1e1f1f3b3b
Make sure the USB event thread discovers all devices first time it call
...
usb_discover().
It should now be possible to have the root NFS mounted over a USB Ethernet
adapter.
2000-03-14 23:13:12 +00:00
072f9f5b69
Some whitespace changes.
2000-03-14 22:37:55 +00:00
e8a33a63d1
Add port power management ioctls.
2000-03-14 21:24:54 +00:00
48ba774212
Fix RCS ID.
...
Add port power management.
2000-03-14 21:23:45 +00:00
797ac20035
Add power management hooks.
2000-03-14 21:20:51 +00:00
fa4417ef0c
Add enable/disable and power management hooks for serial ports.
...
Port states : always on / on when open (default) / always off
2000-03-14 21:18:27 +00:00
e2a9e82243
Add a descriptive comment to previous.
2000-03-14 19:16:03 +00:00
1bad2e1909
Add the RAIDframe device major to the machine-dependent config files
...
so that the right entries get added to dev_name2blk[]. Needed for / on RAID.
(Whoops! I missed checking these in when adding the RAID_AUTOCONFIG stuff.)
2000-03-14 15:56:51 +00:00
667929def5
KNF comment.
2000-03-14 14:11:06 +00:00
9ec86df3dd
Fix typo.
2000-03-14 14:10:08 +00:00
eb9d73ce81
Actually use KSEG1 offset for KSEG1 addresses in kvtophys().
...
From Jeff Smith and Ethan Solomita at Geocast.
2000-03-14 14:08:55 +00:00
563d336e44
Don't immediately return in ffs_fsync if there appears to be no data
...
to flush if it's a vnode on a softdep filesystem. softdep_sync_metadata
may still need to do some work.
2000-03-14 13:06:29 +00:00
60ed7cfb2b
Simplify the code a bit.
2000-03-14 10:26:10 +00:00
70b8e188ee
Don't think that a card is inserted if there is a card already in the slot.
...
Note that powerdown hook calls pccbbintr so that it detect card insertion or
removal during suspension.
2000-03-14 10:23:16 +00:00
d454505125
Cosmetic change.
2000-03-14 10:20:09 +00:00
0a00ace3f7
some buttuns map to key codes which the button mean.
2000-03-14 08:37:31 +00:00
6219354e8c
sync with fb->hpcfb, btnmgr changes.
2000-03-14 08:31:07 +00:00
16d7136b4c
change about debug print.
...
CVS
2000-03-14 08:26:42 +00:00
65da099cb1
Unnecessary to enclose device driver body with #if NASC > 0.
2000-03-14 08:23:29 +00:00
b76ec51696
- toggle CONFIG_HOOK_BUTTONEVENT_POWER event.
...
- change about debug print.
2000-03-14 08:23:24 +00:00
2eb68c00d2
Respect video console colour designation by configration file.
2000-03-14 08:04:06 +00:00
80c0893a8b
Switch to improved flexible video console text rasterizer provided by
...
rasops and wsfont.
2000-03-14 06:25:21 +00:00
8bf44847a8
Fix DEC3000/300 TC slot numbering. There is an address space hole
...
between two TC option cards and 3 builtin TC devices. Was uncovered by
mrg's change made at Nov 1999 and pointed by tsutsui.
2000-03-14 05:53:33 +00:00
6f5486c425
Switch to MI sfb (PMAGB-B) TC framebuffer driver which sports faster
...
text rendering assisted by SFB ASIC.
2000-03-14 05:34:04 +00:00
8de02d3a76
- Comment out cfb (PMAG-B) 1024x768 framebuffer.
...
- Have Gallant19 font by default.
2000-03-14 05:31:16 +00:00
ae493d8845
Resolve LP64 issues.
2000-03-14 04:23:14 +00:00
b3a2990ce5
Redo the previous commit; duplicated lines.
2000-03-14 02:55:04 +00:00
38ed3db66f
Synchronize with recent progress of GENERIC.
2000-03-14 02:53:04 +00:00
297455cbe2
Pick I/O before Memory space.
2000-03-14 02:08:21 +00:00
e58bd0c365
Regen
2000-03-14 01:46:56 +00:00
67027b1103
Add product ids for some VIA Technologies VT82C686A southbridge devices.
2000-03-14 01:45:11 +00:00
b3cf850817
Fix typos in comments.
2000-03-14 01:29:30 +00:00
735236ed02
Fix doubled 'the the' in comment.
2000-03-14 00:04:19 +00:00
95054da1a1
Fix doubled 'the's in comments.
2000-03-13 23:52:25 +00:00
49389b9817
tabbing consistency on the 3c1 entry
2000-03-13 23:36:02 +00:00
e2850da406
Regen.
2000-03-13 21:17:32 +00:00
ce56ba78b7
Make the inline asm conform to what gcc thinks they should look like (per
...
discussions in http://gcc.gnu.org/ml/gcc-patches/1998-11/msg00004.html )
Approved by fvdl.
2000-03-13 21:10:24 +00:00
5402c76d3e
add an entry to the product table for the 3C1. This seems to work,
...
at least as necessary to pull out the MAC address, etc. Not actually
tested xmit & rcv yet.
2000-03-13 20:32:28 +00:00
8409d84d62
regen
2000-03-13 20:31:23 +00:00
00a2570a2e
Add 3com Megahertz 3C1 10Mbps LAN CF+ Card
2000-03-13 20:30:24 +00:00
52b9123e1a
note lacking sysinst support
2000-03-13 19:00:28 +00:00
9616fd8002
no longer required.
2000-03-13 18:56:40 +00:00
70a3b602bd
add MOUNT_NTFS to CTL_VFS_NAMES macro
2000-03-13 18:52:06 +00:00
00363a82c8
sync with hpcfb.
2000-03-13 18:49:15 +00:00
f91ce51084
Regen.
2000-03-13 17:24:14 +00:00
e22c4b3d1f
Add a bunch of Compaq array controllers.
2000-03-13 17:23:26 +00:00
9f0c40cff1
Add Palm serial adapter.
2000-03-13 17:14:27 +00:00
97970bb544
Reduce memory disk size and remove some options.
2000-03-13 12:58:58 +00:00
8ba340d655
Do the same as biosboot does.
...
This makes it possible to create serial console dosboot.com's via uncommenting
the appropriate Makefile options.
I needed this when testing the SMP test kernels at work.
2000-03-13 10:51:22 +00:00
112137cd30
Added Artec/Ultima A6000C scanner to the quirks table (no LUNs).
2000-03-13 09:56:26 +00:00
c9af54bf14
Add SIOCGDRVSPEC to get driver specific parameters in addition to the
...
current definition of SIOCSDRVSPEC.
2000-03-13 05:56:47 +00:00
b27007be2c
Make dependall work.
2000-03-13 03:25:20 +00:00
54dab7a0d1
add BTN_COVER for MC-R520.
2000-03-13 01:57:06 +00:00
fd697ef8aa
add PWCTL_LCDLIGHT for MC-R300
2000-03-13 01:54:39 +00:00
f9dc1cca42
add CONFIG_HOOK_POWERCONTROL_LCDLIGHT
2000-03-13 01:52:00 +00:00
035f58c823
HPC/PsPC keyboard types.
2000-03-13 01:46:44 +00:00
a7f01b4816
Fix DMAADDR():
...
Return the mapped address of the block, not the kernel address.
A uhci device now finds devices on my pc164.
2000-03-12 23:10:29 +00:00
b8b53d87db
Avoid accessing the device if it is dying.
2000-03-12 21:57:50 +00:00
ce6f0100c1
Remove extra \n in attach message.
2000-03-12 19:16:48 +00:00
347a1f736e
Reverse the mapping of the control/status registers. Use I/O before MEM.
...
My card works now on a TI1220 chipset. Approved by Jason.
2000-03-12 17:05:23 +00:00
a57fa19957
change debug message.
2000-03-12 15:42:43 +00:00
44b86d33d6
recognize UCB1100 id.
2000-03-12 15:36:11 +00:00
ba8565be98
add WINCE_DEFAULT_SETTING and IT8368E_DESTRUCTIVE_CHECK for debug.
2000-03-12 15:35:29 +00:00
6c57f806b1
sync with btnmgr change.
2000-03-12 15:28:12 +00:00
dc7c050b3b
Add wsmux device which is real device in /dev.
2000-03-12 13:46:27 +00:00
b0650cbf17
Change btnmgr to wskbd device from pseudo device.
2000-03-12 12:08:16 +00:00
dcec402dc9
initialize rn with 0, just to be sure
2000-03-12 11:58:15 +00:00
2996ac1c02
Bivideo utilize platid mechanisum for probing.
2000-03-12 11:46:44 +00:00
e750135b5e
A few things:
...
* Initialize PCIC_INTR and PCIC_CSC_INTR on all chips, not just TI.
* Leave card detect interrupts enabled in PCIC_CSC_INTR. (This requires
reading PCIC_CSC in the interrupt handler on some chips, so do that too.)
* Leave PCIC_INTR_ENABLE set, as some chips require this to post card detect
interrupts while in PCMCIA mode.
* Leave PCIC_INTR_RESET (which is inverted) set at all times *except* when
powering up a socket, as some chips will use it to drive RESET# low even
while a CardBus card is in the slot.
This makes PCMCIA and CardBus cards works with some TI chips. Cross-checked
with a Toshiba ToPIC 95B.
2000-03-12 11:31:53 +00:00
30f73f1831
support bus probes a la "badaddr" and VME interrupts, fix error handling
...
after mapping problems
2000-03-12 11:23:06 +00:00
e135f943fa
add support for DMA mapping, bus probes ala "badaddr" and VME interrupts,
...
improve diagnostic output
2000-03-12 11:21:02 +00:00
c12028016f
Add makefile to install hpcfb.h.
2000-03-12 06:40:16 +00:00
f6ec059d2e
add newline at end of last line.
2000-03-12 05:35:37 +00:00
1203bdcbb3
Bus_space-ify TGA register accesses.
...
(raster operations are still using pointer-based access)
2000-03-12 05:32:29 +00:00
7560717e93
undo interface addition attempt if in6_ifinit() fails.
...
without it, :: will be kept if in6_ifinit() fails.
2000-03-12 05:23:07 +00:00
e9619d5d21
New frame buffer driver 'hpcfb' and built in video controller 'bivideo'
2000-03-12 05:04:44 +00:00
9f8cac1f16
undo interface address addition attempt, when in_ifinit fails.
...
(this basically avoids memory leakage)
2000-03-12 05:01:16 +00:00
058d87a788
Add a new frame buffer identifier for the hpcmips.
2000-03-12 04:59:24 +00:00
602faa83a8
Do *not* fiddle with the serial/parallel IRQ mode selection on TI chips.
...
Without extensive probing, we cannot possibly know that we're doing the right
thing.
Also some stylistic changes.
2000-03-12 04:34:29 +00:00
781b535703
Revert the previous change.
2000-03-12 04:27:12 +00:00
c7a13f6116
Revert the previous change. It does not match the commit message *and* was
...
incomplete (and probably quite broken).
2000-03-12 04:25:57 +00:00
31a775880b
lfs_truncate: handle synlinks with length > maxsymlink_len as regular files.
...
For symlinks > 60 chars we were bzero'ing part of (struct inode) past the
actual inode struct, corrupting memory following the current (struct inode)
resuling in a 'panic: pool_get(lfsinopl): free list modified' later.
This could also be the cause of random panics. With this fix LFS seems to be
useable for me now.
2000-03-12 01:45:01 +00:00
5c64f2064d
Add missing sc_pil_intr_enable member to pccbb_softc.
...
XXX Double check this, please. The code appears to only use it as a
boolean, but...
2000-03-12 01:15:04 +00:00
27fe6c0aee
regen
2000-03-11 16:13:39 +00:00
d01b78affd
Add id for Alliance AT25, as sent by Dave Sainty in kern/9596.
2000-03-11 16:13:14 +00:00
53cff1c1e5
fix typo.
2000-03-11 09:11:33 +00:00
531586bc96
fix frame buffer type (normalized to 'black on white').
2000-03-11 09:05:17 +00:00
a56d95d08b
fix PV-6000/C-1000 keycode mapping.
2000-03-11 08:53:33 +00:00
b7a1ee6c84
configure controller 0 only (workaround for phantom PCIC).
2000-03-11 08:51:55 +00:00
2d525b16dd
The shortened 1371 reset delay in revision 1.32 doesn't seem to be
...
quite enough for my 1373, so increase it some.
2000-03-11 06:42:37 +00:00
61fa9e1409
Move vinvalbuf's check for dirty blocks into ffs_fsync, to ensure that
...
mode and ownership bits are flushed to disk before the vnode is
reclaimed.
The check, introduced in the softdep merge, assumes that if no blocks
are dirty, no file data *or metadata* needs to be flushed to disk. This
is true of ffs, but is not true of lfs, and may not be true of other
filesystems.
Tested by myself and Bill Squier <groo@cs.stevens-tech.edu>.
2000-03-11 05:00:18 +00:00
0fcf68825f
Back out previous, and adjust a comment.
2000-03-10 22:39:03 +00:00
b58bf3c7bb
Don't reset cp->hw_ok ro 0 when cp isn't initialised in cy693_chip_map()
...
(used only in failure case). Pointed out by Wolfgang Solfrank.
While I'm here correct indentation.
2000-03-10 21:21:48 +00:00
dc259a36a2
Use CTRL_AST interrupt to handle asynchronous trap.
2000-03-10 19:06:43 +00:00
37132adf3f
Sync. with news68k/news68k/mem.c:1.2.
2000-03-10 16:28:56 +00:00
673e8e6fad
move IPPROTO_DONE to IPPROTO_xx group
2000-03-10 15:30:55 +00:00
8937ddef33
do not touch radix_node with RNF_ROOT on route_output(). this can
...
cause kernel panic (by non-root invocation of route(8)) on certain
routing table setup.
KAME PR: 217
2000-03-10 14:47:12 +00:00
fc34e21eac
Add an EILSEQ code (C99, first appeared in C90/AMD1), and update message
...
catalogs where possible.
2000-03-10 13:58:59 +00:00
173f823e3a
Only apply power on 3.3 V CardBus card (there are no 5 V CardBus card.)
2000-03-10 11:08:49 +00:00
06f85d40f0
change about VRIPDEBUG. no action changes.
2000-03-10 09:18:00 +00:00
67e7cb40b1
fix print message when #undef VRGIUDEBUG and change a little.
2000-03-10 09:05:01 +00:00
7e044bd4e5
Move pretty much all of the PCI configuration goo into a separate
...
function.
2000-03-10 07:26:41 +00:00
370bc1832b
Normalize the copyright notice (TNF copyrights should *always* match
...
the appropriate template), and run through indent.
2000-03-10 07:11:47 +00:00
0fef451485
Pull the code that take the Tulip out of powersave mode into a separate
...
function.
2000-03-10 06:55:09 +00:00
f76ce3b475
Only poll for bell completion if we're calling in from cnbell(). Fixes
...
a problem reported by Lennart Augustsson.
2000-03-10 06:10:34 +00:00
0a77d41f4f
clean up lm0 example
2000-03-10 06:03:18 +00:00
cf32e2713c
Adopt the macro name change of if_ieee80211.h.
...
also fixed the value for receiving packets in infrastructure mode,
while no one has been tested with.
2000-03-10 05:47:42 +00:00
85656424da
Rename the macro IEEE80211_FC1_RCVFROM_XXX to IEEE80211_FC1_DIR_XXX
...
and fix the value to be consistent with IEEE 802.11 spec.
The only customer of this macro is if_ray driver for now.
2000-03-10 05:44:23 +00:00
0391e3393f
Slight change to the SROM size printf.
2000-03-10 02:46:39 +00:00
4c043eb094
Arrange 'vmstat -i' to show 'optslotN'; for interrupt counts of TC slot N
...
as well as DECsystem 5100 optional serial card slot N.
2000-03-10 01:31:22 +00:00
79d83d72e1
printf -> DPRINTF
...
vrisa_debug = 0 by default.
2000-03-10 01:30:06 +00:00
01a5f6c995
Create new kernel thread to issue statfs(2) system call to check free
...
disk space rather than doing it in timeout handler. This fixes long
standing bug that accounting file can't be put on NFS file system (so,
e.g, we couldn't turn on accounting on diskless system).
2000-03-10 01:13:18 +00:00
9f86839658
change Mb/s to MB/s (Megabit to megabyte).
2000-03-09 23:19:26 +00:00
87bf486935
Back out previous; it's now dead code.
2000-03-09 23:15:23 +00:00
0aaf8765ad
Add reminder to add stuff to ALPHA as well as this.
2000-03-09 22:27:26 +00:00
d5f475149c
The last change has proven unreliable. Attack the problem differently;
...
assume that the address we have is the correct PA if we can't
figure it out by groveling. This time it really (yes, really)
works on the PowerBook 14x/16x/170.
2000-03-09 22:27:09 +00:00
fe76319160
Add ident and RAID_AUTOCONFIG to bring up to date with GENERIC.
2000-03-09 22:26:41 +00:00
402493dee5
change member name for icmp6_filter, to be conformant to RFC2292.
...
From: Francis Dupont
2000-03-09 21:26:16 +00:00
c70220f2a2
Move PCIIDE_CHANNEL_NAME macro to pciidereg.h.
2000-03-09 20:26:31 +00:00
0bcbafe0ee
Correct the number of arguments to wsdisplay_set_cons_kbd(), for the
...
changes I made for cnbell().
2000-03-09 18:59:27 +00:00
0542cec055
put "#ifdef __alpha__" around "alpha_mb()" calls
...
(I know the driver is useless without console initialisation, but it
should at least compile.)
2000-03-09 18:40:36 +00:00
f3f4e44c39
fix typo
2000-03-09 16:49:22 +00:00
5af90382c5
Add missing chrtoblktbl entry.
2000-03-09 11:19:30 +00:00
24ea2caf14
regen
2000-03-09 09:53:03 +00:00
3abb87c0f5
Add Conexant SoftK56 PCI Software Modem, Sony CXD3222 OHCI i.LINK(IEEE 1394)
...
PCI controller, Sony Memory Stick I/F Controller
Ids send by John Hawkinson in kern/9588
2000-03-09 09:50:49 +00:00
ea089cf90c
New features:
...
tctrl now initializes the state of the internal LCD icons. The icons
are unprogrammed at boot time. This incidentally makes the DC-POWER icon
work.
Fixes:
Fix my stupidity in the ENVSYS stuff, and actually follow the API.
2000-03-09 07:04:08 +00:00
7e567738f2
support rfact. use manufac. suggested resistor values by default
...
clean up some comments
2000-03-09 04:20:58 +00:00
7e6d7b8613
use bus independent probe
2000-03-09 04:19:03 +00:00
ed0b72db8f
Add rfact multiplication factor for DC voltage sources
...
Clean up formatting (fit in 80 columns)
2000-03-09 04:13:58 +00:00
752c98f8ea
Add (commented out) lm driver examples
2000-03-09 04:12:42 +00:00
ebe08edbb2
add VS400 scsi attachment + a few other things
2000-03-09 02:05:07 +00:00
57032be837
disable scsi for ka49 until sgmap is adapted to it.
2000-03-09 02:02:12 +00:00
082a04f053
don't enable sgmap on ka49 yet.
2000-03-08 23:50:51 +00:00
f21e750db2
only have vmapbuf/vunmapbuf do anything on the ka46/48/49.
2000-03-08 23:49:10 +00:00
5a9b9df419
Do the interrupt dispatch somewhat differently than the previous fix.
...
This one is more in the spirit of incorrect version which was trying
to shorten the interrupt path. This probably isn't quite as fast as
using a switch() statement to dispatch the interrupts, but should be
a little faster than testing for each of the possible 6 interrupt
conditions.
2000-03-08 18:09:27 +00:00
e0d3ede01c
Get the status right when a polled transfer times out.
2000-03-08 15:34:10 +00:00
07574c3239
Add a debug message.
2000-03-08 15:33:38 +00:00
45f32a77f5
Clean up code a little and add some more debug messages.
2000-03-08 15:33:24 +00:00
fe02fcfe1e
GENERIC configration includes Cassiopeia E-55 CF card support.
2000-03-08 14:53:33 +00:00
b1e34812e4
Fix obvious off-by-one error in db_output().
...
Fixes kern/9570 by John Hawkinson.
2000-03-08 08:31:33 +00:00
0641e677c4
Using interrupt bits in a switch statement doesn't work very well if more
...
than one interrupt bit is set (unless you do some fancy case values).
Check each interrupt bit individually and process the interrupt if set.
5000/200 doesn't hang shortly after booting now.
2000-03-07 23:41:35 +00:00
ad7dbd825c
Define ISO C99 (unsigned) long long (min, max) symbols.
2000-03-07 19:33:00 +00:00
0c7df56c40
Define ISO C99 (unsigned) long long (min, max) symbols.
...
VS: ----------------------------------------------------------------------
2000-03-07 19:31:50 +00:00
a9ebf7bb8c
Define ISO C99 (unsigned) long long (min, max) symbols.
2000-03-07 19:31:49 +00:00
af00b7b880
split probe into generic and bus specific
2000-03-07 18:39:14 +00:00
56423f59aa
Use b_cylinder as defined in sys/buf.h.
2000-03-07 15:59:24 +00:00
d16c6f3272
Use DISKPART/DISKMINOR/DISKUNIT instead of dkpart/dkminor/dkunit.
2000-03-07 15:55:14 +00:00
d9d840d522
- Remove unnecessary prototype declaration of readdisklabel().
...
- Use DISKPART/DISKMINOR/DISKUNIT instead of dkpart/dkminor/dkunit.
2000-03-07 15:35:42 +00:00
4398e0bd07
Fix CardBus device number. Though CardBus device number should be 0,
...
the value of bridge's function number was assigned to the device
number.
2000-03-07 09:36:52 +00:00
6755970bcf
Low-level drivers, like the Power Manager driver, can get us into a major
...
funk when they misbehave and give us unexpected results. Specifically:
- Don't assume that the first free slot is at the top of the table if
we can't find one.
- Don't increment ADBNumDevices when backfilling "holes" left by devices
that didn't respond to a TALK R3 during the initial device scan.
- Don't assume that an address reassignment worked; make sure something
responds on the new address before plowing forward.
- If after device reassignment there are no free slots, make sure to
indicate this fact.
- Failing all else, handle the situation where we run out of slots in
the device table -- which now should "never" happen -- gracefully.
While the Power Manager driver still sometimes misbehaves, it shouldn't
cause the system to crash/hang due to us walking off the end of the
device table.
2000-03-07 06:35:22 +00:00
augustss