Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
25,645 Commits 606 Branches 0 Tags 3.1 GiB
37986aa09a
Commit Graph

1084 Commits

Author SHA1 Message Date
briggs
51d658e787 Check to make sure that ASCBase is accessable before claiming that we 
have an Apple Sound Chip.  Make sure that we have configured the device
before allowing accesses to ASC memory.  Among other things, this
prevents the 660AV and 840AV from getting a kernel bus error when trying
to beep on the console.
 1996-11-09 17:26:26 +00:00
briggs
f75767628e Dump out type, code, v on panic for no pcb in trap(). 1996-11-09 15:36:14 +00:00
cgd
8a3333b2a9 Fix an inconsistency that came in with Lite: setrq() was renamed to 
setrunqueue(), but remrq() was never renamed.  Rename remrq() to
remrunqueue().
 1996-11-06 20:19:19 +00:00
scottr
047ae9a04d LC III+/Performa 460 series use same vectors as the LC III. 
Verified by Bob Nestor and Pete Nush.
 1996-11-05 07:20:09 +00:00
briggs
bbd25d0c38 - Move offset for 2nd scsi controller (Q900/Q950/WGS95) to 0x402 
instead of 0x400.
- Restructure interrupt handling for more performance--continue to
  read/write data as long as the device keeps us in a data xfer phase.
  There is still a lot of room for speed improvement here.  Perhaps it
  lies is speeding up the interrupt path in general?
 1996-11-04 21:20:01 +00:00
scottr
9da963b048 Remove include of ncr96scsi.h, since it's now an artifact, and the 
unused include of ncrscsi.h while we're here.
 1996-11-02 07:18:53 +00:00
briggs
7685e9d70b Improve reliability on my Q700, at least. Was getting the occasional 
glitch--an extra byte on occasion.
 1996-11-02 06:52:24 +00:00
briggs
20c7b48d76 macs with scsibase offset 0x10000 from iobase use a SCSI CLK of 16.5MHz 
(off PrimeTime)--all others appear to use 25MHz.
 1996-10-30 05:39:21 +00:00
briggs
d5e58a6b20 Fix spelling error in panic. Double since of ResHndls[]. Use I/O kludge on 
all systems, not just CLASSII--A bunch of Quadras apparently have hardcoded
I/O addresses in the ROMs, too.
 1996-10-30 05:30:57 +00:00
briggs
a4d7da78e4 Add esp1 at obio? 1996-10-29 06:16:29 +00:00
briggs
50c2da8f27 Interrupt-driven, but slow, NCR 53c96 driver for the 040-based macs. Contains 
some guesses for the machines that have two of these buggers (I don't have
such a machine).  This driver is a copy of the sparc/alpha esp with a
minimum of changes--after we get it performing a bit more respectably,
we should see about re-normalizing the sources.
 1996-10-29 06:08:58 +00:00
briggs
32e07b8b3a Add prototype for mac68k_register_scsi_b_irq(). 1996-10-29 05:42:16 +00:00
briggs
215afb273e Flag Q900/950 as having a second scsi controller. 1996-10-29 05:36:15 +00:00
briggs
487a6bebfc Add a function to install an interrupt handler for 2nd scsi bus (Q900/950). 
Take a guess that it's at via2, bit 0 (where 5380 DRQ is).
 1996-10-29 05:33:37 +00:00
briggs
35667ae56f ncr96scsi -> esp for consistency with sparc and alpha. 1996-10-29 04:26:57 +00:00
briggs
3c34dac1d0 Obsolete. 1996-10-29 04:23:50 +00:00
briggs
1e7948408e Most 040 models have scsi regs at base + 0x10000, not base + 0xf000 
like the Q700.
 1996-10-28 03:54:08 +00:00
briggs
4675aac3cf Set SCSIBase properly on Quadras. Separate out CLASSAV. From Dave Huang 
<khym@bga.com>.
Also fix COMPAT_NOMID to compile again.
 1996-10-23 14:12:37 +00:00
briggs
0363bd9a12 Include ether.h since we're now using NETHER, also use NETHER > 0 not NETHER. 1996-10-23 13:35:41 +00:00
scottr
289b73be85 Fix a raft of printf format strings and some declaration problems for 
the case where we define DEBUG.  From Erik Bertelsen, closes PR 2871.
 1996-10-21 05:42:23 +00:00
briggs
084b3f6a4c Fix two bugs noticed by Taras Ivanenko <ivanenko@ctpa03.mit.edu> 
via.c: don't allow spl to remain at splhigh on error.
mainbus.c: Make sure that variable is initialized.
 1996-10-21 01:59:31 +00:00
scottr
a6865e3d2b Don't try to reference nfsbootdevname if we have no ether devices. 
Fixes PR 2860, from Paul Goyette <paul@pgoyette.bdt.com>.
 1996-10-21 00:31:18 +00:00
scottr
6bb6fab4ce Changes from the hp300 trap.c: 
- Fix up usage of MBD_ISPID().  (from Jason Thorpe)
- Be careful not to deref bad pointers in the MMU fault handler.  (ditto)
- Ensure trap() never deals with a NULL proc, and if our proc has
  no pcb, punt.  (Suggested by Gordon Ross)
 1996-10-17 06:42:44 +00:00
scottr
ccaecc2dda Some changes from hp300 (thanks Jason!): 
- Initialize proc0.p_addr just after setting up the kernel stack, to avoid
  getting NULL pointers in trap().  Change suggested by Gordon Ross.
- Panic if main() returns.
 1996-10-17 06:32:13 +00:00
scottr
e326c3123f We're paranoid; disable the IIci's cache card. 1996-10-16 04:00:28 +00:00
scottr
3370e6c419 External cache card on the IIci is enabled by default; 
use DISABLE_EXT_CACHE to turn it off.
 1996-10-16 03:55:21 +00:00
scottr
a6bbf8fc5b Define MACH_CLASSQ2, used by Performa 575. 
Remove susword() because of prototype conflict with <sys/systm.h>.
 1996-10-15 14:42:49 +00:00
scottr
b599d4a3f6 We no longer need 'options GENERIC' 1996-10-15 07:25:55 +00:00
scottr
dca6a7e025 Critical fix from Bill Studenmund: if CTS is deasserted and then 
immediately reasserted before we get a chance to process the interrupt,
we can inadvertantly get stuck with zs_tx_stopped set.  Move the delta
detection to the hard zs interrupt handler; the softint handler
will notice that something has happened with CTS and restart the
transmitter if it's asserted.
 1996-10-15 06:57:43 +00:00
scottr
6cd86aa894 BSD -> NetBSD 1996-10-15 06:41:48 +00:00
scottr
f4eeb69eab Several 68040/68LC040-related changes; we're not there yet, but this 
brings us closer to basic operation.

  - Verified/updated ROM vector entries for many systems, and new vector
    table entries for LC 520, LC 575/577/578, and Quadra 950
  - Implement a new machine class (MACH_CLASSQ2) for the LC 575 series
  - Use the ptest040() helper function in get_physical().

Also, in straytrap(), only enter the debugger #ifdef DDB.
 1996-10-15 06:40:39 +00:00
scottr
31d8d5c176 Implement ptest040(), a helper for get_physical(). 1996-10-15 06:31:07 +00:00
scottr
534c6caa6b Add EXEC_AOUT and EXEC_SCRIPT 1996-10-14 07:01:10 +00:00
christos
ad67e04154 backout previous kprintf change 1996-10-13 16:50:51 +00:00
christos
40ecbf8e72 backout previous kprintf change 1996-10-13 03:21:13 +00:00
scottr
2903ee4df5 Add second Quadra class and machineid (gestalt value) for Color Classic II 1996-10-12 07:35:29 +00:00
christos
06555645c2 printf -> kprintf, sprintf -> ksprintf 1996-10-11 00:24:36 +00:00
cgd
e36e19cf1e repoint at shared aout_machdep.h, not exec.h 1996-10-08 13:07:26 +00:00
cgd
472889f8e4 moved to aout_machdep.h (via repository copy) 1996-10-08 12:57:37 +00:00
scottr
872c12f95f Update ROM vectors for PB 500 1996-10-07 04:05:02 +00:00
scottr
4d11703980 Disable 040 caches in doboot(), and some minor stylistic changes to make 
the hand-coded assembly consistent throughout.
 1996-10-07 01:37:20 +00:00
scottr
d036bd234e Sync with Chris' changes to the alpha setroot() and friends to resolve some 
problems with entering "halt" at prompts.
 1996-10-04 14:07:03 +00:00
scottr
0f40954572 Add ROM vectors for the LC III, verified by Mike DeLima 
<miked@netrover.com>.
 1996-09-27 06:55:29 +00:00
scottr
21761e4ec0 Update for recent config(8) changes. 1996-09-22 06:49:09 +00:00
briggs
197a86e724 Don't allow get_physical to attempt get_pte if mmutype is 68040. 
(At least until get_pte works on the 040).
 1996-09-18 03:33:23 +00:00
scottr
d13cb4414c Convert fpu_type' to the more consistent fputype', and use the new 
#defines from m68k/include/cpu.h.
 1996-09-16 18:00:26 +00:00
scottr
3cf197cef1 Somehow the last change got mangled. Do over. 1996-09-16 05:24:21 +00:00
scottr
014f910806 Add ZS_CONSOLE_ABORT 1996-09-16 04:35:25 +00:00
scottr
debc473329 - Add a ZS_CONSOLE_ABORT option to enable a serial console break to 
force a drop to the system debugger.  WARNING:  this used to be the
  default behavior!  Modify custom kernel configs accordingly.
- Check for ZS_HWFLAG_CONABRT in zs_abort(), and don't abort if it's
  not set.
 1996-09-16 04:32:28 +00:00
scottr
696dd783a4 Move check for ZS_HWFLAG_CONABRT to zs_abort(). 1996-09-16 04:19:26 +00:00
scottr
a4b22a046a Implement poll(2). 1996-09-14 06:08:01 +00:00
scottr
19d545f1ae - Implement poll(2) 
- Convert splhigh() -> spladb()
- Guard references to adb_evq_tail and adb_evq_len!
 1996-09-14 06:01:12 +00:00
scottr
81543dc7c9 Implement poll(2). 1996-09-14 05:54:53 +00:00
scottr
4ddcca6bc8 Update prototypes to match Chris' cfprint_t change. Also, update comments 
in autoconf.h to reflect the mainbus.c split.
 1996-09-14 05:43:24 +00:00
scottr
e09160652b Sync with m68k/cpu.h changes. Also, test fpu_type instead of mmutype 
when handling fp exceptions.
 1996-09-12 21:25:31 +00:00
scottr
d3beac22f0 Sync with m68k/cpu.h changes 1996-09-12 21:25:29 +00:00
scottr
027b51f1f9 Define spladb() (conservatively, at least for now). 1996-09-12 20:39:19 +00:00
scottr
d407764c72 Add uk, remove ch device 1996-09-12 05:34:59 +00:00
scottr
7a6fae71e8 Add ss, uk SCSI devices 1996-09-12 05:33:41 +00:00
scottr
a453e56ffd This is the development/debug machine 1996-09-12 04:50:43 +00:00
scottr
7b33c93009 Update to current reality. 1996-09-12 04:49:52 +00:00
thorpej
e469c7beca Use <m68k/cpu.h>. 1996-09-11 00:11:42 +00:00
thorpej
1710b024c0 Document COMPAT_M68K4K, but leave it disabled by default. 1996-09-10 22:26:50 +00:00
mycroft
b3ffba62a6 Move strip(1) flags into a separate variable, so that $STRIP can 
be passed to subordinate make(1)s.  Remove $TOUCH.  Add HOSTED_CC,
HOSTED_CPPFLAGS, and HOSTED_CFLAGS, and use them when depending genassym.
 1996-09-09 21:06:55 +00:00
thorpej
de5110f41e Use <m68k/exec.h>. 1996-09-08 01:00:35 +00:00
mycroft
e6dd44f034 Use SIGBUS iff we get a legitimate bus fault. Use SIGSEGV for page protection 
violations (per Solaris, SVR4, AIX, Linux, Irix, and SunOS).
 1996-09-07 22:26:41 +00:00
mycroft
2bc736661a Implement poll(2). 1996-09-07 12:40:22 +00:00
mycroft
fc3def4096 Remove duplicate declarations of LKM functions and macros. 1996-09-05 15:46:22 +00:00
mycroft
b3eac79b64 tty stop functions really should return void, not int, and certainly not both. 1996-09-02 06:43:16 +00:00
mycroft
30a617c634 Wrap the default definition of S' in .ifndef'. 1996-08-31 21:40:47 +00:00
cgd
71ad30d0e9 (1) set scsi_link channel to either the appropriate channel (if a 
multi-channel driver), or to SCSI_CHANNEL_ONLY_ONE if a
    single-channel driver.
(2) use scsiprint() rather than a locally-defined autoconfig print
    function, and kill any locally-defined print function.
 1996-08-28 18:59:15 +00:00
cgd
2a73ef60b7 change cfprint_t type definition to take a const char *, rather than 
a char *, because that's what was really intended, and because
if the print function modifies the string, various things could become
unhappy (so the string should _not_ be modified).
 1996-08-27 21:53:46 +00:00
mrg
b8e9f36083 add COMPAT_12. 1996-08-26 23:39:36 +00:00
scottr
7dff0aa247 After servicing an interrupt, check to see that there's not another 
one pending before we clear the interrupt flag.  This avoids a condition
where the line appears to go catatonic (which is particularly easily
triggered by pppd).  From Bill Studenmund <wrstuden@loki.stanford.edu>.
XXX - we should probably log this if it gets excessive.
 1996-08-26 14:09:19 +00:00
mycroft
558d72128e Put into . Remove hooks for `config-dependent' and 
`device-driver' flags.
 1996-08-12 00:51:24 +00:00
mycroft
cf67f29afe * Add a HOSTED_C_C variable, which strips -p', -pg', and 
`-nostdinc', and use it when building genassym.
* Use `-nostdinc' just to be sure we're self-contained.
 1996-08-10 06:07:57 +00:00
mycroft
f94052ed3a * Define CWARNFLAGS and MKDEP in some moderately consistent fashion. 
* Make S expand to an absolute path at compile time.
* Use `-S' rather than `-x' to remove debugging symbols.
* Garbage collect unused variables.
* Reverse a handful of port-specific changes that do not correspond to
the common build model and are not needed.
 1996-08-10 05:29:24 +00:00
mrg
5abbf990f3 Change reboot(2) to take two arguments: bootopt like normal and also 
a boot string for firmware that can do this, such as the SPARC and
the sun3 models.  It is currently silently ignored on all other
hardware now, however.  The MD function "boot()" has been changed to
also take a char *.
 1996-08-09 10:30:23 +00:00
scottr
bfb6d245b5 Make the calculation of the PA returned by get_physical() agree with the 
comment immediately preceding it:  We have to take the most significant
"numbits" from the returned value "ph", and the rest from our addr.  The
addition used previously introduced a carry which was causing great
difficulty in determining the correct PA of the framebuffer VA passed in
by the booter.
 1996-08-06 04:03:33 +00:00
briggs
d2ea50dad8 Fix improperly terminated comment. Noticed by brg@dgate.org (Brian Gaeke). 1996-08-05 23:20:46 +00:00
scottr
2985b9d676 Initialize conspa so ite_match() can attach to the proper device. 1996-08-05 04:36:45 +00:00
scottr
571519c310 Attach ite semantics to the appropriate grf device. 1996-08-05 01:52:13 +00:00
scottr
91d8e018e2 Attach ite semantics to the appropriate grf device, instead of obio. 1996-08-05 01:26:31 +00:00
scottr
1d6cd98d6a Attach ite semantics to the appropriate grf device, instead of obio. 1996-08-05 01:00:12 +00:00
scottr
89f4fddbfe Add a way to tell grf_establish() that internal video doesn't actually 
occupy a slot.  This is necessary so that GRFIOCMAP can find the correct
physical address of the framebuffer.  Fixes P550, some LC models, and
perhaps the PB520.
 1996-08-04 06:03:47 +00:00
scottr
9931b6b324 MRG vectors for the Quadra 630, from Jason Godfrey <jason@primenet.com> and 
Bob Nestor <rnestor@metronet.com> (verified by Jason).
 1996-08-04 04:08:25 +00:00
scottr
0e57c5bb15 Be much more careful with setting up the MRG ROM vectors. If we are using 
a serial console and the PRAM read/write code happens to use the ADB ROM
vectors, we will have problems because the ADB hasn't been initialized.
For now, the only class of machines that we will set these up on regardless
of whether we are on a serial console or not is the original II series (II,
IIx, and IIcx).  Others can come later.
 1996-08-04 03:53:15 +00:00
scottr
c92399979d Back out previous; actually, this is never a problem for us. (Duh.) 1996-07-12 17:09:26 +00:00
scottr
73b545f8f1 Fix from Leo Weppelman: Change accesses to 'ssir' to inline asm macro's. 1996-07-10 18:31:49 +00:00
briggs
4043c93c6f Format the NetBSD Id string like it is elsewhere 1996-06-23 15:30:51 +00:00
briggs
9f01fc6ee4 Add a comment about the last change. 1996-06-23 15:02:58 +00:00
briggs
8d1606fcb9 Move splimp back to spl2 (from spl4). 1996-06-21 21:51:15 +00:00
scottr
231a66aa69 Minor style cleanup (avoid goto); no functional change. 1996-06-21 06:12:45 +00:00
scottr
08a2715e38 Test for serial console in adb_init() early, and abort if we're using it. 
Initiialize ROM vectors regardless of this so that the PRAM RTC read and
write work regardless of whether a serial console is in use.
 1996-06-21 06:10:56 +00:00
scottr
02f1ebc3de SPOT is now an NFS server, too. 1996-06-20 04:11:55 +00:00
scottr
758ea43e99 Completely revamp setroot() and friends. Since Chris' version of this code 
is close to how I reworked it, I pulled in the (essentially MI) NetBSD/alpha
and added the appropriate support around it.

- No need for the GENERIC kernel config option.
- NFS-mounted root and swap are supported.
- If we can't figure out where the root filesystem is from what the Booter
  tells us, ask the user.
- Split the mainbus autoconfig code to a separate file.

Also, update/add copyrights as appropriate.
 1996-06-19 03:21:03 +00:00
briggs
37472fd212 Remove Alice copyright. 1996-06-19 02:20:54 +00:00
briggs
09eef8070d Remove Alice copyright and comment from '92. 1996-06-19 02:19:13 +00:00
scottr
6c3aabe226 Update some comments, and the copyright 1996-06-19 01:47:28 +00:00
briggs
b4c60fd801 port-m68k/2547: wrong bus error detection from is@beverly.rhein.de. 1996-06-15 21:25:21 +00:00
scottr
3f231717ab raise splimp() to spl4(); we need to block zs interrupts, too. 1996-06-14 04:42:50 +00:00
scottr
26f0e61730 Update for current reality 1996-06-11 03:39:20 +00:00
scottr
c72d612674 Deal with interrupt flags more carefully, and use the correct offset 
for PB500-series SCSI I/O.  While I'm here, update the copyright.
 1996-06-11 03:20:23 +00:00
scottr
c74cec9954 Add missing cpu model info for Powerbook 500, and correct the ROM 
vectors for the same.
 1996-06-11 03:11:06 +00:00
scottr
3bac925c32 Fix bounds check for fpu description array. 1996-06-11 02:56:22 +00:00
scottr
5057bf9c78 Add Powerbook 500 series machine ID 1996-06-11 02:52:54 +00:00
briggs
9697ef6407 Add machine/viareg for prototype of via_set_modem(). 1996-06-09 04:27:59 +00:00
briggs
2b220a1581 Implement suggestion from is -- handle _fpfault differently for 040 and better. 1996-06-09 01:53:42 +00:00
briggs
b6759b3498 Fix typo. 1996-06-07 13:04:46 +00:00
briggs
04ad749207 Disable ROM vectors if booting from either serial console. PR#2525. 1996-06-07 10:48:26 +00:00
briggs
00c097a027 Changes from Bill Studenmund to support external clocks on the modem port. 1996-06-07 10:41:30 +00:00
briggs
4498ce3c90 Add constants for booter interface. 1996-06-07 10:27:19 +00:00
briggs
0d0487a98b Wait longer (2.5 sec) in wait_req_true/false. Some targets take a long time. 1996-06-07 02:44:15 +00:00
briggs
5c13e7184b Fix a typo. 1996-06-07 01:45:43 +00:00
briggs
79309c78d8 Patches from Bill Studenmund to get serial default settings from the booter. 1996-06-07 00:15:24 +00:00
briggs
6959d64eeb Some more constants from Bob Nestor--MacTV ADB works, now. 1996-06-04 03:04:49 +00:00
scottr
d9953b15c4 Minor cosmetic cleanup left over from reverting interrupt handlers 1996-06-01 06:10:34 +00:00
scottr
701205b00d Add tty_attach() as appropriate (for pstat -t) 1996-06-01 00:13:39 +00:00
scottr
cac1b831e9 - Simplify writes in sbc_drq_intr(). 
- When finished writing, if the SCSI bus has BSY asserted, write another
  byte to the SBC to ensure we get an interrupt.
- Unflag SCSI interrupts on the VIA whenever we clear the interrupts
  on the SBC itself.
 1996-05-29 14:26:33 +00:00
briggs
014b404127 Clean up the interrupt handling somewhat. 1996-05-25 16:42:24 +00:00
briggs
100623915b Clear via2 interrupts before processing, too. It is up to the drivers to clear 
any interrupts that are flagged during processing.
 1996-05-25 16:31:04 +00:00
briggs
d6345a7855 More from Dave Huang (khym@bga.com)--set ROMLEN to 2MB and make another 
class for AV machines (C660AV and Q840AV).
 1996-05-25 14:48:38 +00:00
briggs
30e64f90b7 Patches from Dave Huang (khym@bga.com) to get MRG ADB working on his 660av. 1996-05-25 14:45:31 +00:00
briggs
10221fc1cd Do not let getty open ite if it's not been initialized. 1996-05-25 00:56:38 +00:00
briggs
78560abd91 Change the console banner message. 1996-05-23 05:18:48 +00:00
briggs
2126c0d3c1 Fix from Bill Studenmund to set flags sanely on serial console. 1996-05-23 02:06:53 +00:00
briggs
320adf52bf Add MACH_CLASSDUO. 1996-05-22 17:53:24 +00:00
briggs
4d059305ec Remove some dead code, as suggested by scottr, and clone a new machine 
class off of the powerbook for the Duos.  They apparently use an RBV-like
chip for the VIA2.
 1996-05-22 17:52:48 +00:00
briggs
534d58c701 Get rid of compiler warning if DBG_PID is not defined. 1996-05-22 17:16:45 +00:00
briggs
057adea27d Apparently the MRG ADB code becomes unstable if we handle via1 interrupts 
properly, so go back to unflagging them all before processing any via1
interrupts.  Perhaps this can be changed back when we get ADB code that
does not rely on the ROMs?
 1996-05-21 02:46:02 +00:00
briggs
3fb1d834fc Actually clear the interrupt on the RBV. 1996-05-21 00:04:18 +00:00
scottr
4b712a8c3f Due to the latching effect of the 6522 (VIA) chip, we need to unflag 
interrupts only after the condition that caused the interrupt has been
cleared.  This is a particular problem with the 5380 SCSI controller,
since the Mac glue logic may raise (e.g.) the SCSI DRQ interrupt a number
of times during the course of a normal transfer.  By waiting to unflag it,
we effectively ignore all but the first.
 1996-05-20 04:32:33 +00:00
scottr
d28f9a6699 Fix the last change; CVS apparently biffed it. 1996-05-20 03:23:36 +00:00
scottr
820895162d Update for new grf attachment code. 1996-05-19 22:29:04 +00:00
scottr
d048582c60 New grf attachment code, mostly by Jason Thorpe with some cleanup by me. 
This will allow dt and X to work with a generic kernel, rather than
compiling different kernels that attach grf0 to a NuBus adapter or
internal video.
 1996-05-19 22:27:04 +00:00
briggs
4029840249 Ooops. cut 'n' pasto. splzs should 4, not 2. 1996-05-19 04:30:32 +00:00
briggs
2635a9c602 Serial driver with interface to a slightly modified version of the machine- 
independent z8530 driver.  When that driver is updated, the local copy
of those files may be removed.  From Bill Studenmund.
Compiler warnings fixed by me.
 1996-05-18 18:53:50 +00:00
briggs
78c78f916e Fixup a few prototypes and put 'em in their place. 1996-05-18 18:52:41 +00:00
christos
8c29c79939 - remove cpu_exec_prep_oldzmagic and use exec_aout_prep_oldzmagic 1996-05-18 16:01:00 +00:00
briggs
e9d5ab8b3a Set _kernel_text as recommended by Gordon--set before vector table. 1996-05-17 02:11:47 +00:00
briggs
df57030b9c Add register use constraints to a bunch of asm() statements. 1996-05-15 03:23:10 +00:00
briggs
1350f9fb7d print the failure if we do not correctly determine the amount of RAM 
on the ethernet card.
 1996-05-15 03:20:22 +00:00
briggs
65b1980d5a Invalidate the pte for the peeked va in bus_peek(). 1996-05-15 02:51:00 +00:00
briggs
22637072e3 Set mac68k_vidphys outside of get_mapping() so the II and others will 
get the default value correctly.
 1996-05-15 02:34:33 +00:00
briggs
df2dde6eb0 Some updates from Bob Nestor <rnestor@metronet.com> to get the Performa 550 
working again.  I broke it when I moved the ROM mapping so it was no
longer mapped on a friendly address boundary.  Some cleanup.
 1996-05-14 04:00:48 +00:00
briggs
ce096d50d5 Add a short comment. 1996-05-14 03:57:32 +00:00
mycroft
540f9550c0 Make `make depend' work for libraries. 1996-05-11 16:11:30 +00:00
briggs
468b8f30c6 Get rid of the NuBus Superspace kludge--it should no longer be necessary 
or even desirable.
 1996-05-10 20:53:31 +00:00
scottr
5b680d94ba Make this compile if DEBUG is defined. 1996-05-08 15:14:53 +00:00
scottr
e93e429cc5 Note that rtclock_intr() could be tweaked, but why it isn't. 1996-05-08 15:13:22 +00:00