writes to a string rather than outputs to the supplied printer.
This is convenient for disassemblers that are structured to
build a long string and print it later.
Perhaps db_printsym() should be changed to use this interface...
Original i386 log message:
Optimize the case of writing to /dev/zero, and clean up the
surrounding code a bit. Partly suggested by gwr.
I think this needs to be applied to arm26 as well.
containing the userland visible thinks (i.e. ioctl definitions).
Remove all (both) old ioctls, as they had a brain dead API and made keeping
binary compatibility more or less impossible.
Replace by several new ioctls. While there, remove any arbitrary limits
(resulting from the old, broken ioctls) and allow any length of names
and passwords.
device file is closed, rather on every descriptor close. Instead of
getting the exclusive lock on open and releasing on close, get
the lock only when needed in sysmonioctl_envsys().
Fixes kern/14368 by Anthony Mallet. Okayed by Jason Thorpe.
While here, also inline sysmon_envsys_init() to sysmonopen_envsys(),
and g/c sysmonioctl_wdog() prototype.
firmware to delay completion of commands so that it can attempt to batch
a bunch of completions at once- either returning 16 bit handles in mailbox
registers, or in a resposne queue entry that has a whole wad of 16 bit handles.
Distinguish between 2300 and 2312 chipsets- if only because the revisions
on the chips have different meanings.
Add more instrumentation plus ISP_GET_STATS and ISP_CLR_STATS ioctls.
Run up the maximum number of response queue entities we'll look at
per interrupt.
If we haven't set HBA role yet, always return success from isp_fc_runstate.
for DEC-based chips, and to have tlp available for tulip clones. The change
in GENERIC is such that TLP_MATCH options are commented out (allowing de to
attach to DEC-based chips), and change in is INSTALL such that de is present
and TLP_MATCH options are commented out.
The addition of de in INSTALL increases its compressed size by about 17 KB.
Primarily the goal is to have INSTALL and GENERIC use the same device.
This will fix PR port-macppc/10779.
It has been tested with the 1.5.3_ALPHA GENERIC and INSTALL kernels on my
PowerMacintosh 7300 with a 21140A (now de, previously tlp) and a
Lite-On 82C115 (tlp).
de0 at pci0 dev 15 function 0
de0: interrupting at irq 25
de0: Asante 21140A [10-100Mb/s] pass 2.2
de0: address 00:00:94:a4:03:35
de0: enabling 10baseT port
tlp0 at pci0 dev 14 function 0: Lite-On 82C115 Ethernet, pass 2.5
tlp0: interrupting at irq 24
tlp0: Ethernet address 00:00:94:b6:16:ef
tlp0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX
export the label we use for that purpose, otherwise, that smart gas will
change it to a relative jump, which does basically nothing.
I can finally boot NetBSD/amiga ELF. (Yippee!)
While there, test if we are a 68851 before we invalidate the TLB,
instead of doing it between the TLB flush and the data cache flush.
an interrupt anyway, just in case. Otherwise, report the timout condition.
This works around a problem in my ibook if a key is pressed after boot
and before adb is configured, such as when booting with -d.
just skip that page. this situation can arise legitimately when a file
with a wired mapping is truncated so that a wired page is no longer
part of the file.
from VM_FAULT_WIRE in that when the pages being wired are faulted in,
the simulated fault is at the maximum protection allowed for the mapping
instead of the current protection. use this in uvm_map_pageable{,_all}()
to fix the problem where writing via ptrace() to shared libraries that
are also mapped with wired mappings in another process causes a
diagnostic panic when the wired mapping is removed.
this is a really obscure problem so it deserves some more explanation.
ptrace() writing to another process ends up down in uvm_map_extract(),
which for MAP_PRIVATE mappings (such as shared libraries) will cause
the amap to be copied or created. then the amap is made shared
(ie. the AMAP_SHARED flag is set) between the kernel and the ptrace()d
process so that the kernel can modify pages in the amap and have the
ptrace()d process see the changes. then when the page being modified
is actually faulted on, the object pages (from the shared library vnode)
is copied to a new anon page and inserted into the shared amap.
to make all the processes sharing the amap actually see the new anon
page instead of the vnode page that was there before, we need to
invalidate all the pmap-level mappings of the vnode page in the pmaps
of the processes sharing the amap, but we don't have a good way of
doing this. the amap doesn't keep track of the vm_maps which map it.
so all we can do at this point is to remove all the mappings of the
page with pmap_page_protect(), but this has the unfortunate side-effect
of removing wired mappings as well. removing wired mappings with
pmap_page_protect() is a legitimate operation, it can happen when a file
with a wired mapping is truncated. so the pmap has no way of knowing
whether a request to remove a wired mapping is normal or when it's due to
this weird situation. so the pmap has to remove the weird mapping.
the process being ptrace()d goes away and life continues. then,
much later when we go to unwire or remove the wired vm_map mapping,
we discover that the pmap mapping has been removed when it should
still be there, and we panic.
so where did we go wrong? the problem is that we don't have any way
to update just the pmap mappings that need to be updated in this
scenario. we could invent a mechanism to do this, but that is much
more complicated than this change and it doesn't seem like the right
way to go in the long run either.
the real underlying problem here is that wired pmap mappings just
aren't a good concept. one of the original properties of the pmap
design was supposed to be that all the information in the pmap could
be thrown away at any time and the VM system could regenerate it all
through fault processing, but wired pmap mappings don't allow that.
a better design for UVM would not require wired pmap mappings,
and Chuck C. and I are talking about this, but it won't be done
anytime soon, so this change will do for now.
this change has the effect of causing MAP_PRIVATE mappings to be
copied to anonymous memory when they are mlock()d, so that uvm_fault()
doesn't need to copy these pages later when called from ptrace(), thus
avoiding the call to pmap_page_protect() and the panic that results
from this when the mlock()d region is unlocked or freed. note that
this change doesn't help the case where the wired mapping is MAP_SHARED.
discussed at great length with Chuck Cranor.
fixes PRs 10363, 12554, 12604, 13041, 13487, 14580 and 14853.
we need to make sure that vnode pages are written to disk at least once,
otherwise processes could gain access to whatever data was previously stored
in disk blocks which are freshly allocated to a file.
uobject and uanon pointers rather than at the PQ_ANON flag to determine
which lock to hold, since PQ_ANON can be clear even when the anon's lock
is the one which we should hold (if the page was loaned from an object
and then freed by the object).
this fixes calling OF_finddevice() with invalid devices,
and as a result fixes booting with -d.
Apparently openfirmware expects persistence of sprg2 and/or sprg3
I suspect this is used when handling exceptions
translation, get rid of sbus_bus_addr. Since sbus_bus_addr is used by
framebuffer drivers that are shared with sparc64 we cannot just change
the callers to use BUS_ADDR() w/out coordinating the change with
sparc64 that uses a different calling protocol, so stub our
sbus_bus_addr to just return BUS_ADDR.
not going to wait for. this doesn't matter for real devices since we call
VOP_STRATEGY() directly, but NFS uses this flag to decide whether or not
to hand the buffer off to an nfsiod thread.
which will cause the values of tf_pc and tf_npc set here in cpu_fork()
to be restored and used to return to user space from sigreturn() eventually
(before that the tf_pc and tf_npc set in sendsig() will be used in
proc_trampoline()).
Also, the fork system call never uses the SYSCALL_G2RFLAG shortcut, so drop
the code handling that.
(instead of `tf_npc') contains the user-space return address. This ensures
entering the signal trampoline code correctly in case we take handled
signal during child_return().
do not mark the filesystem clean, as this will mean that one or more
files were likely not completely removed (will show up as unconnected
in fsck). Prevents filesystems from being marked clean while they're
not until this problem has been figured out.
Also make the interrupt handler for older 3com cards look like the xl one.
I.e. don't ack the interrupt latch bit before checking if it is set.
At the same time, introduce constants for the watched interrupts, so that
we don't copy them all over the place.
attaches to the hub, and HID drivers (ums, ukbd, and uhid) attach to
uhidev. The reason for this change is that some HID devices report multiple
components (like a keyboard and a mouse) using the same interface, but with
different report identifiers. The report identifier can be specified with
a locator for the HID drivers.
Furthermore, change the ukbd driver to handle other formats than the boot
protocol.
jmcneill