simonb
fcdc111c1a
Cosmestic changes (more like the mips3+ code).
2002-03-05 16:03:22 +00:00
simonb
c5d34b4371
Remove the number of TLB entries for different rx39 CPUs - this info
...
is in the table in mips_machdep.c now.
2002-03-05 16:02:48 +00:00
simonb
c6bcfb2589
Add support for MIPS32 and MIPS64 architectures:
...
- Move away from using CPUISMIPS3; use MIPS_HAS_R4K_MMU instead.
- Bump the Sysmap size a little for large-memory machines.
XXX: still need work, especially in pmap_procwr().
2002-03-05 16:01:25 +00:00
simonb
0f9c00fc2e
Add support for MIPS32 and MIPS64 architectures:
...
- Move away from using CPUISMIPS3; use MIPS_HAS_R4K_MMU instead.
- ANSIfy.
2002-03-05 15:57:20 +00:00
simonb
fa9c08ab16
Remove HPCMIPS_FLUSHCACHE_XXX debug code.
...
Remove old unused exception frame unwind code.
Change a MIPS3 check to a MIPS3_PLUS check.
ANSIfy.
2002-03-05 15:55:41 +00:00
simonb
278bfc1c02
Add support for MIPS32 and MIPS64 architectures:
...
- move away from using CPUISMIPS3; use MIPS_HAS_CLOCK instead.
2002-03-05 15:54:33 +00:00
simonb
351c1c16a6
Add support for MIPS32 and MIPS64 architectures:
...
- Use a table-driven CPU detection algorithm instead of multiple
case statements.
- Add MIPS32/64 feature detection using the architected CP0 registers
(from Broadcom Corp).
- Call MD mips_machdep_cache_config() function if
__HAVE_MIPS_MACHDEP_CACHE_CONFIG is defined - used to set up the
L2 cache on some ports.
2002-03-05 15:53:00 +00:00
simonb
ba8e2e82e4
Add support for MIPS32 and MIPS64 architectures:
...
- Remove all mmu-related code that may use 32 register on mips32-style
implementatios and move them to mipsX_subr.S - which is then included
from mips{3,32,64,5900}_subr.S with various control defines enabled.
- Remove local cache instruction flags
- Add badaddr64 (from Broadcom Corp).
2002-03-05 15:50:59 +00:00
simonb
9ed4fd257f
Change a MIPS3 check to a MIPS3_PLUS check.
...
XXX: I'm not 100% sure of the intent of this code - it would seem that
it needs a run-time check of CPU ISA to be completely correct...
2002-03-05 15:48:31 +00:00
simonb
d62813603c
Check userland address and address alignent as two separate checks.
...
Fix for when mips_reg_t is 64-bits.
ANSIfy.
2002-03-05 15:46:51 +00:00
simonb
fe86ad150e
Change MIPS3 checks to MIPS3_PLUS checks (XXX - still bogus!).
2002-03-05 15:44:40 +00:00
simonb
c9a3bd8900
Add support for MIPS32 and MIPS64 architectures:
...
- Move away from using CPUISMIPS3; use MIPS_HAS_R4K_MMU instead.
- Add a command to dump cp0 state.
2002-03-05 15:43:25 +00:00
simonb
9b785c48f3
Cache ops for MIPS32/64 cpus.
2002-03-05 15:42:50 +00:00
simonb
0446046fde
Add MIPS32/64 cache setup code (from Broadcom Corp).
2002-03-05 15:42:21 +00:00
simonb
cae6e0e516
Prototypes for MIPS32/64 cache ops.
2002-03-05 15:41:48 +00:00
simonb
0ff59237ca
Change a MIPS3 check to a MIPS3_PLUS check (XXX - still bogus!).
2002-03-05 15:41:14 +00:00
simonb
01422aae5c
Add support for MIPS32 and MIPS64 architectures:
...
- move away from using CPUISMIPS3; use MIPS_HAS_CLOCK instead.
2002-03-05 15:40:10 +00:00
simonb
1d05db445d
Add support for MIPS32 and MIPS64 architectures:
...
- Move away from using CPUISMIPS3; use MIPS_HAS_R4K_MMU instead.
2002-03-05 15:39:31 +00:00
simonb
934c4ba555
Add support for MIPS32 and MIPS64 architectures:
...
Remove the unused PSL_USERCLR and BASEPRI macros.
2002-03-05 15:38:33 +00:00
tv
c8e92c46c8
Put klen' and
newk' back in local block so that their scope is limited.
...
(Reduces 1.31 to a one-line diff from 1.30.)
2002-03-05 15:37:35 +00:00
simonb
b255c47737
Add support for MIPS32 and MIPS64 architectures:
...
Better cache coherency attribute macros (from Broadcom Corp).
2002-03-05 15:37:32 +00:00
simonb
f38d391749
Add support for MIPS32 and MIPS64 architectures:
...
- Add mips32 and mips64 locore function prototypes.
- Add mips3_lw_a64() and mips3_sw_a64() for access data at any
64bit address (from Broadcom Corp).
- Add Broadcom and Sandcraft CPU company ids.
2002-03-05 15:36:51 +00:00
simonb
2fab526863
Add support for MIPS32 and MIPS64 architectures:
...
- Add XKPHYS macros (from Broadcom Corp).
- Add some r5900 register bit definitions.
- Add extra exception vector addresses for mips32/mips64 and r5900.
- Make the mips cp0 register definitions available from both asm and C.
- Add some Alchemy and Sandcraft CPU ids.
- Add r3000, tx39xx and r4x00 CPU revision ids.
- Remove defines for the number of TLBs on some CPUs.
2002-03-05 15:35:22 +00:00
simonb
60fe625bd0
Add support for MIPS32 and MIPS64 architectures:
...
- Clean up (somewhat) mips1 vs mips3+ configuration.
XXX: this is still quite messy.
- Add cpu frequency info to struct cpu_info.
- ANSIfy.
2002-03-05 15:34:04 +00:00
simonb
ef0fcacb94
ANSIfy.
2002-03-05 15:12:58 +00:00
wiz
10d6eb080d
Drop duplicate .Pp.
2002-03-05 15:09:26 +00:00
pk
583e840c0b
Make $(OBJS) depend on the ufs headers link.
2002-03-05 15:08:27 +00:00
wiz
505d53c807
Clarify input source. Drop a duplicate .Pp while I am here.
2002-03-05 15:06:16 +00:00
pk
5f8328c032
Serialize gram.y -> gram.[ch] transformation.
2002-03-05 15:00:07 +00:00
simonb
8070cbd848
Add 4way 16/32-byte-line cache op primitives.
2002-03-05 14:32:26 +00:00
simonb
e8e49d677b
Don't explicitly depend locore_*.S and fp.S on assym.h - this is done
...
for all .S files in /sys/conf/Makefile.kern.inc.
2002-03-05 14:28:31 +00:00
simonb
7bd5992f7a
Fix for when we have 64 bit registers enabled for userland (but still
...
using the o32 API).
2002-03-05 14:23:50 +00:00
tron
a7422358e9
Include "sys/time.h" here to get the definition of "struct timeval".
2002-03-05 14:23:32 +00:00
simonb
4a931bedb8
KNF whitespace.
2002-03-05 14:21:32 +00:00
simonb
59f53aab95
The 64-bit safe, ILP32 o32 model is safe with the current stdarg
...
implementation.
2002-03-05 14:18:12 +00:00
agc
b66bb2992d
Output @blddep directives properly when displaying PLISTs.
2002-03-05 14:18:07 +00:00
simonb
836b7ec262
Include <machine/cdefs.h> to select 32/64bit APIs.
2002-03-05 14:17:16 +00:00
agc
dae19d20ed
Output @blddep directives before @pkgdep directives.
2002-03-05 14:16:11 +00:00
simonb
b2fb45331b
ANSIfy.
2002-03-05 14:08:43 +00:00
simonb
58faa5f0ca
Clean up #ifdef checks a little.
2002-03-05 14:08:07 +00:00
wiz
92a8da0e0d
'securyty' looks nice. Sadly, it's wrong.
2002-03-05 13:59:13 +00:00
agc
33ef3d651a
Add a new packing list directive, @blddep, which notes the exact
...
version of the pre-requisite package which was used to build the
package. This is derived automatically from the list of pre-requisite
packages which is provided to pkg_create(1) in the -P argument.
Bump the version number to 20020305.
Versions of the pkg_install tools prior to 20020305, when adding a
binary package with embedded @blddep directives, will warn that the
directive is not recognised, but will continue to add the binary
package.
2002-03-05 13:01:19 +00:00
simonb
592e570685
Remove prototypes for some static functions that don't exist.
2002-03-05 12:54:34 +00:00
mrg
235e0d0060
clean up.
2002-03-05 12:32:16 +00:00
mrg
4192ea474e
merge less-374
2002-03-05 12:28:31 +00:00
haya
cff90ff521
Enforce 10-bit width for I/O addresses of 16-bit PC Cards when I/O
...
start address is assigned by a driver.
2002-03-05 11:56:33 +00:00
mrg
9668e4f341
less 374
2002-03-05 11:44:53 +00:00
simonb
9bcc70fa1d
Don't cast argument to ffs() to long.
...
Per discussion on port-alpha, noticed by Robert Elz.
2002-03-05 09:40:38 +00:00
itojun
2246ec4a66
on redirect output, always try to attach target link layer address option.
2002-03-05 08:13:56 +00:00
simonb
c7339f8919
Include <sys/kernel.h> if UVMHIST is defined - the "cold" variable is
...
used in the UVMHIST_LOG macro.
Breakage reported by Chuck Silvers in private mail.
2002-03-05 05:45:54 +00:00