de65671490
Ported to the sun3x by Jeremy
1997-03-13 17:52:44 +00:00
ee531cb3c9
s/sun3x_/_/ in sun3x_(round|trunc)_(page|seg) macros
1997-03-13 17:40:33 +00:00
711486fd1b
Fix a typo (oops).
1997-03-13 17:14:45 +00:00
24120736d8
Import the sun3 version of this on the "vendor branch".
1997-03-13 16:27:27 +00:00
f3952a7326
No longer need to override DEFS
1997-03-13 16:19:01 +00:00
032d13fc7d
s/sun3_/_/ in sun3_(round|trunc)_(page|seg) macros
1997-03-13 15:58:49 +00:00
e4a48696a6
Add member to bitmap struct that gives the size of mappable memory.
1997-03-13 12:37:08 +00:00
d8319f5c75
remove leftover from switch to the mi kgdb interface.
1997-03-13 10:25:25 +00:00
c6d2740564
Integrate Phil Budne's latest changes to the scn driver. From his README:
...
* Uses Counter/Timer dynamicly for rate generation; You can
have both 19200 and 38400 on one duart, and 57600 on another!
* Improved scninfo program to dump driver internal information.
implemented counters for parity err, framing err, break
* Delays changes until transmitter idle to avoid "glitches"
* Cleaned up scn_softc member names
* Untested support for sc26c92 (I don't yet have any to test with);
+ Will use alternate rate tables (include 115.2kbps and 230.4kbps)
+ Will raise FIFO rx interrupt threshold and watchdog timer
at higher rates.
+ Unknown (to me) how fast pc532 MC145406 driver chips can go
NOTE: It seems like it may be a BAD idea to use a sc26c92 as
a console port for now; the PROM doesn't know to reset the
chip back to scn2692 mode!!
1997-03-13 10:24:14 +00:00
8229701876
oops, don't need trap.h here anymore
1997-03-13 09:29:03 +00:00
72ba35e689
Don't genassym the trap type values; just include <machine/trap.h>
1997-03-13 09:27:21 +00:00
deeac396e7
Use genassym.sh to facilitate cross compiling.
1997-03-13 09:24:21 +00:00
f6d3f6c93b
Use the script version to facilitate cross compiling.
1997-03-13 09:22:19 +00:00
8147d1718f
fix various AD1848/PSS misfeatures; from Jason Baker in PR kern/2045.
...
also did some misc cleanup of my own.
1997-03-13 08:34:49 +00:00
4913ba5369
V_SWTCH is no longer needed.
1997-03-13 04:37:20 +00:00
2f18f33d16
Use genassym.cf, to support cross-compiling.
1997-03-13 04:22:05 +00:00
a15ede807a
add entries for isp, as isp* at pci? dev ? function ?, for Qlogic ISP 10x0
...
PCI SCSI controllers. Also, add the attached SCSI busses.
1997-03-13 04:15:24 +00:00
e36a5ca4de
change microcode array definitions from "unsigned short" to the more
...
correct u_int16_t, and remove bogus casts that the old definition
required.
1997-03-13 04:07:44 +00:00
919efaeb60
Make the microcode table const.
1997-03-13 03:33:03 +00:00
f385ef3e0f
Probe linux emul before svr4 emul. From Christos.
1997-03-13 02:55:25 +00:00
b0c4e068d0
Modify audio_fill_silence() to take an encoding number rather than a softc*
...
and mode.
1997-03-13 02:45:07 +00:00
ac3b8b13b7
Don't share the silence block between devices. Make silence filling work for
...
more encodings, and make it device-independent. From Lennart Augustsson, in
PR kern/3305.
1997-03-13 02:19:32 +00:00
5f0d034532
include <vm/vm.h> for vtophys() on x86. kill extra <sys/kernel.h> incl.
1997-03-13 01:56:06 +00:00
9733b260cd
Add a match for the ESS1868; from herb...
1997-03-13 01:45:11 +00:00
85068c2512
add ahc and bha at EISA
1997-03-13 01:15:52 +00:00
d999d514ce
make these compile (and hopefully run; they're untested) on the Alpha
1997-03-13 01:10:34 +00:00
8aa5282c68
clean up the __BROKEN_INDIRECT_CONFIG chunks of the last change
1997-03-13 01:04:02 +00:00
96153388c0
add in the 'isp' device, for Qlogic ISP 1020-based Sbus SCSI board support
1997-03-13 00:46:13 +00:00
13a313fd8d
add entries for ahc and bha PCI devices. clean up some
1997-03-13 00:43:37 +00:00
4c654c0acf
fixes from Matt Jacob so that these can compile and run on the Alpha.
...
(aic7xxx has been tested and works on the Alpha, bha has not yet been
tested on thne Alpha.)
1997-03-13 00:38:48 +00:00
9ceaaf3e7b
Turn off "cache pagetables bit" on non-MXCC modules.
1997-03-12 22:52:19 +00:00
b8d7e3deab
No longer needed.
1997-03-12 22:40:07 +00:00
8f8b0d91e5
Remove bogus use of splhigh(), and apparently unneeded bzero().
1997-03-12 22:31:37 +00:00
2330e40bc9
enable Matt Jacob's ISP 10x0 driver, now that it's in the source tree.
1997-03-12 21:50:15 +00:00
8c689e6477
Copyright notice consistency, per Matthew Jacob.
1997-03-12 21:09:43 +00:00
cf26d31ad2
NetBSD RCS ID tweaks, a few comment block tweaks. Also, make copyright
...
notices consistent (per Matt Jacob).
1997-03-12 21:06:41 +00:00
099e30a322
ISP 10x0 driver from Matthew Jacob of NASA Ames Research Center.
...
(March 12, 1997 version).
1997-03-12 20:44:50 +00:00
e775167e27
Update to ppp-2.3b4; from Paul Mackerras
1997-03-12 20:26:46 +00:00
7fb73fe0b2
Fix error in computation of BSS size when clearing it.
1997-03-12 19:49:11 +00:00
2bbaeef8cc
Fast and dirty fix to avoid panics during autoconf of KFQSA DSSI disks.
...
Controller errors showing up can't be handled anyway.
1997-03-12 19:42:30 +00:00
0daaaa0fc2
add kn8ae CPU support to GENERIC kernels. Also, add kn8ae devices.
...
Add "isp", "ahc", and "bha" config lines, but comment them out until
their sources are in the tree and/or their alpha patches are in the tree.
1997-03-12 19:29:14 +00:00
ffba332bb5
AlphaServer 8200 & 8400 support, including CPU specific details, TurboLaser
...
system bus support, and KFTxx support. From Matthew Jacob, NASA Ames
Research Center.
1997-03-12 19:19:54 +00:00
265be6d839
enabled SQWE as well as PIE in reg B.
1997-03-12 19:13:20 +00:00
a92ec8002e
Enable COMPAT_M68K4K.
1997-03-12 18:33:09 +00:00
8e4a126035
Use `mcxx' from cpuinfo instead of re-consulting the MMU registers
1997-03-12 15:44:28 +00:00
0d71b22d50
Use genassym.cf
1997-03-12 15:17:13 +00:00
3e35754576
Added genassym.cf
1997-03-12 15:16:35 +00:00
12331eb691
Fix typo of PR/3319
1997-03-12 13:53:14 +00:00
2adb2cb776
Add NOATIME to the visible flags (statfs, fstatfs).
1997-03-12 12:09:47 +00:00
6e3c9f3b59
Make sure to disable interrupts in the Interrupt Enable register as soon
...
as we've mapped it.
1997-03-12 11:04:35 +00:00
gwr