jonathan
5124d90b3b
Work around a NetBSd/pmax kernel bug inherited from 4.4BSD: the DEC
...
TURBOChannel cfb has a vertical-retrace interupt that cannot be disabled
in software. 4.4BSD and NetBSD don't supply an interrupt hander and
simply neverenable interrupts from slots with a cfb. This has never
ever worked with a cfb in a 3MIN (Decstation 5000/1xx), where a TURBOChannel
card in slot 0 (or 1 or 2) interrupts at the same IPL as spl0() (or spl1
or spl2), and there's also never been support for selectively enabling or
disabling those interrupts on a 3MIN, in either NetBSD or 4.4BSD.
This revision add an interrupt handler for the cfb, used only on 3MINs,
so that a 3MIN can boot with a cfb as console, and enable/disable of TC
slot interrupts can be debugged. (Serial consoles via ioasic SCCs still
don't quite work, and simply clearing the relevant bits in the R3000 cause
register is apparently over-ridden by a subsequent spl0() somewhere else.)
1995-08-29 09:56:23 +00:00
jonathan
2ddcaa8ac9
Fix references to ASIC_SLOT_RTC, which isn't yet defined on DECstations.
1995-08-29 09:43:37 +00:00
phil
288f1c084f
Changes from Matthias Pfaller to get gdb to work.
1995-08-29 08:03:27 +00:00
leo
9bc2fa9924
Link mount_<fstype> to <fstype> for all included fstypes...
1995-08-28 20:10:30 +00:00
leo
bd699fca29
Fix typo in previous commit
1995-08-28 20:07:04 +00:00
jonathan
bb16b9c249
External declarations for Decstation model-specific interrupt handers.
1995-08-28 20:01:34 +00:00
leo
dd73a31ed8
Detect type and precence of an FPU in the kernel instead of relying on GEM.
1995-08-28 19:31:06 +00:00
fvdl
cf13e627f4
Undo unintended parts of previous change.
1995-08-27 21:30:00 +00:00
fvdl
a084a7d3dd
Remove bogus check in ioctl(fd, VT_RELDISP, VT_FALSE). Needed for
...
Linux VT emul stuff. This fix was already applied in pcvt 3.30
1995-08-27 20:59:00 +00:00
fvdl
9ca2821d22
A couple of definitions added for previous changes.
1995-08-27 20:57:18 +00:00
fvdl
040bcc367d
Add some yucky code to emulate Linux VTs well enough to make svgalib
...
stuff work reasonably well.
1995-08-27 20:56:38 +00:00
fvdl
a7459f5321
syscalls.master changed
1995-08-27 20:53:31 +00:00
fvdl
d308963c5d
Add a hook for MD ioctl calls, plus a couple of more changes to make
...
svgalib binaries work on the i386
1995-08-27 20:51:48 +00:00
thorpej
4e7f37f974
Configure ccd devices before the filesystem checks, as suggested by
...
Thomas Eberhardt in PR #1408 .
1995-08-27 20:30:53 +00:00
pk
70c3710dfd
minor tweaks from Matthew Green (PR#1410)
1995-08-27 18:58:48 +00:00
pk
6c1353c677
Sync exit codes with man page (from Scott Burns).
1995-08-27 18:31:20 +00:00
phil
c002e84bbc
New distribution "floppies" from Matthias Pfaller.
1995-08-27 06:36:34 +00:00
phil
d096b0e5e1
pc532 specific interrupt code. (From Matthias Pfaller.)
1995-08-27 06:20:27 +00:00
phil
6a179f1f2e
VOID minphys.
1995-08-27 04:07:53 +00:00
ragge
a56625ebf4
forgot ufs -> ffs...
1995-08-25 21:31:12 +00:00
ragge
1cf91eafdf
etc files specific for vax added.
1995-08-25 21:25:09 +00:00
briggs
503d3c4927
Add constants for CSI's communications card.
1995-08-25 21:20:57 +00:00
leo
f3997751d0
Change all occurences of ufs to ffs.
1995-08-25 19:17:28 +00:00
pk
c94617858b
Just use umask(0);
...
Use mktemp() for temporary file creation.
1995-08-25 11:35:35 +00:00
pk
4edc2f666b
Ensure the hints file is readable.
1995-08-25 10:10:15 +00:00
pk
f6797ed4f1
Install the manual page.
1995-08-25 10:08:45 +00:00
phil
389484fe28
New kernels from Matthias Pfaller and addition of oldncr driver.
1995-08-25 07:58:21 +00:00
phil
441cd76f8f
Changes by Matthias Pfaller for generic support and dumping.
1995-08-25 07:52:18 +00:00
phil
0a3111b255
Various changes (from Matthias Pfaller) including support for a
...
more generic distribution kernel and dumps.
1995-08-25 07:49:04 +00:00
phil
47ff5d6b3d
More changes to the "new" ncr interrupt driven scsi driver (from M. Pfaller)
...
Bring back the old polled driver until a kernel built with the interrupt
driven one is stable enough for production use.
1995-08-25 07:30:33 +00:00
phil
32b3e66891
New way to calculate load address from Matthias Pfaller.
1995-08-25 05:11:36 +00:00
briggs
ac0af4229f
Change VIA2:vPCR setting to allow scsi IRQ and DRQ.
1995-08-25 02:56:41 +00:00
jonathan
60e0c381c1
Fix autoconfig table initializers for 3MIN (tested) and MAXINE (untested).
1995-08-24 22:32:18 +00:00
ragge
f525d4b280
Cleaned up an old #ifdef vax.
1995-08-24 19:58:07 +00:00
ghudson
bbfb3349c0
Call doshutdownhooks() before resetting the CPU. This should probably
...
be in architecture-independent code.
1995-08-24 19:16:47 +00:00
ragge
5362187bf6
Removed unnecessary #ifdef vax that broke compilation.
1995-08-24 17:04:40 +00:00
chopps
f73f65da20
couple fixes from Eduardo E. Horvath eeh@btr.com
1995-08-24 15:46:19 +00:00
mycroft
ce6374e6be
Do not terminate the search on errors other than ENOENT.
1995-08-24 05:26:35 +00:00
jtc
9232c298a8
Upgraded to Taylor UUCP 1.06.1 (Thanks to John Kohl).
1995-08-24 05:18:33 +00:00
briggs
1ed5c0babc
Some code to support a vector passed in from booter 1.8.
1995-08-24 04:27:16 +00:00
briggs
0484bdaf59
Don't panic on NMI and only take notice if DDB.
1995-08-24 04:25:07 +00:00
jtc
67c6c5cc72
don't define yydebug unless YYDEBUG is also defined; PR #1402
1995-08-24 00:45:23 +00:00
fvdl
72e901b9ff
syscalls.master changed
1995-08-23 20:19:15 +00:00
fvdl
28d9d64235
Emulate some syscalls that appear in Linux 1.3: a select() with normal args,
...
getdents() and flock().
1995-08-23 20:17:28 +00:00
thorpej
d6160bdc1b
Fix typo in comment, from Chris P. Ross.
1995-08-23 01:08:10 +00:00
thorpej
38634f3a18
Fix up a printf(), from Chris P. Ross.
1995-08-23 01:06:59 +00:00
thorpej
5194080841
Put SIOCGETVIFCNT and SIOCGETSGCNT in group `u'. This is consistent with
...
other systems' integration of Multicast release 3.5 and fixes the ENXIO
that these controls used to produce.
1995-08-23 00:40:47 +00:00
jtc
1f3a168f04
Call mount_ffs instead of mount_ufs; PR #1379
1995-08-22 19:58:33 +00:00
jtc
4086abf6dd
ufs -> ffs; PR #1381
1995-08-22 19:52:25 +00:00
jtc
0da9212559
recommanded -> recommended; PR #1395
1995-08-22 19:43:06 +00:00
