- The driver now uses the Super I/O address port as port argument in
the configuration file. The Environmental Controller base address is
fetched by the Super I/O EC LDN configuration registers.
- Invalidate voltage sensors if data returned is 0xff.
- Use the Super I/O Global Configuration Registers Chip ID[12] and Device
Revision to store/print the correct information.
- Use only the Fan Extended Tachometer registers on IT871[68]F for now;
this gives us correct data for IT8705/IT8712F again.
Inspired by the smsc(4) driver. The UPDATING file has been updated to
reflect the rename.
* dev/ic/ug.c (main code shared by the attachments)
* dev/isa/ug_isa.c (isa attachment)
* dev/acpi/ug_acpi.c (acpi attachment)
That means that ug(4) can now be attached via ACPI.
Thanks to Mihai Chelaru for the good work.
machines, the keyboard controller will not pass this test, but if you
attach anyway, it works fine. Note that this test is specifically
disabled in ic/pckbc.c, but given that it seems to work fine on other
machines, leave it defaulted to on.
attimer(4) is the new body of the part of pcppi(4) that mapped the TIMER1
register to set the pitch of the bell. It was necessary to separate them
in order to have a working ACPI attachment (as the two appear as different
devices in the ACPI structures).
Allow to enable the game port on an ES1888, in case the firmware didn't
this. (Otherwise we still rely on the firmware having mapped the sound
related registers.)
Limit this to the "isa" attachment for now because this is the only
one I'm able to test.
Attach the "joy" device directly at "ess" to make sure the port is
enabled before the "joy" probe/attach.
This makes the joystick port usable on a "PWS" alpha (Miata).
with ACPI and PNPBIOS attachments; move it to new atppc_isadma.[ch]
and g/c previous atppc_isa_subr.[ch]
move attppc_isa_softc struct definition to atppc_isa.c, and reorganize
the attachment somewhat for better readability; also g/c detach support code
* lpt device is defined in MI place (dev/ppbus/files.ppbus), dev/ic/lpt.c
is included there too; dev/ic/lpt.c is not included if ppbus is
configured or if there is alternative platform lpt (like for pc532)
* g/c MD lpt definitions and custom puc/upc attachments,
glue moved to conf/files and dev/pci/files.pci respectively; remove
device lpt definition from dev/isa/files.isa
* add ppbus parport attribute, atppc device attachments, adjust plip and lpt
glue
- Split if_fmv.c into MI/MD part and add ISA-PnP attachment for FMV-183.
(XXX FMV-184 is not tested. It would require extra media-select functions..)
- Fix probe functions of fmv_isa so that FMV-181A/182A will also match.
Fixes port-i386/9476.
using one word as both attribute and device doesn't work well,
radio.c is pulled in even with no such device in the configuration,
and the kernel doesn't link due to missing "radio_cd".
So call the attribute "radiodev" to avoid confusion.
not support a value (e.g., it's to be used as "options FOO" instead of
"options FOO=xxx"). options that take a value were converted to
defparam recently.
- minor whitespace & formatting cleanups
as config(8) will warn for value-less defparam options
- minor whitespace/formatting cleanup
- consolidate opt_tcp_recvspace.h and opt_tcp_sendspace.h into opt_tcp_space.h
remove all (legacy) "i4b_" prefixes outside of sys/netisdn.
Prefix all card specific driver support files with the basename
of the driver bus attachement file.
Renamed here:
i4b_isic_isa.c -> isic_isa.c
i4b_avm_a1.c -> isic_isa_avm_a1.c
i4b_daic_isa.c -> daic_isa.c
i4b_itk_ix1.c -> isic_isa_itk_ix1.c
i4b_tel_s08.c -> isic_isa_tel_s08.c
i4b_tel_s016.c -> isic_isa_tel_s016.c
i4b_tel_s0163.c -> isic_isa_tel_s0163.c
i4b_usr_sti.c -> isic_isa_usr_sti.c
This is the kernel part (userland to follow soon) of the latest (and
very probably last) release (version 0.96) of ISDN4BSD. ISDN4BSD has a
homepage at http://www.freebsd-support.de/i4b/.
It gives the user various ways to use the isdn connection: raw data (via
the i4brbch "raw b-channel" device), ppp (via the isp "isdn PPP" device),
voice/answering machine (the i4btel "telephone" device) and ip over isdn
(the ipr device, "IP over raw ISDN").
Supported are a bunch of common and older cards, more to be added soon
after some cleanup. Currently only the european E-DSS1 variant of the
ISDN D channel protocol is supported.
