67e7cb40b1
fix print message when #undef VRGIUDEBUG and change a little.
2000-03-10 09:05:01 +00:00
7e044bd4e5
Move pretty much all of the PCI configuration goo into a separate
...
function.
2000-03-10 07:26:41 +00:00
370bc1832b
Normalize the copyright notice (TNF copyrights should *always* match
...
the appropriate template), and run through indent.
2000-03-10 07:11:47 +00:00
0fef451485
Pull the code that take the Tulip out of powersave mode into a separate
...
function.
2000-03-10 06:55:09 +00:00
f76ce3b475
Only poll for bell completion if we're calling in from cnbell(). Fixes
...
a problem reported by Lennart Augustsson.
2000-03-10 06:10:34 +00:00
0a77d41f4f
clean up lm0 example
2000-03-10 06:03:18 +00:00
cf32e2713c
Adopt the macro name change of if_ieee80211.h.
...
also fixed the value for receiving packets in infrastructure mode,
while no one has been tested with.
2000-03-10 05:47:42 +00:00
85656424da
Rename the macro IEEE80211_FC1_RCVFROM_XXX to IEEE80211_FC1_DIR_XXX
...
and fix the value to be consistent with IEEE 802.11 spec.
The only customer of this macro is if_ray driver for now.
2000-03-10 05:44:23 +00:00
0391e3393f
Slight change to the SROM size printf.
2000-03-10 02:46:39 +00:00
4c043eb094
Arrange 'vmstat -i' to show 'optslotN'; for interrupt counts of TC slot N
...
as well as DECsystem 5100 optional serial card slot N.
2000-03-10 01:31:22 +00:00
79d83d72e1
printf -> DPRINTF
...
vrisa_debug = 0 by default.
2000-03-10 01:30:06 +00:00
01a5f6c995
Create new kernel thread to issue statfs(2) system call to check free
...
disk space rather than doing it in timeout handler. This fixes long
standing bug that accounting file can't be put on NFS file system (so,
e.g, we couldn't turn on accounting on diskless system).
2000-03-10 01:13:18 +00:00
9f86839658
change Mb/s to MB/s (Megabit to megabyte).
2000-03-09 23:19:26 +00:00
87bf486935
Back out previous; it's now dead code.
2000-03-09 23:15:23 +00:00
0aaf8765ad
Add reminder to add stuff to ALPHA as well as this.
2000-03-09 22:27:26 +00:00
d5f475149c
The last change has proven unreliable. Attack the problem differently;
...
assume that the address we have is the correct PA if we can't
figure it out by groveling. This time it really (yes, really)
works on the PowerBook 14x/16x/170.
2000-03-09 22:27:09 +00:00
fe76319160
Add ident and RAID_AUTOCONFIG to bring up to date with GENERIC.
2000-03-09 22:26:41 +00:00
402493dee5
change member name for icmp6_filter, to be conformant to RFC2292.
...
From: Francis Dupont
2000-03-09 21:26:16 +00:00
c70220f2a2
Move PCIIDE_CHANNEL_NAME macro to pciidereg.h.
2000-03-09 20:26:31 +00:00
0bcbafe0ee
Correct the number of arguments to wsdisplay_set_cons_kbd(), for the
...
changes I made for cnbell().
2000-03-09 18:59:27 +00:00
0542cec055
put "#ifdef __alpha__" around "alpha_mb()" calls
...
(I know the driver is useless without console initialisation, but it
should at least compile.)
2000-03-09 18:40:36 +00:00
f3f4e44c39
fix typo
2000-03-09 16:49:22 +00:00
5af90382c5
Add missing chrtoblktbl entry.
2000-03-09 11:19:30 +00:00
24ea2caf14
regen
2000-03-09 09:53:03 +00:00
3abb87c0f5
Add Conexant SoftK56 PCI Software Modem, Sony CXD3222 OHCI i.LINK(IEEE 1394)
...
PCI controller, Sony Memory Stick I/F Controller
Ids send by John Hawkinson in kern/9588
2000-03-09 09:50:49 +00:00
ea089cf90c
New features:
...
tctrl now initializes the state of the internal LCD icons. The icons
are unprogrammed at boot time. This incidentally makes the DC-POWER icon
work.
Fixes:
Fix my stupidity in the ENVSYS stuff, and actually follow the API.
2000-03-09 07:04:08 +00:00
7e567738f2
support rfact. use manufac. suggested resistor values by default
...
clean up some comments
2000-03-09 04:20:58 +00:00
7e6d7b8613
use bus independent probe
2000-03-09 04:19:03 +00:00
ed0b72db8f
Add rfact multiplication factor for DC voltage sources
...
Clean up formatting (fit in 80 columns)
2000-03-09 04:13:58 +00:00
752c98f8ea
Add (commented out) lm driver examples
2000-03-09 04:12:42 +00:00
ebe08edbb2
add VS400 scsi attachment + a few other things
2000-03-09 02:05:07 +00:00
57032be837
disable scsi for ka49 until sgmap is adapted to it.
2000-03-09 02:02:12 +00:00
082a04f053
don't enable sgmap on ka49 yet.
2000-03-08 23:50:51 +00:00
f21e750db2
only have vmapbuf/vunmapbuf do anything on the ka46/48/49.
2000-03-08 23:49:10 +00:00
5a9b9df419
Do the interrupt dispatch somewhat differently than the previous fix.
...
This one is more in the spirit of incorrect version which was trying
to shorten the interrupt path. This probably isn't quite as fast as
using a switch() statement to dispatch the interrupts, but should be
a little faster than testing for each of the possible 6 interrupt
conditions.
2000-03-08 18:09:27 +00:00
e0d3ede01c
Get the status right when a polled transfer times out.
2000-03-08 15:34:10 +00:00
07574c3239
Add a debug message.
2000-03-08 15:33:38 +00:00
45f32a77f5
Clean up code a little and add some more debug messages.
2000-03-08 15:33:24 +00:00
fe02fcfe1e
GENERIC configration includes Cassiopeia E-55 CF card support.
2000-03-08 14:53:33 +00:00
b1e34812e4
Fix obvious off-by-one error in db_output().
...
Fixes kern/9570 by John Hawkinson.
2000-03-08 08:31:33 +00:00
0641e677c4
Using interrupt bits in a switch statement doesn't work very well if more
...
than one interrupt bit is set (unless you do some fancy case values).
Check each interrupt bit individually and process the interrupt if set.
5000/200 doesn't hang shortly after booting now.
2000-03-07 23:41:35 +00:00
ad7dbd825c
Define ISO C99 (unsigned) long long (min, max) symbols.
2000-03-07 19:33:00 +00:00
0c7df56c40
Define ISO C99 (unsigned) long long (min, max) symbols.
...
VS: ----------------------------------------------------------------------
2000-03-07 19:31:50 +00:00
a9ebf7bb8c
Define ISO C99 (unsigned) long long (min, max) symbols.
2000-03-07 19:31:49 +00:00
af00b7b880
split probe into generic and bus specific
2000-03-07 18:39:14 +00:00
56423f59aa
Use b_cylinder as defined in sys/buf.h.
2000-03-07 15:59:24 +00:00
d16c6f3272
Use DISKPART/DISKMINOR/DISKUNIT instead of dkpart/dkminor/dkunit.
2000-03-07 15:55:14 +00:00
d9d840d522
- Remove unnecessary prototype declaration of readdisklabel().
...
- Use DISKPART/DISKMINOR/DISKUNIT instead of dkpart/dkminor/dkunit.
2000-03-07 15:35:42 +00:00
4398e0bd07
Fix CardBus device number. Though CardBus device number should be 0,
...
the value of bridge's function number was assigned to the device
number.
2000-03-07 09:36:52 +00:00
6755970bcf
Low-level drivers, like the Power Manager driver, can get us into a major
...
funk when they misbehave and give us unexpected results. Specifically:
- Don't assume that the first free slot is at the top of the table if
we can't find one.
- Don't increment ADBNumDevices when backfilling "holes" left by devices
that didn't respond to a TALK R3 during the initial device scan.
- Don't assume that an address reassignment worked; make sure something
responds on the new address before plowing forward.
- If after device reassignment there are no free slots, make sure to
indicate this fact.
- Failing all else, handle the situation where we run out of slots in
the device table -- which now should "never" happen -- gracefully.
While the Power Manager driver still sometimes misbehaves, it shouldn't
cause the system to crash/hang due to us walking off the end of the
device table.
2000-03-07 06:35:22 +00:00
d315d42657
Back out part of 1.104 which isn't actually needed.
2000-03-07 05:39:57 +00:00
5a212f7999
Fix a splx() botch or two.
2000-03-07 04:58:35 +00:00
5913106c36
add '%INCLUDES'.
2000-03-07 04:17:27 +00:00
c1b54794fc
Add missing `cnt++'.
2000-03-07 03:37:39 +00:00
7ce8a9f46b
Also, fix indentation in previous commit.
2000-03-07 03:34:52 +00:00
7c57ac56d7
Cleanup a couple of function declarations. No functional changes.
2000-03-07 03:09:47 +00:00
51ffb0924c
Create a new rf_close_component() to handle vnode operations for closing
...
components. Teach rf_UnconfigureVnodes() how to use it, and tell
the copyback and reconstruction code about it too.
2000-03-07 02:59:50 +00:00
ddebc1cad0
Move rf_UnconfigureVnodes to rf_netbsdkintf.c where it will be more at home.
...
Add prototype to rf_kintf.h, and nuke old prototypes from rf_disks.c and
rf_driver.c .
2000-03-07 02:28:05 +00:00
33a55d022b
rf_ protect the component label print routine, and make it more easily
...
available to the rest of RAIDframe.
2000-03-07 02:12:13 +00:00
dbf5d1f7a6
Nuke unused code.
2000-03-07 01:54:29 +00:00
dfaacf6eab
Fix bug in previous.
2000-03-07 01:08:55 +00:00
8f8714687b
Reenable the code that clears SLEEP and SNOOZE from the CFDA register.
2000-03-07 01:08:47 +00:00
6cc1408bca
Only print SROM size if TLP_DEBUG.
2000-03-07 01:06:12 +00:00
2f1aff2da3
Garbage collect MIPS_SR_INT_ENAB/MIPS_SR_INT_ENA_CUR definitions.
2000-03-07 01:05:48 +00:00
4887635a10
A few things:
...
* Take advantage of the tulip_read_srom() changes.
* Don't frob the so-called `CFDA' register. We're really looking for the
PMCSR, which is in a different location anyway.
* Don't panic if we detach an interface for which we never called tlp_attach().
2000-03-07 00:43:36 +00:00
5eee9ca94c
Determine the size of the SROM by probing the chip using the standard Microwire
...
protocol. Eliminates the need for srom_quirks and some other trash.
2000-03-07 00:39:17 +00:00
064b1bd2e9
Fix obvious typo.
2000-03-07 00:33:13 +00:00
8b13d21260
Do a CARDBUS_BM_ENABLE to be sure.
2000-03-07 00:32:52 +00:00
de8398315a
Fix an obvious bug that caused I/O space to never be freed.
...
Also, don't use rbus_space_free() directly.
2000-03-07 00:31:46 +00:00
bcdcb370e5
Called the power function even for 5V cards. This at least gives the power
...
a chance to stabilize before we frob the card.
2000-03-07 00:30:57 +00:00
ebbd936b2c
Chnage chip freq to 25MHZ. panic if dmaaddr is not in the kernel's
...
address space. fix some printfs. (reads now work!)
2000-03-07 00:08:42 +00:00
10f359a6b5
clear the sgmap that was allocated
2000-03-07 00:07:16 +00:00
e8c7c2f842
add real vmapbuf/vunmapbuf routines. needed for VS4000 SCSI support.
2000-03-07 00:05:59 +00:00
e42cc6e32e
remove some unsed variables. make a bit efficeint.
2000-03-07 00:04:13 +00:00
42144199a1
- Make the pcppi and pckbd drivers cooperate a little more -- pckbd provides
...
a call to hook up a bell-ringer (since the keyboard itself has no bell).
This eliminates the need for #ifdefs for the bell-ringer in the pckbd
driver.
- Add cnbell() support to pckbd.
2000-03-06 21:40:08 +00:00
da4dc67d3e
Add cnbell() support.
2000-03-06 21:37:16 +00:00
a183d34f04
- Implement cnbell() -- ring the console bell. The cn_bell entrypoint
...
is optional.
- Add cn_bell to statically allocated consdevs as appropriate.
2000-03-06 21:36:05 +00:00
57aae5ce02
On second thought, only set a default baudrate for "ethernet" if one
...
isn't set already.
2000-03-06 21:03:46 +00:00
91c44a72b8
Set ifp->if_baudrate as appropriate.
2000-03-06 21:02:37 +00:00
a6f861574a
No longer necessary to futz with ifp->if_baudrate here.
2000-03-06 21:02:00 +00:00
41aade98ba
Generate better error codes on bulk write.
2000-03-06 20:59:17 +00:00
119a2a3a80
Remove irrelevant comment.
2000-03-06 20:58:39 +00:00
e0cb11e30e
Use macros from usb.h instead masking out bit explicitely.
2000-03-06 20:58:18 +00:00
ad61d101be
Factor out the tick handling code into a common function, and send
...
rt_ifmsg's when the link speed or link status changes.
2000-03-06 20:56:56 +00:00
b99cf790df
- Initialize ifp->if_baudrate to a sensible value when the interface is
...
attached.
- Add ether_crc32_be() and ether_crc_le(), common functions for computing
the Ethernet CRC on arbitrary length buffers. Nothing uses them yet,
and these should be double-checked and probably re-implemented as
table-driven functions.
2000-03-06 20:54:41 +00:00
c2c2f491bc
Use the new macros in if.h for setting ifp->if_baudrate.
2000-03-06 20:52:12 +00:00
7e0978a583
Initialize ifp->if_baudrate to a sensible value when the interface is
...
attached. XXX Need to double-check this one.
2000-03-06 20:51:27 +00:00
877704d33e
Add ifmedia_baudrate(), which returns a value suitable for ifi_baudrate
...
given a media word, or 0 for unknown.
2000-03-06 20:50:29 +00:00
0f5c059d1f
- Add link status to if_data, so that routing daemons and other interested
...
parties can easily know the state of a link.
- Define an interface announcement message for the routing socket so that
routing daemons and other interested parties know when an interface
is attached/detached.
2000-03-06 20:49:00 +00:00
6a70fada85
allow SIOCDIFADDR with AF_UNSPEC address by default, until we fix ifconfig(8).
...
(should be COMPAT_43)
2000-03-06 19:33:13 +00:00
5d617390f9
Make pre-1.5 compatibility structures being defined conditional on _KERNEL
...
as well.
2000-03-06 18:55:10 +00:00
6ac3fc2a55
beautify APM_DISABLE_INTERRUPTS line (s/options\t/options \t/)
2000-03-06 18:45:42 +00:00
c34cce88c4
Add support for the AMD 756 DMA/UDMA IDE controller, provided in
...
PR kern/9536 by Dave Sainty.
2000-03-06 18:02:26 +00:00
5c2ef51018
Add '\Storage Card1\netbsd'.
2000-03-06 13:24:12 +00:00
68484a4ad9
- Remove redundant assignment.
...
- Don't disestablish shutdown hook if we can't establish it.
- Noneed to manage resouces individually.
2000-03-06 10:31:27 +00:00
9066b12bbb
Remove redundant assignment.
2000-03-06 10:21:46 +00:00
d2a30703b6
we don't have callrom(), so stop pretending otherwise. fixes PR
...
next68k/7257.
2000-03-06 04:14:15 +00:00
cab3766f0b
add comments to ZS_CONSOLE_ABORT and SERCONSOLE, and convert to
...
options<SPACE><TAB>NAME
2000-03-06 03:48:57 +00:00
d97becf28e
Make Creative Soundblaster PCI 128's work -- from Masahiro Ishiyama
...
Note that on device close, there's a sharp pop that probably should be fixed.
Note also that the device is hanging the machine at times for brief
periods inside audio.c::audiogetinfo(), but I haven't yet figured out
why.
2000-03-06 03:18:11 +00:00
60d1e515ef
Remove dead option POSTMORTEM.
2000-03-06 03:16:24 +00:00
9b9e4e5a8f
defopt EBSA285 and FOOTBRIDGE.
2000-03-06 03:15:46 +00:00
e87b3c7fb3
Use device_register() instead of dk_establish() to determine the boot
...
device. Works on a 3100 with both old and MI SCSI, on a 5000/25 built-in
IOASIC with both old and MI SCSI, on the 5000/25 PMAZ TC option card
with both old and MI SCSI, and with tftp boot on the 5000/25.
2000-03-06 03:15:28 +00:00
9ace38f7dc
Move the now emptry dk_establish() back to disksubr.c where it originally was.
2000-03-06 03:14:28 +00:00
7f9b4522d1
A common device_register() is used instead of a separate version for each
...
of the different DECstation models.
2000-03-06 03:11:43 +00:00
0993165c93
Define __HAVE_DEVICE_REGISTER, since pmax now has device_register().
2000-03-06 03:11:05 +00:00
e65044e30d
Get rid of hook for dk_establish() - pmax will now use device_register().
2000-03-06 03:08:32 +00:00
c74ea28746
Support the W89C940F alternative ID.
2000-03-06 03:07:08 +00:00
5ff4195532
Also use __HAVE_DEVICE_REGISTER for the device_register() prototype, rather
...
than a list of architecture defines.
2000-03-06 02:48:51 +00:00
9e870c5a88
Regenerate from pcidevs.
2000-03-06 02:32:31 +00:00
1a0eab6fa3
Add SYMPHONY 83C553 PCI-ISA bridge.
...
Add alternative ID for Winbond W89C940F.
2000-03-06 02:31:19 +00:00
4a8841ada2
Try to page align all segments up to 4MB pages.
2000-03-06 01:29:04 +00:00
4ab785a0e1
it is pretty close to working. the scsibus probes now.
2000-03-05 23:20:25 +00:00
c43bdd0b91
Fix a bug with < 1 pages mappings.
2000-03-05 21:51:47 +00:00
1de30b727b
fix bug in bus_space_subregion
2000-03-05 21:22:48 +00:00
23c5667cfe
Use ANSI-style function declarations for the various inline functions
...
here. Addresses port-alpha/9056.
2000-03-05 18:46:14 +00:00
84b24dcb3a
cosmetic change.
2000-03-05 10:03:16 +00:00
d610ec4cb0
Add Norwegian keymap from Haavard Lygre.
2000-03-05 08:56:53 +00:00
775240e015
Delete #ifdef USE_RASTERCONS lines, which are not used.
2000-03-05 08:49:06 +00:00
6bf88d7e9a
add a "struct device *booted_device" so that raidframe can link.
2000-03-05 08:21:57 +00:00
23af6e53fd
Moved things around a bit so that TGA2 can be used as a console.
...
Addresses PR: port-alpha/9542
2000-03-05 07:57:52 +00:00
45db29b1b3
Delete #ifdef USE_RASTERCONS lines, which are not used.
2000-03-05 06:24:33 +00:00
eb95b863d0
correct IPsec SA lookup, so that we can always get/use
...
proper SA. cached SA can be wrong, specifically when you use sendto().
sync with KAME change, From: Greg Troxel <gdt@ir.bbn.com>
2000-03-05 05:42:33 +00:00
303401ce32
Change bus_addr_t and bus_size_t from u_int32_t to u_long.
...
Add -Werror option to kernel Makefile.
2000-03-05 05:22:12 +00:00
2aad5afc67
Add ISA DMA support entries. (It's dummy. I don't know if it work or not.)
2000-03-05 04:34:06 +00:00
1dfdd10eae
I got the mode sense bits of the monitor wrong they needed a twiddle (~).
2000-03-05 02:30:57 +00:00
2569290833
Now that pnpbios_io_unmap() exists, use it.
2000-03-04 23:08:54 +00:00
8781f55d6a
Invert the APM_NO_POWER_PRINT flag, and make sure it's off by default.
2000-03-04 21:37:23 +00:00
062700843c
Make it easier to cross-compile with this. moreover.
2000-03-04 19:52:26 +00:00
937f50798e
adjust retry count for TX3922
2000-03-04 19:36:34 +00:00
06f8a39446
timeout when DMA interrupt lost.
2000-03-04 19:35:36 +00:00
4c75cb9b65
INSTALL kernel config.
2000-03-04 19:30:17 +00:00
2b3b8b5d50
it's closer to working now.
2000-03-04 18:20:53 +00:00
ad61c16f86
Oopps. forgot to commit this.
2000-03-04 16:59:18 +00:00
8e7bc4bd01
Change some install options. From Todd Whitesel.
2000-03-04 16:21:05 +00:00
3c7a7bf0e0
Install the boot programs in /usr/mdec also. From Todd Whitesel.
2000-03-04 16:17:46 +00:00
ac09284927
Change 'irq' locater encoding. You can use port# 0. You should use 0xff
...
for unspecified port#. Also, You can specify interrupt level/edge, high/low
and through/hold.
2000-03-04 13:43:19 +00:00
c98328e9df
Regen from "pcidevs".
2000-03-04 13:24:24 +00:00
947ec630de
Add AMD Athlon chipset related devices. Patch supplied by Dave Sainty in
...
PR kern/9533.
2000-03-04 13:23:26 +00:00
7cd55062c0
do as if bus_space_read_4() returned an int, although it just calls panic.
2000-03-04 11:49:18 +00:00
bac061b47f
sync with my latest.
2000-03-04 11:41:48 +00:00
461e3d82a4
adjust SIBSCLK to 9.216MHz (TX3922)
2000-03-04 11:39:29 +00:00
03bf9a2dc3
Remove #ifdef'ed out PMAX_CACHEFLUSH_FORCES_WBFLUSH codes in cache
...
flush ops which has had no effect for long time.
2000-03-04 11:37:31 +00:00
30370336dc
Use ring buffer on tx side, too.
2000-03-04 11:17:00 +00:00
f939818426
Added basic TGA2 support to the TGA driver. Abstracted the RAMDAC
...
code out into ../ic/bt485.c. Disabled tga_bt463.c, which we don't
currently support.
2000-03-04 10:27:59 +00:00
b16807c51a
Graphics card independant Bt485 code, derived from dev/pci/tga_bt485.c.
2000-03-04 10:25:57 +00:00
c4019af322
Definitions of standard TGA monitors as used by DEC.
2000-03-04 10:25:07 +00:00
7428bb6ffd
Definition of struct monitor, which contains syncs, and dot clocks.
2000-03-04 10:24:34 +00:00
fec44d6f55
Header for a generic RAMDAC that can be reused between different
...
graphics cards.
2000-03-04 10:23:39 +00:00
1036d33c39
Fix mipsmate SCSI lossage made by my previous change.
2000-03-04 10:14:39 +00:00
78609773fc
Allow PAGE_SIZE et al to be defined as constants instead of variables.
2000-03-04 08:41:59 +00:00
f58f6334cb
Cosmetic cleanups to hide local objects.
2000-03-04 08:25:24 +00:00
027952236a
Two changes to facilitate (better) PowerBook 1xx support:
...
- Use a mask to account for address space "wrapping"
- Check supervisor data space if we can't find a PTE in user data space
2000-03-04 08:16:16 +00:00
a5d6bd9c7a
Add get_pte_s() to search the supervisor space.
2000-03-04 08:10:51 +00:00
efc9b37ead
expunge vm_offset_t/vm_size_t
2000-03-04 07:28:44 +00:00
e0df4ffcae
expunge vm_offset_t and vm_size_t.
...
add bus_dma support for the vs4000 dma translation map (sgmap).
enhance the vsbus for the lance to work with it.
remove the sgmap init code from ka46/48/49.c
2000-03-04 07:27:47 +00:00
c9fc3f7c80
Mention a bit about possible HZ interporation improvement in microtime().
2000-03-04 07:09:09 +00:00
8098245d56
Mention a bit about various issues NetBSD/arc must solve.
2000-03-04 06:54:17 +00:00
4e461d33ef
Have a local variable to match/attach mainbus insteading using ->cf_unit.
2000-03-04 06:35:02 +00:00
ccacacf17c
Nuke unnecessary prototype declaration of readdisklabel().
2000-03-04 06:21:15 +00:00
076916eb49
Use cdev_decl() for cdev prototype declaration, fixing errors in the 4th
...
argument of mmopen() and mmclose().
2000-03-04 06:14:47 +00:00
13441f2429
It's not necessary to have #if NSII > 0.
2000-03-04 06:05:36 +00:00
1231bd6d14
Umm... don't allow attempts to configure the same RAID device multiple times.
...
The check was there, but the return() was missing :(
2000-03-04 06:03:21 +00:00
3b06f6f887
Fix boot device detection. Device probes are not done when adapters are
...
configured, but after all adapters have been configured. When multiple
adapters are present, only the last configured adapter could be matched
to the boot device slot. The adapter attach routines now check if that
adapter slot matches the boot device slot and saves the softc pointer
for that controller. Then when the disks are configured, dk_establish()
matches the appropriate controller.
2000-03-04 05:43:51 +00:00
8bf4d36694
Fix boot device detection. Device probes are not done when adapters are
...
configured, but after all adapters have been configured. When multiple
adapters are present, only the last configured adapter could be matched
to the boot device slot. The adapter attach routines now check if that
adapter slot matches the boot device slot and saves the softc pointer
for that controller. Then when the disks are configured, dk_establish()
matches the appropriate controller. Also change the rz boot device test
to include a check for the adapter so that it works when booting from a
disk on adapters other than the first one.
2000-03-04 05:42:55 +00:00
400fee7b5a
Remove never used memory error address register manipulation
...
inherited from DECstation 3100 and other debris floating around.
This file will go away naturally when interrupt establish procedure
and dispatcher are well coordinated in sane way of encapulating
target implementation differences.
2000-03-04 05:21:20 +00:00
0049933f0f
Reorganize some comments.
2000-03-04 04:22:34 +00:00
194aba4e41
Garbage collect the (already disabled) "random" queue type.
2000-03-04 03:27:13 +00:00
612e2e8f92
Nuke an unneeded #define.
2000-03-04 03:22:17 +00:00
308b6b91d5
Quiet a noisy diagnostic.
2000-03-04 02:39:58 +00:00
7258e6c6b7
First pass at NCR53c9x attachment for VS4000. It doesn't work yet.
...
But I want to save the work.
2000-03-04 00:24:06 +00:00
1bce76807d
it's a bit cleaner now. it also gets rid of the iomap init in
...
ka4[689].c
2000-03-04 00:22:37 +00:00
2150f75fb0
First pass. need to add hw sgmap allocation via bus_dmamem
2000-03-03 22:57:49 +00:00
d8bf2eb8ef
- we didn't write enable toe config1-3 registers before trying to set the
...
media.
- read out original settings to find out what the defaults (EEPROM) for this
board were, instad of hardwiring to auto.
XXX the first might need further refinement. At least on my boards, 10baseT
doesn't work for 10baseT, only AUTO.
2000-03-03 21:37:18 +00:00
630279a800
add device file interface for UCB1200
2000-03-03 19:54:34 +00:00
40b13c16c0
Do the Ultrix label check in readdisklabel() instead of in rz.c. Ultrix
...
disks are now usable with the MI SCSI sd devices.
The install mini-root adjustment and the default partitioning still needs
to be moved into readdisklabel().
2000-03-03 17:51:26 +00:00
9eaf0ad1d4
Allow a kernel (i.e. GENERIC) to be configured with rz disks with the SII
...
driver and sd disks with MI ASC driver.
2000-03-03 17:46:49 +00:00
be78177ba2
comment fix, sync with kame.
2000-03-03 17:42:14 +00:00
8e89a8db7e
cosmetic change
2000-03-03 17:09:57 +00:00
09a5eed1e8
NEC RISCstation 2250 (NEC-RD94) support.
...
contributed by Shuichiro URATA <ur@a-r.org>.
2000-03-03 13:08:42 +00:00
38441b4ae3
remove unnecessary ttl initialization which I mistakingly bringed in
...
during KAME merge (this is part of WIDE's expeirmental reass code...)
NetBSD PR: 9412
From: Wolfgang Rupprecht <wolfgang@wsrcc.com>
Fix from: ho@crt.se
itojun was notified from: theo
2000-03-03 13:07:42 +00:00
a031341f9b
NEC RISCstation 2250 (NEC-RD94) support.
...
contributed by Shuichiro URATA <ur@a-r.org>.
2000-03-03 12:50:19 +00:00
c616c9e0fe
use callback function to set up secondary cache related things on arc.
...
XXX - perhaps it is better to separate cache related initialization
from mips_vector_init().
2000-03-03 12:43:52 +00:00
d4b9359964
do not install bus.h, kbdreg.h and pio.h..
...
since currently these are not useful/needed from userland.
2000-03-03 12:38:25 +00:00
65102815b0
cosmetic change.
2000-03-03 12:35:40 +00:00
0ded8728bc
typo in comment
2000-03-03 12:32:43 +00:00
a39a58d0fb
update
2000-03-03 12:32:15 +00:00
0fd8c949e4
prepare for wscons
2000-03-03 12:31:33 +00:00
e47c4a5f51
add some MI devices, including raidframe, tun, ...
2000-03-03 12:29:57 +00:00
3c5d39d73b
Make clearer a bit how proc0's USPACE is intialized.
2000-03-03 08:36:20 +00:00
1d915f4130
Allow my disk to actually spin down using `-o async' again.
...
Note: This uses the same questionable logic as vfs_bio.c to check MNT_ASYNC.
Something needs to be done about this.
2000-03-03 05:21:03 +00:00
88a8d06a0b
Use the common disk allocation code, rather doing things the old way.
2000-03-03 03:47:17 +00:00
142175b1a1
Minor formatting cleanup.
2000-03-03 03:10:03 +00:00
67e96268ad
Fix a /dev/kmem crash when vaddr + count wrapped and snuck through
...
the error check, courtesy of Jeff Smith <jeffs@geocast.com>.
2000-03-03 02:33:21 +00:00
7b1139520e
More minor cleanup.
2000-03-03 02:04:48 +00:00
87f46374bb
Minor cleanup. No functional changes.
2000-03-03 01:46:36 +00:00
2dda67d4a2
Fix typo in argument to ratecheck().
2000-03-02 15:49:29 +00:00
d6c4ac7ff2
Use ratecheck() to limit error messages on disconnect.
...
Break out some common functionality.
2000-03-02 12:37:50 +00:00
e924f6f853
Minor cleanups.
2000-03-02 10:29:22 +00:00
d7e8edfdcd
configure ::1 to loopback dstaddr.
...
honor ifa_refcnt when configuring loopback.
2000-03-02 09:45:01 +00:00
2dc247fc34
make CMSG_ALIGN always synchronize with kernel's idea of ALIGNBYTES.
...
ancillary data alignment will be ALIGNBYTES, not sizeof(long) - 1, from now.
CMSG_xx will NOT resolve into constant. if you use CMSG_xx to allocate
arrays, you'll lose.
bump shlib minor for libc.
NOTE: if you are on top of arch with ALIGNBYTES != sizeof(long) - 1,
you need to recompile IPv6-related binaries. there is no way to guarantee
backward compat in this aspect. sorry for this. this should be the last
backward compat breakage for IPv6-related ancillary data manipulation.
(we still have PR 9516 for unix-domain sockets...)
2000-03-02 07:41:49 +00:00
52c11b789a
bump kame revision id
2000-03-02 07:15:39 +00:00
36649fea92
don't configure ifa_dstaddr for non-pointopoint interface,
...
so that we won't be returning them from routing socket manipulation.
2000-03-02 07:14:52 +00:00
ded4e9540a
properly handle notifies from icmp6, so that we can properly reflect
...
redirects/unreach to transport layer. (sync with latest kame)
2000-03-02 06:42:52 +00:00
754bba7b6c
Avoid a bug in GCC which manifests itself when processing unaligned
...
IP options. Problem pointed out by Matt Hargett and Erik Fair, analyzed
by me.
2000-03-02 06:07:36 +00:00
48721f291a
Fix typo and thinko in previous commit.
2000-03-02 05:54:22 +00:00
027db8bf87
Add ifmedia support so that dhcp happy. Also, add nwid support.
2000-03-02 05:00:47 +00:00
a5921b902e
Check if device is active in the interrupt handler and the one second
...
tick handler.
2000-03-02 01:21:56 +00:00
285a315e99
Simplify the winlist code.
2000-03-01 23:40:26 +00:00
ac1b683642
Amend previous; pay attention to EX_CONF_MII on deactivate, too.
2000-03-01 20:53:11 +00:00
448dfa4249
Only detach PHYs if we have MII in the first place, and remove a bunch
...
of #if 0'd code which was copied from the Tulip driver.
2000-03-01 20:51:50 +00:00
54e0e80815
Cosmetic change.
2000-03-01 20:50:56 +00:00
08483fcddc
When unmapping these on detach, pass the BAR to unmap (not the type of
...
the BAR!!)
2000-03-01 20:50:37 +00:00
97be07a6c4
Remove probe/attach for PNP0C02. There are reserved motherboard regions.
...
Thanks to Adam Glass for catching this.
2000-03-01 20:24:53 +00:00
866ee72838
Add pnpbios_io_unmap
2000-03-01 20:23:55 +00:00
3218dd992d
Protect the use of bpf_mtap so bpf isn't needed.
...
aue: Limit the number of error messages at disconnect by using ratecheck().
2000-03-01 19:00:51 +00:00
7d57276982
Do partial lazy I-stream sync -- in the pmap_enter()/pmap_remove() cases
...
for now. More to come.
2000-03-01 18:29:04 +00:00
8f2f22b47c
increase kernel version to 1.4U (5 more to 1.4Z!)
2000-03-01 12:52:11 +00:00
04ac848d6f
introduce m->m_pkthdr.aux to hold random data which needs to be passed
...
between protocol handlers.
ipsec socket pointers, ipsec decryption/auth information, tunnel
decapsulation information are in my mind - there can be several other usage.
at this moment, we use this for ipsec socket pointer passing. this will
avoid reuse of m->m_pkthdr.rcvif in ipsec code.
due to the change, MHLEN will be decreased by sizeof(void *) - for example,
for i386, MHLEN was 100 bytes, but is now 96 bytes.
we may want to increase MSIZE from 128 to 256 for some of our architectures.
take caution if you use it for keeping some data item for long period
of time - use extra caution on M_PREPEND() or m_adj(), as they may result
in loss of m->m_pkthdr.aux pointer (and mbuf leak).
this will bump kernel version.
(as discussed in tech-net, tested in kame tree)
2000-03-01 12:49:27 +00:00
13d92f98ce
Remove unnecessary asterisk in comment (probably it was comment leader of
...
multiline comment).
2000-03-01 03:51:29 +00:00
543db3a000
Cosmetic changes.
2000-03-01 03:50:04 +00:00
908f6bc4cd
Infrastructure for lazy istream sync in the pmap module:
...
- Add a bitmask for the CPUs which need an isync before this pmap returns
to userspace on that CPU.
- Define PMAP_USERRET(), a utility macro for userret() to use to process
the deferred isync, and call it as appropriate in userret().
2000-03-01 02:22:03 +00:00
a192dc9c5b
PMAP_ISACTIVE() now takes the cpu_id. This serves two purposes:
...
- Everywhere it was used, the cpu_id was already computed, so this
saves computing it again.
- This will be needed for lazy istream sync.
2000-03-01 01:32:45 +00:00
14050f197e
Make this compile in DEBUG/DIAGNOSTIC case.
2000-03-01 00:44:53 +00:00
ba4e755a9c
Change the cmd argument in {audio,mixer}_ioctl() to u_long.
2000-03-01 00:44:35 +00:00
64911f1d2e
Use cpu_number() here instead of alpha_pal_whami().
2000-03-01 00:43:34 +00:00
a1a05c5cf9
include <sys/cdefs.h> since <net/netisr_dispatch.h> needs __CONCAT
2000-03-01 00:17:17 +00:00
fac7fc369f
Put machine check info in cpu_info in the multiprocessor case, and
...
just have one statically allocate machine check info structure in the
single processor config case.
2000-02-29 22:19:53 +00:00
04d9239b1e
Reset mc_received after we've done a badaddr probe.
2000-02-29 21:42:54 +00:00
7d05674ba7
Distinguish between device and interface classes.
...
(I finally found a document that said that they were different.)
2000-02-29 21:37:00 +00:00
c47506aed1
more fix to ancillary data alignment. we need padding after
...
last cmsg_data item (see the figure on RFC2292 page 18).
2000-02-29 19:14:59 +00:00
8cc92d88cf
Add USB tty device.
2000-02-29 19:08:54 +00:00
a6a5be8ccf
This driver also handles the 3COM 3COM HomeConnect Ethernet USB Adapter
...
(3C460), rev 1.00/2.05
2000-02-29 19:08:09 +00:00
b95fbdaeb7
Regen
2000-02-29 19:07:33 +00:00
eff003f7ce
add product ID for 3COM 3COM HomeConnect Ethernet USB Adapter (3C460),
...
rev 1.00/2.05
2000-02-29 19:06:40 +00:00
352a87f7bd
fix a too agressive s/CIA/UBA/ (e.g change SPEUBAL back to SPECIAL) in the
...
header.
2000-02-29 17:42:32 +00:00
8aaab5c387
add missing cpu dependencies
2000-02-29 17:13:27 +00:00
8cde772948
Oops.. Need to note the parity status when we unconfigure.
...
Noted by Aaron J. Grier. (Thanks!)
2000-02-29 16:54:29 +00:00
5c1b7efe97
avoid copy-overwrite-copy on incoming udp4 checksum. use in4_cksum
...
which takes care of pseudo header checksum without overwrites.
2000-02-29 16:21:56 +00:00
37eb9eebc2
Initial import prep port.
2000-02-29 15:21:20 +00:00
c09a9a072f
Oops, pasto.
2000-02-29 11:14:46 +00:00
6f5dadba1c
Cleanup warning comment which is now irrelevant. Reorder codes.
2000-02-29 09:03:30 +00:00
d93aaefb84
- Have SYS_DEV_xxx device cookie symbols to select and install proper
...
interrupt handlers into intrtab[] array, rather than the idea of devices
in 'psuedo' TURBOchannel slots.
- Nuke symbols for psuedo TC slots.
- Abandon never/unlikely used intr_disestablish()s.
2000-02-29 07:20:21 +00:00
4eb55e447c
Do the "<space><tab>" thing with the RAID_AUTOCONFIG option.
2000-02-29 06:32:20 +00:00
82ab98145f
ensure tcp window size does not overflow (16bit unsigned after window scale).
...
FreeBSD PR: 16914
2000-02-29 05:25:49 +00:00
a6e403e50b
Remove unnecessary cast for kernend variable when grabbing proc0 USPACE.
2000-02-29 04:55:54 +00:00
7eeaa2a1fa
NLE_PMAX symbol in le_pmax.h has gone.
2000-02-29 04:44:29 +00:00
582e9de235
- Have SYS_DEV_xxx device cookie symbols to select and install proper
...
interrupt handlers into intrtab[] array, rather than the idea of devices
in 'psuedo' TURBOchannel slots.
- Nuke symbols for psuedo TC slots.
- Abandon never/unlikely used intr_disestablish()s.
2000-02-29 04:41:47 +00:00
19c22771f3
Check and clear the appropriate IOASIC SCSI interrupt bits when in polled
...
I/O mode. Kernel dumps will now work with the IOASIC SCSI devices.
2000-02-28 18:51:25 +00:00
d788e0dbad
Make sure to initialize xs->req_sense_length (to 0). This appears to be
...
a historical leftover, and very few drivers actually look at it. But the
PCI `ncr' driver does, and if this field is not initialized to its default
value, that driver will fall over flat on its face when it attempts to get
sense data from a target.
2000-02-28 17:44:20 +00:00
03f0ac370f
make ICMPv6 redirect actually flush route cache in udp6/raw6 socket.
2000-02-28 16:10:52 +00:00
sato