Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
93,612 Commits 606 Branches 0 Tags 3.1 GiB
Commit Graph

53920 Commits

Author SHA1 Message Date
augustss 27cee6c777 Regen. 2002-02-27 23:29:01 +00:00
augustss f2afa010b1 Add some more stuff that might make Palm and Sony devices work. 
(Gleaned from Linux.)
 2002-02-27 23:00:03 +00:00
augustss 50a7e169bc Add Palm m125. 2002-02-27 22:45:16 +00:00
scw f179ae8cce Get in sync with include files. 2002-02-27 21:55:44 +00:00
scw 509f6019ae Add entry for mvmeppc. 2002-02-27 21:33:46 +00:00
scw 4c447e5383 New port: NetBSD/mvmeppc 
Based mostly on NetBSD/prep at this time since the earlier mvme160x
boards are pretty much PReP compliant. Later boards in the range
diverge somewhat from the reference platform, hence the separate port.

Still needs *lots* of bashing into shape, but at this time it will
boot to multi-user over ethernet on an MVME1603-051.
 2002-02-27 21:02:12 +00:00
martin fe3a97c935 regen 2002-02-27 21:01:55 +00:00
martin b6b3e04f66 Avoid duplicate define for ATI Rage Pro PCI 2002-02-27 21:00:28 +00:00
leo f70bec2792 Also visit the file2swp subdir. 2002-02-27 20:29:14 +00:00
leo 927df39940 copy a file to a 'SWP' partition 2002-02-27 20:14:39 +00:00
junyoung 53e222d45c Regen. 2002-02-27 16:38:08 +00:00
junyoung ab2517393d Fully revise product IDs for ATI Mach64 and Rage graphics cards. 
XXX Rage 128 not revised.
 2002-02-27 16:36:41 +00:00
pk f478419a29 Calling pmap_zero_page() (in #if DEBUG section) from pmap_bootstrap() hangs 
an E250; comment it out.
 2002-02-27 16:09:51 +00:00
chs 2cce3ebcba honor the PG_RDONLY flag (so that NFS can clear the PG_NEEDCOMMIT flag 
when page with it set is modified again).  fixes PR 15733.
 2002-02-27 16:02:03 +00:00
augustss 5d2b04bb42 Move the interrupt bailout when a cancelled ii is found. 2002-02-27 12:42:41 +00:00
augustss 5663022c32 Remove spurious splusb(). 
Lower abort hardware wait.
 2002-02-27 12:12:45 +00:00
simonb 06b7c00543 s/DEL_ZERO/DEV_ZERO/ 2002-02-27 06:51:57 +00:00
jmc 71b05541b5 Initial layout for SBP2 routines. Mainly just the code yanked from fwnode.c 
so it's not lost.
 2002-02-27 05:12:11 +00:00
jmc 6cf5c78fa4 Basic prototype/beginning of firewire disk support using sbp2/scsi. Commiting 
to have a baseline.
 2002-02-27 05:11:27 +00:00
jmc 40cba409bb Change/pretty up some debugging info. 
Also, add unit location fields to the ROM image. The p1212 spec requires
unit locations if you have 2 or more unit directories which is the case for
ipv4 and ipv6 compiled into a kernel.
 2002-02-27 05:09:15 +00:00
jmc f04610f130 Move definition of if_fw fifo location to ieee1394reg.h as it's needed for 
filling in unit location in the rom.

XXX: This all is really too welded together. The if_fw code should be
decoupled from this and simply be handed a method by which it can provide
the config rom back to the main code.
 2002-02-27 05:07:25 +00:00
jmc d455d6316d Add 3 more macros for extracting info from bus info block 2002-02-27 05:05:39 +00:00
jmc ea96c58797 Change length values to u_int32_t 2002-02-27 05:04:28 +00:00
jmc cc7dba0633 Add definition for ieee1212/p1212 2002-02-27 05:03:24 +00:00
jmc ed05bf459e Rototill fwnode.c to rely on the p1212 routines to parse and validate the ROM 2002-02-27 05:02:25 +00:00
jmc 8140d3a6bb Note done sections related to fwnode/ieee1212 stuff 2002-02-27 05:00:55 +00:00
jmc 2d478bd8d8 Move over from std to here 2002-02-27 05:00:00 +00:00
jmc 524644efa7 SBP is a firewire/ieee1394 specific protocol, not a generic standard. Move this 
to the ieee1394 directory
 2002-02-27 04:59:29 +00:00
jmc b1eeba63dc Initial checkin. 
A framework for parsing p1212 compliant ROM's and returning a tree that
describes it. Include routines for searching the tree, walking it to
apply functions against nodes and printing out the tree.

Also provide a utility routine to take all the unit dirs present in a ROM,
loop against them and present them to config_found to configure all possible
sub devices.
 2002-02-27 04:58:50 +00:00
jmc 00ea0581b5 Add a few more extraction macros and begin the ALLOW list of flags for 
overriding specific checks in p1212_parse
 2002-02-27 04:55:58 +00:00
kleink 39a685458d Fix pastos & typoe. 2002-02-27 04:13:10 +00:00
lukem 1119bfe6ea nfs_connect(): if NFSMNT_RESVPORT is set, set IP_PORTRANGE_LOW on the socket 
rather than using home-grown code to find a free reserved socket.
this also results in nfs pcb's having the INP_ANONPORT and INP_LOWPORT flags
set, which is useful for netstat(1) to know.
 2002-02-27 03:46:36 +00:00
matt 178af24f65 Add a comment to where we increment intr_depth to show that intstk+INTSTK 
== intr_depth. (gag)
 2002-02-27 03:27:14 +00:00
kleink ebb0f83c31 Sort. 2002-02-27 02:21:22 +00:00
rafal 929d489997 In _bus_dmamap_sync, only invalidate as much data as there is in the current 
segment rather than invalidating the total map length for each segment.
 2002-02-27 01:51:48 +00:00
itojun 2ff9b43758 sync blowfish function prototype between i386 assembly and C. 
From: YAMAMOTO Takashi <yamt@mwd.biglobe.ne.jp>
 2002-02-27 01:32:17 +00:00
augustss 0357a44190 Avoid a race condition spotted by UCHIYAMA Yasushi <uch@vnop.net>. 2002-02-27 01:30:50 +00:00
christos e8116a8f5b - Use DEV_ constants, instead of documenting the numbers! 
- Delete cdev_decl(mm); where appropriate, and other hand-crufting [hi powerpc!]
 2002-02-27 01:20:51 +00:00
christos 6b030ee036 - define other DEV_ constants that the local port uses. 
- delete cdev_decl(mm) since <sys/conf.h> does it.
 2002-02-27 01:19:03 +00:00
christos a5890d9fa8 - add constants for DEV_{MEM,KMEM,NULL,ZERO} only arm is the oddball one using 
3 for DEV_ZERO and should be fixed.
- cdev_decl(mm) since all the ports do the same.
- change _mm_ initialization to include ioctl entry point.
 2002-02-27 01:17:58 +00:00
christos 61924161d3 Add mm.c 2002-02-27 01:16:30 +00:00
christos 5d823a2299 Start of mi /dev/{mem,kmem,zero,null} driver. We add an ioctl entry, because 
we don't want to throw an error when FIONBIO is requested. We also allow
FIOASYNC clear.
 2002-02-27 01:16:14 +00:00
jmcneill f876e538ae Add options (commented out) for disabling power hooks on the pms and pmsi 
PS/2 mouse drivers.
 2002-02-27 00:31:12 +00:00
jmcneill cc72a54933 Add constraints to allow for disabling PS/2 mouse powerhooks. As requested 
by Chuck Cranor.

To disable powerhooks with the pms and pmsi drivers, respectively:
  options PMS_DISABLE_POWERHOOK
  options PMSI_DISABLE_POWERHOOK
 2002-02-27 00:30:07 +00:00
kleink 5424a781c8 Upon reflection, use hexadecimal values for previous, which make the 
segment/block/battable relationship far more obvious.
 2002-02-26 23:56:52 +00:00
kleink 4218adb6c2 Move battable entries for I/O to their correct pseudo-segment offsets; 
while BAT spills currently don't happen, it should be possible for the
handlers to find them at the expected address anyway.

XXX Why the PCI I/O and Memory spaces are being installed in the iBAT
XXX registers is beyond me.
 2002-02-26 23:45:54 +00:00
eeh 1eb3484425 Fix PR# port-sparc64/13811: PCITAG_SETNODE() is defined using `x' insted of `t'. 
from URA Hiroshi
 2002-02-26 22:39:14 +00:00
tv b2ec8a78fc NEW_PIPE is no longer a configurable option (there's only PIPE_SOCKETPAIR, 
inverted logic).
 2002-02-26 21:44:29 +00:00
kleink 5e6a2be4e0 For the time being, add a wrapper around GENERIC causing the tlp driver 
to match the on-board 21040, which the de driver has issues with.
 2002-02-26 19:02:50 +00:00
kleink 9fcf8c7e63 Add platform support for the Motorola Ultra Plus and Ultra 60x boards. 
Note that this currently matches only the boards built into Bull Estrella
systems, as Bull chose to change the board identification string whose
original content is not known at this time.
 2002-02-26 16:09:14 +00:00
kleink 5eb5b37d22 Add the same probe fig leaf as in the mk48txx attachment to prevent 
false positives.
 2002-02-26 15:28:38 +00:00
simonb d9ab16ba2f Purge CLSIZE, CLSIZELOG2 and MCLOFSET. 
Be consistant in the way that MSIZE, MCLSHIFT, MCLBYTES and NMBCLUSTERS
  are defined.
Remove old VM constants from cesfic port.
Bump MSIZE to 256 on mipsco (the only one that wasn't already 256).
 2002-02-26 15:13:19 +00:00
itohy 4283f00882 1. Change equalizer (treble, bass) to be ``flat'' if the values set at 
the center position (128), so as to be compatible with other drivers.
    The equalizer is enhancement only, and the values < 128 don't take
    any effect.

    Yeah, this causes spec change....
    For equalization.treble and equalization.bass, the relation between
    old and new value is

	new_value = (old_value / 2) + 128.

    (Note this does not apply to equalization.surround.)

 2. Support ++ and -- of mixerctl(1) for stepping volume variables.

 3. Fix problem where the chip is not powered up
    when the mic input is unmuted.
 2002-02-26 14:57:36 +00:00
wiz eb16f6854f Typo fix. 2002-02-26 14:54:50 +00:00
simonb 9f5c966439 We are not a DECstation. 2002-02-26 12:45:24 +00:00
joda b57f5ccbca in esa_resume, call esa_codec_reset; makes it much more happy after a 
suspend on my O500 (snatched from FreeBSD)
 2002-02-26 11:05:05 +00:00
augustss ae9f835cf2 A small fix for FreeBSD. 2002-02-26 10:27:49 +00:00
augustss 2c66bc238b Fix a typo that prevented timeout in control requests from working. 
Spotted by Alfred Perlstein <bright@mu.org>.
 2002-02-26 10:22:48 +00:00
dbj 2622b21584 use #ifdef WI_DEBUG instead of #if WI_DEBUG 2002-02-26 09:29:18 +00:00
dbj 44ab750650 avoid walking full length of unknown stats structure. 
this partially addresses pr14385.
there is still a byte swapping bug retrieving the
stats structure.  Since both the type and the length
are incorrectly swapped, we would timeout while reading
an extra long section (caused by the byteswapped length)
of garbage data.
turning on WI_DEBUG now just reports the unknown info type
which can be seen to be obviously incorrectly swapped
on macppc
 2002-02-26 09:18:54 +00:00
augustss ab875c9c5c Some minor fixes from FreeBSD. 2002-02-26 02:00:16 +00:00
kleink f7a55f56d3 PIR is the same on 601. 2002-02-26 00:48:58 +00:00
kleink 326c1b225d Move the ext_intr() variant using the board interrupt vector register 
into common code; it is not specific to the 6050, and in fact not even
specific to IBM-built hardware.
 2002-02-26 00:30:10 +00:00
augustss 97e6cc6f72 Fix an uninitilized request. From Alfred Perlstein <bright@mu.org>. 2002-02-25 22:39:01 +00:00
manu f8e0ee9efc Fixes a bug in argument passing to ntp_adjtime1. patch submitted by 
paul@Plectere.com (see kern/15519)
 2002-02-25 21:16:36 +00:00
kleink 03cae416f5 Add an attachment for the MK48T18 RTC/NVRAM found on some Motorola boards. 2002-02-25 19:09:43 +00:00
kleink 9e8cc352a9 Update datasheet URLs. 2002-02-25 17:37:47 +00:00
ad 3f78ffdeca Argh, dont reference any wscons parts in files.dec yet. 2002-02-25 17:11:17 +00:00
kleink bc2fec2880 Typo in comments. 2002-02-25 16:18:19 +00:00
ad f89bb3064e Move the dz driver to dev/dec, since it can be shared with pmax. 2002-02-25 14:58:06 +00:00
itojun 8832af6e59 correctly enforce ipsec policy check on forwarding case. 
From: Greg Troxel <gdt@ir.bbn.com>, Bill Chiarchiaro <wjc@work.cleartech.com>
 2002-02-25 02:17:55 +00:00
augustss 306aa99ff8 Some portability improvement. 
Add define for usb.h version.
 2002-02-25 00:46:37 +00:00
chs 811c8fad2b in amap_pp_adjref(), avoid unnecessary fragmentation of the am_ppref array 
by merging the first changed chunk with the last unchanged chunk if possible.
 2002-02-25 00:39:16 +00:00
kleink d5fe2ac32f Declare the id argument to pci_conf_hook(9) as pcireg_t, which is more 
appropriate.
 2002-02-25 00:34:13 +00:00
kleink 6805e97fff Make the logic for wildcarding the I/O address actually achieve its purpose. 2002-02-25 00:04:49 +00:00
thorpej c92241b420 Correct a comment. 2002-02-24 20:51:56 +00:00
leo fa1cc12897 Move some disk I/O and disklabel functions into the library. The code 
mostly originated from aptck. Need an extra pass over aptck to cut out all
functionality now moved to the library...
 2002-02-24 20:51:07 +00:00
thorpej 4af7d26f26 Fix a couple of comments. 2002-02-24 20:44:28 +00:00
thorpej 0a4bc3ccd5 This file is obsolete. 2002-02-24 20:32:40 +00:00
thorpej 39c165f331 Add support for relocating gzboot's .text out of flash and into 
RAM (while still decompressing the image directly from flash).

This makes gzboot run a LOT faster.
 2002-02-24 20:29:44 +00:00
dbj 5f15cedc89 solve polled adb keyboard problems with dropped keys and unsynced caps lock 
by queueing polled keys.
 2002-02-24 20:20:20 +00:00
uch 31ae0ac1e9 clean up Makefiles 2002-02-24 20:10:53 +00:00
uch 6bda0e36c3 use sh_clock_get_pclock() instead of PCLOCK. 2002-02-24 19:35:42 +00:00
thorpej d819468d64 Improve zlib error reporting. 2002-02-24 18:36:29 +00:00
uch 3c3da7bf57 _start -> start. 2002-02-24 18:24:15 +00:00
uch 693be1956c Move common exception vector and scheduler code to 
sh3/sh3/exception_vector.S and sh3/sh3/locore_subr.S. exception
vectors are installed by sh_cpu_init().  machine/locore.S contains
kernel entry, interrupt handler, and some MD code.
 2002-02-24 18:19:40 +00:00
uch 72589177e0 remove obsolete file. 2002-02-24 18:13:06 +00:00
martin a7d662b71c Clear M_BCAST and M_MCAST on outgoing mbufs. 
Don't copy ttl from the inner packet to the encapsulating packet. Make
the outer ttl sysctl'able. This should close PR 14269 from Jasper Wallace
(change partly from there) and it makes traceroute work over gre tunnels.
 2002-02-24 17:22:20 +00:00
martin fe97d3f7c3 Clear M_BCAST and M_MCAST flags on mbufs before passing them down to the 
ethernet driver - just in case it would look at them and do the wrong
thing.
 2002-02-24 17:11:53 +00:00
is 3763cdd026 remove unused prototype (a duplicate with a typing error) 2002-02-24 15:20:05 +00:00
kleink 5410bbdb16 In order to support both indirect PCI configuration space access as well 
as direct-mapped PCI configuration space access (such as implemented on
the IBM 27-82650 PCI Host Bridge), switch to a function vector based
PCI configuration space access implementation.  The appropriate PCI
chipset tag is provided by platform-specific code.
 2002-02-24 13:19:06 +00:00
kleink 73cdf7f537 Get rid of cf_unit misuse. 2002-02-24 11:22:00 +00:00
kleink 5b6184e81b Upon reflection, really choose the right pseudo-segment for PCI memory space. 2002-02-24 10:58:41 +00:00
kleink 50838c01e1 Move battable entries for I/O to their correct pseudo-segment offsets; 
while BAT spills currently don't happen, it should be possible for the
handlers to find them at the expected address anyway.
 2002-02-24 10:56:54 +00:00
takemura 6df64c4e5e Make it compilable even if PCI wasn't configured. 2002-02-24 09:16:07 +00:00
ad a66008a0b5 Add WSMOUSE_TYPE_MAXINE. 2002-02-24 02:01:40 +00:00
thorpej ca1294612c Remove some globals defined in libsa. 2002-02-24 01:51:04 +00:00
kleink 764103c61c Regen: add IBM 82660 PowerPC to PCI Bridge and Memory Controller. 2002-02-24 01:44:00 +00:00
kleink 914e8aef4a Add IBM 82660 PowerPC to PCI Bridge and Memory Controller. 2002-02-24 01:42:36 +00:00
matt 28b1aa2b30 Move .s files to .S files. (and .s.o rules in boot/Makefile.inc) 
Put in register prefixes everywhere.
 2002-02-24 01:04:23 +00:00
ad fab93c4a60 Reserve majors 101 and 102 for wsmux and wsfont. 2002-02-24 00:39:36 +00:00
matt 17a0652faf Change the default entry for ELF. 2002-02-24 00:17:42 +00:00
matt e2d6f22138 Add register prefixes to these. 2002-02-24 00:12:41 +00:00
matt 6cad4b795d Upon further reflection, move udiv/urem to libkern and out of vax/vax. 2002-02-24 00:08:19 +00:00
matt 87806a826d Rename VAX kernel assembly source from .s to .S (the NetBSD standard) 2002-02-23 23:48:00 +00:00
manu 63b308a593 FIxed typo 2002-02-23 22:43:56 +00:00
manu d2e60e82f8 Fixed various sysconf() commands 2002-02-23 22:35:15 +00:00
gmcgarry 0166df69f5 Implement DIOCGDEFLABEL ioctl. 2002-02-23 21:55:25 +00:00
gmcgarry 49fd989e9b Unnecessary to cast splx() to void. 2002-02-23 21:54:31 +00:00
gmcgarry 562fb80d45 Make the keyboard attach printf a little less cryptic. 2002-02-23 21:53:25 +00:00
gmcgarry 5382848ec7 Recognise md as a valid root device. And since md disks don't get 
device_register()'d, don't go looking on our device list for them.
Ramdisk kernel now boot.
 2002-02-23 21:52:25 +00:00
gmcgarry 42abedb038 Trim down to 1.2MB ramdisk for booting on 4MB machines. 2002-02-23 21:48:08 +00:00
gmcgarry 19f1fd96ca Don't need printer support during installation. 2002-02-23 21:47:07 +00:00
gmcgarry 6a45dcbe5d Cleanup options for binary compatibility. HPUX and SUNOS are known to work. 2002-02-23 21:46:24 +00:00
gmcgarry feb0773e27 Support two-stage netboot. Is known to work on maxine, but problems 
have been reported on 3min.
 2002-02-23 21:43:57 +00:00
thorpej 0780eaaa32 Use bcopy() and bzero(), since the rest of libsa does. This means 
we don't have to pull in memset() and memcpy() from libsa.
 2002-02-23 20:48:14 +00:00
leo c3de71f0bf Fixup icu-code. It now works for both ISA and PCI. 2002-02-23 20:44:45 +00:00
thorpej 59f1dfe1c2 Don't need to provide zcalloc() and zcfree(); there are such routines 
in libz.
 2002-02-23 20:34:41 +00:00
thorpej 524d248b59 Fix the -DRELOC=... CPP flag. Add -DDYNAMIC_CRC_TABLE to shrink 
the text (and, thus, the space taken up in flash) a bit.
 2002-02-23 20:19:52 +00:00
briggs caaef6d0d0 Implement obio_bs_rr_1. 2002-02-23 19:55:34 +00:00
thorpej a91d5a1a99 Example Makefile and linker script for building a run-from-flash 
gzboot image for the IQ80310 with room for 2M of compressed data.
 2002-02-23 19:16:54 +00:00
thorpej c39065eb62 Add support for running directly out of flash: 
* Require that the builder Makefile provide a linker script.
* After making sure the MMU is disabled, check to see if
  _etext == __data_start.  If not, then copy the .data contents
  into RAM.
* Put the stack in .bss.
 2002-02-23 18:19:09 +00:00
thorpej 87de164ab4 Fix a silly bug in the propellor spinning code. 2002-02-23 17:25:32 +00:00
scw c4dbe1a160 Allow MD code to provide functions for reading/writing NVRAM/RTC 
locations. If passed NULL, the old behaviour using bus_space_{read,write}_1()
is used. Otherwise, all access to the chip goes via the MD functions.

This is necessary for mvmeppc boards where the mk48txx NVRAM/RTC is not
directly addressable.
 2002-02-23 17:18:54 +00:00
fvdl 99d2b6e3ef Add linux_sysctl.c 2002-02-23 16:46:03 +00:00
ad b13d5cf210 Fix typo in previous. 2002-02-23 14:05:02 +00:00
toshii 3676484136 Make KERNEL_VM_SIZE a little larger so that ubc_init doesn't fail from 
ENOMEM.
 2002-02-23 14:02:48 +00:00
toshii 5e0f2080c8 Remove a bogus pmap_map_entry call. 2002-02-23 13:58:10 +00:00
dbj c467951c58 turn on polling using cnpollc 2002-02-23 10:51:50 +00:00
dbj b97918f553 In adb_soft_intr, remove the packet from the queue before calling the 
completion routine so that the completion routine can reentrantly
process the queue.  This happens, for example. when polling is turned
on by entering the debugger by keystroke.
 2002-02-23 10:47:16 +00:00
thorpej d114b32f24 Add some nops after we enable the MMU, for good measure (enough for 
the nops to be the prefetch'd insns when the MMU switch occurs).
 2002-02-23 05:58:46 +00:00
thorpej f31f6affa9 Make sure the MMU is enabled after we switch to the new kernel 
page tables (gzboot disables the MMU before it does its work).
 2002-02-23 05:55:26 +00:00
thorpej 0b91bc440f Move files[] from open.c to globals.c, so that it's possible to 
use libsa in an application where there are no file systems or
devices.
 2002-02-23 05:44:24 +00:00
thorpej 0fac1c42e9 gzboot -- boot a gzip'd kernel image. This is useful for booting 
compressed kernel images from flash.

This needs more work, but is a good first-pass.
 2002-02-23 05:41:14 +00:00
thorpej 1152fa21da Add some simple standalone device drivers for IOP310-based boards. 2002-02-23 05:12:01 +00:00
martin 8af2b425a2 Add a missing call to isapnp_config(). 
Do not hardcode IST_EDGE, use the type from the attach args.

Noticed by Christos Zoulas.
 2002-02-22 21:26:47 +00:00
uch 43eee13717 fix comment. 2002-02-22 19:56:27 +00:00
uch b1b1f1117b NetBSD/sh3 common part of clock routine. 2002-02-22 19:55:33 +00:00
uch f3b1882035 print MMU infomation. 2002-02-22 19:46:34 +00:00
uch 45407e955f setjmp,longjmp are moved to sh3/locore_subr.S 2002-02-22 19:45:31 +00:00
uch f694c9fdd7 New NetBSD/sh3 clock framework. 
+ hardclock source is moved from TMU1 to TMU0.
 + SH3/SH4 common kernel support.
 + PCLOCK estimation.
 + remove duplicated code.
 2002-02-22 19:43:58 +00:00
kleink 67678b7c54 Handle the 601's Run Mode/Trace Exception. 2002-02-22 18:50:45 +00:00
thorpej 9d157337f4 Fix the "va" argument to pmap_map_entry() when mapping kernel_ptpt. 2002-02-22 18:25:08 +00:00
thorpej ac5d6ab89f Fix the "va" argument to pmap_map_entry() when mapping kernel_ptpt. 2002-02-22 17:26:36 +00:00
christos ba74a6ad5a PR/15703: Sean Boudreau: Case in route_output() where struct rtentry *rt 
dereferenced after free.
 2002-02-22 17:26:31 +00:00
thorpej 37595cfcf8 Fix the "va" argument to pmap_map_entry() when mapping kernel_ptpt. 
This happened to work in the IOP310 because the kernel runs VA==PA.
 2002-02-22 17:23:13 +00:00
christos df34bbcc7a Regen 2002-02-22 17:13:46 +00:00
christos 5cdee96e49 PR/15701: Mike Wlodarczyk: ISAPNP data for another SupraExpress 56I SP V.90 2002-02-22 17:13:26 +00:00
skrll 25133dd770 Pass the VA for kernel_ptpt as the VA to pmap_map_entry 2002-02-22 17:11:59 +00:00
simonb e19a9be04b Note that "addu $x, $y, $0" is a "move" only in 32-bit mode. 
XXX: need to revisit this.
 2002-02-22 16:18:36 +00:00
ad f5ba8920cf Note that INSECURE is needed for X with a px or pxg. 2002-02-22 16:17:23 +00:00
ad 287977b3d2 Replace one of two divide ops with an AND when calculating the XYMASK 
address.
 2002-02-22 16:05:27 +00:00
skrll 7590561ee1 Make sure the kernel_pt_table has the right physical to virtual address 
mapping.
 2002-02-22 15:57:38 +00:00
kleink 543f1e7a2d Handle the 601's Run Mode/Trace Exception as well. 2002-02-22 13:51:40 +00:00
lukem da694bd77b fix spelos 2002-02-22 12:46:53 +00:00
enami 70ca5d5195 Record some page cache related information into ubchist. 2002-02-22 08:23:16 +00:00
briggs c31c5df13c Bumb NMBCLUSTER defaults to 2048 for GATEWAY and 1024 otherwise. These 
match current powerpc defaults and are more reasonable for the current era.
 2002-02-22 06:41:48 +00:00
thorpej 5164bca298 Also generate flat binary kernels for the IQ80310. 2002-02-22 05:07:46 +00:00
thorpej bb84e85802 Change pmap_map_entry() to work like pmap_map_chunk(): take a pointer 
to the L1 table and a virtual address, and no pointer to the L2 table.
The L2 table will be looked up by pmap_map_entry(), which will panic
if the there is no L2 table for the requested VA.

NOTE: IT IS EXTREMELY IMPORTANT THAT THE CORRECT VIRTUAL ADDRESS
BE PROVIDED TO pmap_map_entry()!  Notably, the code that mapped
the kernel L2 tables into the kernel PT mapping L2 table were not
passing actual virtual addresses, but rather offsets into the range
mapped by the L2 table.  I have fixed up all of these call sites,
and tested the resulting kernel on both an IQ80310 and a Shark.
Other portmasters should examine their pmap_map_entry() calls if
their new kernels fail.
 2002-02-22 04:49:19 +00:00
thorpej 77e3a89912 When reporting there is no VM map for a fault, also report the 
faulting address.
 2002-02-22 03:24:09 +00:00
christos 61e29fb60a Sean amended his patch not to include the IFAFREE() 2002-02-21 22:39:17 +00:00
mjacob 91f80cf3fc Implement F/W crashdumps for 2200 && 2300 cards (kernel compile option). 
Distinguish between 2312 and 2300 cards (they *are* different). Enable
RIO (Reduced Interrupt Operation) for the LVD cards (hey- I've seen
batched completions of the 30 commands at a time with this,....)...

If we get a Port Logout on local loop topologies, we have to force the
f/w to log back in. The easiest way (for us) to do this is to force
a LIP. This also will wake up the disk that probably just had a f/w crash.

Implement mailbox 'continuations'- this allows interrupts to re-drive
a mailbox command if it's one that just essentially repeats the previous
mailbox command (e.g., f/w download). This saves a boatload of sleep/wakeup
twitches.

If we're not a 2300 and we're about to return with a 'bogus interrupt'- check
the semaphore register to be non-zero at all and outgoing mailbox 0- this
seems to be where some of the lost ISP1080 commands came from.
 2002-02-21 22:32:40 +00:00
mjacob 11ab217af1 Add ISP_FW_CRASH_DUMP option for isp. 2002-02-21 22:23:33 +00:00
manu a9c374ed26 Added munmap() and mprotect() 2002-02-21 22:15:28 +00:00
christos 2446cd0b68 PR/15662: Sean Boudreau: make sure we clean all routes of an interface when 
we change its ip address.
 2002-02-21 21:59:16 +00:00
thorpej 79738a99e9 Keep track of which kernel PTs are available during bootstrap, 
and let pmap_map_chunk() lookup the correct one to use for the
current VA.  Eliminate the "l2table" argument to pmap_map_chunk().

Add a second L2 table for mapping kernel text/data/bss on the
IQ80310 (fixes booting kernels with ramdisks).
 2002-02-21 21:58:00 +00:00
manu 89e46d8a99 Reworked the o32/n32 matching scheme. IRIX uses some e_flags in the ELF 
header to distinguish between o32, n32 and n64 ABIs. We now use this.
This suppress the need of the mips_option test, which had some fake positive.
This also removes the mandatory ordering of n32 vs o32 in the exec switch
(exec_conf.c)
 2002-02-21 21:53:00 +00:00
kleink e9dc13b243 As discussed with Jason Thorpe: while the `cacheline_size\' argument is 
a byte-size quantity, the CacheLine Size configuration register specifies
the system cacheline size in units of 32-bit words; per PCI Local Bus
Specification, rev. 2.1, section 6.2.4.
 2002-02-21 20:22:48 +00:00
manu 9d16e4d12b Added gethostid/sethostid and the HOSTID command to systeminfo() 2002-02-21 11:09:43 +00:00
itojun 9c68db2bfc suppress source quence message, based on router-req RFC (also could be abused 
as DoS traffic generator).  from kjc/kame
 2002-02-21 08:39:33 +00:00
enami 60dccae121 Add RCS Id. 2002-02-21 08:23:31 +00:00
thorpej 6d35f61035 In pmap_map_chunk(), if we can't use a section mapping, then 
make sure that the L1 slot for the current VA points to an L2
table, and panic if it doesn't.
 2002-02-21 06:36:11 +00:00
thorpej d96b0a83af Delete some unneeded comments. 2002-02-21 06:33:05 +00:00
enami 147331af13 Fix broken indentation. 2002-02-21 05:30:30 +00:00
thorpej 15e0450397 Always pass the L1 table to pmap_map_chunk(). This allows pmap_map_chunk() 
to perform some error checking.
 2002-02-21 05:25:23 +00:00
thorpej 454e106a48 map_chunk() -> pmap_map_chunk(), and move it to pmap.c 2002-02-21 02:52:19 +00:00
thorpej 5aa173cc6b Update for death of arm32. 2002-02-21 02:43:57 +00:00
eeh 93ead6c5e0 Fix pr sparc64/15633: datafault at tlp_start causes panic 
Also clean up some additional 32-bit kernel printf issues.
 2002-02-21 02:42:27 +00:00
simonb b0a8050029 regen: Use BCM prefix instead of SB prefix in previous. 2002-02-21 00:00:28 +00:00
simonb 1d958329b8 Use BCM prefix instead of SB prefix in previous. 2002-02-20 23:59:58 +00:00
simonb 1df79a37a8 regen: Add the SiByte/Broadcom SB1250 PCI and LDT bridge IDs. 2002-02-20 23:53:32 +00:00
simonb 034caadcd2 Add the SiByte/Broadcom SB1250 PCI and LDT bridge IDs. 2002-02-20 23:53:01 +00:00
simonb ee0bfb00bf regen: Rename the SIBYTE entry to "Broadcom Corp. (SiByte)". 2002-02-20 23:46:55 +00:00
simonb e4007a266b Rename the SIBYTE entry to "Broadcom Corp. (SiByte)". 2002-02-20 23:45:50 +00:00
skrll e187e66235 Remove a whole load of non-CATS stuff. 2002-02-20 22:32:10 +00:00
augustss 0db3eee7bb Add quirks for Minolta Dimage X. 2002-02-20 22:28:54 +00:00
augustss dd0cea6baa Regen. 2002-02-20 22:28:20 +00:00
augustss b1b2559c84 Add Minolta Dimage X (very nifty!). 2002-02-20 22:27:54 +00:00
skrll f9d21f3995 Use shell arithmetic as much as possible and reduce the number of times 
that awk is used to one.

No functional change.
 2002-02-20 21:54:08 +00:00
manu 25e8963ed3 Fixed typo 2002-02-20 21:18:18 +00:00
skrll 2de2e35201 Fix typo in comment. 2002-02-20 20:47:40 +00:00
thorpej 425011f621 map_pagetable() -> pmap_link_l2pt(), and move it to pmap.c 2002-02-20 20:41:15 +00:00
christos 6728d906e9 Prefix structure members to protect them against clashes with eg. c++ keywords. 
Suggested by Alfred Perlstein, from FreeBSD, ok'd by augustss
 2002-02-20 20:30:12 +00:00
christos 07a8b6bf28 proper statfs emulation... 2002-02-20 17:03:03 +00:00
christos 227c487828 allow writing of kernel.version, kernel.osrelease, kernel.ostype... I might 
revert that l8r if I come up with something better.
 2002-02-20 17:02:48 +00:00
thorpej 75533175a2 Rename to NET4501. 2002-02-20 07:19:50 +00:00
enami bb41d19bca In the function uvm_page_own(), clear owner_tag after assertion so that 
we can see the owner when assertion failed.  Some indentation fix while
I'm here.
 2002-02-20 07:06:56 +00:00
enami 9a623b9870 Don't use MALLOC for variable sized allocation. 2002-02-20 06:16:22 +00:00
thorpej 889d3fedd3 Sample kernel configuration for a Soekris Engineering net4501 
single board computer.
 2002-02-20 03:15:35 +00:00
thorpej f777763ab3 * Rename the pxeboot binary from "pxeboot" to "pxeboot_ia32", since 
there are other architectures (e.g. IA64) which also use PXE.
* Get the console right in pxeboot, from Andreas Gustafsson.
* Add a "com0" version of pxeboot, to address the same issue that
  biosboot_com0 addresses.
 2002-02-20 03:00:27 +00:00
thorpej c44b9117f0 Collapse map_entry{,ro,nc}() into a single pmap_map_entry() that 
takes a prot and a "cacheable" indicator.
 2002-02-20 02:32:56 +00:00
simonb e0787bd639 Fix a tyop in a comment. 2002-02-20 01:34:19 +00:00
thorpej 9c31f51c34 Rename map_section() to pmap_map_section(), move it to pmap.c, and give it 
an extra argument (prot - specifies protection of the mapping).
 2002-02-20 00:10:15 +00:00
thorpej 9d6e94072b Bump the default data limit to 32M and the max data limit to 64M. 
These are the same values that the hp300 port uses (lesser hp300s
have roughly the same memory constraints as "lesser" vaxen), and
bumping them allows us to run a statically linked ELF groff(1).
 2002-02-19 22:44:35 +00:00
is 728d5e960d fix some swapped parameters 2002-02-19 22:42:25 +00:00
ragge f2d946a56e blkset() used a register for set value that get clobbered by movc5, 
causing the set area to get unpredictable contents.
 2002-02-19 21:46:17 +00:00
thorpej 825d4ec152 Increase the reset delay in ex_reset() as per dev/ic/elinkxl.c 
Pointed out by Love <lha@stacken.kth.se>
 2002-02-19 20:38:28 +00:00
thorpej dfeaa108c4 Add some comments to make some #if/#else/#endif's more clear. 2002-02-19 20:18:36 +00:00
thorpej 8545d4115b Put the netif driver name in the version banner. 2002-02-19 19:55:01 +00:00
thorpej 1ecb20dd3b Move the individual NIC ROM Makefiles into a subdirectories of 
netboot.  Requested by Christos.
 2002-02-19 19:49:37 +00:00
briggs acf12a854d Use the MI md_root 2002-02-19 17:41:15 +00:00
uch 5f5cce9adc Clean up function declaration. 2002-02-19 17:22:34 +00:00
uch 1bdc7cc5ca Clean up functions 
disable_intr, enable_intr, disable_interrupt, enable_interrupt,
disable_ext_intr, enable_ext_intr.
New functions:
for external interrupt:
_cpu_intr_suspend and _cpu_intr_resume.
for exception:
_cpu_exception_suspend and _cpu_exception_resume.
 2002-02-19 17:21:18 +00:00
wiz 37e458fa45 strategy should have an 'r'. Inspired by similar change in OpenBSD. 2002-02-19 17:09:40 +00:00
nathanw 20d013dbed Regen. 2002-02-19 16:46:12 +00:00
nathanw 502ca4a24b Add linux_sys_{get,set}rlimit. 2002-02-19 16:44:09 +00:00
nathanw cbc3e62bf0 Add LINUX_SA_NOCLDWAIT. 2002-02-19 16:35:59 +00:00
chs 96f907f394 fix two problems: 
- when yielding the cpu while using the vnode's page list, use a marker page
   to keep our place in the list (like the other cases where we drop the lock).
 - wait until no one else has the page busy before deciding if the page needs
   to be cleaned.  a page will be dirty while it's being initialized but will
   be marked clean before PG_BUSY is cleared.
both found by enami.
 2002-02-19 15:49:39 +00:00
uch a3757d3ba3 fix LCD byte-order setting. 2002-02-19 14:21:47 +00:00
simonb 724e595530 Regen: Add the Concord Camera Eye Q 3x. 2002-02-19 14:13:01 +00:00
simonb 63e8b06dff Add the Concord Camera Eye Q 3x. 
Reverse the Yamaha and Yano entries so they're in alphabetical order.
 2002-02-19 14:12:02 +00:00
rafal 5af2ddd207 Add LINUX_SA_NOCLDWAIT, LINUX_SA_RESTORER, update LINUX_SA_ALLBITS. Linux 
compat on mips builds again now.
 2002-02-19 14:11:49 +00:00
simonb 72359ec83c Fix indentation botch. 2002-02-19 14:07:26 +00:00
simonb 2d8577fb83 Clean up some rampant code duplication wrt ieee number handling: 
- Add alignment-safe double and float unions.
 - Use the above for the __infinity and __nan constants on all
   architectures that use the standard ieee754 representation of
   those constants.
 - Add a single copy of various ieee754 math functions (frexp, isinf,
   isnan, ldexp and modf) that had numerous duplicates among the
   arch-specific directories.
 - Use the above functions on all architectures where the generic C
   versions where used.  Architectures that had local assembly
   routines are untouched (for those functions only).
 2002-02-19 13:08:12 +00:00
mjacob d76634e057 Update 2300 firmware to latest release level. 2002-02-19 01:38:04 +00:00
matt ae8db582d5 Add code to pass symbol table from loadfile to kernel. 2002-02-18 23:06:14 +00:00
christos e52b5e4bfb Resolve alpha compile issues: 
- bug with order in args in mask conversion md code.
- flags can be both int and long on the alpha. kludge around that, by not
  passing pointers to the conversion function.
- something is wrong with the toolchain look at the void * cast in copyout().
- sa_restorer is in a different place on the aplha. Deal with that, by not
  initializing it as before. XXX: this should be changed in the MD signal
  definition.
 2002-02-18 22:24:17 +00:00
bjh21 984f6cdf94 Revert my last change: GENERIC has more bogons than I'd hoped. 2002-02-18 20:55:55 +00:00
christos 1133f20b4f regen 2002-02-18 20:20:25 +00:00
christos 08739d68be provide linux_sys_getrlimit and linux_sys_setrlimit 2002-02-18 20:12:49 +00:00
bjh21 ea3b1622e8 Internal prototypes for loads of functions. 
Casts in calls to sc_setup_dma and sc_need_bump to match implementations.
__RCSID() while I'm here.
 2002-02-18 19:57:09 +00:00
bjh21 c44fd75edb Add prototypes for function pointers in struct esc_softc. 2002-02-18 19:55:01 +00:00
augustss 30981eee37 Add ulinear8 to/from slinear16 transforms. 2002-02-18 19:50:03 +00:00
bjh21 432b398217 Add internal prototypes for lots of functions. 
Add __RCSID() while I'm here.
 2002-02-18 19:22:14 +00:00
bjh21 ff94cc2ad5 Add prototype for getkey_polled(). 2002-02-18 19:05:35 +00:00
bjh21 d4d3aa6468 Add internal prototype for cmd_mouse(). 
Also __RCSID() while I'm here.
 2002-02-18 18:58:47 +00:00
jdolecek 2558157b0b Back off previous partially - make linux_release[] back 2.0.38 
and linux_version[] "#0 Sun Apr 1 11:11:11 MET 2000";". Add a BIG
WARNING MESSAGE so that people won't break things changing this.
 2002-02-18 18:51:51 +00:00
bjh21 eb821c3860 Add a prototype for qms_console_freeze(). 2002-02-18 18:43:55 +00:00
thorpej bf6823b1b5 Don't ask bootp() to put a "PXEClient" Vendor Class Identifier option 
in the DHCP request.
 2002-02-18 17:01:46 +00:00
christos 6e293e79bd regen 2002-02-18 16:36:20 +00:00
christos 7f739a6187 fix comment. 2002-02-18 16:35:57 +00:00
bjh21 23b31cf96e My acorn32 kernels now compile successfully without LOOSE_PROTOTYPES. 2002-02-18 16:34:13 +00:00
bjh21 1e6835687e Rename prototype from sysbeep_vidc() to sysbeep() to match definition. 
Pull in beepvar.h and vidcaudiovar.h for beep_generate() and
vidcaudio_beep_generate() prototypes.
__RCSID().
 2002-02-18 16:23:54 +00:00
simonb b5e0d320af Fix a null pointer dereference if curproc == NULL. 
Fixes PR port-i386/15638.
 2002-02-18 15:58:02 +00:00
yamt e3f53c00e2 fix indent 2002-02-18 14:45:56 +00:00
yamt 1486b3d395 add a missing splx in the case of error. 2002-02-18 14:41:50 +00:00
bjh21 2712a10c7c Add a prototype for vidcvideo_config_wscons(). 2002-02-18 14:30:20 +00:00
bjh21 468fff80ed Pull in <arm/arm32/machdep.h> for initarm() prototype. 
Change signature of initarm() to match the prototype.
Add prototype for canonicalose_bootconfig().
__RCSID() while I'm here.
 2002-02-18 13:53:29 +00:00
bjh21 03357551c5 Add a prototype for asc_dump(). 
Delete asc_dmaintr(): it's unused.
__RCSID().
 2002-02-18 13:19:54 +00:00
bjh21 77046b2b48 Add prototype for sbicdumpstate(). 
Add in-core RCSID.
 2002-02-18 13:15:15 +00:00
bjh21 8a8c12cfc9 Add prototypes for podulebusmatch(), podulebusattach(), podulebusprint(), 
podulebussubmatch(), podulechunkdirectory() and podulesncan().
Fix argument types of podulebussubmatch().
Remove podloader_read_region(), since it's not used externally.
 2002-02-18 13:11:07 +00:00
bjh21 761157905a Add prototypes to all declarations of function pointers. 
Include <arch/arm/iomd/vidcaudiovar.h> for vidcaudio_beep_generate() prototype.
Add in-core RCSID.
 2002-02-18 12:55:47 +00:00
bjh21 a06b71e864 Add a vidcaudiovar.h to contain a prototype for vidcaudio_beep_generate(). 2002-02-18 12:52:09 +00:00
bjh21 2aa99b4f12 Include <arch/arm/iomd/beepvar.h> for beep_generate() prototype. 
Include <machine/conf.h> for cdevsw function prototypes.
Correct argument types of beepioctl().
Add in-core RCSID.
 2002-02-18 12:36:27 +00:00
bjh21 668fc0d2b7 Add beepvar.h, to hold a prototype for beep_generate(). 2002-02-18 12:34:11 +00:00
bjh21 c1f8e3aa21 Comment out vidcvideo_setbase() (it's unused). 
Remove vidcvideo_mmap() (it's redundant).
Add in-core RCSID.
 2002-02-18 12:23:24 +00:00
bjh21 1a140d2090 Add prototypes for clockhandler() and statclockhandler(), and adjust their 
argument types to match other interrupt handlers.
Also minor KNF (add in-core RCSID).
 2002-02-18 12:18:26 +00:00
bjh21 40933bf05e Add prototype for yeartoday(). 2002-02-18 12:03:38 +00:00
bjh21 57a6aecd77 Include <machine/conf.h> for cdevsw function prototypes. 
Add internal prototypes for hexdectodec(), dectohexdec() and twodigits().
Correct signature of rtcioctl().
 2002-02-18 11:59:16 +00:00
bjh21 b5c13de9bf Pull in <machine/conf.h> to get prototypes for cdevsw functions, and correct 
the signature of iicioctl() appropriately.
 2002-02-18 11:51:57 +00:00
bjh21 216b4f1c81 Add prototypes for dma_reset(), dma_setup(), dma_isactive(), dma_isintr() and 
dma_intr().
 2002-02-18 11:41:18 +00:00
bjh21 dbc5effbc8 Change signature of dma_intr() to match other interrupt handlers. 2002-02-18 11:40:42 +00:00
jmc a10cd2d55f Print the tcode in hex when debugging like all other debug statements 2002-02-18 09:10:44 +00:00
uwe b7a9ca77f2 We are using shared headers from dev/ebus now. 2002-02-18 04:55:00 +00:00
uwe e158bed889 Switch to shared EBus headers in dev/ebus. 2002-02-18 04:52:26 +00:00
uwe 8598481f3c Convert to use shared headers in dev/ebus. Move ebus_softc definition here. 
Normalize bar field of EBus children PROM "reg" property to be the BAR
offset in PCI config space like on sparc64 when building ebus_attach_args.
 2002-02-18 04:50:57 +00:00
uwe d2be07c591 Shared ebusvar.h for sparc and sparc64. 
NB: ebus_attach_args member names are singular to be consistent with SBus.
sparc64 version uses plural, so update sparc64 drivers when converting them
to use this shared header
 2002-02-18 04:44:41 +00:00
uwe ea8decf111 Add DMA definitions. 
Add some sparc32 related comments.
 2002-02-18 03:43:29 +00:00
rafal 0208af27ee Regen: Use linux_sys_{g,s}setrlimit, remove linux_sys_ugetrlimit since 
linux/mips doesn't seem to have one.
 2002-02-18 00:10:26 +00:00
bjh21 943c65af59 Add prototype for stray_irqhandler(). 2002-02-17 23:58:35 +00:00
rafal 9751855fab the MIPS stat64 struct doesn't have a separate ino64 field, but the ino field 
is a u_longlong.
 2002-02-17 23:57:57 +00:00
rafal efdd3f2dd7 There is no linux_sys_ugetrlimit on mips, so don't try building it (XXX: adds 
icky ifdefs)
 2002-02-17 23:56:35 +00:00
rafal dfcb814799 Use linux_sys_{g,s}etrlimit() since there's a common implementation now; but 
MIPS has no sys_ugetrlimit, so don't declare it (209 is UNIMPL in the OSS
Linux-mips tree)
 2002-02-17 23:55:23 +00:00
bjh21 490dd78bcc cons_decl(com), to get prototypes. 2002-02-17 23:53:18 +00:00
bjh21 8eb5175b46 Add __RCSID(). 2002-02-17 23:47:56 +00:00
bjh21 63dc353d42 Add prototypes for lpt_port_test() and lptprobe(). 2002-02-17 23:45:29 +00:00
bjh21 ca677d0d06 Add a prototype for linux_syscall(). It should be in a header file, but 
other files that refer to it don't know its argument types anyway.
 2002-02-17 23:37:18 +00:00
thorpej 15bffcdeed Add a comment describing what SA_USE_LOADFILE is for. 2002-02-17 23:22:22 +00:00
thorpej 0d210931e3 Add a missing "static". 2002-02-17 23:19:00 +00:00
rafal 9f99fdabde Adapt for changes to linux_to_native_sigset() and native_to_linux_sigset(). 2002-02-17 23:18:38 +00:00
thorpej bf9a052aa4 Add EOFFSET. 2002-02-17 23:18:32 +00:00
bjh21 db030aa93f Add an lst_ino64 member to struct linux_stat64. 2002-02-17 23:18:11 +00:00
bjh21 0fd75dd4e5 Adapt for changes to limux_old_extra_to_native_sigset() and 
native_to_linux_old_extra_sigset().
 2002-02-17 23:05:08 +00:00
manu 457750dabf Implemented irix_sys_systeminfo() 2002-02-17 22:49:53 +00:00
bjh21 9e7faceaf4 Add LINUX_SA_NOCLDWAIT. 2002-02-17 22:45:29 +00:00
bjh21 d0dfca3108 Regen. 2002-02-17 22:30:22 +00:00
bjh21 e5087cd2b4 getrlimit and setrlimit now have Linux-specific implementations. Use them. 2002-02-17 22:29:46 +00:00
bjh21 6c9d7cafe8 linux_sys_break() is marked OBSOL, so don't include it. 2002-02-17 22:03:23 +00:00
bjh21 3113edfb9a linux_sys_rt_sigreturn is currently marked UNIMPL, so leave the stub out. 2002-02-17 22:00:09 +00:00
augustss 0786bd90ab Add another tlp card (found by trial and error). 2002-02-17 21:21:58 +00:00
augustss c8b7c9e3ba Regen. 2002-02-17 21:21:15 +00:00
augustss 9c5176e112 Add a 10/100 Ethertnet card from Hawking. 2002-02-17 21:20:46 +00:00
uch f0c9c394ec fix #ifdef condition 2002-02-17 21:02:16 +00:00
uch 000bb38949 SH3/SH4 common kernel support. 2002-02-17 21:01:15 +00:00
uch 6e0794b560 To determine CPU architecture and product, add cpu_arch and cpu_prduct variables. 
these are initialized by sh_cpu_init()@sh3/sh3_machdep.c
(see sh3/include/cputypes.h for detail.)
add "options SH3" for SH3 kernel config file.
 2002-02-17 20:59:33 +00:00
uch 14bcf8c92a add cache dump 2002-02-17 20:58:35 +00:00
uch a96c1d0e8f change register naming. 2002-02-17 20:58:02 +00:00
uch 70826aa2cd sh_cpu_init() is added. its initialize cache, MMU ops appropriately. 
machine locore code call this at first.
 2002-02-17 20:57:09 +00:00
uch 780de330ba Add new MMU API. for detail, see sh3/mmu.h's comment. 2002-02-17 20:55:50 +00:00
uch 779bf563f4 ANSIfy. remove #if 0 ... #endif. 2002-02-17 20:53:40 +00:00
uch 615800d782 Fix calling convention. r0-r7 are caller saved. 2002-02-17 20:53:01 +00:00
manu d383f72720 reworked signal handling: 
- do not save/and restore registers that should not be saved and restore
- do give an accurate sigcontext pointer to the signal handler
- do use the struct sigreturna from IRIX.
This eliminates panics and hangs in certain circonstances

Also some cosmetic changes with tabs usage
 2002-02-17 20:50:06 +00:00
manu 853adfc30b - implement SGI_GETSID command for syssgi() 
- reworked SGI_GETPGID implementation to use the getpgid() system call instead
  of duplicating it.
 2002-02-17 20:44:17 +00:00
bjh21 e6e848ef6d Our assembler handles FPA instructions fine, so don't use .word for them. 2002-02-17 20:41:02 +00:00
thorpej 77fa5a7974 Pay attention to the file name provided by the DHCP server, using 
it rather than the default of "netbsd" if it's in the reply.
 2002-02-17 20:14:08 +00:00
bjh21 00994a7564 Add prototypes for static functions. 2002-02-17 20:08:34 +00:00
thorpej 76ea45942b Cleanup of i386 bootloader building: 
* Add separate directories for the individual netboot ROMs and
  always build them.
* Each bootloader Makefile explicitly specifies the start file
  and link address it wishes to use.
* genprom becomes a proper host program.
* Make sure all generated files get cleaned up.
* Set BINDIR in Makefile.inc
* Add compressed image support to pxeboot.
* Make pxeboot use the default serial console speed (9600).
 2002-02-17 20:03:05 +00:00
bjh21 cb7a3d0674 ANSIfy, and othe KNF cleanup. 2002-02-17 19:53:44 +00:00
thorpej 45f23105c2 Make this compile again (update for changes to register bit names). 2002-02-17 19:49:58 +00:00
thorpej bb1c9c42fa Update for new location of the WD80x3 register description. 2002-02-17 19:47:41 +00:00
christos 6e89926d24 regen 2002-02-17 19:35:45 +00:00
christos 5a51f8945d fix rlimit confusion. 2002-02-17 19:35:30 +00:00
christos 8ec87caa7f ICANON is in lflags, by Neelkanth Natu 2002-02-17 19:34:42 +00:00
veego f12a3476e0 Add a missing ) from an 6 year old cleanup commit (rev 1.10): 
s/sizeof(struct mfcp_softc,/sizeof(struct mfcp_softc),/
Noticed by Nagilum on irc.
 2002-02-17 19:26:37 +00:00
martin 387b55cc79 Protect calls to wi_cmd() from callout handlers by proper splnet()/splx() 
pairs. Without this, the interrupt handler will steal the "command completed"
status and wi_cmd will busy loop until it times out.

Add some error output to make failure modes like this more prominent.

This should fix PR 14559.
 2002-02-17 19:24:18 +00:00
thorpej 58ff6aaf22 Regen: Add Genesys Logic GL641USB CompactFlash card reader. 2002-02-16 18:18:06 +00:00
thorpej bfdbf84cf8 Add product ID for the Gensys Logic GL641USB CompactFlash card reader. 2002-02-16 18:17:35 +00:00
thorpej 49cec2b141 * Remove a debug-breakpoint that is no longer needed. 
* Move the pxe_init() call to when we open the virtual netif.
* Make sure to call pxe_fini() when we close the virtual netif.
 2002-02-16 16:52:10 +00:00
thorpej 3285e44973 Regen: Add the Elan SC520 System Controller. 2002-02-16 16:36:36 +00:00
thorpej 1b6c81cacd Add the AMD Elan SC520 System Controller. 2002-02-16 16:35:48 +00:00
thorpej 0aec9f6508 Need private copies of these files for now. 2002-02-16 16:26:23 +00:00
christos 09a9c8ea3d 1. load cr2 now that we have it. 
2. ldt_info.base_addr == 0 && ldt_info.limit == 0 means zero the ldt
From Robert V. Barron's wabi patch.
 2002-02-16 16:23:09 +00:00
christos c8e246669c save cr2 for the benefit of linux emulation, and normalize use of pcb 
in trap(), i.e. always initialize *pcb and use it instead of doing it
sometimes.
 2002-02-16 16:22:03 +00:00
skrll 9e98a7e93d Enable ep* at pci here also. 2002-02-16 15:47:10 +00:00
is 372cac3316 The linux lkm doesn't compile anymore on m68k 2002-02-16 11:02:37 +00:00
mycroft 22d8cbc4f9 Make this build without akbd (again). 2002-02-16 08:30:27 +00:00
shin febef53a9c run cached and move fast. 
before	5 seconds
	after	sub second
 2002-02-16 05:26:02 +00:00
christos a7986989e7 Improve on fault signal translation. Inspired largely by Robert V. Baron's 
wabi patch.
 2002-02-16 05:19:26 +00:00
thorpej 8bb2be2987 Add a PXE boot loader. PXE interface code is derived by code 
written by Alfred Perlstein, Paul Saab, John Baldwin for FreeBSD.

Still needs some work, but this will load a kernel on a Soekris net4501.

Many thanks to Frank van der Linden and his simulator wizardry for
helping me debug the low-level startup code.
 2002-02-16 03:37:39 +00:00
enami 3528e53ca0 Use sizeof correctly. Fixes PR#15613. 2002-02-16 02:11:43 +00:00
enami 233c254079 - Wrap long line. 
- Remove unnecessary semi-colon.
 2002-02-16 02:07:56 +00:00
nathanw 382c2e0513 Add a bunch of PNP ID strings that are apparantly for the ESS chips. 
Snarfed from a Microsoft document.
 2002-02-15 22:06:50 +00:00
reinoud 309c1facde Create a .zip file next to the .tar file special for those Acorn folks who 
can download a free unzipper but dont have access to a .tar.gz file.
 2002-02-15 21:49:40 +00:00
is 92a181b637 Move Amiga PORT to ELF and new toolchain. Still missing: 
support in UPGRADE to move old shared libs to /emul/aout
 2002-02-15 21:28:03 +00:00
christos 57c8cc95f1 s/printf/uprintf/ 2002-02-15 20:02:56 +00:00
simonb fbaba2a978 Add a space after a comma in a few places (KNF). 2002-02-15 17:45:05 +00:00
skrll 45a18d6ff2 Remove redundant mov instruction. 
OK'd by Matt Thomas <matt@netbsd.org>
 2002-02-15 17:05:20 +00:00
christos b03c54f812 regen 2002-02-15 16:50:58 +00:00
christos 3a4f78636f Regen 2002-02-15 16:50:35 +00:00
christos 51ea9c87e7 proper comment. 2002-02-15 16:50:13 +00:00
christos 28debea38a - add a real linux_sys___sysctl because the mib numbers are different. 
implement only the kernel version getting entries.
- make the signal conversion functions consistent; dest is arg 1.
- make linux_fakedev deal with block and char devices differently.
- add linux_sys_ugetrlimit, and flesh out the regular get/setrlimit so
  that they work properly.
- add linux_mmap2 [untested].
- bump kernel to 2.4.18, and make the date be valentine's day :-)
- linux_sys_*stat64 family was totally busted. Fix it.

tested only on i386.

Status:
	gdb, telnet, work
	jdk-1.4.0 extractor works, jdk still coredumps.

christos
 2002-02-15 16:47:58 +00:00
simonb 14ac06f0bd Add a "show event" ddb command to show the event counters. 2002-02-15 11:18:26 +00:00
simonb 4eaa4d66a8 ANSIfy, KNF. 
Make some variables and functions static when not used outside of a module.
Make variables in headers extern.
Delete the unused db_find_watchpoint() function.
 2002-02-15 07:33:48 +00:00
simonb 4a188395df Make the ddb_regs declaration an extern in db_machdep.h and declare it on 
db_interface.c.
 2002-02-15 07:32:34 +00:00
augustss 77beb7e099 Use the correct years for copyright. 2002-02-14 21:58:30 +00:00
drochner c651007643 until the B-channel bookkeeping is fixed, do at least as much as necessary 
to get rid of bogus error messages
 2002-02-14 16:46:23 +00:00
drochner 29cc8db414 until the B-channel bookkeeping is fixed, do at least as much as necessary 
to get rid of bogus error messages
 2002-02-14 16:20:47 +00:00
drochner 3131bb3941 Reduce the "unknown protocol discriminator" message from "error" to 
"information". On my mixed Euro-ISDN/1TR6 line I get fooded otherwise.
 2002-02-14 16:17:05 +00:00
kent 46ffcfbf95 uaudio_set_params() for mulaw: 
Give priority to 16bit again in the case the device has no hardware
support for mulaw.
 2002-02-14 12:55:51 +00:00
augustss 4cb7d87b12 Oops, I messed up the last commit, try again. 2002-02-14 12:52:01 +00:00