32692a53f2
Add kbc on news68k.
2001-01-31 10:48:18 +00:00
3c0c1146ac
Use a 16K receive buffer on the SEGA Dreamcast (XXX should be
...
done differently than it is).
2001-01-31 07:44:51 +00:00
56d0d6ce83
Match the SEGA Dreamcast Broadband Adapter, and use PCI memory
...
space on that device (XXX should be done differently than it is).
2001-01-31 07:44:04 +00:00
615bf08f21
Regen; add SEGA Dreamcast Broadband Adapter.
2001-01-31 07:24:58 +00:00
98182357a2
Add the SEGA Dreamcast Broadband Adapter.
2001-01-31 07:24:32 +00:00
eaeb1e44f5
Ad umidi.
2001-01-31 04:17:27 +00:00
6c60c9ff82
initial commit of USB midi driver.
...
- I tested only ROLAND UM-1 and YAMAHA UX256.
These are not conforming to USB-MIDI spec, however these are
similar to USB-MIDI.
- Since I've not yet seen the "genuine" USB-MIDI device,
I cannot test such devices although I wrote the codes for it.
TODO:
- clean up the codes.
- umidi(4) manpage.
- /dev/rmidi? is working well, but /dev/music seems not working correctly.
2001-01-30 23:26:47 +00:00
61250c9635
some changes for midi_start_output() under PROP_OUT_INTR devices.
...
- protect the buffer even though ointr occur until exiting
from hw_if->output().
- allow this function to send multiple bytes to hw_if->output()
at the same time. it's necessary for umidi.
2001-01-30 23:02:18 +00:00
4e7ff09e27
Make sure to clear sysmon_armed_wdog once the watchdog timer
...
is disarmed.
2001-01-30 22:24:31 +00:00
9710d432c2
Power management support for the CardBus Etherlink XL cards.
...
From Masanori Kanaoka <kanaoka@ann.hi-ho.ne.jp>.
2001-01-30 19:27:39 +00:00
57789d81c3
Regen.
2001-01-30 15:04:45 +00:00
9385e3019d
Add Abocom URE450 Ethernet adapter.
2001-01-30 15:04:23 +00:00
e08982d234
add uplcom_{open,close}
...
it only reset routine yet.
2001-01-30 13:17:43 +00:00
5ce651390d
Fix problem where tsleep() is used not on the cardbus thread.
...
This change makes PCMCIA cards work again on my machine.
Unfortunately, some of the DELAY_MS() are called when the current
process is not the cardbus thread, that is, on interrupt contexts.
I confirmed these are actually used in interrupt context and replaced
them with delay()s. However, I haven't confirmed other DELAY_MS()s
are always on the cardbus thread.
This shall be a temporary fix. The driver needs being rewritten
not to use such delay()s, of course.
2001-01-30 07:23:14 +00:00
013511e442
Use ether_crc32_be() for multicast hash calculation.
2001-01-29 12:04:10 +00:00
f83bca2bbb
Contec FLEXLAN/FX-DS110-PCC work
...
reported by Shingo WATANABE(nabe@nabechan.org )
2001-01-29 11:26:28 +00:00
4d076b5e9b
regen
2001-01-29 11:23:43 +00:00
012109227d
add products
...
Contec FLEXLAN/FX-DS110-PCC wavelan card
2001-01-29 11:23:13 +00:00
2c218a4926
Handle allmulti case correctly as a NetBSD network driver;
...
if we are requested range of multicast address or too many multicast address,
program multicast filter to receive all multicast address. And set/clear
IFF_ALLMULTI flag properly.
2001-01-29 01:24:42 +00:00
e6de2c6337
Commit second half of rate limit change.
2001-01-28 19:01:20 +00:00
a96a3fa4ca
Put a rate limiter on the scheduling overrun message.
2001-01-28 16:18:09 +00:00
5e870d500f
COMPAQ Agency NC5004 Wireless Card(Prism2) work.
2001-01-28 07:18:40 +00:00
afeced92a0
regen.
2001-01-28 07:15:07 +00:00
b74006da99
add product id
...
COMPAQ Wireless Card NC5004(Prism2)
2001-01-28 07:14:47 +00:00
1225c5883f
USB-RSAQ work
...
but this product was discon.
2001-01-28 03:44:46 +00:00
d460e9b43e
Minor grammar/spelling fixes in comments.
2001-01-28 01:49:54 +00:00
cc2a28f2c0
Un-'__P'ify.
2001-01-27 20:42:20 +00:00
1949425ffc
Nuke some bogus debug code that was already '#if 0'ed out.
2001-01-27 20:18:55 +00:00
e6d8ca0dee
Cosmetic cleanup of some comments, and nuke an unused #define.
2001-01-27 20:10:49 +00:00
75ea8b428e
Having moved some of the bits needed by raidctl into rf_configure.c, we
...
no longer need those bits here. In particular, this file is now only
used in the kernel, and that allows us to clean up a lot of cruft.
2001-01-27 19:34:43 +00:00
532934d5f1
ANSIfy.
2001-01-27 18:53:33 +00:00
d13e6a84f2
Sleep a little when closing the midi device to allow the UART to drain.
2001-01-27 18:37:01 +00:00
c501a146a0
regen
2001-01-27 13:19:48 +00:00
be66040d49
add product
...
I/O DATA USB-RSAQ(discon.)
2001-01-27 13:19:27 +00:00
3edd34f0be
More #if's. This needs some serious rototillage, but a few #if's will
...
suffice for now.
2001-01-27 02:13:34 +00:00
22189b442b
Add a few siop_table_sync() calls.
2001-01-26 22:00:01 +00:00
05b5119cdf
Fix a 4 byte ovferflow in an array:
...
resel[sizeof(load_dsa) / sizeof(load_dsa[0])] is 25, not 24.
2001-01-26 21:58:56 +00:00
01c89cec5c
No need to submit before poll any more.
2001-01-26 19:53:15 +00:00
c4a426333f
My.. what a twisty little maze of #defines and dependencies. Some of this
...
code is used for more than anticipated, and I missed a few checks last
night. Thanks to Bernd Ernesti for poking me about this.
2001-01-26 14:06:16 +00:00
cf9b8e8210
Contribution by Ryoji Kato: I-O DATA IFML-560 56K modem device ID.
2001-01-26 11:04:20 +00:00
2b15bcc35b
Contribution by Ryoji Kato: I-O DATA IFML-560 56K modem support.
2001-01-26 11:02:18 +00:00
6939097e75
Add left/right reversal quirk entry for Toshiba Protege 7020
2001-01-26 10:04:43 +00:00
30dcc3b36e
regen
2001-01-26 10:04:12 +00:00
2f324bf9a0
Add Toshiba Protege product code
2001-01-26 10:03:47 +00:00
8ec736c069
Add quirk for Compaq Armada M700 to fix left/right channel reversal.
...
Quirk entry provided by Joachim Koenig-Baltes <koenig@cms.tecmath.com>
2001-01-26 09:22:18 +00:00
095bcc2e62
regen
2001-01-26 08:04:40 +00:00
f6dbeb0440
Add product code for the Compaq Armada M700 Notebook
2001-01-26 08:02:46 +00:00
e47b177bc0
Nobody calls these bits if we arn't doing RAID5 with rotated spare stuff.
...
Add an #if.
2001-01-26 05:16:58 +00:00
1763f954c7
These bits are only needed for the interdecluster stuff.. wrap them
...
with an #if.
2001-01-26 05:09:13 +00:00
7833c33e99
Whoops.. Leave them on.. (for now.)
2001-01-26 04:43:16 +00:00
a40eef11ac
Give the parity declustering code their own 'RAID arch' types, and
...
allow us to turn them off if desired.
2001-01-26 04:40:03 +00:00
61a2ee28fb
Lots of stuff here that is only used for some of the 'fancier' RAID types.
...
Don't compile it if we arn't going to use it.
2001-01-26 04:27:16 +00:00
bcc70a3f37
Clean up some INDENT warnings. (yes, these have been there for a while!)
2001-01-26 04:14:14 +00:00
0a5ca1547d
Various parts of this file are only needed by the even/odd and PQ
...
RAID types. Don't include those bits if we arn't doing even/odd or PQ stuff.
2001-01-26 04:05:08 +00:00
9880e186ec
Don't build the stuff in this file if RF_INCLUDE_EVENODD is not defined.
2001-01-26 03:50:53 +00:00
c77d3c20a8
Ensure we update the 'partitionSize' field of the component labels
...
when doing a reconstruct or a copyback. If we don't, junk might be
there, and that could cause the component to be not correctly
autoconfigured on reboot. Thanks to Simon Burge for helping track this down.
2001-01-26 02:16:24 +00:00
b8569c0b8e
The previous revision was my fault. audio_calcwater() needs to be
...
called at every open.
Thanks Witold J. Wnuk for pointing out this problem.
2001-01-25 15:25:34 +00:00
b2457f9a76
Move NEWS keymap file into MI place to share with news68k.
2001-01-25 13:13:59 +00:00
fa52d46203
more datasheet
...
but same...
2001-01-24 14:46:49 +00:00
c54894efe9
IMPROVEMENT: use tsleep() instead of delay(). Kernel do not stop
...
during card insertion, deletion and power change.
2001-01-24 10:10:04 +00:00
840a1d7e2b
Fiddle enough with the tty so that it wakes up on detach and drops
...
the reference count on the ucom.
2001-01-23 22:06:25 +00:00
4b0119383e
Ad support for an extra message in the ucom attach code.
2001-01-23 21:56:17 +00:00
0156530592
Null out pointers when closing pipes.
...
Try to wake upper layer on error.
2001-01-23 21:22:57 +00:00
af1fabe1bc
There are more ports than meet the eye on the Visor. Connect a ucom
...
to each of them.
2001-01-23 21:19:44 +00:00
7bb669ca3e
Fix up license.
2001-01-23 20:51:01 +00:00
c5fe587d24
Oops, be sure to clear the ATTN interrupt on error.
2001-01-23 20:47:02 +00:00
10ca4fd232
cause the "delete" key to actually send \177 like it used to
...
(and still does with pccons) rather than \033[3~ ...
2001-01-23 19:25:14 +00:00
82a01b7eeb
Regen.
2001-01-23 19:24:19 +00:00
af31089a6d
Re-add $FreeBSD$ RCS Id for the purposes of synchronization tracking.
...
This is not unprecedented, as we do it in >100 places in the tree.
If you disagree with this philosophy, take it to tech-kern for a discussion
FIRST before reverting; TNF, not one particular person, owns this file.
2001-01-23 19:24:00 +00:00
23cffa82c7
Rearrange detach code so it is more likely to survive detaching an open
...
device (it's still not waking up readers properly).
2001-01-23 17:35:58 +00:00
f11510dd0a
add missing Weasel command.
2001-01-23 17:18:23 +00:00
5e8cefc2ea
Ad function to remove a usb task.
2001-01-23 17:04:30 +00:00
a88f037c70
MAke USB_DEBUG turn on UVISOR_DEBUG.
2001-01-23 17:03:19 +00:00
cbda952879
Make sure driver attach/detach events are generated in a consistent manner.
2001-01-23 14:04:13 +00:00
7fd4b01030
Change matching condition (we don't want to match on interface for this
...
type of device).
Don't generate a device detach event since there's no attach event.
Minor cosmetic changes.
2001-01-23 13:48:06 +00:00
51ee272c28
simple datasheet
...
http://www.nisseisg.co.jp/jyouhou/_cp/@gif/2303.pdf
but not include register :<
2001-01-23 10:10:22 +00:00
2b4a1ad203
increase size of UPLCOM{I,O}BUFSIZE
...
enabe uplcom_break
2001-01-23 08:15:58 +00:00
bcb0a27722
Regen; added Xircom CreditCard Token Ring II.
2001-01-23 05:42:43 +00:00
ad4bfb4606
Add Xircom CreditCard Token Ring II (woo, I found my card!)
2001-01-23 05:42:12 +00:00
db3f510ee6
s/2000/2001 :-)
...
and typo.
2001-01-23 02:36:17 +00:00
3a36335ddf
Don't turn on the dubug flag by default.
...
Don't print interface class/subclass; it's pointless since the device
doesn't follow any standard class definition.
2001-01-23 02:25:02 +00:00
d324979aed
Add uplcom.
2001-01-23 02:18:30 +00:00
1227a240f1
driver for Prolific PL2303 serial adapter.
...
I/O DATA USB-USAQ2 work.
2001-01-23 01:24:10 +00:00
fe3273fbb4
Patch from PR kern/8001, submitted by Rafal Boni.
...
This adds support for EtherExpress/16 cards with 16k of RAM, and in the
process adds general support for PIO mode on these cards. This entails
changing the way the i82586 driver handles bus barriers, since it doesn't
allow for strange cases like this.
This has been tested on the i386 port with the 'ix' driver in both
16KB (which was the source of the problem) and 32KB modes, as well
as with the 'ef' driver. I've tested it (briefly) with 'ei' on arm26
as well. In theory, drivers other than 'ix' should follow precisely the
same code paths as before.
2001-01-22 22:28:43 +00:00
e055513a28
Nuke useless argument to ld_twe_dobio().
2001-01-22 21:56:11 +00:00
69fd9caaae
Don't IFQ_SET_READY() -- this driver isn't ALTQ'ified.
2001-01-22 21:38:35 +00:00
7575649e53
Minor optimisation.
2001-01-22 17:44:28 +00:00
03463e18f1
opt_twe.h isn't needed any more.
2001-01-22 17:40:14 +00:00
8771c04bd1
Don't artificially clamp the maximum number of outstanding commands.
2001-01-22 17:38:23 +00:00
9c7e523b64
- Complain if interrupt-driven retrieval of AENs fails somehow.
...
- Clamp the number of outstanding commands to 129.
- Other tweaks.
2001-01-22 17:32:11 +00:00
9e7736f1dc
make patches[] const
2001-01-22 14:30:43 +00:00
29d563fd5b
regen: US Robotics (3Com) 56K Voice Internal PCI Modem (WinModem) entry added
2001-01-22 14:18:42 +00:00
0f1dba40c7
add US Robotics (3Com) 56K Voice Internal PCI Modem (WinModem) entry
...
I wish I'd been less foolish and not bought this device ...
2001-01-22 14:15:24 +00:00
5d9e997522
Regen for stallion.
2001-01-22 13:58:37 +00:00
c77d1a22c4
Add stallion products.
2001-01-22 13:57:54 +00:00
577ac6e31c
Remove the line in audio_open which zeroes sc_[pr]r.blksize.
...
Because zeroing them causes zero division panic with devices which don't
support 8kHz mulaw, and the effect of this line was to force calling
audio_calcwater even when unnecessary.
2001-01-22 08:37:54 +00:00
f2d987f8a4
Force certain commands (i.e. DVD authentication) to PIO mode. They are
...
explicitly not supported in DMA mode, and generally return an `illegal field
in CDB' error.
This should have been done ages ago.
2001-01-22 07:00:39 +00:00
135068fdc8
Add clct.
2001-01-22 02:22:35 +00:00
972d156775
Clean up a little.
2001-01-22 01:44:56 +00:00
45116f2c38
Add clct driver for Cirrus Logic CrystalClear PCI Audio CS4281.
...
Driver written by Tatoku Ogaito.
2001-01-22 01:34:42 +00:00
22a541e778
Add a comment.
2001-01-22 01:13:47 +00:00
7090ce901d
Defer stopping the interface on error to a process context.
...
XXX The cue changes have not been tested, since I don't have a cue adapter.
2001-01-21 22:09:23 +00:00
dfa2282053
Change watchdog routine. (From FreeBSD.)
...
The only thing stopping us from getting totally rid of the evil
USBD_NO_TSLEEP hack is the (broken) assumption in the MII driver that
registers can be read and written without a process context.
2001-01-21 19:42:29 +00:00
2a7443922d
Get rid of `#ifdef FreeBSD'; they maintain their own version.
2001-01-21 19:36:31 +00:00
aa75661373
Use the new usb_add_task() call to execute the statistics gathering.
...
This gets rid of the evil USBD_NO_TSLEEP hask from the cue driver.
2001-01-21 19:30:35 +00:00
996efaa78c
Ad a comment.
2001-01-21 19:00:29 +00:00
df20cb2972
Change the operation of the USB event thread. Before it only performed
...
USB device discovery, now it can also perform (short) tasks for device
drivers that need a process context, but don't have one.
This is not pretty, but better than using busy-wait in an interrupt context.
2001-01-21 19:00:06 +00:00
d8f68f3949
Add a quirk for devices that cannot handle full length INQUIRY.
...
From FreeBSD.
2001-01-21 18:56:38 +00:00
8502ed9498
Remove `#ifdef FreeBSD'; they maintain their own version.
2001-01-21 16:55:11 +00:00
3966e66ec8
Untangle some spl-spaghetti in cy_modem_control().
2001-01-21 16:55:10 +00:00
e391b64407
Change watchdog code (from FreeBSD).
2001-01-21 16:06:48 +00:00
1d6d81b317
Get rid of `#ifdef FreeBSD'; they maintain their own version.
2001-01-21 16:03:11 +00:00
25c15e3189
Regen.
2001-01-21 15:58:01 +00:00
f4f53b10ea
Another hub.
2001-01-21 15:57:41 +00:00
b2245c50fc
Several changes:
...
* Get rid of `#ifdef FreeBSD'; they seem to maintain their own version.
* Change watchdog code (from FreeBSD).
* Get rid of the horrible USBD_NO_TSLEEP hack.
* Repair some const damage.
2001-01-21 15:55:05 +00:00
0906d8d1fe
Rasops supports 4bit depth.
2001-01-21 13:50:58 +00:00
e8db629494
Add code to use soft interrupt to handle USB interrupt processing.
...
Don't enable the code since it doesn't work with the kludgy Ethernet drivers.
2001-01-21 02:39:52 +00:00
0c40fe5115
Ad define for warm boot rev.
2001-01-21 02:35:31 +00:00
29984607e8
Trim space off both ends of device product and vendor strings.
2001-01-21 02:34:34 +00:00
8894e84df0
Use a better way to test if we are cold starting the device. (From FreeBSD)
2001-01-21 02:33:52 +00:00
60708ce539
Regen.
2001-01-21 02:28:55 +00:00
27293db05d
A couple of new devices (from FreeBSD).
2001-01-21 02:28:30 +00:00
227c27096f
Add some initialization to struct ifnet that seems to have become
...
necessary.
2001-01-21 02:22:27 +00:00
1aca8405a5
Cosmetic changes.
2001-01-21 00:07:13 +00:00
f7dc96fe4c
Change some splusb() to splhardusb().
2001-01-20 23:36:02 +00:00
541fa6ecfa
regen
2001-01-20 20:53:34 +00:00
2d5b0a4ff5
typo fix
...
reported by kei_sun@ba2.so-net.ne.jp
2001-01-20 20:53:07 +00:00
13ad8f5ba7
Pack the minor numbers like the Cyclades-Z driver does, and
...
make the dialout bit compatible with the other serial drivers
(and with what MAKEDEV generates for dtyCYxxx).
2001-01-20 19:29:05 +00:00
3aef368a04
Use device_lookup() in cztty_getttysoftc().
2001-01-20 19:10:36 +00:00
ddbaea62cb
Garbage-collect some unused macros.
2001-01-20 19:08:24 +00:00
9eefbe5b74
Regen; there is absolutely no point in having a FreeBSD RCS ID in this file.
2001-01-20 17:04:03 +00:00
7ad2150248
There is absolutely no point in having a FreeBSD RCS ID in this file.
2001-01-20 17:03:32 +00:00
ce1c8f1a25
Regen.
2001-01-20 08:50:30 +00:00
da5294450d
In 1.111
...
> o Add RATOC REX_R280 card.
Since this already exists in pcmciadevs, delete it for preventing compile error.
2001-01-20 08:49:53 +00:00
1d15673dae
consistently use FE_DEBUG (DEBUG was used a couple of places where it
...
was obvious that FE_DEBUG should have been used instead)
2001-01-20 07:31:00 +00:00
6549452c38
Don't deref NULL when searching for the correct board.
2001-01-20 04:19:21 +00:00
c38c39fc9b
Only need to pass a cy_softc * to cy_attach().
2001-01-20 02:26:39 +00:00
44ff75e3c5
ANSI'ify.
2001-01-20 02:24:16 +00:00
a0f7017e2e
Clean up the PCI attachment a bit, and adjust the other pieces
...
to suit.
2001-01-20 02:15:01 +00:00
cd3120ae66
Sync to pcmicadevs 1.111
2001-01-20 01:58:12 +00:00
d93492c616
Sync file with FreeBSD 1.8:
...
o Add NAKAGAWA METAL's LNT-10TN card.
o Add KINGSTON KNE-PC2 ethernet card.
o Add RATOC REX_R280 card.
o Add $FreeBSD$ id.
I've not added these cards the their respective drivers, however.
2001-01-20 01:56:16 +00:00
905ef1b7fa
Use the SCSIACCEL ioctl() to turn on TAG QUEUEs.
2001-01-19 23:04:23 +00:00
4a962c6cd9
Retry requests if the CD-ROM drive returns the sense code "Device in
...
Process of Becoming Ready".
2001-01-19 22:47:46 +00:00
28899ce913
Add another CIS variant for ELSA mc/isdn card
2001-01-19 20:04:07 +00:00
88e7f62500
regen
2001-01-19 17:28:58 +00:00
ee8a058b1d
add USB serial adapter
...
I/O DATA USB-RSAQ2 (use PROLIFIC PL2303 chip)
2001-01-19 17:28:15 +00:00
0f589a40df
Nuke all uses of splimp() in the isdn subsystem, replace by splnet().
2001-01-19 12:44:44 +00:00
e07a5ff574
constify
2001-01-19 08:54:21 +00:00
b4ef15f3bc
- paint underline on text honouring WSSCREEN_UNDERLINE.
...
- use accellerated painting for text cursor, should improve speed.
2001-01-19 05:43:43 +00:00
79c6c8ec3f
Make this compile again after const-ification.
2001-01-19 04:01:10 +00:00
tsutsui