890fa9e9be
Regen from "GENERIC".
1999-05-01 10:21:22 +00:00
3420cb646c
Add ext2 filesystem.
1999-05-01 10:20:01 +00:00
009cda3fb2
Fix a problem with bounds_check_with_label(), noted by Greg Oster: we
...
had been returning (-1) as an error instead of 0. This is the result of
not keeping up with its i386 ancestor, which it was originally derived
from back in 1993. Re-sync.
1999-05-01 09:26:32 +00:00
9e69eadd92
Rewrite read_mac_label() and friends, simplifying the code considerably
...
in the process. Less is truly More.
1999-05-01 09:12:47 +00:00
a0a7b0de30
protection-related bits -> osf1_prot.c
1999-05-01 05:49:01 +00:00
ca7738a519
clean up ordering, add a comment or two
1999-05-01 05:43:52 +00:00
12df8bf0da
{get,set}rlimit, getrusage -> osf1_resource.c
1999-05-01 05:41:56 +00:00
8d9e0684d2
descriptor-frobbing syscalls (fstat, fcntl(), lseek(), etc.) ->
...
osf1_descrip.c.
1999-05-01 05:34:59 +00:00
39ba96ee96
utimes() belongs here
1999-05-01 05:33:36 +00:00
789e810c20
get/settimeofday, interval timers -> osf1_time.c
1999-05-01 05:25:37 +00:00
bf9d06e035
typical filename using syscalls (open(), access(), execve(), etc.) -> osf1_file.c
1999-05-01 05:18:01 +00:00
deeb289def
sys_generic-ish bits move to osf1_generic.c
1999-05-01 05:06:46 +00:00
f493e92106
clean up vm-related headers
1999-05-01 04:59:42 +00:00
d3b6da7da3
and the socket calls move
1999-05-01 04:57:15 +00:00
ffc61cf092
shuffle some conversion bits around that were missed earlier
1999-05-01 04:47:00 +00:00
9cc30ed036
needs mount.h
1999-05-01 04:38:39 +00:00
2d25ceb2d2
pull in compat_util.h
1999-05-01 04:38:20 +00:00
e42f7d331f
move mmap() and related functions into their own file
1999-05-01 04:34:20 +00:00
170b003d0b
shuffle bits around. separate conversion conversion functions and tables
...
from the code that uses them, just as I previously separated out the
OSF/1 definitions and structures from the code that translates to and
from them.
1999-05-01 02:57:08 +00:00
38da682259
Moved to osf1_cvt_errno.c,v
1999-05-01 02:16:01 +00:00
333154d794
Moved from osf1_errno.c,v
1999-05-01 02:16:00 +00:00
34fde29505
update comment re: COMPAT_OSF1
1999-04-30 23:34:08 +00:00
f6b3b14ce3
enable COMPAT_OSF1
1999-04-30 23:33:41 +00:00
af8a9059d3
compute the value to be used for e_arglen via howmany(value, sizeof (char *)),
...
rather than just "value / sizeof (char *)". While in these cases the latter
works as well, the former's a better example for other uses to copy (since
it handles the non-integral multiple case correctly).
1999-04-30 23:07:01 +00:00
1bce8c40fc
ep_arglen is in units of 'sizeof (char *)', not in units of bytes. use
...
howmany(value, sizeof (char *)) to get the right value.
1999-04-30 23:02:06 +00:00
645d5bd5f6
Share everything with proc0.
1999-04-30 21:40:30 +00:00
b699afcb5b
Pay attention to FORK_SHARECWD, FORK_SHAREFILES, and FORK_SHARESIGS.
1999-04-30 21:39:51 +00:00
2835fc6e46
Pull signal actions out of struct user, make them a separate proc
...
substructure, and allow them to be shared.
Required for clone(2).
1999-04-30 21:23:49 +00:00
93857fda32
Comment out nell and pcmcia children until audioamd panic resolved
1999-04-30 21:09:50 +00:00
882d9195a3
Oops, forgot to commit this one. Free the cwdinfo on exit.
1999-04-30 20:54:04 +00:00
ff48595e8b
processes would have vm->vm_ssize screwed up when they faulted
...
data regions higher than USRSTACK.
1999-04-30 20:21:57 +00:00
16936c9565
Break cdir/rdir/cmask info out of struct filedesc, and put it in a new
...
substructure, `cwdinfo'. Implement optional sharing of this substructure.
This is required for clone(2).
1999-04-30 18:42:58 +00:00
c7ca008189
Make the proc structure reference the new cwdinfo structure, and define
...
a few more sharing flags for fork1().
1999-04-30 18:40:05 +00:00
1a1efc6b68
In lance_mediachange(), if there is no callback to the front-end, just
...
return 0 instead of EINVAL. In this case, there will only be one media
type, and the upper-level if_media code will ensure that the user is setting
to that type.
In other words, don't require the front-end to provide the no-op.
1999-04-30 18:15:04 +00:00
c7ea24c151
Back out previous. It was just ... braindamaged.
1999-04-30 17:47:36 +00:00
175b821dfe
If the driver only supports one media type, and ifmedia_ioctl() is called to
...
select the current medium, (and it is not autoselect), assume no change and
do not try to select the medium. Fixes 'ifconfig le0 medium 10base5' on sparc2
without requiring a 'do nothing' mediachange callback.
1999-04-30 17:30:49 +00:00
ef6e15ad0e
Include opt_compat_sunos.h
1999-04-30 16:50:44 +00:00
ed3c676245
Branch address was wrong.
1999-04-30 15:31:18 +00:00
57e4b98787
- Use the proper multiply instructions so that we don't get truncated.
1999-04-30 15:31:17 +00:00
b7ae9f8e40
Convert some bogus panic()s into printf()s.
1999-04-30 15:29:24 +00:00
8ed58f33a5
Add -n for ELF, note weirdness in comment.
1999-04-30 13:31:52 +00:00
35e47f06fa
Load the header too.
1999-04-30 13:28:58 +00:00
4bf3b7a9c1
Compile in support for ELF symbols.
1999-04-30 13:28:36 +00:00
b2c6b9a41d
- Nuke debugging aids mistakenly committed.
1999-04-30 09:43:23 +00:00
81248a0851
Add bootinfo struct to pass symtab arguments.
...
XXX: This does not work with ELF yet, but I don't understand why...
1999-04-30 09:29:40 +00:00
a042b8f9e4
Add bootinfo support for loading symbol tables.
1999-04-30 09:26:16 +00:00
bf88b9104e
Include opt_compat_sunos.h
1999-04-30 09:21:54 +00:00
1a3537df95
OSF/1 locore-ish bits. right now just sigcode
1999-04-30 05:58:10 +00:00
04f53f0b03
gross hack for SIGFPE under OSF/1, until ross makes SW completion go
1999-04-30 05:47:53 +00:00
ee94a4dacb
add checks for COMPAT_OSF1 in the appropriate places
1999-04-30 05:29:20 +00:00
5a93f3c9b1
emulate wait4(), put some guts into sysinfo(), and redo fcntl()
...
F_{GET,SET}FL emulation.
1999-04-30 05:25:34 +00:00
28410181b2
return error if unsupported sigaltstack flags used
1999-04-30 05:24:04 +00:00
a928d381b2
regen
1999-04-30 04:36:04 +00:00
9697f9c401
Add more sanity check.
1999-04-30 04:35:35 +00:00
d2d8e961fe
emulate wait4, clean up sigreturn args, emulate {get,set}domainname
1999-04-30 04:33:51 +00:00
e836b093b4
nuke most fcntl() F* flags, and note that O_* should be used instead.
1999-04-30 04:31:45 +00:00
4f8cf68674
Rototillage; make this actually useful. To wit:
...
- Initialize more of the Bt463's registers, instead of leaving them
in undefined states. Notably, the window type table is set up
with 8-plane pseudocolor and 24-plane truecolor modes.
- Bus-space-ify, mostly. Could use some more cleanup, but not until
the rest of the tga stuff is converted, too.
- Do the TGA/RAMDAC communication dance more carefully.
- Explain a lot more of what's going on in comments.
1999-04-30 02:47:42 +00:00
c21c5d0c2d
systeminfo.h SI_* constants, wait.h W{NOHANG,UNTRACED}, plus spacing cleanup
1999-04-30 02:12:03 +00:00
afe914207b
we can actually setitimer() now
1999-04-30 01:57:27 +00:00
94a4e36ed2
use osf1-specific sigcode
1999-04-30 01:46:09 +00:00
c5a82dd848
* New MI man page for fp{set,get}{round,sticky,mask}(3).
...
* Implement fpgetsticky() for alpha.
* Direct fpsetsticky() and fp{get,set}mask() into alpha kernel via sysarch(2).
* Define new sysarch(2) stub for above and install and distribute sysarch.h
for alpha. (The fpcr IS user mode r/w, but for reasons beyond the scope
of a commit message kernel calls are needed.) And much kernel Magick is
required before these do anything, but this way programs compiled under
1.4 will DTRT on future snapshots and releases.
1999-04-30 00:58:30 +00:00
b14028acc2
- I finally learned CSR_A register of IMS G332 VDAC must be treated as
...
write only. Read-motify-write operation breaks its video mode.
- VDAC regiters are now initialized as ULTRIX does.
1999-04-30 00:44:11 +00:00
6abb3f7b37
regen
1999-04-29 23:39:55 +00:00
59c243a0b7
emulate setitimer(), but for now just return EINVAL. stub sysinfo() (XXX).
1999-04-29 23:37:23 +00:00
986bcb3e71
Typo/braino?
1999-04-29 22:20:42 +00:00
e9bc2c7ae3
need to emulate setitimer and sysinfo
1999-04-29 22:08:49 +00:00
3d5c979e43
Pull in opt_poollog.h for POOL_LOGSIZE.
1999-04-29 17:47:19 +00:00
3122ba5447
Split POOL_DIAGNOSTIC and POOL_LOGSIZE into seperate option header files.
...
The former is used in many places, and the latter in one, which makes
adjusting POOL_LOGSIZE rather painful.
1999-04-29 17:41:45 +00:00
2b9f4ca12d
in NetBSD, top 32 bits of ioctl com are always 0
1999-04-29 17:34:49 +00:00
0792acce0d
Regen.
1999-04-29 17:20:37 +00:00
fb1f070eba
Add entry for set_program_attributes().
1999-04-29 17:19:47 +00:00
8ef6e2a635
Implement set_program_attributes().
1999-04-29 17:18:59 +00:00
cec112a434
Make LK201 arrow keys work again.
1999-04-29 16:58:58 +00:00
0db2ca03ae
Add sunos_sigcode (32 bit only)
1999-04-29 16:40:41 +00:00
cc96413a0c
Revert previous bootinfo premature commit, and commit the sunos_sigcode
...
stuff instead.
1999-04-29 16:37:32 +00:00
d27f70c075
Include opt_compat_sunos.h
1999-04-29 16:22:03 +00:00
bd3e05dcd4
Add sunos_sigcode, sunos_esigcode trampoline that uses trap 1
1999-04-29 16:20:44 +00:00
4c1bb7794a
Need sunos_sigcode and sunos_esigcode now that our sigreturn is
...
different.
1999-04-29 16:14:04 +00:00
5f139d3cc9
Add sunos_sigcode and sunos_esigcode for COMPAT_SUNOS
1999-04-29 16:13:04 +00:00
a38ee86714
Make ss_size something reasonable (not 0) so sigaltstack does not fail.
...
Pull me up plz!
1999-04-29 16:09:12 +00:00
8fb6c6124b
From Onno van der Linden:
...
Reorganise the driver some what.
Rename tr_reset() to the more appropriate tr_stop().
Create a common tropic reset routine and use it in the frontends.
Move the code in tr_config() which is only used in the card attachment
routines into a new tr_attach() function.
Take adapter off the ring through tr_shutdown() in a shutdown hook.
This simplifies the bus-specific frontend.
1999-04-29 15:47:02 +00:00
29f999f240
options & filesystems tweeks.
1999-04-29 15:31:00 +00:00
c98240fc07
Don't use the direct console on color machines, which is currently not
...
supported. Use serial console instead.
From Matt Debergalis PR 7488.
1999-04-29 14:51:20 +00:00
e1529b8f93
Pull in the right generic m68k header. (Where was my mind?)
1999-04-29 14:38:39 +00:00
c3564f7b88
Don't go dereferencing pointers before verifying they are aligned.
1999-04-29 11:28:42 +00:00
a509481404
itimerval and related constants
1999-04-29 05:54:13 +00:00
599ebb4db1
Now we can use symbols in DDB. :-)
1999-04-29 05:15:30 +00:00
2cd33a0ce1
Implement retransmit logic for the SYN cache engine. Fixes a rare condition
...
where one side can think a connection exists, where the other side thinks
the connection was never established.
The original problem was first reported by Ty Sarna in PR #5909 . The
original fix I made to the code didn't cover all cases. The problem this
fix addresses was reported by Christoph Badura via private e-mail.
Many thanks to Bill Sommerfeld for helping me to test this code, and
for finding a subtle bug.
1999-04-29 03:54:22 +00:00
53af2d0054
Initialize db in copycols() to zero to pacify gcc, as noted by Simon Burge.
...
This doesn't change anything until it's fixed.
1999-04-29 03:38:39 +00:00
741030cc8a
Add loadfile_machdep.h
1999-04-29 03:17:12 +00:00
e4e1fcbaa6
Use MI loadfile().
1999-04-29 03:16:20 +00:00
7288a55336
Use a different initial FPCR, mainly to suppress the ieee inexact trap.
1999-04-29 03:02:20 +00:00
0847df9065
#ifdef _KERNEL, define the machine FPCR bits and a rounding mode macro
1999-04-29 02:55:50 +00:00
3801a05ffb
Add cookie for wsfont to px_info. Don't try to get/lock a font if we
...
are not the console.
1999-04-29 02:50:25 +00:00
34480e41c4
Add cookie for wsfont to rasops_info.
1999-04-29 02:49:40 +00:00
e2db3e3f25
Update usage comment.
1999-04-29 02:42:43 +00:00
ee325de1bb
regen for syscalls.master
1999-04-29 02:11:51 +00:00
1041a1c770
emulate access() and mprotect(), hook into COMPAT_43 get{peer,sock}name
1999-04-29 02:10:07 +00:00
f4507cddca
mprotect() and access()
1999-04-29 02:08:58 +00:00
cc4f9f6afb
access() flags
1999-04-29 02:06:50 +00:00
aa1e5724b9
WSEMUL_SUN -> WSEMUL_VT100
1999-04-29 01:28:40 +00:00
48003b2c88
Only use int13 extensions if the sectors can not be read through the
...
older CHS interface. This works around stupid BIOSs who report that
int13 extensions are present and functional, but fail when you actually
use them. Like Adaptec SCSI BIOSs.
1999-04-28 23:24:42 +00:00
770b67425d
Accelerate scrolling. Originally by Roland Dowdeswell, revised by
...
{drocher,ross}@netbsd.org.
1999-04-28 23:24:33 +00:00
5847397a4d
Add EEPROM_SSI EEPROM field (hardware revision-level info).
1999-04-28 22:47:44 +00:00
568b328c80
Recognize Linux ext2fs partitions. (Used to be marked as unknown).
1999-04-28 22:35:27 +00:00
073021116e
Add a 1 second delay to powerdown sequence to prevent the OpenBoot PROMs
...
from getting control and reporting a "powerdown failure", per PR#7487
1999-04-28 18:49:40 +00:00
188c3f6ae5
Fix for PR kern/7483: ex driver gets bogus MAC address with 3c905B
1999-04-28 17:34:01 +00:00
ab5806d4b8
Message cosmetics.
1999-04-28 16:17:42 +00:00
ea485e0d51
Handle fpunimp properly for fpu_emulate.
1999-04-28 16:16:58 +00:00
b40179bdca
MD version of loadfile.h
1999-04-28 15:26:21 +00:00
017ae4d0c4
Support for installboot
1999-04-28 15:25:43 +00:00
1c8494b7a2
Checkpoint of elf boot stuff:
...
- Use loadfile for both boot and installboot
- Fix problems with linking in bootxx
- Make installboot work with both a.out and ELF bootxx
- *WILL NOT BOOT YET ELF KERNELS* (a.out kernels work) I am working on it.
1999-04-28 15:22:25 +00:00
ccd32076df
Add -DLIBSA_NO_CLOSE
1999-04-28 13:27:18 +00:00
a2c49bf69e
Nuke local prototype for closeall(). Add a new define LIBSA_NO_CLOSE so that
...
we don't try to close files, if we are not using any other I/O.
1999-04-28 13:24:12 +00:00
ad64321aac
Include <sys/systm.h> to get prototype for memset.
1999-04-28 13:20:55 +00:00
4f8814a98c
Fix tyop
1999-04-28 10:58:10 +00:00
49a60fee19
Add loadfile_machdep.h
1999-04-28 09:19:35 +00:00
c22a8166d9
use new loadfile
1999-04-28 09:18:47 +00:00
c5ec77e01b
use new loadfile
1999-04-28 09:14:22 +00:00
5317a4673a
Use new loadfile
1999-04-28 09:14:07 +00:00
a030d021a7
Use new loadfile.c
1999-04-28 09:13:51 +00:00
2da63ed66f
cosmetic printf change
1999-04-28 09:12:24 +00:00
0766a607d4
MD defines for the MI loadfile
1999-04-28 09:10:07 +00:00
0fdd24ecdc
MI loadfile (used by i386, pmax and sparc shortly)
1999-04-28 09:08:50 +00:00
52b80ff167
fix some bugs (good to get to the point where bug-fixing is an issue!):
...
* when copying out the timezone in gettimeofday, don't accidentally copy
out the timeval again (into the timezone buffer).
* mmap() PROT_WRITE and PROT_EXECUTE imply PROT_READ.
1999-04-28 06:01:51 +00:00
eb910c35ce
From Ken'ichi Ishizaka: correct the calculation of the frame buffer
...
offset by masking off garbage bits in the DAFB v7. This has been
tested at all resolutions and common color depths on the LC47x.
1999-04-28 05:24:08 +00:00
278f92716f
regen for updated syscalls.master
1999-04-28 05:10:38 +00:00
d3708a1699
more timeval-related lossage. fixed some fns, added settimeofday & utimes
1999-04-28 05:09:47 +00:00
fc1142ac44
be more careful about getting the exec_name emul arg field
1999-04-28 02:49:38 +00:00
a61beae31e
regen for changed syscalls.master
1999-04-28 02:34:47 +00:00
a9deaa593a
emulate select(), to get the timeval right.
...
And CGD said, "Let there be eyes!" And there were eyes, and it was good.
1999-04-28 02:34:25 +00:00
4c9a03c3b3
do easy 'f'-class ioctls
1999-04-28 02:16:07 +00:00
3cca776d42
regen for changed syscalls.master
1999-04-28 02:03:45 +00:00
28561f9679
can't use system gettimeofday, and need to implement uname
1999-04-28 02:03:13 +00:00
93e2cb1a1e
uname, gettimeofday
1999-04-28 02:02:50 +00:00
ccd0018aca
uname and timezone structures, and some minor cleanup
1999-04-28 02:00:36 +00:00
894ce34c9d
Improved 509B-in-PnP mode detection (Christoph Badura, Jonathan Stone):
...
Verify EEPROM checksum, extract card rev-level, test capabilities
word, then test high-order config bits to verify card is in PnP mode,
and skip if so.
1999-04-28 01:20:01 +00:00
55fd59f1e0
Make PCI IDE DMA work on big-endian systems.
1999-04-28 00:18:12 +00:00
a9cd83c7af
Regen.
1999-04-27 21:32:05 +00:00
9fb29eae72
Update vendor names from an official(?) list.
1999-04-27 21:30:53 +00:00
9a3d734daa
actually define MADV_SPACEAVAIL. This could be the first case of
...
documentation actually getting ahead definition; the madvise() manual
page has since at least 1.3!
1999-04-27 20:13:06 +00:00
6e5469dc42
implement osf1_sys_madvise()
1999-04-27 18:45:22 +00:00
3cb15b5b9b
regen for changed syscalls.master
1999-04-27 18:41:37 +00:00
df6ae494ef
fix madvise args
1999-04-27 18:40:53 +00:00
99df19a561
madvise operation definitions
1999-04-27 18:38:07 +00:00
52b5bc5eb8
Duh. My last change broke mvme147 support.
1999-04-27 18:12:44 +00:00
d992bbf22c
Regen.
1999-04-27 18:09:00 +00:00
c05572b5b7
Add Gravis GamePad Pro (from Soren Jorvang).
1999-04-27 18:08:35 +00:00
3d0c9ec2a8
kill a couple of debugging printfs i accidentally left in
1999-04-27 17:56:52 +00:00
8f40430549
regen for changed syscalls.master
1999-04-27 17:53:11 +00:00
6b9bb2a3cb
fix getrusage args
1999-04-27 17:52:44 +00:00
009c460d25
emulate getrusage, add some XXXs
1999-04-27 17:50:59 +00:00
9a71b695bd
osf1_timeval and osf1_rusage and related constants
1999-04-27 17:50:23 +00:00
b1a4c46dab
Fix a typo that prevented this from compiling.
1999-04-27 17:37:18 +00:00
44cbebec30
note that his should be shot from a cannon
1999-04-27 16:09:28 +00:00
1f9cfb5d53
update for current reality
1999-04-27 16:08:40 +00:00
b69c7692af
From cgd again: pbuf == path on failure.
1999-04-27 15:42:37 +00:00
c4f1bab08e
Make the usage consistant and document it:
...
if the path was given in a user buffer, return the new path in
a user buffer.
if the path was given in a kernel buffer, allocate a new kernel buffer
to return the new path; the caller is responsible for freeing the buffer
if we fail always set the new path to NULL.
This usage broke when I adde the /../ shortcut. Noted by cgd.
1999-04-27 11:36:47 +00:00
3e9afa8b4d
- Save Mach_splX() calls which don't fit well with DECstation. MIPS
...
spl machinary will be reworked, someday.
1999-04-27 08:07:26 +00:00
f355b96b7a
note that this document is now out of date
1999-04-27 06:39:49 +00:00
7e3ad9e963
evil hack to work around non-fixed mmap requests
1999-04-27 06:37:12 +00:00
ce5ede558e
Fix excessive memory usage, and fix handling of SZOMB processes. PR #7164 ,
...
Jaromir Dolecek.
1999-04-27 06:02:09 +00:00
6ef8f59ae6
dynamic executable/loader handling, done right
1999-04-27 05:38:08 +00:00
e85db685e9
* don't have the [onz]magic setup functions set up the stack.
...
* add arguments describing the vnode and ecoff header of the executable
being set up to the [onz]magic setup functions.
* export the stack setup function and the [onz]magic setup functions.
* call the MD ecoff hook _before_ the [onz]magic and stack setup
functions, and bail out early if the MD hook sets up vmcmds.
1999-04-27 05:36:43 +00:00
5338149302
correct comment: turn off set-id if MNT_NOSUID is set, not MNT_NOEXEC.
1999-04-27 05:28:44 +00:00
0837de9c4b
Add support for the Fujitsu Towa LA501 Ethernet card. PR #6524 , Stephen Ma.
1999-04-27 04:56:18 +00:00
ae3e4919c2
Regen.
1999-04-27 04:52:04 +00:00
7931c9f84e
Add the Fujitsu LA501 Ethernet card. PR #6524 , Stephen Ma.
1999-04-27 04:48:43 +00:00
743038a6cb
clean up for ecoff_machdep.h changes, look for the loader
1999-04-27 03:19:44 +00:00
d5a491540c
Disable power management until the bug that caused it to hang the
...
machine can be found.
Addresses kern/6488, from Thorsten Frueauf.
1999-04-27 02:53:30 +00:00
7b8e7abdd6
use osf1_exec_ecoff_hook()
1999-04-27 02:33:35 +00:00
6f2f5becb6
Alpha ECOFF object type definitions
1999-04-27 02:32:33 +00:00
fe6198f6e2
do special OSF/1-specific ECOFF recognition (not yet complete), and
...
implement a copyargs function to do special argument copying for
emulated processes.
1999-04-27 01:45:03 +00:00
4f0ff8a077
Const'ify mbtypes[].
1999-04-27 00:05:44 +00:00
3dc48bf302
Bump WSFONT_L2R/R2L by +1 so 0 can mean no specific order is required.
...
Change entry for QVSS to match bitorder.
1999-04-26 23:41:57 +00:00
82f0525910
Make the 3Com Etherlink XL driver work on big-endian systems. From
...
Izumi Tsutsui, PR #7279 .
1999-04-26 23:28:31 +00:00
aa89ae23ba
Last fix broke kbd and mouse input under X for the console device. Fixed.
1999-04-26 23:26:11 +00:00
1eb689a712
Make the VIA Rhine driver work on big-endian systems. From Izumi Tsutsui,
...
PR #7305 .
1999-04-26 23:19:10 +00:00
5d82bfc656
Garbage-collect VM_MBUF_SIZE.
1999-04-26 22:47:34 +00:00
b8073b401b
Garbage-collect the VM_MBUF_SIZE constant. Instead, use the size
...
(nmbclusters * mclbytes), so that the right amount of KVA space is
allocated if those variables are patched.
1999-04-26 22:46:44 +00:00
3d23eb3ce3
More improvements to mbuf and mbuf cluster allocation:
...
- Initialize mbpool and mclpool with msize and mclbytes, respectively,
so that those values may be patched and have an actual affect on the
next system reboot.
- Set low water marks on mbpool (default: 16) and mclpool (default: 8).
This should be of great help for diskless systems, which need to allocate
mbufs in order to clean dirty pages; the low water marks increase the
chances of this being possible to do in memory starvation situations.
- Add support for getting/setting some mbuf-related parameters via sysctl.
* msize and mclsize (read-only)
* nmbclusters (read-only unless the platform has direct-mapped pool pages,
in which case the value can be increased).
* mblowat and mcllowat (read/write)
1999-04-26 22:04:28 +00:00
879070ef90
Add support for the kern.mbuf sysctl node.
1999-04-26 21:56:23 +00:00
b80d6596cd
Add mbuf sysctl variables: msize, mclbytes, nmbclusters, mblowat, and
...
mcllowat.
1999-04-26 21:55:53 +00:00
3750ef06a0
Add mbuf sysctl definitions.
1999-04-26 21:54:46 +00:00
c92294ac82
Add `mblowat' and `mcllowat' low water mark variables for mbufs and mbuf
...
clusters.
1999-04-26 21:53:59 +00:00
af3d525792
Fix adosfs's locking panic
1999-04-26 20:33:18 +00:00
bd33916784
exec internals have been moved (and improved) to osf1_exec.c. Not much
...
there yet, but more to come.
1999-04-26 18:34:05 +00:00
0d2cfcdb5a
Update vanity config
1999-04-26 18:30:45 +00:00
5ea46286eb
mii_phy_auto(): don't rely on an implicit declaration of the waitfor argument.
1999-04-26 14:48:57 +00:00
0c221127eb
More fixes to get the PXG working and keep the PX happy.
1999-04-26 12:05:11 +00:00
e54fa8abad
Fix silly bug where fbconnect() doesn't realize that it's already been
...
called during early console initalization, then pouts because there appears
to be n+1 framebuffers. This whole thing is a mess.
1999-04-26 12:03:53 +00:00
56a9b84b91
- MIPS processors do not impose inclusive (nesting) interrupt levels with
...
their interrupt lines. The notion and implemention of 'spl' are left
for how target ports approach to it.
1999-04-26 09:42:14 +00:00
9e798fbe20
- Forgot to commit these two.
1999-04-26 09:36:05 +00:00
c33ad91e49
- Sweep machdep.c; mostly imported from a development branch. Little
...
exposure of TC device any more. Correct comments which are no longer
feasible. Reorder declarations and definitions. Introduce 'clkread'
pointer to pull up model dependent high resolution timer value. Have
prom_systype() call.
- Place routines for model dependent high resolution timer.
- Program IOASIC registers inside os_init() call and nuke ioasic_init().
1999-04-26 09:23:21 +00:00
bd947212ac
major(), minor(), and makedev()
1999-04-26 06:10:36 +00:00
9524149336
use fcntl() flags from osf1.h, map all of them
1999-04-26 05:57:53 +00:00
1904f78fb5
fcntl() flags
1999-04-26 05:56:34 +00:00
6d24aedc2c
table-based translation of sigaction and sigaltstack flags
1999-04-26 05:35:08 +00:00
635a7843a1
copyright notice
1999-04-26 05:32:18 +00:00
d52e1e73df
Add cdev declaration for `px', major 98.
1999-04-26 04:42:10 +00:00
tron