in the tree that has includes to install. (This allows more flexibility
as to what gets installed, makes 'partial installs' easier, and gives us
more options as to which machines' includes get installed at any given
time.) The old SYS_INCLUDES={symlinks,copies} behaviours are _both_
still supported, though at least one bug in the 'symlinks' case is
fixed by this change. Include files can't be build before installation,
so directories that have includes as targets (e.g. dev/pci) have to move
those targets into a different Makefile.
making performance of bus_dma drivers not completely suck on the DECstation.
XXX R4000 case is still abysmal, because some other data structure
modification is required to deal with the virtually-indexed R4000 cache.
controllers (including SCSI id 7 on the 2100/3100).
- On the pmax (2100,3100) set the host SCSI id to 6.
- Move disk and tape config for the second ASC controller from the GENERIC
config file to scsi.pmax so all configurations can use the second
controller.
* ibus (virtual bus for baseboard direct-attach deviecs)
* 5100 support, using ibus
* rename "clock" to mcclock for future support of Qbus machiens
* use sys/dev/dec mcclock_pad32 machinery for pmax mcclock
* reworked TC config code.
Also make TC framebuffer-console search table-driven.
Does not yet include "tcasic" layer; there's no such hardware on DECstations
and nothing for a tcasic layer to do.
into sys/dev/dec and split into a clockfns layer and a "middle" layer
for other DEC systems which use mcclocks with each onchip byte
register padded out to a 32-bit word.
Clone alpha/alpha/mcclock (also duplicated in pmax port) into
sys/dev/dec, and ifdef for default clockrates on pmax and alpha.
Use new machinery on pmax for ibus,ioasic attached mcclocks.
read and write compare register (controls cycle-driven periodic interrupt).
Use cycle counter for microsecond time on mips3, but for now only on
3min motherboards (5000/150). the MAXINE baseboard microsecond
counter is more stable and I don't ave no 5000/260 to test.
XXX clkread() is a mess, it should be rewritten.
XXX should add nanotime() to give inkernel nanosecond resolution,
and then microtime() reworked to use nanotime().
* dec_5100.c: sysconf, interrupt, and motherboard (drain writebuffer)
support for 5100.
* support for hardware kludge in 5100: sii DMA buffer is hardware
padded to alternate 32-bit words, not alternating 16-bit halfwords.
* 5100 has no framebuffer, console is wired to serial port 0.
With ibus support, boots as far as exec'ing init, and hangs.
a HAVE_GCC28 check-variable that can now be used to add other gcc-2.8
flags in cases where they may be useful, or to remove gcc 2.7.2 "bug
workaround" flags.)
dec_3max.c into a shared file. These models have compatible memory
subsystems, the same memory slots, and (apparently) the same error reporting.
Add markers for where MNN probes for configurations with a mixture of
RAM sizes and for Prestoserve NVRAM (in normal RAM slots) should go.
interrupt-callout vector from mips locore dispatch code to port code.
* Move branch-emulation declaration to mips/include/trap.h.
* Garbage-collect pmax/pmax/trap.h.
Not needed now pmax/pmax_trap.c is gone, and after above tidy-up.
Replace all DS5000_* and DS3100 ifdefs with ifdefs on DEC_ options.
* Use MI declarations, not pmax-specific, in model-specific init
that uses baseboard (ioasic) registers.
* Further cleanup of machdep.c. Clock-tick still needs more thought.
* Use 'ibus' names for 3100 baseboard devices in MI code.
* add "Platform" support inpmax/pmax/sysconf.c and pmax/include/sysconf.h
(based on Alpha cpuconf.[ch], with a namechange to avoid clashes with
support for models of MIPS cpus. They differ more than Alphas).
* For each supported model of DECstation, create a separate file
with the support for that model. Use model codenames, since
support is really baseboard-specific and CPU daugherboards can change.
Move code from machdep.c and pmax_trap.c,
Add sysconf (nee "cpuconf") support.
* Rename model-specific functions to match sysconf names.
* Clean up autoconf.c. Use platform callbacks.
* Retire pmax_trap.c.
Leaves I/O bus configuration and console configuration untouched.
as pmax/dev/findcons.c:
* Follow the same logic: look for the device the PROM is using.
* If it's a framebuffer and we don't have a driver for it, try other
* framebuffers in PROM search order.
* If no match found, warn user and fall over to serial console.
* if no serial console found, go back to PROM.
Rework tc/scc.c attach routine to give cleaner initialization semantics.
Prune out old 'braindamage' code.
* Do rcons output properly, using cn_tab->cn_dev which points
at rcons cdevsw entrypoints.
* The pmadx console code was using keyboard (serial) device
(major,minor) for raster consoles with special code in the keyboard
drivers to catch output intended for consoles, pull it off the device
queue, and print them via cnputc().
Ifdef out RCONS_BRAINDAMAGE.
* Other minor cleanup to pmax scc driver.
also calls biowait().
Some drives seek to modepage on every modepage geometry-sense in rzready()
cache dev_t of last readied device in rzdump() to elide rzready() calls.
2x speedup of dumps on rz25 and 20x-30x speedup on some IBM OEM 4gig drives.
mhitch