the generic layer 4 and layer 3 management system.
This should make the layer 4 driver API LKM clean - finaly.
Make the Fritz!PCI driver work again after resent changes (oops!),
noted by Frank Kardel (PR 15948) and Matthias Scheeler.
indicating an unhandled "command". ERESTART is -1, which can lead to
confusion. ERESTART has been moved to -3 and EPASSTHROUGH has been
placed at -4. No ioctl code should now return -1 anywhere. The
ioctl() system call is now properly restartable.
use "cp" instead of "ncp" as a temporary pointer into the SROM.
we still need the value of ncp here, it points to the next media block.
(update the copy of this code in tlp_21142_reset() just 'cause.)
this makes the BNC port on the Adaptec ANA-6911A work.
Add an ugly hack, #ifdef WI_AT_BIGENDIAN_BUS_HACK, to make the wi driver
access the underlying bus in big endian byte order.
This makes it possible to use this driver (probably one of the most
interesting ones) in the pcmcia slot of a stp4020 (nell) adapter at sbus. The
sparc ports bus_space_{read,write}_* macros do not provide a way to do this
cleanly now as they ignore the bus_space_tag_t parameter.
XXX - make bus_space_{read,write}_* on sparc do the right thing.
Audio-related stuff is left almost intact.
* support audiocs at ebus playback and capture
tested on krups and u5 (thanks, martin)
* make first attempt at supporting audiocs at sbus capture
* nb: full-duplex is not tested
* while here, fix CSAUDIO_MONITOR_MUTE to be of CSAUDIO_MONITOR_CLASS
i.e. outputs.monitor.mute -> monitor.monitor.mute
Ok by pk, eeh.
deal with shortages of the VM maps where the backing pages are mapped
(usually kmem_map). Try to deal with this:
* Group all information about the backend allocator for a pool in a
separate structure. The pool references this structure, rather than
the individual fields.
* Change the pool_init() API accordingly, and adjust all callers.
* Link all pools using the same backend allocator on a list.
* The backend allocator is responsible for waiting for physical memory
to become available, but will still fail if it cannot callocate KVA
space for the pages. If this happens, carefully drain all pools using
the same backend allocator, so that some KVA space can be freed.
* Change pool_reclaim() to indicate if it actually succeeded in freeing
some pages, and use that information to make draining easier and more
efficient.
* Get rid of PR_URGENT. There was only one use of it, and it could be
dealt with by the caller.
From art@openbsd.org.
it worked- but I ran into a case with a 2204 where commands were being lost
right and left. Best be safe.
For target mode, or things called if we call isp_handle_other response- note
that we might have dropped locks by changing the output pointer so we bail
from the loop. It's the responsibility of the entity dropping the lock to
make sure that we let the f/w know we've read thus far into the response
queue (else we begin processing the same entries again- blech!).
Allow SIOCSWAVELAN with WI_RID_IFACE_STATS to request
an immediate statistics update.
We might in the future want to have SIOCGWAVELAN with
WI_RID_IFACE_STATS return an error if a statistics gathering is in
progress. Then the caller could request fresh statistics and gather
them when they are done. Instead, we currently just return whatever
statistics are available, which may be up to 60 seconds old.
this partially addresses pr14385.
there is still a byte swapping bug retrieving the
stats structure. Since both the type and the length
are incorrectly swapped, we would timeout while reading
an extra long section (caused by the byteswapped length)
of garbage data.
turning on WI_DEBUG now just reports the unknown info type
which can be seen to be obviously incorrectly swapped
on macppc
locations. If passed NULL, the old behaviour using bus_space_{read,write}_1()
is used. Otherwise, all access to the chip goes via the MD functions.
This is necessary for mvmeppc boards where the mk48txx NVRAM/RTC is not
directly addressable.
Distinguish between 2312 and 2300 cards (they *are* different). Enable
RIO (Reduced Interrupt Operation) for the LVD cards (hey- I've seen
batched completions of the 30 commands at a time with this,....)...
If we get a Port Logout on local loop topologies, we have to force the
f/w to log back in. The easiest way (for us) to do this is to force
a LIP. This also will wake up the disk that probably just had a f/w crash.
Implement mailbox 'continuations'- this allows interrupts to re-drive
a mailbox command if it's one that just essentially repeats the previous
mailbox command (e.g., f/w download). This saves a boatload of sleep/wakeup
twitches.
If we're not a 2300 and we're about to return with a 'bogus interrupt'- check
the semaphore register to be non-zero at all and outgoing mailbox 0- this
seems to be where some of the lost ISP1080 commands came from.
pairs. Without this, the interrupt handler will steal the "command completed"
status and wi_cmd will busy loop until it times out.
Add some error output to make failure modes like this more prominent.
This should fix PR 14559.
;
Implement wi_scan into wi.c.
forces if_wi to initiate one round of access point scan.
This code was written by jrb@cs.pdx.edu, modified and bug-fixed by ichiro@netbsd.org
flag and a callback function which gets called whenever a target is
selected on a channel.
The macppc wdc driver needs to reprogram its timing register
differently for each target on a channel each time that target is
selected. I also changed the ATA4_TIME_TO_TICK to use a divisor of
15, which brings our timing calculations consistent with darwin.
These patches fix problems on my dual usb ibook with combo dvd/cdrw
drive because the hard drive supports udma and the combo drive does
not. Without turning off the udma timings in the configuration
register, I cannot access the non-udma combo drive.
firmware to delay completion of commands so that it can attempt to batch
a bunch of completions at once- either returning 16 bit handles in mailbox
registers, or in a resposne queue entry that has a whole wad of 16 bit handles.
Distinguish between 2300 and 2312 chipsets- if only because the revisions
on the chips have different meanings.
Add more instrumentation plus ISP_GET_STATS and ISP_CLR_STATS ioctls.
Run up the maximum number of response queue entities we'll look at
per interrupt.
If we haven't set HBA role yet, always return success from isp_fc_runstate.
Also make the interrupt handler for older 3com cards look like the xl one.
I.e. don't ack the interrupt latch bit before checking if it is set.
At the same time, introduce constants for the watched interrupts, so that
we don't copy them all over the place.
podulebus Ethernet cards. This replaces the NE2000 memory-access routines
with ones that don't try to transfer more than 255 bytes at a time.
This code should perhaps be merged into ne2000.c, but presumably most NE2000
clones won't need it.
the response queue. Instead of the ad hoc ISP_SWIZZLE_REQUEST, we now have
a complete set of inline functions in isp_inline.h. Each platform is
responsible for providing just one of a set of ISP_IOX_{GET,PUT}{8,16,32}
macros.
The reason this needs to be done is that we need to have a single set of
functions that will work correctly on multiple architectures for both little
and big endian machines. It also needs to work correctly in the case that
we have the request or response queues in memory that has to be treated
specially (e.g., have ddi_dma_sync called on it for Solaris after we update
it or before we read from it).
One thing that falls out of this is that we no longer build requests in the
request queue itself. Instead, we build the request locally (e.g., on the
stack) and then as part of the swizzling operation, copy it to the request
queue entry we've allocated. I thought long and hard about whether this was
too expensive a change to make as it in a lot of cases requires an extra
copy. On balance, the flexbility is worth it. With any luck, the entry that
we build locally stays in a processor writeback cache (after all, it's only
64 bytes) so that the cost of actually flushing it to the memory area that is
the shared queue with the PCI device is not all that expensive. We may examine
this again and try to get clever in the future to try and avoid copies.
Another change that falls out of this is that MEMORYBARRIER should be taken
a lot more seriously. The macro ISP_ADD_REQUEST does a MEMORYBARRIER on the
entry being added. But there had been many other places this had been missing.
It's now very important that it be done.
For NetBSD, it does a ddi_dmamap_sync as appropriate. This gets us out of
the explicit ddi_dmamap_sync on the whole response queue that we did for SBus
cards at each interrupt.
Set things up so that platforms that cannot have an SBus don't get a lot of
the SBus code checks (dead coded out).
Additional changes:
Fix a longstanding buglet of sorts. When we get an entry via isp_getrqentry,
the iptr value that gets returned is the value we intend to eventually plug
into the ISP registers as the entry *one past* the last one we've written-
*not* the current entry we're updating. All along we've been calling sync
functions on the wrong index value. Argh. The 'fix' here is to rename all
'iptr' variables as 'nxti' to remember that this is the 'next' pointer-
not the current pointer.
Devote a single bit to mboxbsy- and set aside bits for output mbox registers
that we need to pick up- we can have at least one command which does not
have any defined output registers (MBOX_EXECUTE_FIRMWARE).
Explicitly decode GetAllNext SNS Response back *as* a GetAllNext response.
Otherwise, we won't unswizzle it correctly.
Nuke some additional __P macros.
we call the configuration function. Thanks lennard for pointing it out.
XXX: Someone should look this over and make sure that the current strategy
makes sense.
- move some functions from ata.c to ata_wdc.c or wdc.c.
- add callbacks to struct ata_bustype so that wd.c doesn't call directly
functions from the lower level driver.
kill ata_atapi_attach. Change atapibus to use a struct scsipi_channel instead
of ata_atapi_attach as attach arch. Create a ata_device, compatible with
scsipi_channel, to attach wd.
for the i82596 PORT access interface, from the documentation
for that chip. These help clarify writes to the SYSBUS
part of the SCP, and PORT usage by i82596-aware drivers.
- replace opt_kgdb_machdep.h with opt_kgdb.h
- defparam opt_kgdb.h:
KGDB_DEV KGDB_DEVNAME KGDB_DEVADDR KGDB_DEVRATE KGDB_DEVMODE
- move from opt_ddbparam.h to opt_ddb.h:
DDB_FROMCONSOLE DDB_ONPANIC DDB_HISTORY_SIZE DDB_BREAK_CHAR SYMTAB_SPACE
- replace KGDBDEV with KGDB_DEV
- replace KGDBADDR with KGDB_DEVADDR
- replace KGDBMODE with KGDB_DEVMODE
- replace KGDBRATE with KGDB_DEVRATE
- use `9600' instead of `0x2580' for 9600 baud rate
- use correct quotes for options KGDB_DEVNAME="\"com\""
- use correct quotes for options KGDB_DEV="17*256+0"
- remove unnecessary dependancy on Makefile for kgdb_stub.o
- minor whitespace cleanup
If we get a completion status of RQCS_QUEUE_FULL, it means
that the internal queues are full. Other QLogic boards set
the QFULL SCSI status. But *nooooooooooo*, not the 2300.
gem_mediachange(). This will cause gem_mii_statchg() to be called
by the MII layer with the correct MII media state, so that speed
duplex parameters will be set properly.
8 port chip. this is used in several sbus (sparc) serial boards, as
well as an 8 port isa card from riscom. sio16 (sbus) frontend coming
shortly.
this is heavily based on the com and zs drivers.
(1) Add an IOCTL to tell the Lucent based cards how often to
do an access point scan. These results are returned by
calling another IOCTL to get the most recent scan data.
This function works with prism2 cards as well, but the
data is returned in a different format, or perhaps it is
data only for the closest access point.
(2) For prism2 cards, add the ability to put it into LAN monitor
mode, where (via BPF) all packets can be received. This
mode works best with "wiconfig wi0 -p 3 -f ?" to put the
card into pseudo-IBSS mode (to keep it from channel-hopping
and scanning for access points) and to set the frequency of
the AP you wish to monitor.
The returned data has a partial wi_frame header (down to the
wi_dat_len field) followed by the raw data of the packet.
I have and will put up on http://www.flame.org/NetBSD/wireless/
some simple utilities which do some perhaps interesting things,
like scan for access points, capture packets, etc.
XXX: FH chanset should be calculated by FH hop pattern, but BayStack 650 AP
always specify chanset to fixed value 1. The previous code try to this
hack into awi driver, but it is insufficient because the chanset value
in awi driver may change while scan and it may be different from the
value in receiving beacon/probe-response. So we save encoded FH chanset
into channel in 802.11 common bss information for now.
if_ieee80211subr.c, which can be shared between any IEEE 802.11
drivers.
However, most of current working IEEE 802.11b wireless LAN cards
have rich firmware and we cannot have a control to management frames
for such cards.
IBSS creation is now supported for the awi driver.
IIR_NOPEND if the TXRDY condition is true. Apparently, other chips do
not take TXRDY into account in the IIR_NOPEND case.
Also remove useless assignment (iir = IIR_NOPEND;) in one case.
No response from patch posted on tech-kern 29Aug2001.
Temp work around problems where if we allow for non-polled mailbox commands
we got nailed by hardclock calling is for a timed thaw. Basically, this
means we only enable non-polled mailbox commands in the FC kthread when it
calls isp_fc_runstate.
attributes of some variants of FC f/w (SCCLUN or not). Fake f/w
rev for SBus cards- the f/w versions we're using don't return
version in outgoing mailbox registers like they should.
-apply the patch from PR kern/13117 (Onno van der Linden) to make the
hardware cursor disappear more thoroughly
-deal with PR kern/13573: hardware cursor too big, but differently:
we have to obey the font size actually used. At this point, fix the
problem that the cursor got messed up by the initialization of
unrelated screens.
-unref font(s) if a screen is deleted, so they could be unloaded
if dev/wsfont supported it
-add missing pieces to support screen types with font sizes != 8x16
as system console - now
options VGA_CONSOLE_SCREENTYPE="\"80x50\""
options FONT_VT220L8x8
gives you what you'd expect
compiled-in or runtime loaded fonts,
keep font pointers in a LRU queue and load into the adapter on demand,
so we can have more fonts in use than physical font slots
CAUTION: font loading through the wsdisplay device directly into the
adapter doesn't work anymore!
in how interrupts are down- the 23XX has not only a different place to check
for an interrupt, but unlike all other QLogic cards, you have to read the
status as a 32 bit word- not 16 bit words. Rather than have device specific
functions as called from the core module (in isp_intr), it makes more sense
to have the platform/bus modules do the gruntwork of splitting out the
isr, semaphore register and the first outgoing mailbox register (if needed)
*prior* to calling isp_intr (if calling isp_intr is necessary at all).
little-endian byte-order. This should work out to be a no-op
for LE systems, and allows BE systems to use the board.
Tested on PPC, reviewed by Dante.
NOTE: The board/microcode does have a BIG_ENDIAN mode of operation,
but it's not well-documented. That might be interesting to investigate
at some point in the future, though.
- cominit() is local to com.c, remove prototype from comvar.h.
- Don't prototype comstop(), cdev_decl(com) does this.
- Don't use a block device switch table declaration(!).
- No need to include "com.h".
using level triggered interrupts, which livelocks calling intr routine
if the data register is not read in the interrupt routine, as it's case
when polling after interrupts are enabled during boot.
Block all interrupts when polling for keypress, and modify intr routine
to read and store value from data register. The latter one is to avoid
losing a keypress when one would manage to press a key when kernel is
not in spl-guarded code section.
Tested with classic pccons, 'pcconskbd at pckbc' and 'pckbd at pckbc'
configurations, on i386.
- minor code cleanups
- rename some functions for better consistensy/clarity
- consolidate extended message generation into new function
- a couple of minor code clarifications to eliminate extra return
statements and make absolutely sure actscb is NULL during a reselect
tag handy and we are going to need more of it in pckbc_poll_data1() soon,
change pckbc_poll_data1() to accept it as first arg. iot, ioh_d, ioh_c are
no longer passed separately. Use fabricated pckbc tag for calls from
arch/arc/jazz/pckbc_jazzio.c and dev/isa/pckbc_isa.c.
