92e327c226
Match PNP0320 (Japanese 106-key keyboard A01).
...
- We could use this information to determine the default keymap (?)
- Match more keyboards? (e.g.strncmp(idstr, "PNP03", 5))
2001-03-31 09:20:40 +00:00
5e2f81a0cf
Regen.
2001-03-31 09:08:06 +00:00
27fcb60ea5
Add Cyrix products (MediaGX).
2001-03-31 09:06:45 +00:00
5f670bebfc
Initialize the entire pmap table before populating it.
...
This addresses pr 7174
Thanks to Christian Limapch for diagnosing the problem.
2001-03-31 09:05:21 +00:00
c13ba16f2b
Fix an uninitialized variable reference in cpu_fork().
...
Reported by Tad Hunt <tad@entrisphere.com>.
2001-03-31 07:50:59 +00:00
41833a3286
comment out device register structure definitions, used for reference only.
...
remove unnecessary BUS_SPACE_MAP_LINEAR when mapping ethernet dma registers.
2001-03-31 06:56:54 +00:00
5f3d9f1da2
Add driver for AT1720 MCA cards. This uses generic MB86960 support code,
...
and shares some bits with ISA AT1700 driver. Gee, this one was really
easy :)
This card turned out to be quite good performer - I get about 360KB/s
on 386DX PS/2 machine, which is best of all supported cards so far.
Tested with AT1720T, card donated by David Brownlee.
2001-03-31 00:43:05 +00:00
803c0c7eda
Add driver for AT1720 MCA cards. This uses generic MB86960 support code,
...
and shares some bits with ISA AT1700 driver. Gee, this one was really
easy :)
This card turned out to be quite good performer - I get about 360KB/s
on 386DX PS/2 machine, which is best of all supported cards so far.
2001-03-31 00:43:04 +00:00
2ceebb6c0e
Remove unnecessary test of tp->t_linesw against NULL; they are results
...
of confusion while correcting compilation error after t_line is
replaced with t_linesw.
2001-03-31 00:35:21 +00:00
6f8f19b16e
fix typo in comment
2001-03-31 00:30:22 +00:00
592dfdc76b
Prepare for MCA attachment:
...
* split off sharable stuff to dev/ic/ate_subr.[ch], move ate(4) device
definition to conf/files
* cosmetic: attach with ate_isa
2001-03-31 00:26:53 +00:00
d04f4ebff1
WSDISPLAY_FONTENC_SONY is gone.
2001-03-31 00:14:32 +00:00
6b982beac1
Call softintr_init()
2001-03-31 00:10:03 +00:00
3e4cc841a7
Add softintr and ISA bus support
2001-03-31 00:08:34 +00:00
a03b2aaaf0
Reverse previous commit - isa headers don't belong in /usr/include
2001-03-31 00:05:57 +00:00
d3a8b4016e
Add isa_machdep.h and isapnp_machdep.h
2001-03-30 23:59:19 +00:00
0ca4ab64ac
Add ISA serial port device
2001-03-30 23:54:45 +00:00
9641e5d860
Probe ISA bus devices
2001-03-30 23:52:05 +00:00
dd068f675e
Changes to interrupt architecture for softintr support
2001-03-30 23:51:14 +00:00
cdba0ef41c
Add some ISA bus cards
2001-03-30 23:49:37 +00:00
7cf783665e
Please preserve copyright notices modified by Ben Harris since the a.out and
...
ELF structure loadings are of his design from BBBB
2001-03-30 23:49:06 +00:00
1b6e2e02dd
Add files for ISA bus and softintr support
2001-03-30 23:47:58 +00:00
8cd59636b4
Support for ISA expansion slot in Mips 3230
...
The ISA Bus on this machine doesn't support DMA, and all interrupt lines
are wire-OR'ed together. Mileage may vary if sharing interrupts.
Tested cards:
com: 8250 and 16550 UART's (8 bit)
ec: 3com Etherlink II (8 bit)
we: SMC 8013 Ethernet (16 bit) [work in progress]
Probes, ARP in both directions works, sends clean packets,
tcpdump show correct packets on receive, NDP for IPv6 works,
netstat -s shows nothing strange.. but doesn't talk TCP/IP!
2001-03-30 23:45:18 +00:00
7d798b3ef7
Initial ELF kernel loading for RiscPC/A7000/NC based on Ben Harris's work
...
Since arm32 isnt switched to ELF yet its not completely tested; It loads
a kernel but then hangs on symbol table loading; propably a ELF/a.out
symbol table conflict.
Also cleaned up the code a bit
2001-03-30 23:44:58 +00:00
154a3bba69
use MI softintr
2001-03-30 23:28:00 +00:00
5d03735614
Move most interrupt functionality to arch/mipsco/mipsco/interrupt.c
...
Remove old style soft interrupts to favor MI softintr support
2001-03-30 23:26:29 +00:00
09d79c4b1f
New data structures and prototypes for MI softintr support
2001-03-30 23:23:37 +00:00
273d283d25
Implement MI softintr functions (softintr_establish, softintr_schedule etc)
2001-03-30 23:21:30 +00:00
9477a9256c
Re-implement bus_space(9) functions:
...
- Correctly handle striding of data
- Better support for endian neutral access
- Correctly implement _stream variants of bus_space functions that can
byte swap. This reverses the automatic byte swapping done in hardware
for 16 bit ISA bus cards
2001-03-30 23:17:03 +00:00
49b162566a
Bump va_blocksize for the map files some more, so that programs with
...
quite a few mappings have a chance of being handled correctly if
st_blksize is looked at.
2001-03-30 20:25:11 +00:00
a22b0cbf4d
Optimize bswap16() and bswap32() functions to inline assembly.
2001-03-30 20:00:05 +00:00
9f531a91bb
regen - use linux_sys_nosys() instead sys_nosys()
2001-03-30 18:33:22 +00:00
bbe1ee69af
Use linux_sys_nosys() instead sys_nosys() here too.
2001-03-30 18:31:28 +00:00
02281ec1f5
regen
2001-03-30 18:02:28 +00:00
c51fe2a452
use UNIMPL instead of NODEF for the dummy syscalls 218, 219
2001-03-30 18:01:20 +00:00
36a42f0ce8
Add new syscalls from Linux 2.4.3 to the lists. Not implemented ATM.
2001-03-30 17:59:46 +00:00
95fda43dd5
make all debugging messages conditional on sc->sc_debug.
2001-03-30 17:30:18 +00:00
e07a93ab5a
regen
2001-03-30 17:18:47 +00:00
890850dddf
Implement linux_sys_nosys() and use it instead of sys_nosys() for
...
unimplemented syscalls. Difference is that linux_sys_nosys() doesn't
post SIGSYS to the process. Linux doesn't do that and thus glibc (and
probably other Linux code) doesn't deal with SIGSYS, even through it
generally contains fallback code for ENOSYS case.
This also addresses port-i386/12503, though the issue was already discussed
earlier.
2001-03-30 17:16:33 +00:00
466a79b36b
Make it possible to use different function for unimplemented syscalls
...
than sys_nosys().
2001-03-30 16:56:36 +00:00
30b7c151f0
AEN 0x000c appears to mean `init started'. From lukem.
2001-03-30 16:48:57 +00:00
7cd0069dfc
Make this compile without com.
2001-03-30 16:32:02 +00:00
c5496871db
fix comment.
2001-03-30 15:59:17 +00:00
28f83415ad
Update TODO list.
2001-03-30 15:53:25 +00:00
6a18583c73
Add yds.
2001-03-30 15:23:44 +00:00
a9a5dcd043
Add yds at pci and children.
...
Alpha and i386 are the only tested ports.
2001-03-30 14:47:48 +00:00
537038859e
Yamaha YMF724/740/744/754 (DS-1) PCI audio driver.
2001-03-30 14:32:08 +00:00
42e44c1408
Make Sony's fonts ISO8859-1 compliant.
2001-03-30 13:06:45 +00:00
8b733f7126
Our INCSDIR has been pruned from distrib/sets, so don't make it any more.
2001-03-30 12:42:30 +00:00
355086c412
The `speed' statistic from the RNG was brought to you by the letter `B' and
...
the letter `S'. I don't think anyone will miss it.
2001-03-30 12:05:02 +00:00
a6a587a71e
Track prototype change to isa_fillw() that avoids passing u_short as an arg.
2001-03-30 11:21:33 +00:00
92969654c0
enable FAKE_LOOPBACK_IF case by default.
...
now traffic on loopback interface will be presented to bpf as normal wire
format packet (without KAME scopeid in s6_addr16[1]).
fix KAME PR 250 (host mistakenly accepts packets to fe80::x%lo0).
sync with kame.
2001-03-30 11:08:56 +00:00
5ba1d71d33
Don't reference nonexistent register on R96. (and maybe R94 too)
2001-03-30 09:10:48 +00:00
70a7bcb64b
Remove ncr53c9x_dmaselect
2001-03-30 07:49:07 +00:00
dbcd4b8d03
fix constness of IN6_{IS,ARE}_xx with RFC2553. sync with kame.
2001-03-30 05:53:52 +00:00
2e64bebd3b
For -o linux mounts, add some code to emulate /proc/#/maps.
...
Needs NAMECACHE_ENTER_REVERSE to include filenames.
2001-03-29 22:41:52 +00:00
87d29abbf0
defopt NAMECACHE_ENTER_REVERSE
2001-03-29 22:40:06 +00:00
2c310ee4d5
Depending on the NAMECACHE_ENTER_REVERSE option, always enter reverse
...
mappings (vnode -> name) in the reverse mapping hash table. Without
this option, there is no change; only directories will be entered to
speed up getcwd. This is an option because it will cause getcwd
to hit longer hash chains, and at the moment its usefulness is
still limited.
2001-03-29 22:39:23 +00:00
a8aa96fa2d
Pay lip service to old sources and provide SHM_[RW] (note that these
...
are not even part of the SVID4); per discussion with Thomas Klausner.
2001-03-29 21:16:06 +00:00
cce60f68dc
Added.
2001-03-29 21:07:56 +00:00
f6ec9b4ab2
On an 80C04, try not to start reads at addresses of the form xx,ea, xx,ee, or
...
xx,f0. This appears to heavily alleviate, but not to eliminate entirely,
the problems I've been seeing with garbage being read from the rx buffer.
I suspect the real solution lies elsewhere.
2001-03-29 20:49:44 +00:00
d6b50e1598
add fas configuration
2001-03-29 18:54:58 +00:00
2f6fd6b040
Print a warning message when the DMA FIFO fails to fill or empty before we
...
time out.
2001-03-29 17:46:39 +00:00
6386dedebe
When attached, do not change brightness if the value is zero.
2001-03-29 17:44:50 +00:00
cc5ddb2b20
Make `trace' useful even w/o symbols and add /f option to dump parameters.
2001-03-29 14:58:08 +00:00
35fd1893df
set debug level via patchable variable, and fix some debug printf warnings
2001-03-29 10:51:16 +00:00
46d4ad76ad
mnt_stat is not a pointer
2001-03-29 10:47:44 +00:00
879b34ea8c
Don't do the ioctl call for the get hw addr case, all the work has
...
been done already.
2001-03-29 10:37:37 +00:00
6db03feca9
Remove unneeded #includes
2001-03-29 08:56:27 +00:00
2a2070aec3
kill bunch of unneeded includes
2001-03-29 08:48:55 +00:00
fb96b4d88c
Added.
2001-03-29 04:58:52 +00:00
22a64b5a3e
Added.
2001-03-29 04:35:09 +00:00
fbd8636feb
Added.
2001-03-29 04:16:21 +00:00
da500dc6be
Removed some sun3 references.
2001-03-29 04:07:54 +00:00
1c9cc1b092
use NCR_F_DMASELECT instead of ncr53c9x_dmaselect
2001-03-29 03:30:19 +00:00
ae964a3f9b
use NCR_F_DMASELECT instead ncr53c9x_dmaselect
2001-03-29 03:26:52 +00:00
6095b6e2ff
Added.
2001-03-29 03:24:19 +00:00
0640ad6ace
When the endians are little, they are little.
2001-03-29 03:23:33 +00:00
b0605f71d5
fas support added
2001-03-29 02:58:38 +00:00
3eb7866aaa
Added support for the 68010 bus error frame.
2001-03-28 23:08:15 +00:00
718d1ed83c
add UMCT_DEBUG option
2001-03-28 19:00:39 +00:00
2c750ca482
add umct device name
2001-03-28 18:48:01 +00:00
a8c0b619da
support umct USB-serial device
2001-03-28 18:45:07 +00:00
19c0a21aaa
support USB-RS232 Converter of Magic Control Technology Corp.
...
More information about this product found at http://www.mct.com.tw
2001-03-28 18:42:13 +00:00
4b8789fde8
regen
2001-03-28 18:36:32 +00:00
6724d33a12
add PID Sitecom USB-232 adapter and D-Link DU-H3SP USB BAY Hub
2001-03-28 18:36:07 +00:00
676bacb4ea
include "opt_ddb.h" explicitely
2001-03-28 18:03:49 +00:00
7f28cbe9dc
Fix an obvious typo.
2001-03-28 17:33:07 +00:00
bb73804714
add NetBSD RCS id again
2001-03-28 17:22:51 +00:00
2815a110f3
add NetBSD RCS id
2001-03-28 17:08:29 +00:00
fdce371144
objcopy -> ${OBJCOPY}
2001-03-28 17:04:44 +00:00
864a597f2d
Define ${OBJCOPY}.
...
XXX: Should we use ${CROSSDIR} here or not?
2001-03-28 17:03:48 +00:00
adf9edcd41
update for miidevs changes
2001-03-28 14:16:49 +00:00
3752421a75
regen
2001-03-28 14:15:23 +00:00
2deceb396c
Brought up-to-date with revision 1.124 of the Sun3 pmap.
2001-03-28 14:15:11 +00:00
bf6a2bf86c
adapt to corrected OUI calculation
2001-03-28 14:14:57 +00:00
9e8def737f
Reading the IEEE specs shows that the bits have to be reversed when
...
mapping an OUI to the MII id registers.
Doing this in the MII_OUI() macro would be too complex, so put it into
a helper function and move the MII id register interpretation stuff
into miivar.h.
2001-03-28 14:13:06 +00:00
a8cd6c5401
Added.
2001-03-28 13:47:58 +00:00
5677634e50
Small comment correction.
2001-03-28 13:04:57 +00:00
0b01b5a5b6
build CHILD_MAX to 160. 80 has proved consistently not enough.
2001-03-28 08:45:34 +00:00
minoura