is
d19d45b897
defopt Amiga graphics console options
1999-03-25 23:20:00 +00:00
is
f333be91dc
defopt Amiga graphics console options
1999-03-25 23:19:58 +00:00
thorpej
0193701fcd
Use ETHER_*_LEN constants from <net/if_ether.h> instead of defining them
...
ourselves. Subtract ETHER_CRC_LEN as necessary to get the same values
for these constants as were previously defined locally.
1999-03-25 23:10:53 +00:00
thorpej
962833e128
Use ETHER_*_LEN constants from <net/if_ether.h> instead of defining them
...
ourselves.
1999-03-25 23:10:13 +00:00
is
b30a4d19c0
Defopting grf_cc configuration parameters
1999-03-25 21:55:17 +00:00
is
35bbdd4cd2
AGA: VGAonly timing (GRF_AGA_VGA), by Adam Ciarcinski
1999-03-24 22:24:42 +00:00
mrg
d2397ac5f7
completely remove Mach VM support. all that is left is the all the
...
header files as UVM still uses (most of) these.
1999-03-24 05:50:49 +00:00
is
2ccf15e5f3
53c810A identification
1999-03-22 19:30:57 +00:00
is
605bbc6a31
ISDN Master II support added.
...
Actually, support for this has still to be added to the isdn4bsd release.
1999-03-17 21:44:18 +00:00
sommerfe
bc533621ed
defopt MINIROOTSIZE
1999-03-17 18:59:21 +00:00
is
ba07737bc0
Use the 1/256s-resolution when reading the DraCo battery backed clock
1999-03-14 22:42:12 +00:00
veego
58d4f7ae24
Add support for future PicassoIV's which use an autoconfig space of 64MB.
...
The framebuffer base address is then at a different offset.
The patch is from Klaus Burkert.
1999-03-14 09:17:19 +00:00
is
bed6716015
Identify the chip type when attaching.
1999-03-13 22:43:30 +00:00
is
a02a989bcf
The 53c720 and up are really different. For example, the method to determine,
...
when disconnecting etc., how much data were transferred, has changed.
Symptom: SIOP invalid instructions when doing data transfers to disks that
disconnect.
XXX The bits etc. need to be defined correctly in the siopreg.h file, and
symbolic values used.
1999-03-13 21:30:55 +00:00
is
48c33b2e56
Adjust to match the assembled code
1999-03-13 19:42:52 +00:00
is
d662e94812
fix some typos introduced when integrating the driver
1999-03-12 20:17:47 +00:00
is
5cbe57d881
Missing part of CS Mk. III changes
1999-03-09 20:31:34 +00:00
is
0fed7b2d06
The SCSI clock is 50 MHz for this board.
1999-03-09 20:25:46 +00:00
is
6505010dab
Added very preliminary version of Symbios 53c7[27]0c driver and Cyberstorm
...
Mk. III SCSI backend, by Michael Hitch.
XXX No wide transfers supported at the moment.
1999-03-07 22:16:19 +00:00
is
946db35c9b
Modifications to aucc.c for more input formats and 14bit stereo output.
...
By Bernardo Innocenti, submitted as PR 6787.
Some KNF-ifying done by myself, so you might want to blame me instead
if the original patch worked for you.
-is
1999-03-04 20:45:01 +00:00
is
27fc050f1d
Oops.
...
Forgot to commit this LONG ago.
1999-02-27 20:46:56 +00:00
is
2c7fa23c38
Fix Copyright dates
1999-02-16 23:34:10 +00:00
is
dc068e0d1f
Assign my files to The NetBSD Foundation, Inc.
1999-02-16 22:46:55 +00:00
is
93a62a003d
Wrong sign of dialout.
1999-01-31 10:30:22 +00:00
is
4d5a26ba82
Make this compile again. 1.5 was committed from the wrong directory.
...
We apologize for any inconvenience caused.
1999-01-10 19:19:57 +00:00
tron
560ed63047
Don't use void pointer for arithmetic.
1999-01-10 13:35:39 +00:00
tron
738cd778b3
Don't use void pointer for arithmetic.
1999-01-10 13:24:11 +00:00
tron
72a366c304
Don't use void pointer for arithmetic.
1999-01-10 13:22:05 +00:00
tron
a2885c9c15
Don't use void pointer for arithmetic.
1999-01-10 13:17:01 +00:00
tron
386665b0cb
Don't use void pointer for arithmetic.
1999-01-10 12:56:25 +00:00
tron
4920c92937
Don't use void pointer for arithmetic.
1999-01-10 12:37:17 +00:00
is
bc72f5a29c
Make it table-driven. Besides making adding more devices easier, the resulting
...
code is 14% smaller (alas, for this file only).
1998-12-26 22:22:58 +00:00
is
920aad33e4
Support for Hypercom 3+ / 4+. Untested yet, but its only some additional
...
entries in a table.
1998-12-14 20:33:45 +00:00
mjacob
74bc9f26d5
Update HBAs to incorporate the new max_lun property.
1998-12-05 19:43:33 +00:00
is
b36e0e66ff
Fix typo.
1998-11-28 14:46:53 +00:00
thorpej
5f0577babc
Adapt to the new scsipi_adapter interface.
1998-11-19 21:43:00 +00:00
mhitch
f6adcd4690
Some CyberStorm MK I SCSI modules use the same product ID as the Fastlane.
...
Add a check for that product ID and not a Zorro III address.
1998-11-14 21:48:22 +00:00
veego
17509cc037
Add the Ariadne II.
1998-11-11 22:28:32 +00:00
veego
1449b87b11
New driver for the Ariadne II.
1998-11-11 22:26:27 +00:00
frueauf
b1122614c3
Add braces to make egcs happy.
1998-11-05 14:13:59 +00:00
thorpej
29d472f53d
Garbage-collect the open_target_lu and close_target_lu entry points from
...
struct scsipi_adapter; they were not used.
Add a scsipi_ioctl entry point to struct scsipi_adapter. This will be
used to issue ioctl commands to the host adapters.
Inspired by PR #6090 , from Matt Jacob.
1998-10-10 00:28:28 +00:00
tron
8362affa14
Add a few "nop" instructions to make the memory size probe more reliable.
1998-10-06 22:26:42 +00:00
is
95807e512a
Garbage collect unused 3rd parameter to comprobe1().
1998-09-16 21:30:58 +00:00
is
0eb25ce882
Add support for Apollo-68060-board-reworked A3000 motherboards.
...
This is only tested on the original A3000...
1998-09-04 22:00:27 +00:00
is
a99b5503f1
Account for the 68060 store buffer.
1998-09-04 21:19:07 +00:00
is
a3ee69c87a
Split SMC chipset ARCnet driver into
...
- machine independent chip driver, in dev/ic/smc90cx6.c/...reg.h,...var.h,
using bus_space methods
- ZBUS frontend in arch/amiga/dev/if_bah_zbus.c
- added IPL_SOFTNET to arch/amiga/include/intr.h, for this
Implementing the ISA bus frontend is left as an exercise to the reader.
1998-09-02 22:32:06 +00:00
mhitch
1d7e0301d3
Quick fix for TS_WOPEN -> t_wopen change. Compiles, but I can't verify
...
that it actually works again.
1998-09-01 02:33:32 +00:00
mhitch
b741e97082
Quick fix for TS_WOPEN -> t_wopen change. Compiles and works.
1998-09-01 02:30:29 +00:00
is
9948205c5a
Prepare for support of Apollo-cpuboard-reworked A3000 mainboard SCSI.
1998-08-21 19:13:27 +00:00
augustss
cd09067eb4
* Redo the way the way the MIDI driver attaches to audio devices.
...
* Improve the midisyn layer a little.
* Add a driver for the Yamaha OPL[23] FM synths.
The opl driver is not finished yet; it sounds pretty awful.
For some strange reason I cannot get any FM sound from my SB64 cards,
but a regular SB16 works fine.
1998-08-17 21:16:09 +00:00
mycroft
a1ac68819f
Assign my copyrights to TNF.
1998-08-17 00:26:32 +00:00
mycroft
d07b3639a4
Assign my copyrights to TNF.
1998-08-15 17:47:15 +00:00
mycroft
6d3d8a1350
Make copyright notices with my name consistent.
1998-08-15 03:02:31 +00:00
is
f8dd65f3f5
Fix ommision in last backout.
1998-08-10 20:23:50 +00:00
is
c81476c89d
ISDN Blaster / Master: ZBus attachment / SUPIO driver.
1998-08-10 18:53:31 +00:00
is
e5439fc15b
Back out last change --- it doesn't work this way
1998-08-10 18:43:06 +00:00
is
878203d616
Cosmetics: it's a "HyperCom 3Z" on a ZBUS, no "HyperCom 3".
1998-08-09 22:25:18 +00:00
is
98f1a01dec
Actually probe the hardware.
...
This is for HyperCom 3i slaveboards (to be done soon) that might or might not
sit on top of a HyperCom 3Z or HyperCom 4 or ISDN Blaster.
1998-08-09 22:08:40 +00:00
is
8eebf1cfc5
yet more atomic operations accessing DraCo registers
1998-07-26 06:45:17 +00:00
is
0751419914
Back out previous change. It breaks Seyon in a non-obvious way.
1998-07-22 19:13:02 +00:00
drochner
49bb9d8214
adapt to LANCE driver split
1998-07-21 17:36:01 +00:00
is
6054d626f9
Switching dev/ic/lpt.c to use spllpt() instead of spltty(). It doesn't use
...
tty structures, and on some machines (namely the DraCo internal lpt, and some
multi-i/o boards for Amigas and DraCos), tying spltty to the pretty high printer
interupt level would hurt serial performance.
On all affected ports but Amiga, spllpt() has been defined in machine/intr.h
to be spltty(), thus preserving old behaviour. Portmasters are encouraged to
change is, if they feel something else is better (e.g., one of its own were
possible).
1998-07-18 21:27:25 +00:00
is
52ac5e203e
Precompute lots of bitmasks etc. in serparam(). Results in slightly better
...
(but I suspect, insignificant) performance, and also prepares for 8bit +
parity support.
1998-07-18 20:19:33 +00:00
mhitch
dc9188e3e1
Add UVM support to amiga
1998-07-10 20:23:24 +00:00
is
49ed29ab05
The INTF_RBF bit of INTREQ is mirrored in SERDAT. As we would read this
...
register anyway when the bit is set, we can safe one of the (slow) custom
chip accesses by using this bit.
Sounds ridiculous, but at a hardware FIFO depth of 1 and ~1 usec per
access (at IPL 5) it might help the highspeed addicts.
1998-07-07 16:46:38 +00:00
jonathan
011f2bda08
defopt NS, NSIP.
1998-07-05 06:49:00 +00:00
jonathan
3751946b97
defopt INET, NETATALK.
1998-07-05 00:51:04 +00:00
jonathan
466e784ee1
defopt DDB.
1998-07-04 22:18:13 +00:00
mhitch
65346d4042
Add memory disk.
1998-07-03 22:24:45 +00:00
is
8a8208f978
Synchronize shadow ciab.pra variable on first open.
1998-06-29 19:31:19 +00:00
is
1bec8366fd
Fix a problem with bogus hangups that Thorsten Frueauf has reported.
1998-06-26 17:50:20 +00:00
is
7a0f63f982
Back out the defopt for M680?0. As pointed out to me, this breaks ports which
...
dont use the M680?0 the way Amiga, Atari, Mac68k, and X68k do. I must have
missed this in the past discussion about this project.
1998-05-24 19:32:34 +00:00
is
6a6812fd92
Move M680[2346]0 to opt_m68kcpu.h.
...
XXX Some explicit dependencies could be removed now from the individual
arch/$ARCH/conf/Makefile.$ARCH files, but this is still to be done.
1998-05-23 20:51:06 +00:00
veego
8a9498f09a
Don't use an 'register char' as an array index, change it to an int.
1998-04-17 17:57:08 +00:00
veego
d15b06459b
Add missing int after an register.
1998-04-17 17:38:14 +00:00
is
4e23fff56a
Make ser.c compile again (preliminary release). It needs still a lot of
...
cleanup, but at least mainstream usage should be possible again (worked
for me 5 minutes ago).
1998-04-11 19:30:56 +00:00
is
da0b5bf913
amiga_ttyspl -> amiga_serialspl (and keep ttyspl constant at 4 again).
...
(Part of this change slipped in with my last machdep commit; thanks to
Matthias Scheler for pointing this out).
1998-04-11 18:28:33 +00:00
is
6c7f702633
- remove one level of soft interupt in the software autorepeat code
...
- WOPEN -> wopen
1998-03-25 22:14:13 +00:00
is
6e806b8115
This is no longer DraCo-specific (and hasn't been for a long time).
1998-03-22 17:16:33 +00:00
is
20251e62f9
Bug fix for the Ariadne panic: don't touch addresses outside the buffer we
...
got passed.
- analysis by Charles Hannum
- bugfix by Michael van Elst
- test by Thorsten Frueauf & Matthias Scheler
1998-03-09 17:00:33 +00:00
is
90e5d61467
Conditionally (on defined(DRACO)) compile new DraCo keyboard code sequences.
...
Pointed out by Bernd Ernesti.
1998-03-08 19:59:15 +00:00
is
eb3cda883b
Probe for the native DraCo (rekeycaped MF-II) keyboard, instead of guessing
...
it from the QuickLogic chip version byte.
If found, switch it to non-autorepeat mode (which seems to avoid the race
condition which made my keyboard driver / X server lose state under heavy
interupt load).
If not found, assume an Amiga keyboard on CIA-A.
XXX We should probe for the presence of the CIAs on the DraCo.
1998-02-28 21:53:15 +00:00
is
85c6760e2d
Initialize keyboard structures also from kbdopen(), if necessary.
...
To do this, move the flag variable to kbdenable().
This will make kernels with serial console provice a working keyboard driver.
1998-02-23 00:47:30 +00:00
thorpej
0b6e56ec02
Adjust for changes to config.
1998-01-12 10:39:01 +00:00
perry
b46484bb8a
RCSID Police.
1998-01-05 20:51:25 +00:00
perry
589a5e2c79
patch from is -- I don't know what it does, but he says it's critical.
1997-12-20 21:13:13 +00:00
mhitch
c9d1ca0df4
delay() is using calculated timing, so correct the delay during polled
...
SCSI wait to get a more accurate timeout.
1997-11-27 22:43:44 +00:00
is
a90ace971a
Workaround for the "xanim volume setting problem":
...
We play mono samples on all 4 channels.
However, we get the volume settings for mono samples as a symmetic two-channel
setting... the other two channels used to stay at max volume...
I believe that something else is wrong here, but dont want to change MI
code (which in turn influences a couple of MD driver) thus late in the release
cycle.
1997-11-24 21:00:50 +00:00
veego
0fe37675f7
Ups, forget a 'i'.
1997-11-23 23:26:03 +00:00
is
9360bfcc81
Remove remnants from ISA com console attachment code, which caused, due
...
to missing variable initialization, a panic on the DraCo.
1997-11-10 22:29:03 +00:00
is
ff1fd132f3
Forgot this yestereve: s/CV64CONSOLE/CV3DCONSOLE/
1997-11-10 12:17:20 +00:00
is
f31e12d69d
- recognize CV3D in Zorro-II mode.
...
- use board address space > 4 MB, instead of iszthreepa(), to detect Z3-mode
boards. We dont want the bus, but want the address configuration.
- s/CV64CONSOLE/CV3DCONSOLE/
- s/cv3d_zorroIII == 1/cv3d_zorroIII/ and s/cv3d_zorroIII != 1/!cv3d_zorroIII/
1997-11-09 23:30:47 +00:00
veego
6352bbdb7c
The Console driver works now.
...
Added some fixes for Zorro2 mode, but keep it still disabled.
1997-10-29 20:00:47 +00:00
mhitch
5b2fd76fd3
Don't rely on fixed padding to longword align the buffer used for non-aligned
...
transfers - compute aligned address when interface is attached. Fixes PR#4258.
1997-10-24 01:50:03 +00:00
mhitch
9bec32eefe
Check manufacturer and product codes correctly. The Blizzard 2060 driver
...
was trying to configure on a Cyberstorm MKI SCSI.
1997-10-24 01:43:49 +00:00
is
6c04d467ec
Make l different from |.
...
Downgrades PR 1998 from software bug to change request.
1997-10-21 12:29:30 +00:00
is
25d10d4369
zbus.c
1997-10-19 21:22:19 +00:00
veego
7017046979
New unit number for the CyberVision 64/3D.
1997-10-19 19:08:00 +00:00
veego
09b9eff341
Add an entry for the CyberVison 64/3D to the aconftab and to the
...
preconftab list.
1997-10-19 19:07:08 +00:00
veego
c9252fa879
First version of the CyberVision 3D driver. This driver is based on
...
the CyberVision64 driver. Modified by Tobias Abt with some bugfixes
from Bernd Ernesti.
ZorroII is at the moment not supported and there is a small problem
with the Console driver where you just get a black screen, but the
system boots and you can use X11 without a problem.
1997-10-19 18:55:21 +00:00