407eec5184
minor fixes
2001-06-17 04:10:16 +00:00
24c92d43e5
minor typo
2001-06-17 00:48:28 +00:00
662f93aeeb
Change the way boot strings are handled and the way the root device
...
is determined. This allows multiple internal disks in a raq2 to work.
2001-06-17 00:11:40 +00:00
38527630e2
fixes from perry
2001-06-16 23:17:34 +00:00
002c8b43f1
Add a list with a brief description of each ports. With 43 ports right
...
now it is a bit tough to collect all the information.
XXX: Portmasters, or people who know better, please correct any mistakes.
2001-06-16 23:04:15 +00:00
01704d0990
Add iha at pci, which just works on my CATS.
2001-06-16 13:58:18 +00:00
bf923a99b8
Don't set HPCFB_SWAP_BYTE (if little endian).
2001-06-16 12:53:05 +00:00
ef86c3badd
fix handling of transmit length calculation so we now handle full length xmits
2001-06-16 09:18:46 +00:00
e9d708e25b
allow unaligned pointers in bus_dmamap_sync
2001-06-16 09:08:05 +00:00
aa35eff5da
Enable some devices which I am/was using:
...
epic* at pci?
fxp* at pci?
sip* at pci?
tlp* at pci?
inphys* at mii?
qsphys* at mii?
2001-06-16 05:47:37 +00:00
38fc9e283d
Fix pte_spill to set the index on the proper pvo. Deal with recursion
...
in pmap_syncicache.
2001-06-16 03:32:48 +00:00
c5bc6249f0
Make sure to write out the dump header into an independent block
...
on the dump device on sun3x. (sync with sun3)
Now savecore(8) can find core dump in dumpdev properly.
XXX "target kcore /dev/mem" on gdb does not work yet.
2001-06-16 00:38:19 +00:00
979edf3c4a
pmap_syncicache can be called recursively. Properly deal with that
...
situation.
2001-06-15 22:28:54 +00:00
60f8375758
Replace printf with (*pr)
2001-06-15 22:27:07 +00:00
093fab47ce
remove extra args from printf
2001-06-15 21:56:06 +00:00
e55c9f74af
Add missing braces in pmap_pte_to_pvo (DEBUG|PMAPCHECK defined). Rearrange
...
some code so that consistency check in pmap_pte_to_pvo do not trigger on
false positives. Correct/enhance some printfs.
2001-06-15 21:29:54 +00:00
25a2c4d481
While not stricly needed, to match pmap_pvo_find_va, mask of the page
...
offset bits.
2001-06-15 20:53:45 +00:00
787e1b0b36
When comparing VA's, ignore the page offset bits.
...
Invert and strengthen a test for pte equality.
2001-06-15 20:43:01 +00:00
c7c7dab8f1
Stop overloading unused bits in the pte. Use the low 12bits of the vaddr
...
instead to store them. Add a macro to fetch the vaddr without them.
Make all variables/routines prefixed with pmap_
Cleanup & fix some of the vsid bitmap usage.
Cleanup DEBUG printfs. Add some more checks to pmap_pvo_to_pte.
2001-06-15 18:26:06 +00:00
b97fed556d
vm_map_t -> struct vm_map *
...
vm_page_t -> struct vm_page *
simple_lock_data_t -> struct simplelock
2001-06-15 17:48:13 +00:00
7f44dfec92
Compile again.
2001-06-15 15:53:27 +00:00
80e152f0fc
Use new common bus.h framework.
2001-06-15 15:50:04 +00:00
3a3661fb58
Delete unused function.
2001-06-15 15:24:03 +00:00
17eff1c958
Pass WDC_CAPABILITY_MODE to the wdc core, so that it will set timings
...
on the drive side too.
Deal properly with the case where master and slave don't have the same timings,
and set PIO timings too.
2001-06-15 10:35:26 +00:00
192642af05
Don't enable PMAPCHECK by default.
2001-06-15 08:17:00 +00:00
f6b81171c1
Globalize trapexit. Improve db_trace.c so that you can trace thru traps!
...
Rework the output so that is also prints the frame address by default.
2001-06-15 08:09:33 +00:00
0278444e19
Add a check to pvo_check which makes sure the pte is really in the
...
pteg_table. In pte_to_va, take into account if the PTE_HID is set.
2001-06-15 08:08:04 +00:00
ab92d9cd59
phys_map should use kenter/kremove
2001-06-15 08:07:03 +00:00
816a5637cd
When releasing the SR VSID, mask off the bits not related to the index
...
in the pmap vsid bitmap.
2001-06-15 06:27:07 +00:00
d3249871b5
Rework how user-mode instruction and stack fetches are done.
...
While we're in here, catch another vm86 protocol botch.
2001-06-15 05:43:40 +00:00
e51a043945
Yet more interrupt cleanup -- the platform mater interrupt establish
...
function now just takes an "irq", which is an index into the irqmap
table for that platform.
2001-06-15 04:01:39 +00:00
6000674775
Now unmap the PROM's pages only after we have
...
installed our own vector table.
2001-06-15 00:32:38 +00:00
5dc1e8334c
Fix abuse of bus_space_handles in podloader functions.
2001-06-14 23:09:23 +00:00
8eb3b954f1
Don't need to prototype child_return() here, it's in <sys/proc.h>.
2001-06-14 22:56:55 +00:00
1d161cd563
Correct a comment.
2001-06-14 19:03:43 +00:00
fe87c9aade
When the old PCI address map is in use, disable I/O space. Also disable
...
I/O space on PBC revs < B2.
2001-06-14 18:52:26 +00:00
0ddf0d259b
Don't use BUS_END to compute SYS_END.
2001-06-14 18:48:23 +00:00
80dfaa3e5a
Read the PCI memory space base and the PCI DMA window base from the
...
V3 PBC, and use them in the bus mem tag and the bus dma tag on the
P-4032. This allows us to get much further when PMON has configured
the PBC using the old-style PCI address map.
2001-06-14 17:57:26 +00:00
6c492e4e70
fix hpcio configuration.
2001-06-14 16:55:34 +00:00
1a4779d8a4
Now get the prototypes from the common sun68k/sun68k/control.h.
2001-06-14 16:36:46 +00:00
7ab5601058
Since physical memory below 0x2000 isn't mapped anywhere
...
for now, return EFAULT when /dev/mem tries to read it.
Other physical memory not managed by the pmap system is
mapped at the same virtual addresses. Now that we
understand how VME PTEs are constructed, give mmapping
a VME bus a better chance of working..
2001-06-14 16:32:45 +00:00
4c73c770ce
Add MEMSIZE and ETHADDR options, so that they can be set in
...
the kernel config file, in case you have a buggy PMON which
doesn't provide the environment variables to the kernel.
2001-06-14 16:14:37 +00:00
8f6cff260d
Now uses the common sun68k bus_space/bus_dma
...
and autoconf code.
2001-06-14 15:54:18 +00:00
e20baedfd4
Added prototypes for w16zero and w16copy, found
...
in the new w16copy.s.
2001-06-14 15:49:05 +00:00
c7154a0bfd
Added two functions that zero memory and copy memory
...
in an optimized fashion using only properly aligned
8- and 16-bit accesses.
2001-06-14 15:38:16 +00:00
defcaa8bcb
Initlialize PMON after configuring the console, so we can see
...
debugging info.
2001-06-14 15:29:23 +00:00
587d3ec2b4
Insert some debugging code, conditional on PMON_DEBUG.
2001-06-14 15:28:56 +00:00
70ba9292d4
Now use the bus_space_peek_N function to probe for
...
the device, and common sun68k_find_prom_map function to
find a PROM mapping for a device.
2001-06-14 15:20:46 +00:00
9c1d420baf
This file has been moved to sys/dev/vme.
2001-06-14 15:15:15 +00:00
15b02e5ba0
Added a function, prom_sd_target, to translate a PROM
...
sd unit number into a SCSI target. Now only set up our
g0 and g4 handlers inside prom_abort(), so we're not
normally running with them.
2001-06-14 13:21:39 +00:00
edad0f956c
Under _LKM, now undefine KERNBASE for declaring it.
...
Not sure if this is correct, but the real question
is whether 68000 LKMs are even possible.
2001-06-14 13:18:54 +00:00
54f88e2668
Corrected the value of DVMA_OBIO_SLAVE_BASE; obio
...
devices can see the entire CPU address space.
2001-06-14 13:17:04 +00:00
01e5507e7e
Now simply include the real header under arch/sun68k.
2001-06-14 13:16:03 +00:00
000fa36842
Moved the definition of romVectorPtr here from mon.h.
...
Prototype prom_sd_target.
2001-06-14 13:15:21 +00:00
9e52c15c31
Now simply include the real header under arch/sun68k.
2001-06-14 13:12:50 +00:00
af6051568c
Removed. These files can be found under arch/sun68k now.
2001-06-14 13:10:20 +00:00
c3679650d5
Added some kernel sources that can be shared between
...
sun2 and sun3.
2001-06-14 13:08:11 +00:00
17de8ec19e
Set ARCHSUBDIR to m68k when MACHINE_ARCH is m68000.
...
Add sun68k to SUBDIR when MACHINE is sun2.
2001-06-14 13:01:27 +00:00
c1c742b4c9
Added sources for the sun2 boot blocks and other
...
sun68k-ish code, all of which ought to eventually
be shared with the sun3.
2001-06-14 12:57:10 +00:00
ea54d618ea
ANSI KNF. and change my copyright to TNF copyright.
2001-06-14 11:09:55 +00:00
4cc6a0ac93
fix 'mask clock to PIU'
2001-06-14 08:43:41 +00:00
3bad583046
Oops, use the correct space tag when unmapping the RTC on the
...
P-4032 after calibrating the clock.
2001-06-14 05:58:19 +00:00
4d51fe368b
change the meaning of ifnet.if_lastchange to meet RFC1573 ifLastChange.
...
follows BSD/OS practice and ucd-snmp code (FreeBSD does it for specific
interfaces only).
was: if_lastchange get updated on every packet transmission/receipt.
now: if_lastchange get updated when IFF_UP is changed.
2001-06-14 05:44:23 +00:00
5b1c3b74ba
Remove externs moved to headers, fix interrupt masks to be zeroes at startup,
...
add MIPS clock interrupt (int5) event counter and clean up some more debug
goo.
2001-06-14 01:15:35 +00:00
d9d912728f
Get rid of externs moved to header files, add event counter for the clock
...
interrupt, use platform.ticks_per_hz instead of hardcoded constant for the
counter increment (XX: not that the ticks_per_hz is calculated for the IP32
yet).
2001-06-14 01:09:37 +00:00
3327706cab
Add externs for struct platform and the machine type definitions (mach_type,
...
mach_subtype, mach_boardrev).
2001-06-14 01:06:08 +00:00
0774d04303
(TX39) switch from TX local I/O manager to hpcio
2001-06-13 19:09:07 +00:00
0adcac34e5
That's supposed to be <machine/io.h> in the XXX'd #ifdef, not a repeat
...
of <machine/bus.h>.
2001-06-13 17:52:43 +00:00
01b21ab7a1
register VRIP_INTR_BAT handler to vrip_intr_establish().
2001-06-13 16:05:59 +00:00
45c99b6989
remove resolved TODOs, reorder some entries, and some formating fixes.
2001-06-13 15:41:53 +00:00
22b59feda9
introduce "struct platform", and remove "cputype" variable.
2001-06-13 15:39:13 +00:00
fb93db6893
remove __BROKEN_CONFIG_UNIT_USAGE, finally (sorry to be late, cgd).
2001-06-13 15:38:15 +00:00
cefa712681
update configurations for "struct platform" and related changes
2001-06-13 15:37:27 +00:00
56716edd1f
incomplete platfrom description for SNI RM200.
2001-06-13 15:36:44 +00:00
6ddec4b5e4
platform description for NEC RISCstation 2200 variants.
...
not tested.
2001-06-13 15:36:04 +00:00
8612165cf4
platfrom description for NEC Express RISCserver and NEC RISCserver 2200.
...
tested by Bob Meader on NEC RISCserver 2200, and
Chuck Silvers on NeTpower S1030 (likely compatible with Express RISCserver),
until it asks for boot device.
2001-06-13 15:35:04 +00:00
ee220d37b2
platform description for NEC RISCstation 2250.
...
test by Shuichiro URATA (until it asks for boot device)
2001-06-13 15:33:27 +00:00
42215b6b35
platform description for NEC Express 5800/230, R4400 & PCI variant.
...
tested by Izumi TSUTSUI.
2001-06-13 15:30:38 +00:00
ed19e07cc7
platform description for Acer PICA-61 and its OEM.
...
tested by myself on NEC Image RISCstation.
2001-06-13 15:29:30 +00:00
4e70aed6b2
platform description for MIPS Magnum (Microsoft-Jazz).
...
tested by myself on a NEC Magnum derived machine.
2001-06-13 15:28:23 +00:00
a8a1317719
latform description for DESKTECH Tyne and rPC44.
...
not tested.
2001-06-13 15:27:17 +00:00
b7f2c5a631
common chipset description for NEC PCI generation platforms
2001-06-13 15:23:22 +00:00
221f729935
common chipset description for NEC EISA generation platforms
2001-06-13 15:22:49 +00:00
272b3c0d0d
common chipset description for NEC EISA and PCI generation platforms
2001-06-13 15:21:52 +00:00
3e5520d4d1
common description for platforms which have Jazz and EISA
...
but doesn't have PCI, like magnum based platforms and
NEC EISA generation platforms
2001-06-13 15:21:00 +00:00
4f9452f773
common chipset description for magnum based platforms like
...
Microsoft-Jazz and PICA-61
2001-06-13 15:19:28 +00:00
eab4fd5e7a
rename statically allocated software context which is needed for
...
console initialization, from "struct necpb_config necpb_configuration;"
to "struct necpb_context necpb_main_context".
to resolve naming conflicts with "struct XXX_config *XXX_conf;"
which describes platform-dependent configuration variants.
2001-06-13 15:18:28 +00:00
1aa149136b
rename statically allocated software context which is needed for
...
console initialization, from "struct necpb_config necpb_configuration;"
to "struct necpb_context necpb_main_context".
to resolve naming conflicts with "struct XXX_config *XXX_conf;"
which describes platform-dependent configuration variants.
2001-06-13 15:18:27 +00:00
56197e330a
make vga frontend does same thing with pccons frontend
2001-06-13 15:12:28 +00:00
d54e67b2d3
add copyright notice
2001-06-13 15:12:02 +00:00
5738ad78e7
remove "cputype", introduce "struct jazzio_config *jazzio_conf;" to
...
describe platform-dependent variants. clean up jazz i/o interreupt
handling had device configuration information.
2001-06-13 15:11:38 +00:00
131e5819c3
remove "cputype", introduce "struct asc_config *asc_conf;"
...
to describe platform-dependent variants.
2001-06-13 15:10:35 +00:00
ceabf3273a
remove "cputype", introduce "struct btl_config *btl_conf;"
...
to describe platform-dependent variants.
2001-06-13 15:09:32 +00:00
bc0d30a90c
introduce "struct platform", and remove "cputype" variable.
...
this change also includes a patch to obtain secondary cache size
from ARC firmware by Bob Meader, which was posted on port-arc on 18 Aug 2000.
this should make NEC Express RISCserver work.
this change obtains ID of display controller from ARC firmware, too.
2001-06-13 15:08:05 +00:00
b7abba7794
split pccons driver into "pccons" and "opms",
...
also split into bus-dependent frontend and bus-independent backend.
2001-06-13 15:05:43 +00:00
226c44ecbc
use MI i8253reg.h instead of home grown one
2001-06-13 15:03:53 +00:00
ba6a3c6db5
split ISA bridge code into bus dependent frontends to remove "cputype"
...
variable.
2001-06-13 15:03:24 +00:00
c6eacfae15
split clock_mc.c into interval timer driver (timer) and
...
real time clock driver (mcclock)
2001-06-13 15:02:12 +00:00
c7b603e55d
split clock.c into interval timer part ("timer" for cpu_initclock) and
...
real time clock part ("todclock" for inittodr, resettodr)
2001-06-13 15:00:26 +00:00
33669543d9
remove algor related codes, because there is independent (and working!)
...
algor port now.
2001-06-13 14:58:38 +00:00
7a314c516c
enable device_register(9) on arc port to parse boot device name
...
passed by ARC firmware correctly.
2001-06-13 14:36:33 +00:00
68306a9bf0
Implement a db_trap_callback which turns off the watchdog on entry to DDB
...
and turns it back on on exit. Hook the callback in early in the boot, so
it's there as soon as DDB is available.
2001-06-13 12:34:24 +00:00
c03a48d64f
withough -> without
2001-06-13 10:45:57 +00:00
4553af4ee5
Add minimal support for vr4122/vrc4173 pci.
2001-06-13 07:32:47 +00:00
6b358ba879
remove interlan np100 entry as the referenced files don't exist
2001-06-13 06:43:08 +00:00
3df61fa9d9
Generic softintr for hpcmips.
2001-06-13 06:03:10 +00:00
18b2f7e6a1
Add a port to IBM's PPC405GP Reference Board (the "walnut")
...
by Eduardo Horvath and Simon Burge of Wasabi Systems.
IBM 4xx series CPU features:
- New pmap and revised trap handler.
- Support on-chip timers, PCI controller, UARTs
- Framework for on-chip ethernet and watchdog timer.
General PowerPC features:
- Add in-kernel PPC floating point emulation
- New in{,4}_cksum that is between 1.5 and 5 times faster than the
old version depending on CPU type.
General changes:
- Kernel support for generic dbsym-style symbols.
2001-06-13 06:01:44 +00:00
7e59a1be7a
No longer need MIPS3_5200 here.
2001-06-12 22:32:50 +00:00
02293e0ea7
Be prepared to get OpenFirmware client entry in either %o3 (PROM way)
...
or %o0 (our boot code passes romp in %o0 even for OF machines).
Discussed with pk.
2001-06-12 21:01:26 +00:00
ca5de264b4
Change the structure of a bus_space_handle_t in a desperate bid to avoid using
...
function pointers. It now contains two base addresses, one for 8-bit
transfers and one for 16-bit transfers. This should make it possible for me
to handle the Castle EtherSCSI card, which uses and address line to select
transfer width to the i82595.
2001-06-12 20:16:22 +00:00
2b283d77df
For arm ports where machine != arm??, descend into the cats,dnard,netwinder
...
directories and install their include files too.
2001-06-12 18:16:31 +00:00
6506d53f68
Nuke include files which are just <arm/foo.h>. Adjust Makefile accordingly.
2001-06-12 18:03:55 +00:00
d4dcda551f
Revert back to arm32 (for now).
2001-06-12 18:02:20 +00:00
12635e46a1
The machine is cats, the machine_arch is arm (not arm32).
2001-06-12 17:38:41 +00:00
0aff179f16
Eliminate all files that are just #include <arm.foo.h>. Update Makefile
...
to refer to cats, not netwinder.
2001-06-12 17:37:35 +00:00
f1d3ac74a5
Change comment.
2001-06-12 17:36:55 +00:00
66c1ffd9be
Remove cpu_dumpconf(); it's in powerpc_machdep.
2001-06-12 17:23:13 +00:00
713feac239
Include powerpc/mpc6xx/{bat.h,pte.h} if PPC_MPC6XX is defined.
2001-06-12 17:20:50 +00:00
bee211fc53
Move "file .../bus_dma.c" line to MD place.
...
Add options PPC_MPC6XX on missed ports.
XXX I think PPC_OEA is better name.
2001-06-12 17:13:34 +00:00
fa3621e3be
Move netwinder_machdep.c to files.netwinder. Eliminate opt_netwinder.h and
...
use #ifdef netwinder insead. XXX ebsa285_machdep.c should move to the cats
directory and files.cats
2001-06-12 17:10:25 +00:00
f8ce82f817
Another steps for ELF.
...
- register prefix
- machine/asm.h
- deprecated -T option for ld(1)
2001-06-12 16:57:27 +00:00
cbad4436c2
One more.
2001-06-12 16:32:00 +00:00
51a013241c
Make this compile w/o akbd or ukbd.
2001-06-12 16:29:07 +00:00
0a600be867
receive, not recieve
2001-06-12 15:17:10 +00:00
2a8c778f1b
retrieve, not retreive
2001-06-12 14:59:27 +00:00
3bd0afbc54
Make tracing of stack by frame argument work.
2001-06-12 13:22:06 +00:00
5335780e31
Support to get into DDB from hardclock interrupts by putting a value in
...
the RPB wait field.
2001-06-12 13:20:29 +00:00
8f96f4b21c
Fix problem where console interrupts never got enabled after RB_ASKNAME.
2001-06-12 13:18:38 +00:00
55e73f8bc1
I was too careless. Do not throw away the prepared string. :p
2001-06-12 11:29:31 +00:00
8f68bebb7e
Detect 4000/VLC correctly + make halt/reboot work.
...
From Michael L. Hitch (mhitch@montana.edu ).
2001-06-12 11:24:50 +00:00
5d6ce3b75c
Make this compile again.
2001-06-12 10:30:04 +00:00
b1b468a365
Remove unneeded whitespace.
2001-06-12 10:03:04 +00:00
be97fea093
Remove Makefile.cats. We now use the arch/arm/conf/Makefile.arm.
2001-06-12 08:33:48 +00:00
eb541612a0
Add cats specific makefile for tags and includes.
2001-06-12 08:32:46 +00:00
f90999bd42
Cats doesn't need io.h any more as it has it's own conf.c files.
2001-06-12 08:31:53 +00:00
a7b8789da8
Add cats specific autoconf and conf.c. Also add defopt NETWINDER to files.cats, this is so a few things that include opt_netwinder compile.
2001-06-12 08:30:47 +00:00
8c53bc98ee
comment out MEMORY_DISK_HOOKS, currently cats can only use an in-kernel memory disk.
2001-06-12 08:27:08 +00:00
0bdd2faeed
Get the opcode mask right for almost all the Op_OE opcodes (only two were
...
correct).
2001-06-12 05:31:44 +00:00
ba52d7a5d0
Always indirect through the "locoresw" to get the cache ops, since
...
there are just far too many combinations to handle with magic
#ifdefs in any sane way. Also, add a HitFlushDCache op to the
"locoresw", and fill it in as appropriate (it's NULL on MIPS-I,
so watch out).
These changes ensure that my R4600 Indy (with 2-way cache) gets
the correct cache ops when the kernel is built with only MIPS3
support, resulting in a kernel that is significantly more stable.
2001-06-11 23:52:38 +00:00
df452bb9b8
clean up some comments, per a request from sommerfeld
2001-06-11 22:56:26 +00:00
1825c7b68a
Move defopt FOOTBRIDGE to where it really should be in files.footbridge, which is where I should have left it.
2001-06-11 22:25:09 +00:00
ed72dec945
Remove locore dependancy on opt_netwinder and use the netwinder define from the command line.
2001-06-11 22:08:42 +00:00
8d1b187a4c
Fixed pte_print to display the correct names
...
for VME device pages.
2001-06-11 21:35:59 +00:00
6e5f704918
Now use hand-defined macros instead of relying
...
on structure layout to find registers. Added
a VME attachment.
2001-06-11 21:33:47 +00:00
0463a8a3d7
Replace magic numbers in trap code with offsetof()
...
Deal better with traps during register restore.
Explain a bit more about what's going on here.
2001-06-11 20:04:02 +00:00
bd73477f94
Parentheses around definition of PODULE_GAP.
2001-06-11 19:07:14 +00:00
95be56d2e1
Only include dependency on include-dirs if the include directory doesn't
...
exist.
2001-06-11 17:50:34 +00:00
ba4b09844f
Use command Makefile.arm. Move non-std LOADADDRESS to std.netwinder. Add
...
netwinder-specific inclusion Makefile.
2001-06-11 17:46:23 +00:00
d87a9f23c3
Add common Makefile for arm ports. Only include (for now) machine/io.h
...
if arm32 is defined. io.h is RISCPC specific and isn't needed for other
ports.
2001-06-11 17:44:38 +00:00
3d85ba9ab2
include-dir: A relative 'S' is up 4-levels.
2001-06-11 13:49:28 +00:00
afd5ba073b
Defopt FOOTBRIDGE.
2001-06-11 13:48:28 +00:00
c522c18479
Use NFB from "fb.h" to include console framebuffer support.
2001-06-11 13:34:51 +00:00
bf3fad1043
Split consinit functionality out of machdep.c into platform-specific
...
files. G/c include files for machdep.c
Only include dev/cninit.c in ofw-based kernels.
2001-06-11 11:56:57 +00:00
712d37e53b
G/C an unused parameter to isrdispatch_vectored().
2001-06-11 11:26:42 +00:00
9b0b23c664
Stack adjustment for autovectored interrupts wasn't quite right...
2001-06-11 11:24:40 +00:00
b20634eca1
Footbridge files have moved from arm32 to arm sub-tree.
2001-06-11 10:51:09 +00:00
43b992855b
Comment about start address of LED unit in vr4122.
2001-06-11 10:04:27 +00:00
a2c4938b03
not set HPCFB_SWAP_BYTE
2001-06-11 09:36:44 +00:00
c1922a2158
not set HPCFB_SWAP_BYTE.
2001-06-11 09:21:15 +00:00
1c426d533e
make GENERIC compile again.
2001-06-11 06:11:01 +00:00
48a9b87617
Move some struct definition into header file.
2001-06-11 06:04:55 +00:00
79524e25e0
- add comment about start address of PMU in vr4122.
...
- wrap long line.
- add regsiter offset found in PMU of vr4122.
2001-06-11 06:02:21 +00:00
d011344fca
Cosmetic changes; lineup some struct members.
2001-06-11 05:56:21 +00:00
1898d1dcc6
- make this file compile even if either hpcfb or vrkiu isn't included.
...
- introduce new cpp symbol VR_FIND_DRAMLIM not to probe dram beyound this.
for example, MP-C303 hangs hard if memoy beyond 0x03800000 is probed.
2001-06-11 05:52:21 +00:00
f81775f030
Cosmetic changes.
2001-06-11 05:24:06 +00:00
2bcc128c2b
Print space after colon.
2001-06-11 05:22:10 +00:00
3dabdff631
Cosmetic changes:
...
- Use tab instead of many spaces
- options<SPC><TAB>
2001-06-11 05:17:45 +00:00
49ba960b09
make this compile with DEBUG.
2001-06-11 04:58:33 +00:00
40ac848024
Fix various misspellings of compatible/compatibility.
2001-06-11 01:50:48 +00:00
83e47d5e8d
Revision line #1 broke, fixed.
2001-06-10 20:47:49 +00:00
b47f638d85
Check in work done by bjc@openbsd.org, OpenBSD revs 1.4 and 1.5 of the
...
same file. No other changes, OpenBSD log messages below.
> More EMODD work:
> - Using CVTDL and subtracting to seperate integer from fraction does
> not work if the integer is >32 bits long; instead, rearrange the bits
> into a quadword, use ASHQ to truncate, and then subtract.
>
> Also:
> - Set the condition codes properly; this fixes the other problem with
> >32-bit-integer parts in libm by letting modf subtract the fractional
> part (which *is* a double) to get the integral part in a double.
> - move the zero checks earlier in the routine
>
> - instead of 'ret' in zeroexit, use brw goback
> Switch a "BGTR foo" to a "BLSS bar; BRW foo; bar:". In this case, the
> difference between the BGTR and foo: is too large for a byte displacement.
> as should give an error or at least a warning here, but it doesn't;
> instead it merrily outputs a completely bogus displacement.
> This fixes problems with EMODD on numbers with negative exponents.
>
2001-06-10 20:46:18 +00:00
e29b0f085f
.type xxx,@function isn't supported under COFF
2001-06-10 19:06:26 +00:00
179dd3e579
sigh. It also helps to switch back to .text ...
2001-06-10 17:31:38 +00:00
b55c21bb0d
Copy in segment descriptors all at once rather than one at a time.
2001-06-10 17:30:41 +00:00
8561123ccf
-Wreturn-type is included in -Wall.
2001-06-10 17:05:11 +00:00
08fb0e543b
Pick the right bit to check...
2001-06-10 17:03:01 +00:00
8aad61265b
On 162 and up, get the CPU speed from the firmware and only fall back
...
to calculating it on the fly if the firmware's value is bogus.
This fixes problems caused by rounding errors on some board/speed
combinations.
2001-06-10 16:48:19 +00:00
aab2376d45
Refuse to boot on 162/172 and 167/177 if the user has not removed
...
the jumper which tells 1xx-Bug where to locate its scratch data.
Instead, print a message informing the user to RTFM (which needs to
be updated to include this info. ;-)
2001-06-10 16:45:52 +00:00
a3496ef8a8
When invoking the pcb_onfault mechanism, pass the return value of uvm_fault()
...
to the onfault routine.
2001-06-10 16:31:59 +00:00
29d06d028c
Fix printf format error.
2001-06-10 15:54:05 +00:00
7f2d136a9a
Remove options NMBCLUSTERS=1024 -- it's default now.
2001-06-10 15:41:13 +00:00
b736ff678e
Use machine/bat.h rather than powerpc/mpc6xx/bat.h.
2001-06-10 15:32:57 +00:00
afa0c16167
include powerpc/mpc6xx/bat.h.
2001-06-10 15:24:57 +00:00
bedfcf904c
libkern.h is included in systm.h. Not needed here.
2001-06-10 15:05:44 +00:00
89546c98a1
Enable DHCP and BOOTP as supported diskless NFS boot options.
2001-06-10 14:40:47 +00:00
967e648941
Use the versions of dev_net.[ch] in libsa in order to get DHCP support.
...
In other words, mvme68k's "netboot" finally supports DHCP.
2001-06-10 14:12:48 +00:00
8b0b4ecd3f
Forgot to commit this; s/offb/ofb/.
2001-06-10 13:56:13 +00:00
ea5249214a
Add rnd(4) pseudo-device.
2001-06-10 13:16:07 +00:00
9d87ee4b59
add MC-R700, 730 touch panel parameter
2001-06-10 12:37:43 +00:00
4911bdc582
Use ofb_softc again.
2001-06-10 11:38:21 +00:00
5a051092e4
Rename ofb_softc to ofbus_softc. (XXX Is this good name?)
2001-06-10 11:36:03 +00:00
f6482742de
pte_spill -> pmap_pte_spill.
2001-06-10 11:09:28 +00:00
6650a1901e
Use the new pmap to compile again (sorry).
2001-06-10 11:07:36 +00:00
fafb5d4bc3
Make the new pmap optional. Use the old (stable!) pmap by default.
2001-06-10 11:01:26 +00:00
53e9189ae7
oops; non-primary cpus should still spin, not jump to idle.
2001-06-10 10:50:20 +00:00
27c2892f13
Enable color! call in ofb_putcmap again.
...
Matt, please don't remove codes silently without confirmation.
(At least, leave a log message!)
2001-06-10 10:34:27 +00:00
be7629b7e0
Hand off intr evcnt responsiblity in a reasonable way on the 5064.
2001-06-10 09:28:26 +00:00
7c074dc806
Check in work-in-progress of generic ISA interrupt support. The
...
goal here is to get the P-5064 PCMCIA slots working, and serve as
the basis for P-6032 interrupt support.
PCMCIA interrupt auto-detection not working -- more work to be
done here.
2001-06-10 09:13:06 +00:00
82418a77b0
Add PCMCIA devices.
2001-06-10 08:45:09 +00:00
66822e55be
Fix a spl issues. Turn on PMAPCHECK until instability problems are found.
...
Add a pmap_pvo_verify call you call it from it ddb and verify the pmap
data structures are sound. Fix warnings when DEBUG was turned on.
2001-06-10 07:56:36 +00:00
perry