Commit Graph

33 Commits

Author SHA1 Message Date
fvdl 17c31a8a21 Add ETHER|NONE to default capabilities, or we'll panic when attaching
the forthcoming ex driver.
1998-08-28 12:50:36 +00:00
bouyer fdb344b38f - use sc_tlphycap with bitmasks instead of direct comparaison (needed now
that we may have (TLPHY_MEDIA_10_x | TLPHY_MEDIA_NO_10_T).
- add carrier detect for AUI/BNC.

This now works properly with a "Compaq Netelligent 10/100 TX" and a
"Compaq ProLiant Integrated Netelligent 10/100 TX", untested with others
(but should work as well).
1998-08-17 16:41:45 +00:00
thorpej ae8bdb1e72 Make sure CIMDIS is set and FLINK is clear in the PCR. 1998-08-14 00:23:26 +00:00
thorpej 94e489e277 If the autonegotiation is enabled, the PAR doesn't indicate duplex mode
properly!  Work around this by determing current active media by taking
the highest-order common bit of our advertised capabilites and the link
partner's.

If the link partner doens't do autonegotiation, then parallel detection will
pick up the media type, which will never be full-duplex, so reading the PAR
is ok in this case.

Bug pointed out by Matthias Drochner, work-around inspired by reading
the dp83840 manual, section 3.9 (IEEE 802.3u auto-negotiation).
1998-08-12 22:41:21 +00:00
thorpej d95a6e9dec Make a variable name reflect a register name. 1998-08-12 22:27:42 +00:00
thorpej 981f0cd0d0 If autonegotiation is enabled in the BMSR, and the BMCR doens't claim
that it has completed, report "none" as the active media type.
1998-08-12 20:56:34 +00:00
thorpej a24f6f77bf Ugh, don't print out "autonegotiation failed to complete" if it did.
We get these once a second if we're in auto mode, the interface is up,
and there's no carrier.
1998-08-12 20:46:47 +00:00
thorpej 5bec554354 Driver for the 3Com internal PHY, found on 3c905B-TX cards (and maybe
some 3c905-TX?).  Partially from Frank van der Linden.
1998-08-12 08:46:20 +00:00
thorpej 9b46e98b21 Adapt to attribute name change. Also, deal with 3Com PHYs that report
0/0 as their oui/model IDs.
1998-08-11 00:41:44 +00:00
thorpej f0d19c2ee1 Change the name of the attribute to "mii". 1998-08-11 00:05:36 +00:00
thorpej e7643533b6 Adapt to MII layer changes. 1998-08-11 00:03:12 +00:00
thorpej e8e237ffc6 Device driver for the Quality Semiconductor QS6612 PHY, found in
SMC EtherPower-II cards.
1998-08-11 00:01:03 +00:00
thorpej 6bae1a0bea Device driver for the Intel i82555 PHY. 1998-08-11 00:00:28 +00:00
thorpej 045a100420 Adapt to the new MII layer. This PHY driver now properly supports
802.3u autonegotiation, and will report the precise media selected
by autonegotiation by reading PHY-specific registers.

XXX There is still some work to do wrt. autonegotiation and the
BNC/AUI support in the ThunderLAN PHY.
1998-08-10 23:59:58 +00:00
thorpej f66f3b1ba9 Adapt to the new MII layer. This PHY driver now properly supports
802.3u autonegotiation, and will report the precise media selected
by autonegotiation by reading PHY-specific registers.
1998-08-10 23:58:39 +00:00
thorpej ad00a98756 Initial generation. 1998-08-10 23:56:19 +00:00
thorpej 3f8be46d4d Near complete rewrite of the MII layer to present an interface compatible
with BSDI's MII layer to device drivers.
1998-08-10 23:55:16 +00:00
cgd 651b44e211 Rework the way kernel include files are installed. In the new method,
as with user-land programs, include files are installed by each directory
in the tree that has includes to install.  (This allows more flexibility
as to what gets installed, makes 'partial installs' easier, and gives us
more options as to which machines' includes get installed at any given
time.)  The old SYS_INCLUDES={symlinks,copies} behaviours are _both_
still supported, though at least one bug in the 'symlinks' case is
fixed by this change.  Include files can't be build before installation,
so directories that have includes as targets (e.g. dev/pci) have to move
those targets into a different Makefile.
1998-06-12 23:22:30 +00:00
thorpej 5bc2217a49 Nuke __BROKEN_INDIRECT_CONFIG. 1998-06-09 07:24:55 +00:00
thorpej 8354e68508 Remove "class" declarations, and add "devclass" declarations where
appropriate.  Fix several inconsistencies between device class and
attributes.  Mostly from Chris Demetriou.
1998-02-16 22:12:45 +00:00
bouyer 0435e7ea98 Correct a bogosity in the adapter->mii attach code pointed out by cgd:
in pci/if_tl.c, call config_found() with a print function, instead of
printing ourself a message in if_tl.c if no miibus was found. The print
function is in mii/mii.c (mii_adapter_print()) so that it can be used by any
adapter (idea from the scsi system).
1998-02-11 19:02:11 +00:00
thorpej 095c4c092d Adjust for config changes. 1998-01-12 09:23:08 +00:00
perry fff05a68ab RCSID Police. 1998-01-05 07:31:05 +00:00
thorpej c356454eef Cosmetic changes. 1997-11-17 09:08:26 +00:00
thorpej 1413de77e0 KNF. 1997-11-17 09:02:27 +00:00
thorpej fc216e9a85 Cosmetic changes. 1997-11-17 08:56:08 +00:00
thorpej 5bf3550518 KNF. 1997-11-17 08:52:38 +00:00
thorpej 3a748eae8f KNF. 1997-11-17 08:38:04 +00:00
thorpej 942f131579 Fix RCS ID. 1997-11-17 08:28:09 +00:00
thorpej 7602fbd930 Cosmetic changes. 1997-11-17 08:25:56 +00:00
christos 473310c0a4 PR/4510: William Coldwell: Recognize TI thunderlan. 1997-11-16 22:38:33 +00:00
bouyer b1b04efc58 Correct 'ThunderLAN' spelling 1997-10-21 05:54:21 +00:00
bouyer 10fcf021a5 Generic functions for the MII layer. mii attaches to mii-capable network
adapters, and provide media-selections and status to the parent.
This includes drivers for the Thunderland integrated PHY, and
National Semiconductor's DP83840A.
Note: The interface betweeen network controller and mii is not complete yet,
and will need some minors tweaks to support media auto-selection.
1997-10-17 17:33:45 +00:00