925077cfb9
Holy smokes, batman! Actually fill in the "init_card" entry point!
1998-10-27 22:45:13 +00:00
ffe41a4f8f
Remove unused sc_iot/sc_ioh fields.
1998-10-25 23:48:56 +00:00
d4e6677111
Replace architecture-dependent tag/handle field names with
...
architecture-independent versions.
1998-10-25 23:48:29 +00:00
6e73d89afc
PR/6274: John Ruschmeyer: Add isa/i386 ncr53c80 driver.
...
XXX: Needs work. We need to fix the probe/find goo, and add support for the
pas16 cards.
1998-10-25 18:41:56 +00:00
ee042cb008
Disable the I/O address, DRQ and IRQ validation; assume that the config file
...
is sane.
1998-10-15 04:05:53 +00:00
19fddaeeb5
Merge bouyer-ide
1998-10-12 16:09:10 +00:00
44d4d6a60a
Call correct ad1848 attach routine. Fixes PR 6269.
1998-10-11 17:02:36 +00:00
29d472f53d
Garbage-collect the open_target_lu and close_target_lu entry points from
...
struct scsipi_adapter; they were not used.
Add a scsipi_ioctl entry point to struct scsipi_adapter. This will be
used to issue ioctl commands to the host adapters.
Inspired by PR #6090 , from Matt Jacob.
1998-10-10 00:28:28 +00:00
bd7db8ba8a
Enable early probe stage printf's not by DIAGNOSTIC but more driver
...
specific macro constants.
1998-10-07 04:58:06 +00:00
b03b63aef4
Make these files compile again; no longer necessary to pass
...
iobase to comprobe1.
1998-09-18 14:38:48 +00:00
95807e512a
Garbage collect unused 3rd parameter to comprobe1().
1998-09-16 21:30:58 +00:00
ea4898c76c
Add arc as a target platform.
1998-09-11 19:39:28 +00:00
4f9a0d0550
Add mmap support for gus and gusmax, PR #5988 , Feico Dillema.
1998-09-09 04:40:34 +00:00
1247373b7a
Correct the remaining uses of ad1848_softc to ad1848_isa_softc
1998-09-06 13:03:49 +00:00
06f777a3fe
Debug output updates (Ezra Story; PR#6108).
1998-09-06 11:06:52 +00:00
7991c56b93
Use `ad1848_isa_{open|close}' (Ezra Story; PR#6108).
1998-09-06 11:05:21 +00:00
fc5e533cc2
Relinquish my copyright claim on this file.
1998-09-05 17:23:09 +00:00
c7a4282124
Assign copyright to TNF.
1998-09-05 14:12:36 +00:00
92707994ef
use ad1848_isa_attach, so GUS cards with CS4231 don't panic the kernel
1998-09-01 18:48:38 +00:00
d58173741d
kill the last remnants of __BROKEN_INDIRECT_CONFIG. (only the pica port
...
used it, and it's non-working and apparently slated for replacement.)
1998-08-31 22:28:04 +00:00
61cf67759a
make AUDIO_DEBUG work again
1998-08-29 22:49:48 +00:00
7972a062b0
Make the OPL driver attach directly to ISA as well.
1998-08-26 13:33:59 +00:00
8d64ea1683
Less debug printing.
1998-08-26 13:08:44 +00:00
bb3c56652c
Make the OPL driver turn on the sound on sound cards that require it.
...
That makes it much more likely that we get any sound. DUH!
1998-08-26 12:10:22 +00:00
2ffb54bdcc
Split the AD1848 driver into MI (dev/ic/ad1848.c) and ISA parts.
1998-08-25 22:34:29 +00:00
a48f7d8a24
Attach the OPL FM synth to the ESS driver.
...
It probes, but alas, no sound.
1998-08-25 12:52:47 +00:00
c7e036f6e2
Let opl attach to ess.
...
WARNING: it doesn't work yet.
1998-08-22 22:55:09 +00:00
915f1fe566
Add missing __P
1998-08-20 10:46:10 +00:00
0e6f209f9d
Add forgotten OPL file.
1998-08-18 17:56:39 +00:00
cd09067eb4
* Redo the way the way the MIDI driver attaches to audio devices.
...
* Improve the midisyn layer a little.
* Add a driver for the Yamaha OPL[23] FM synths.
The opl driver is not finished yet; it sounds pretty awful.
For some strange reason I cannot get any FM sound from my SB64 cards,
but a regular SB16 works fine.
1998-08-17 21:16:09 +00:00
d07b3639a4
Assign my copyrights to TNF.
1998-08-15 17:47:15 +00:00
62b1bf3e2e
Assign my copyrights to TNF.
1998-08-15 10:51:16 +00:00
6dc903202f
Assign my copyrights to TNF.
1998-08-15 10:10:47 +00:00
129cbf95ee
Minor edit.
1998-08-15 05:16:41 +00:00
b2827b9d36
Assign copyright to TNF.
1998-08-15 04:16:55 +00:00
df9baf2311
Assign copyrights to TNF.
1998-08-15 03:51:30 +00:00
6d3d8a1350
Make copyright notices with my name consistent.
1998-08-15 03:02:31 +00:00
183442fe73
Emulate ulinear_be using slinear_be on later chips.
1998-08-14 00:49:23 +00:00
f750a7d47e
device ess was listed twice
1998-08-13 04:53:18 +00:00
a2dd74ed79
Merge paddr_t changes into the main branch.
1998-08-13 02:10:37 +00:00
58e0098fef
Shut up after close().
1998-08-12 21:36:21 +00:00
5c76b6a944
The mic preamp is really a property of the input stage, and affects both
...
pass-through and recording.
1998-08-12 19:13:14 +00:00
b170caf730
Completely rewrite media selection. Add support for the MII/PHY on
...
the 3Com 3c905-TX and 3c905-T4. Fix handling of the MII on the
3c595-MII and 3c597-MII (can't talk to the PHYs on these cards; just
use "manual" for the external MII port).
Fixes kern/4782 (Chris Demetriou).
1998-08-12 18:51:52 +00:00
fa39959a5e
Add a MIDI driver for the PC speaker. This is mostly of hack value,
...
but, hey, lotsa people got a MIDI device now! (A truly pitiful one. :-)
1998-08-12 18:16:36 +00:00
881b4053a6
Remove some white space.
1998-08-12 18:15:04 +00:00
3979b06d00
enhanced -> preamp
1998-08-12 03:18:34 +00:00
1f5c14d8ef
ess_audio_channel:active is now used even when DIAGNOSTICS is not defined.
1998-08-11 12:16:22 +00:00
a6e73a5576
Actually set all the logical filter bits. Doh!
1998-08-11 05:57:40 +00:00
271d3df6f3
Fix an obvious bug that caused the multicast filter to always be all 0s.
1998-08-11 04:18:25 +00:00
8ba8e2056b
Remove unused field (sc_ih) in ess_softc (interrupt handlers are kept
...
in a per-direction structure).
1998-08-10 20:24:26 +00:00
b034eb97bf
Fix typo.
1998-08-10 20:02:48 +00:00
7fca135b1b
Use the new trigger interface.
1998-08-10 15:32:18 +00:00
060f81eb62
Minor change.
1998-08-10 02:19:18 +00:00
93703857ca
Slow down, Wilbur.
1998-08-10 02:13:44 +00:00
7514d511f7
Fix a typo I introduced in the MIDI code.
1998-08-10 02:12:30 +00:00
8d77cae1b4
For models prior to the SB16, there is only one clock divider, so couple the
...
sample rates. However, only do this if both play and record are being used
simultaneously; otherwise we can't play 22KHz on the SB1.
1998-08-10 01:25:33 +00:00
3dcff6581b
Use the new trigger_{in,out}put interface.
...
Also, even on the SB1, we can leave the DMA controller in auto-initalize
mode and just send a command to the board for each block. This may help
prevent FIFO underruns.
1998-08-10 00:20:39 +00:00
b4e0bf5dfb
Use 4- and 8-byte DMA transfers.
1998-08-09 06:52:57 +00:00
0611fc34f8
Don't actually touch the hardware in set_params; defer that until we actually
...
start a transfer. Instead, just check that the parameters are valid.
Also, use 16-bit output for u-law and a-law.
1998-08-09 06:38:30 +00:00
5eba82397c
Oops; fix typo.
1998-08-09 04:59:55 +00:00
017b9af5fe
Clarify with a specific reference to the manual page in question.
1998-08-09 04:58:08 +00:00
12f5a41e1f
Make the previous slightly more robust, and set AUDIO_PROP_INDEPENDENT.
1998-08-09 04:40:55 +00:00
c8532af3b2
Make sure the sample rate is the same on both channels, tracking the change
...
from one channel to the other if only one is active.
1998-08-09 04:14:47 +00:00
759ca5ee0c
The manual says to use the other crystal for 22050Hz.
1998-08-09 03:48:42 +00:00
565adbaffb
Set the FIFO control bits correctly so that stereo recording works.
1998-08-09 02:54:50 +00:00
80457a2c65
Use auto-initialize DMA for recording.
1998-08-09 02:05:52 +00:00
e2686d0a1b
Use splnet, not splimp.
1998-08-08 23:51:39 +00:00
c49235f44c
Use splnet(), not splimp().
1998-08-08 23:44:12 +00:00
254afcaecb
Sleeping forever kinda sucks.
1998-08-08 21:37:00 +00:00
17932f0575
Set the correct modes for the record channel.
1998-08-08 20:55:36 +00:00
558733ffc6
Track our carrier status and report it in the media status callback.
1998-08-07 05:55:14 +00:00
7b044dea51
Make the irq checking logic somewhat less bogus.
1998-08-07 00:51:06 +00:00
48bae9ee88
Add MIDI support. The MIDI devices can be accessed as ``raw'' through
...
the /dev/rmidiN devices, or with a sequencer interface via /dev/music.
So far the only supported MIDI device is the MPU401 port on SoundBlaster
(and only on SB on isapnp, since we do not have locators with multiple
values yet).
1998-08-07 00:00:55 +00:00
0c6791d804
Add macro to test iobase validity.
1998-08-05 16:40:22 +00:00
f76fb48283
Use looping DMA for play channel.
...
More cleanup.
1998-08-04 13:14:42 +00:00
ce69d417a2
Make it compile without DIAGNOSTIC
1998-07-31 23:54:09 +00:00
6b407a79c6
Major cleanup of the ESS driver. It now sorta works. More to come.
1998-07-31 15:17:17 +00:00
75db93cec2
Pull in files.isapnp here; the two busses are linked together quite closely
...
(more than we'd like maybe, but don't we wish ISA didn't suck...)
1998-07-31 04:40:39 +00:00
11c3d96b49
Flush spurious #endif after ADDMULTI
1998-07-31 01:10:13 +00:00
bf52ef5697
Squash unused variable.
1998-07-30 22:17:34 +00:00
ae2fb64e3a
Document supported boards near the top of the driver source code.
1998-07-30 21:28:15 +00:00
b7a585b61d
Use the previously committed pnp hook.
1998-07-30 18:03:34 +00:00
8bd9c69e11
Multicast support.
1998-07-30 16:40:19 +00:00
cdeb158d5f
A first stab at making the SHARK sound work. It doesn't really work
...
yet, but it probes and makes a noise when used. Stay tuned!
1998-07-30 14:11:42 +00:00
d6a8a4f025
Don't print chip name in attach, the ad1848 attach already does.
1998-07-29 11:39:25 +00:00
20f454ae1c
KNFify.
1998-07-28 20:58:39 +00:00
a374ab61d8
ic/i82595reg.h
1998-07-28 16:02:34 +00:00
4fb93c48ec
Remove dead code.
1998-07-28 14:44:46 +00:00
daed8d7ce1
Fix obsolete code in waiting for calibration on the ad1848.
...
(Sigh, the ad1848 driver should be rewritten.)
1998-07-28 12:13:34 +00:00
e3eed5f706
Fix cfattach naming botch.
1998-07-27 18:27:36 +00:00
0f7ec45c46
Add CS8900 Ethernet driver, and ISA front-end.
1998-07-27 01:22:41 +00:00
e9128957a6
ISA front-end for CS8900 driver.
1998-07-27 01:20:43 +00:00
f68dfbe928
Sigh, make this work with the i386 bus_space functions (which have debugging
...
glue in them, and thus subtle syntax quirks).
1998-07-27 01:20:19 +00:00
2d588abad8
Split up the Shark CS8900 driver into front-ends and core back-end (which
...
is here, since the chip can only live on an ISA bus; only the autoconfig
glue is different).
1998-07-27 01:08:51 +00:00
930937fd49
Define the CS8900 memory size, and macros to test for valid memory
...
base and IRQ.
1998-07-25 00:41:47 +00:00
658e297dd6
Initialize the new "dispoffset" (but don't use it for anything fancy).
1998-07-24 16:22:51 +00:00
8ba3494f9a
Deal with new pool code's changed API by rewriting this to not use pools.
...
Instead, use a manually maintained freelist in a second tailq.
Uses less data space, looks more symmetrical.
1998-07-24 03:29:29 +00:00
8d611b5f32
Remember the product ID and revision.
1998-07-23 19:25:52 +00:00
d2bc077edb
G/c a now unsed config flag.
1998-07-23 19:03:11 +00:00
c4c3297772
update comment ("John F. Woods" <jfw@funhouse.com>, PR kern/5798)
1998-07-23 16:39:24 +00:00
02ad0b4eda
Add support for ifmedia.
1998-07-21 22:58:31 +00:00
d3882c1b56
Define autonegotiation bits.
1998-07-21 22:27:33 +00:00
3db796d287
Define a couple more of the PacketPage registers.
1998-07-21 22:04:13 +00:00
88a0132aec
Correct the name of the CS8920M id, and fix some whitespace lossage.
1998-07-21 19:54:19 +00:00
49bb9d8214
adapt to LANCE driver split
1998-07-21 17:36:01 +00:00
3780fa036e
Add RCS IDs.
1998-07-21 07:48:36 +00:00
0611893e60
Move the cs8900 driver's softc, etc. definitions to an MI location.
1998-07-21 01:04:01 +00:00
0987caaee6
G/c unused definition.
1998-07-21 00:39:21 +00:00
a083bc2950
Split the CS8900 register description from the SHARK-specific header file,
...
and place it here.
1998-07-21 00:07:33 +00:00
3158aca613
Fix the name of the ulinear_be mode.
1998-07-09 02:26:55 +00:00
1b5fbe0b89
DRQ 4 is used to chain the two 8237s together. Make sure it's always
...
cascaded and that it will be unmasked when DMA is thawed after being
frozen. (This also has the effect of making sure that no device ever
erroneously gets DRQ 4.)
1998-07-08 05:23:23 +00:00
011f2bda08
defopt NS, NSIP.
1998-07-05 06:49:00 +00:00
3751946b97
defopt INET, NETATALK.
1998-07-05 00:51:04 +00:00
466e784ee1
defopt DDB.
1998-07-04 22:18:13 +00:00
b4d0730191
Cosmetic change.
1998-07-02 14:39:51 +00:00
85cca39e28
Add a monitor mute.
1998-06-30 16:54:52 +00:00
792ea056b9
Nuke unused variable.
1998-06-30 08:27:39 +00:00
fae3bf0887
Add a monitor mute. The mixer here really needs more work for the
...
Crystal chips.
1998-06-30 08:24:56 +00:00
3858cce05c
Recognize the CS4236B (although we don't yet use any of the extensions).
1998-06-30 07:45:22 +00:00
ad9b5bf5f0
Interrupt share type is EDGE.
1998-06-29 22:42:09 +00:00
3be1ffe6a0
When hooking up the interrupt handler, use an interrupt share type
...
specified by the front-end.
1998-06-29 22:40:56 +00:00
080dc567e8
A first stab at an ESS1887 driver. The code is from the SHARK port
...
and needs a lot of polishing. The code compiles (on i386), but is
untested. See ess.c for a TODO list.
1998-06-29 20:56:21 +00:00
ad3073beaf
Add an additional ISA DMA mode: LOOPDEMAND. This is for devices, such
...
as the Shark's CS8900 Ethernet, which want to use the DMA controller in
this mode (as opposed to single mode).
[Editor's note: committed from a Shark using a new bus_dma back-end
and a CS8900 driver converted to use the MI code :-]
1998-06-28 06:59:35 +00:00
91d0d98450
adapt to wsdisplay interface change
1998-06-26 21:07:03 +00:00
e997d4ac60
When writing packets to transmit buffers, do unaligned buffer fixups,
...
more-or-less lifted from the Shark CS8900 driver.
1998-06-25 19:21:03 +00:00
ab5b45577b
Don't panic if a DRQ is already allocated. Instead, just return EAGAIN
...
to indicate that the resource is unavailable.
1998-06-25 19:18:05 +00:00
0e1a83adc3
* Add defopt MCD_PROMISC for more conservative probes.
...
Before, the probe routine (mcd_find() would succeed even if the probe
code thought it had a response, but didn't recognize the ID-code byte.
Now, only do the promiscuous match if MCD_PROMISC is configured.
1998-06-23 03:26:18 +00:00
41af9f2ec7
Make PAS driver work again. From "John F. Woods" <jfw@jfwhome.funhouse.com>.
1998-06-22 17:21:34 +00:00
6c7fabb232
adapt to wscons interface change
1998-06-21 09:51:59 +00:00
1f8eca312d
Remove a bunch of totally unnecessary #include <machine/pio.h>
...
left over from the olden days.
1998-06-17 08:17:25 +00:00
651b44e211
Rework the way kernel include files are installed. In the new method,
...
as with user-land programs, include files are installed by each directory
in the tree that has includes to install. (This allows more flexibility
as to what gets installed, makes 'partial installs' easier, and gives us
more options as to which machines' includes get installed at any given
time.) The old SYS_INCLUDES={symlinks,copies} behaviours are _both_
still supported, though at least one bug in the 'symlinks' case is
fixed by this change. Include files can't be build before installation,
so directories that have includes as targets (e.g. dev/pci) have to move
those targets into a different Makefile.
1998-06-12 23:22:30 +00:00
08f2cdd7c4
clean up vga_isa_match() - always return "2" on success to make the
...
driver win over "pcdisplay"
1998-06-12 18:45:48 +00:00
d30382ffb4
Don't call isa_dmainit() when NISADMA == 0.
1998-06-11 08:29:33 +00:00
5bc2217a49
Nuke __BROKEN_INDIRECT_CONFIG.
1998-06-09 07:24:55 +00:00
680a3d77f4
Add isa_dma{freeze,thaw}(), used to temporarily stop and then restart
...
all ISA DMA. Needed by e.g. the SmartCard reader for Sharks.
1998-06-09 01:04:17 +00:00
5f97398507
Adjust for changes to the ISA DMA API.
1998-06-09 00:05:44 +00:00
ff76b8e96b
Change the ISA DMA API to take an isa_chipset_tag_t rather than
...
a struct device * corresponding to the ISA bus device. The ISA DMA
controller driver functions have been renamed and now take a struct
isa_dma_state *, and are called indirectly by machine-dependent code
which provides the DMA state.
These changes allow e.g. `ofisa' (the OpenFirmware configuration
mechanism for the ISA bus, used by e.g. Sharks) to use the MI ISA
DMA controller code.
1998-06-09 00:00:21 +00:00
914f235803
Fix the obvious bogons reported in PR#5552.
...
The problem in the memory size probe is still pending.
1998-06-08 12:19:46 +00:00
2b00a47b9e
Add ISAPnP attachment for PCMCIA bus controller; reorganize ISA
...
attachment to let it share code with PnP attachment.
1998-06-07 18:28:31 +00:00
68e0540ee9
Add an Aria sound driver.
...
From "R. C. Dowdeswell" <elric@imrryr.org>.
1998-06-06 10:12:34 +00:00
196bb746eb
Add a graphics device driver for wscons which supports legacy PC display
...
adapters. (minimal functionality - no virtual screens, no colors)
1998-05-28 16:51:50 +00:00
b84dbbb37c
Put definitions and subroutines needed for all PC display adapters
...
(MGA/GCA and compatibles) into global headers / source files.
Let the VGA driver use them.
1998-05-28 16:48:40 +00:00
7b4e205670
Use stream methods (when available) to read/write the card memory.
1998-05-25 10:36:51 +00:00
18319c0048
Changes so that these compile on NetBSD/alpha as well as NetBSD/i386.
1998-05-23 18:32:29 +00:00
aa04459121
KNF.
1998-05-21 19:17:50 +00:00
0b9ec50365
Add a newline.
...
KNF.
1998-05-21 19:09:28 +00:00
74545baf39
Add a Yamaha OPL3-SA3 driver and clean up all AD1848 drivers.
...
Submitted by Constantine Sapuntzakis <csapuntz@reeducation-labor.lcs.mit.edu>
and originally written for OpenBSD.
1998-05-20 16:19:41 +00:00
da5b8105bd
Remove BROKEN_INDIRECT_CONFIG relicts.
1998-05-05 21:41:18 +00:00
85c0eea04e
Suppress the diagnostic printout if the keyboard controller has no
...
mouse port.
1998-05-03 12:04:53 +00:00
ed1653232b
If the keyboard is console device, use the command byte as set by
...
the console initialization code.
1998-05-03 11:54:38 +00:00
e47f63efe6
Make some diagnostic output "#ifdef PCKBCDEBUG".
1998-05-03 10:02:11 +00:00
28454023cc
Add a comment about some future work.
1998-04-28 19:13:24 +00:00
d58832579d
Fix botched DMA tag initialization.
1998-04-18 10:26:56 +00:00
a099e8dda5
Initialize the command byte and its shadow register in early console
...
setup so that the keykoard driver can deal with scancode translation
in its console initialization function.
1998-04-18 09:42:20 +00:00
30654f3e89
Split out from if_le_isa.c - this card is quite different.
...
The driver is known not to work (timeout on send attempts).
1998-04-16 18:00:14 +00:00
02157092d4
Make the ISA LANCE drivers work without BROKEN_INDIRECT_CONFIG.
...
DEPCA is now split out into a separate driver.
Because there can be only one attachment of a device to a bus, for
each card type a separate pseudo-bus was introduced which attaches to "isa"
and where "le" attaches to.
1998-04-16 17:51:46 +00:00
0c199c88be
add MI ISA VGA and the speaker driver
1998-04-15 20:26:53 +00:00
2c823077d7
MI driver for the ISA speaker, and the IBM BASIC playstring interpreter
...
which has so many fans.
1998-04-15 20:26:18 +00:00
334ef5a59c
Fixup RCS IDs.
1998-04-15 01:45:43 +00:00
8c1b46c2f5
Remove the `delay port' stuff since nothing uses it anymore (can't reliably
...
use it on modern chipsets).
1998-04-15 01:44:23 +00:00
2eea6bd8a4
We can't trust the "delay port" anymore - it doesn't work as expected on
...
newer chipsets. Use delay() instead.
Being here, remove BROKEN_INDIRECT_CONFIG.
1998-04-07 16:23:19 +00:00
11da32b13c
Clean up diagnostic printouts.
...
Being here, remove BROKEN_INDIRECT_CONFIG.
1998-04-07 15:57:48 +00:00
848e8406bc
The fe driver is spilt into ate, fmv and mbe, and this file is no longer
...
necessary.
1998-04-03 04:46:46 +00:00
910e6420e0
Delete entry for fe*.
1998-04-03 04:44:39 +00:00
5d8b98c7b1
Use a 4-bit table to speed up the CRC even further, without increasing the
...
code size too much.
1998-03-29 23:02:27 +00:00
dbef68a11b
Update for __BROKEN_INDIRECT_CONFIG. Still untested since it is so hard
...
to find testers for these old cards.
1998-03-23 01:00:21 +00:00
3c346a45ca
The keyboard controller's address range is 5 bytes long - reflect this
...
here.
1998-03-22 15:44:02 +00:00
b5ec34f082
MI driver for the infamous PC keyboard controller, primarily for use with
...
the new wscons code (but may be interfaced with other drivers as well).
needs testing
1998-03-22 15:25:15 +00:00
065733619a
ISA frontend for sys/dev/ic/vga.c
1998-03-22 15:14:35 +00:00
52c701add6
Make this file compile without BROKRN_INDIRECT_CONFIG.
...
(Brute force - device probe always returns 0. Should be fixed soon.)
1998-03-22 12:50:20 +00:00
5aaf839bc3
Make this file compile without BROKRN_INDIRECT_CONFIG.
...
(Brute force - device probe always returns 0. The driver is replaced
by if_ate, if_fmc and if_mbe and is here for reference only.)
1998-03-22 12:48:41 +00:00
e26f2ce65b
Define new device `ate' and `fmv'.
1998-03-22 04:38:42 +00:00
2b5f7351d2
Split Fujitsu MB9696x based ethernet card driver into bus
...
dependent/independent code and bus.h'fied.
1998-03-22 04:25:36 +00:00
85687409e1
don't forget to set dma_arg, when using DMA functions. also, minor
...
spacing bogon cleanup. Pointed out by Kazuki Sakamoto in PR 5157.
1998-03-13 16:50:07 +00:00
09f43c63cf
Update probing for GUS a little. From soren@t.dk,
...
closes PR kern/5148.
1998-03-12 12:28:50 +00:00
d644f9b973
Apply cs4236 fix from rh@vip.at. Closes PR 5143.
1998-03-11 09:26:05 +00:00
a57a8d66ff
let panic() call DDB, don't do it ourselves; from Nathan Williams in PR 5131
1998-03-09 06:32:51 +00:00
775d60ecd7
Use lower case "agc" for consistency.
1998-03-04 19:38:28 +00:00
5ac38e9b53
Re-arrange several functions so we no longer need __BROKEN_INDIRECT_CONFIG
...
semantics.
1998-03-03 20:51:20 +00:00
5513bc639f
Cheesily work-around reliance on __BROKEN_INDIRECT_CONFIG; should we
...
bother trying to find the board's memory size in the match routine at all?
1998-03-03 20:50:06 +00:00
d8bb682673
drop `ef_softc' from ef_match function.
1998-03-02 23:12:18 +00:00
1fe6513796
Remove extraneous `$Id$' lines.
1998-02-28 20:43:28 +00:00
c0e247427a
This driver is replaced by three i82586 front-end drivers: `ix', `ef' and `ai'.
1998-02-28 20:42:43 +00:00
9698950530
* Remove `_NEW_I82586'.
...
* KNF.
* erase ghost spaces and tabs.
1998-02-28 01:14:15 +00:00
a3a9cbc8c5
Replace the `ie' driver by three separate front-ends: `ix', `ef' and `ai'.
1998-02-27 23:54:16 +00:00
22a8b1ae89
AT&T/StarLan i82586 front-end driver from Rafal Boni.
1998-02-27 23:52:34 +00:00
82153cc305
3Com/3C507 i82586 front-end driver from Rafal Boni.
1998-02-27 23:51:52 +00:00
9bb4839afd
EtherExpress/16 i82586 front-end driver from Rafal Boni.
1998-02-27 23:50:51 +00:00
ccfe537e97
don't include <machine/pio.h>. It's unneeded here now (this code
...
uses the bus_space_* interfaces), and therefore unwanted.
1998-02-24 02:12:09 +00:00
49c1580874
-make compile without BROKEN_INDIRECT_CONFIG
...
-don't include <machine/pio.h>
1998-02-23 14:12:18 +00:00
a7f7004e33
include an MD header if arm32. (No header yet, but there will be
...
one eventually.)
1998-02-17 18:27:10 +00:00
4399060ec9
- Perform all necessary bus_dmamap_sync() operations.
...
- Greatly simplify allocation and DMA mapping of the mailbox and ccbs.
- Be more robust against resource shortage errors, and report errors better.
1998-02-17 03:02:30 +00:00
8354e68508
Remove "class" declarations, and add "devclass" declarations where
...
appropriate. Fix several inconsistencies between device class and
attributes. Mostly from Chris Demetriou.
1998-02-16 22:12:45 +00:00
8abe76d2f0
Add offset and length parameters to bus_dmamap_sync(), used for specifiying
...
partial syncs of a DMA mapping.
1998-02-04 05:12:46 +00:00
a7c5c1ef3c
Add dm_mapsize to bus_dmamap_t and rename BUS_DMAMEM_NOSYNC to
...
BUS_DMA_COHERENT.
1998-02-04 00:32:55 +00:00
77b3a5be15
Put a debugging printf inside #ifdef IYDEBUG ... #endif.
1998-02-03 16:22:01 +00:00
1caaa1f520
PR/4883: Andreas Wrede: Check for wildcard mem address not io ports.
1998-01-31 11:23:35 +00:00
d411251c64
Fix for the vibra16x from Lennart Augusts: saying that the dsp4.16 was
...
a SB64 was just a guess. The vibra16x is really a sb16.
1998-01-30 11:55:36 +00:00
6f6593a533
Fix initialization and timing problem.
...
As per misc/4902, from Clifford Wright <cliff@snipe444.org>.
1998-01-30 02:02:38 +00:00
2538ed1062
Use offsetof() from libkern.h
1998-01-28 02:23:04 +00:00
thorpej