scw
dcd1f30fb8
First cut of a driver for the Memory Controller ASICs found
...
on mvme16x and mvme17x boards.
2000-11-24 09:42:09 +00:00
matt
ca7a0ec817
Make this compile again.
2000-11-24 09:39:37 +00:00
scw
7d191ffe77
Revamp the bus_space(9) implementation:
...
. use a structure for the tag instead of an integer constant,
. add bus_space_{peek,poke}_N() (and G/C `badaddr()'),
. fix a few drivers which have dependencies on the implementation.
2000-11-24 09:36:40 +00:00
scw
a70c48655b
Add a bus_space_tag_t field to the mvmebus_softc structure and
...
initialise/use it in the ASIC-specific back-ends.
2000-11-24 09:27:42 +00:00
scw
06e91c089b
Replace the inline C versions of bus_space_{read,write}_N() with
...
inline assembler. This generates significantly more efficient code,
and trims ~1KB off the size of an mvme68k GENERIC kernel...
2000-11-24 09:05:55 +00:00
scw
7bd36d34a1
Use the MI md_root.c.
2000-11-24 08:54:08 +00:00
minoura
e6a960146a
Use MI md_root.c.
2000-11-24 06:55:22 +00:00
chs
fa19fe52db
adjust the spinlock macros in the non-MULTIPROCESSOR, non-LOCKDEBUG case
...
so that gcc will think that static spinlock are used.
this allows us to remove the ugly conditionalization of
static spinlock declarations.
2000-11-24 03:59:07 +00:00
simonb
f91f0ea65c
Make this compile again (unterminated `#if' conditional).
2000-11-24 02:21:56 +00:00
chs
bac6420b96
fix reversed keywords in previous commit.
2000-11-23 21:58:54 +00:00
chs
c01c2504a2
examine the PDE in addition to the PTE when checking for valid mappings.
2000-11-23 21:44:52 +00:00
nisimura
c2c8f26967
- Nuke xasc_ioasic.h and xasc_pmaz.h as no code uses the symbols they define.
...
- Hide #include <pmax/dev/device.h> for "pmax oldscsi" inside
#if NRZ > 0 || NTZ > 0.
2000-11-23 09:44:14 +00:00
matt
1420862fba
Add comments and AltiVec reg state.
2000-11-23 02:35:10 +00:00
msaitoh
007d059977
- fix \n conversion from \n\r to \r\n
...
- cleanup
2000-11-22 21:14:25 +00:00
msaitoh
d077acc4e9
const struct sysent
2000-11-22 21:12:28 +00:00
wiz
b03725b863
Change OF_nextprop to match prototype change to void *
...
(Please don't change prototypes without changing the corresponding
functions!)
2000-11-22 18:18:32 +00:00
jdolecek
818062390e
Intel recommends to print cpu serial number as six dash-separated nibbles
...
(XXXX-XXXX-XXXX-XXXX-XXXX-XXXX), make it so
2000-11-22 16:41:56 +00:00
nonaka
41b0daf516
- Add some PCMCIA devices.
...
- Commented out USB devices.
2000-11-22 16:15:44 +00:00
nonaka
ea05f33502
Set intrtype[irq] if interrupt type is IST_NONE.
2000-11-22 16:07:16 +00:00
tsubai
1931e71852
Constify struct sysent.
2000-11-22 14:00:46 +00:00
leo
f4420dcb03
Revert previous change. I cannot see why this ever worked... Pointed out
...
by Steve Woodford.
2000-11-22 12:39:03 +00:00
tsutsui
4b61041326
e_sysent in struct emul has been const'fied.
2000-11-22 11:47:17 +00:00
matt
03b44427da
Make assym.h be generated again
...
Add pcmcia support to files.prep
Add isa_intr_alloc support.
2000-11-22 08:55:35 +00:00
thorpej
534e7d4454
Several changes, which get us generally further along with
...
multiprocessor support:
- Implement MP-safe halt.
- Make the FPU saving code more like Bill's on the i386 MP branch.
XXX This code will no doubt be revisited again.
- Pass the cpu_info and trapframe to IPI handlers, saving some work
in the handlers themselves, and also making it possible for the
"pause" handler to reference register state for DDB.
- Add "machine cpu" to DDB, making it possible to reference other
CPUs registers (and thus get e.g. a traceback) from whichever
CPU is actually running the debugger.
- Garbage-collect "machine halt" and "machine reboot" DDB commands.
They don't have a prayer of working properly in multiprocessor
kernels, and didn't really work all that well in uniprocessor kernels.
2000-11-22 08:39:46 +00:00
thorpej
6cbdf24c45
Add a debugging printf, commented out by default.
2000-11-22 07:44:01 +00:00
enami
9c0026f5fa
s/char \*/const &/ so that this file compiles again.
2000-11-22 04:28:13 +00:00
itojun
1c06733c6b
constify
2000-11-22 03:54:01 +00:00
thorpej
7231516137
Just access the trapframe directly for DDB registers.
2000-11-22 02:25:52 +00:00
thorpej
7f6303947a
Restructure the way registers are presented to DDB, to make it
...
easier to support reading registers from other CPUs.
2000-11-22 02:03:48 +00:00
bjh21
564a044dcb
Using bsd.man.mk looked silly without a man page. Use bsd.prog.mk without
...
PROG instead.
2000-11-22 00:36:22 +00:00
bjh21
fc955e1104
Move BBBB out of the kernel tree so other architectures can see it.
2000-11-22 00:32:53 +00:00
bjh21
c4eb6c6325
Rudimentary manual page for BBBB.
2000-11-22 00:18:47 +00:00
bjh21
986c78ced4
New mechanism for building the tokenised version of BBBB under NetBSD. This
...
saves us having to keep a uuencoded version around.
2000-11-21 23:47:37 +00:00
bjh21
99899665e8
Move of BBBB to a more sensible location.
...
Look in sys/arch/arm26/boot/BBBB,fd1 for old commit messages.
2000-11-21 23:44:24 +00:00
tsutsui
161004f8c3
s/struct const sysent/const struct sysent/
...
(BTW, luna68k was missed in emul/execsw changes?)
2000-11-21 23:19:42 +00:00
scw
f86349723d
Put the call to mvme68k_init() back where it was originally.
2000-11-21 22:08:04 +00:00
jdolecek
09c6390523
make trap_type[] const
2000-11-21 21:27:04 +00:00
jdolecek
3323852a95
put compat-specific locore code to separate *_locore.s files
2000-11-21 21:13:23 +00:00
chs
0ac52aaf1d
remove MD functions for printing vnodes and buffers since there are
...
MI versions now.
2000-11-21 16:34:52 +00:00
ad
20ef6ae40a
Fix netbooting on the 2100/3100. Partially from Thilo Manske
...
<Thilo.Manske@HEH.Uni-Oldenburg.DE> in PR 11212.
2000-11-21 14:21:36 +00:00
ad
bd4ff2a804
PMIN vs. PMAX in boot message. Pointed out by Thilo Manske
...
<Thilo.Manske@HEH.Uni-Oldenburg.DE> in PR 11212.
2000-11-21 14:19:10 +00:00
tsutsui
2c7e91a09e
Define proper macros for FP frame offsets rather than magic numbers.
2000-11-21 13:54:13 +00:00
tsutsui
20494c8f05
Pull in dev/i2o/files.i2o, which is required by files.pci.
2000-11-21 13:34:57 +00:00
scw
f33cb83f53
Call zs_set_speed() to calculate the initial timing constants.
2000-11-21 11:41:37 +00:00
chs
c588bbbe76
add a missing newline in a printf().
2000-11-21 08:14:17 +00:00
chs
7af6378fca
two changes to arm32 fault handling:
...
- when pcb_onfault is set, allow UVM to attempt to resolve permission faults
as well as translation faults (rather than immediately invoking the
onfault handler for permission faults). this is needed for UBC since
it will be normal for uiomove() to fault on read-only mappings which
will be made writable by the pager.
- clear pcb_onfault before calling uvm_fault() and restore it afterward.
if the fault handler generates a pagefault, we'd like to panic rather
than invoking the onfault handler.
2000-11-21 06:30:05 +00:00
chs
197f7aae9c
two changes to pmap_enter():
...
- allow entry of the same mapping that's already there.
this can happen with UBC.
- if PMAP_CANFAIL, return failure rather than sleeping
when we fail to allocate a ptp.
2000-11-21 06:14:40 +00:00
chs
2116915a30
eliminate TRUNC_PAGE() and ROUND_PAGE() in favor of their
...
lowercase counterparts. also, a little misc cleanup.
2000-11-21 05:49:07 +00:00
soren
4927de268a
Adjust for p_emul change.
2000-11-21 02:26:07 +00:00
jdolecek
baae0324b9
restructure struct emul and execsw, in preparation to make emulations LKMable:
...
* move all exec-type specific information from struct emul to execsw[] and
provide single struct emul per emulation
* elf:
- kern/exec_elf32.c:probe_funcs[] is gone, execsw[] how has one entry
per emulation and contains pointer to respective probe function
- interp is allocated via MALLOC() rather than on stack
- elf_args structure is allocated via MALLOC() rather than malloc()
* ecoff: the per-emulation hooks moved from alpha and mips specific code
to OSF1 and Ultrix compat code as appropriate, execsw[] has one entry per
emulation supporting ecoff with appropriate probe function
* the makecmds/probe functions don't set emulation, pointer to emulation is
part of appropriate execsw[] entry
* constify couple of structures
2000-11-21 00:37:49 +00:00
soren
1bbc3bd9b5
Same as sys/dev/md_root.c.
2000-11-21 00:18:03 +00:00
soren
0bb338521a
Use dev/md_root.c.
2000-11-21 00:17:33 +00:00
soren
d1b07f4fee
Same as sys/dev/md_root.c.
2000-11-21 00:17:08 +00:00
soren
36ae7c2b02
Use dev/md_root.c.
2000-11-21 00:16:33 +00:00
soren
263f913967
Remove obsolete comment.
2000-11-21 00:15:20 +00:00
thorpej
f595d8e741
Ooops, do the last only if MULTIPROCESSOR.
2000-11-20 21:18:07 +00:00
thorpej
13c94ca56c
We've fixed enough bugs that we can actually acquire the scheduler
...
lock, jump into the idle loop, and run user code! Yippee!
2000-11-20 20:40:17 +00:00
thorpej
b37faa6ca5
Protect microtime_slock appropriately.
2000-11-20 20:37:52 +00:00
thorpej
e12f731db5
On the Alpha, interprocessor interrupts come in at the same priority
...
as normal device interrupts. Because of this, we won't get IPIs while
servicing such interrupts. This can lead to the following deadlock
scenario as reported by Bill Sommerfeld:
- Process runs on cpu1, but has FP state on cpu0.
- Process executes FP-using insn, causing an FP trap, which causes
the kernel lock to be acquired.
- At roughly the same time, cpu0 receives a device interrupt, and attempts
to acquire the kernel lock, which blocks since cpu1 already has it.
- cpu1 sends cpu0 a SYNCH FPU IPI, and waits for cpu0 to release its
FP state.
- Since cpu0 cannot notice the IPI until it has processed the device
interrupt, which it cannot do because it cannot acquire the kernel
lock, we have deadlock.
Solve the problem by adding a spinlock interlock release hook which
checks for pending IPIs and processes them.
Idea from Bill Sommerfeld.
2000-11-20 20:17:13 +00:00
jdolecek
0630488eda
fix typo
2000-11-20 20:07:36 +00:00
jdolecek
3b15e411a3
add moxa0 at isa entry, marked as experimental
...
This was not added also to other config files primarily because the
driver is not properly tested yet; this entry is primarily meant as an example
for those brave souls who want to try moxa.
2000-11-20 19:53:43 +00:00
scw
b6f0a678dd
Add support for the m68060-based machines: MVME-172 and MVME-177.
...
CPU support taken from a combination of NetBSD/amiga and NetBSD/x68k.
At this time, MVME-172 works but MVME-177 is untested. Since the '177
is otherwise identical to the MVME-167, this should *just work*.
2000-11-20 19:35:28 +00:00
thorpej
fdfb847e3e
Make ci_ipis volatile.
2000-11-20 19:25:43 +00:00
thorpej
7f059c8e69
Move IPI processing into a separate function.
2000-11-20 19:24:36 +00:00
thorpej
5a22e57dc3
Print the CPU ID while dumping trap info.
2000-11-20 15:33:39 +00:00
tsubai
11b48d8a4d
Thermal Management Interrupt is available on 750, too.
2000-11-20 15:16:04 +00:00
tsutsui
2cd77d5700
Fix swapped keycode for '[' and ']'.
2000-11-20 14:55:15 +00:00
chs
c62d17a551
rationalize the use of b_flags for geteblk() buffers.
...
rather than assigning to the whole field, set or clear individual flags,
which implies that the B_BUSY and B_INVAL flags will remain set.
this allows us to make the assertion in brelse() that B_BUSY is set,
which is the purpose of all this.
2000-11-20 08:24:08 +00:00
thorpej
2f1e131332
Delete a block of code that was intended to get the second
...
CPU to handle interrupts, but prevents a whole slew of things
from working properly on the second CPU. It is no longer
necessary now that several other bugs have been fixed.
2000-11-20 03:15:15 +00:00
thorpej
fe5b367ce6
In Idle(), only switch to the idle PCB if we're not already running
...
on it, and make sure to deactivate the old process's address space,
as this will not otherwise be done by cpu_switch() later once we're
on the idle PCB.
Also, update some comments related to when s0 (i.e. the old process)
is NULL in the context switching code.
2000-11-20 02:44:45 +00:00
soren
046ce58634
Enable com at cardbus.
2000-11-20 02:00:46 +00:00
jdolecek
2faa9db8c1
cosmetic change in brand string handling (NULL vs. "")
...
drop Xeon from PIII Cascades entry, it should be handled by the brand id
support (pointed out by Scott Telford in private e-mail).
2000-11-19 23:38:22 +00:00
matt
95a8447ccf
Add G4 specific exceptions (include AltiVec).
2000-11-19 20:48:20 +00:00
matt
bb71a6b332
Add AltiVec VSCR definitions.
2000-11-19 20:41:04 +00:00
sommerfeld
2a0dca4bec
Correct conditionalization of last change.
2000-11-19 20:11:12 +00:00
sommerfeld
8074b0b0b2
MULTIPROCESSOR: context switch to cpu's idle pcb before unlocking the
...
scheduler in idle so our stack doesn't get stolen out from underneath us.
2000-11-19 20:08:36 +00:00
sommerfeld
c0c9c552c0
Fix obvious typo (don't mark current cpu as not running when doing a
...
broadcast IPI).
2000-11-19 20:05:25 +00:00
matt
b1e1cfdb4a
Add AltiVec VEC bit.
2000-11-19 19:52:37 +00:00
thorpej
87819535b2
Synch cpu_hatch() with the i386:
...
- print the same style message when the CPU is running.
- Initialize ci->ci_schedstate.spc_runtime on the CPU.
2000-11-19 19:18:19 +00:00
thorpej
69a3a857be
As a temporary measure, protect microtime() with a simple lock.
...
XXX Needs to be rewritten from scratch.
2000-11-19 19:16:44 +00:00
mrg
5d04f7b69d
update to reality. sync with GENERIC32.
2000-11-19 15:23:55 +00:00
mrg
1368967d8c
fix some comments.
2000-11-19 15:22:51 +00:00
tsutsui
ae33b9bc92
More cosmetics.
...
BTW, why these two "generic" config files exist?
2000-11-19 14:23:34 +00:00
tsutsui
d805c3822e
Remove "rnd is EXPERIMENTAL" comment.
2000-11-19 14:14:31 +00:00
tsutsui
523ec808a6
- Add bba* at ioasic?
...
- Some cosmetics
2000-11-19 14:10:56 +00:00
tsutsui
13c5a51b02
Add some newer stuff from GENERIC and enable rnd.
2000-11-19 14:03:39 +00:00
tsutsui
f6c12f31f0
Sync with GENERIC.
2000-11-19 13:46:29 +00:00
thorpej
b9ad1f75b9
Make VM_MAX_KERNEL_ADDRESS end on a page boundary.
2000-11-19 03:16:55 +00:00
thorpej
561db1fb7e
Implement pmap_growkernel().
2000-11-19 03:16:34 +00:00
mrg
e97f9e9f7a
use OpenFirmware, not prom version 0, operations. eeprom(8) works now.
2000-11-18 23:45:05 +00:00
mrg
a2ea64e265
sync with sparc port. add support for OF_setprop(), OF_nextprop(),
...
OF_interpret() and OF_milliseconds().
2000-11-18 23:43:06 +00:00
scw
a29dff3290
Fix a braino in the last commit.
2000-11-18 22:46:07 +00:00
scw
4b0eb0e2dd
Allow a degree of tolerance when calculating the baudrate timing constant.
2000-11-18 22:34:25 +00:00
tsutsui
ed94d05b50
Clear %fp to terminate backtrace on gdb.
2000-11-18 20:46:28 +00:00
soren
60239485e8
Some CRIME definitions.
2000-11-18 19:33:49 +00:00
soren
4227c8ce3a
Use ETHER_ADDR_LEN.
2000-11-18 19:32:34 +00:00
thorpej
137c030d5b
Count individual interprocessor interrupts -- it's good to know where
...
they all come from.
2000-11-18 19:25:35 +00:00
thorpej
34f24f4819
Make sure that the cpu_info points at the correct softc on
...
single-processor kernels running on multi-processor systems.
2000-11-18 17:45:31 +00:00
sommerfeld
859adc84de
Loading the cpu_info value into the kgp for the new cpu isn't likely to work
...
very well.
2000-11-18 16:21:37 +00:00
lukem
9f10280ff3
OF_nextprop(): change 'char *nextprop' -> 'void *nextprop', in line with
...
pk's change to sys/dev/ofw/openfirm.h rev 1.15.
2000-11-18 12:15:50 +00:00
thorpej
73265fa0c9
Duh, don't need SGMAP-related includes on this chipset.
2000-11-18 05:56:20 +00:00
mrg
d6d4159b1a
s/register//
2000-11-18 03:52:50 +00:00
mrg
40095eb6a1
struct pcb's lastcall is const char *
2000-11-18 03:51:14 +00:00
mrg
0485f611f1
remove dead debugging code.
2000-11-18 03:49:38 +00:00
lukem
a687c7deac
pull up stuff changed in GENERIC from 1.370 - 1.377, appropriately
...
commented out if it's not relevant to a laptop
2000-11-18 02:08:30 +00:00
mrg
215d0d2dcd
pull over from sparc port's mem.c:
...
>revision 1.26
>date: 2000/11/13 15:31:44; author: pk; state: Exp; lines: +10 -1
>Detect "EOF" conditions on the memory-special files.
2000-11-17 23:18:53 +00:00
thorpej
72a145bd5e
I have long since upgraded the boot block on my test system. (Actually,
...
I have an entirely different test system now.)
2000-11-17 22:47:30 +00:00
matt
b605c997e2
Commit changes to SCSI working on the VS4000/9x. "Don't overthink the
...
plumbing! Duh!".
2000-11-16 19:25:40 +00:00
scw
d00258d484
bus_dmamem_map() expect a cpu-relative physical address...
2000-11-16 19:12:20 +00:00
thorpej
40460ae8eb
Need to provide CACHELINESIZE in _STANDALONE environments, too.
2000-11-16 19:02:33 +00:00
jdolecek
97669de104
make i386_nocpuid_cpus[] and i386_cpuid_cpus[] const - this pushes
...
another ~1.4KB to text section
2000-11-16 17:00:17 +00:00
jdolecek
def6d1b4ac
Newer Intel PIII processors also make available Brand ID value through
...
cpuid instruction, which is used to differentiate between Celeron, common PIII
and PIII Xeon; recognize it and print appropriate info if applicable
Information taken from Intel's (R)
Intel Processor Identification and the CPUID Instruction, AP-485
2000-11-16 10:19:02 +00:00
jdolecek
a9ad986a90
Update cpuid table according to information sent by Scott Telford
...
in port-i386/11502, with only sligh change for Coppermine entry -
cpus with family 6, model 8 are not all Celerons, they can be
either common PIII, Xeon or Celeron
2000-11-16 09:06:17 +00:00
matt
9dd26cf7c4
It's hfs.c, not hfs. Add -I${.CURDIR} for objdirs. XXX hfs.c should
...
be integrated into libsa.
2000-11-16 07:36:04 +00:00
scottr
4db27b3da4
Enhance readability through consistent function parameter names and KNF.
...
There are no functional changes.
2000-11-16 07:04:12 +00:00
thorpej
d96bb89daf
Use <powerpc/powerpc/trap_subr.S>
2000-11-16 05:34:03 +00:00
thorpej
216902b8d2
Trap routines from the macppc port, to be used by other PowerPC
...
ports (only amigappc's differs).
2000-11-16 05:33:04 +00:00
thorpej
eb04d01500
Add an lcsplx() ("splx for locore") like the other PowerPC ports
...
have. This will allow us to share locore code with them.
2000-11-16 01:56:05 +00:00
scw
598ce19336
Doh! Revert all but the baudrate clock changes from that last commit;
...
a bunch of local stuff crept in.
2000-11-15 21:32:03 +00:00
jdolecek
ea9f7ed6d5
introduce SIGACTION_PS() macro - this is similar to SIGACTION(), but works
...
for (struct sigacts *) instead of (struct proc *)
2000-11-15 21:13:58 +00:00
thorpej
e6fa7f2fc8
Move the ISA DMA cookie into isadma_machdep.c.
2000-11-15 19:31:35 +00:00
thorpej
9298fd52fc
Garbage-collect some more stuff.
2000-11-15 19:30:10 +00:00
pk
521b17daa6
Adjust OF_setprop() prototype.
2000-11-15 16:15:01 +00:00
pk
4a80a32735
Adjust setprop() prototype to match the one in dev/ofw/openfirm.h
2000-11-15 16:14:13 +00:00
pk
439b4b325a
OF_getproplen(), OF_nextprop() and OF_setprop() prototypes are now in
...
dev/ofw/openfirm.h
2000-11-15 16:13:10 +00:00
pk
11eb59d511
Adjust setprop() prototype to match that in dev/ofw/openfirm.h
2000-11-15 16:12:01 +00:00
tsubai
ced4cea08e
Fix an uninitialized variable reference.
2000-11-15 15:01:14 +00:00
tsubai
654fcfa344
Remove an unused variable.
2000-11-15 14:43:44 +00:00
tsubai
0d339b0df5
Screen console works now.
2000-11-15 14:29:40 +00:00
tsubai
9b85cc40d4
Keyboard and mouse support for news5000.
2000-11-15 14:04:05 +00:00
scottr
96cb29b773
As was the original intent a long, long time ago -- but in this galaxy, and
...
in fact on this planet -- generate a SIGILL for user-mode A-line traps.
The core of this change is taken verbatim from PR 10511, submitted by
Christian Bauer.
2000-11-15 07:15:36 +00:00
scottr
1609858811
The Cuda-based ADB hardware has the ability to queue some commands and
...
return control to the main CPU before completing the ADB transaction.
Double the adb_op_sync() timeout as a result. Fixes PR 11310.
2000-11-15 06:35:51 +00:00
enami
038ca0a146
Make isa_machdep.c compile again.
2000-11-15 02:00:31 +00:00
enami
1ef516e9be
Pull in uvm_extern for PAGE_SIZE.
2000-11-15 01:59:35 +00:00
thorpej
b84f740be0
Move bpfattach()/bpfdetach() calls into ether_ifattach()/ether_ifdetach().
2000-11-15 01:02:11 +00:00
matt
960800cbb8
Convert some spaces to tabs.
2000-11-15 00:49:31 +00:00
matt
e720f8addf
Add MFS and vnd.
2000-11-15 00:46:35 +00:00
matt
dbe8de94a8
back out my change powerpc/conf/files.ofw. Enable the inclusion of
...
dev/ofw/files.ofw on macppc. Add openfirm to ofppc/conf.c
2000-11-15 00:39:31 +00:00
matt
39dc5fc58b
Add openfirm pseudo-device.
2000-11-14 23:42:35 +00:00
thorpej
990d23039d
NBPG -> PAGE_SIZE.
2000-11-14 22:55:51 +00:00
thorpej
ec0069dd37
NBPG -> PAGE_SIZE
2000-11-14 22:55:05 +00:00
matt
8ba706bdfd
Add rnd & openfirm to POWERMAC
...
Add openfirm and commmented-out firewire stuff to GENERIC
2000-11-14 22:33:24 +00:00
matt
ca735c9a04
Add initial support dual-CPU G4. At least finds 2nd CPU.
2000-11-14 21:55:25 +00:00
matt
6e88c0d0d6
Add a openfirm entry to conf.c
2000-11-14 21:46:09 +00:00
matt
58645ba248
Add support for /dev/openfirm.
...
Add OF_nextprop support.
2000-11-14 21:22:43 +00:00
pooka
56d104de33
add I2O to make config work again
2000-11-14 20:28:22 +00:00
augustss
eb9736c09a
Add uscanner.
2000-11-14 19:52:04 +00:00
thorpej
fb50850754
We use 4K VM pages on the VAX. Make PAGE_SIZE and friends into
...
compile-time constants.
2000-11-14 19:49:57 +00:00
thorpej
eff2f3d04f
We use 4K pages on the x86k. Make PAGE_SIZE and friends into
...
compile-time constants.
2000-11-14 19:47:25 +00:00
thorpej
c9ff0b7af1
Sun3 and Sun3x both use 8K pages. Make PAGE_* and friends into
...
compile-time constants.
2000-11-14 19:34:26 +00:00
thorpej
fc082857f5
'532 has 4K pages. Make PAGE_SIZE and friends into compile-time
...
constants.
2000-11-14 19:31:51 +00:00
thorpej
3d2726d992
We use 4K pages on the NeXT. Define PAGE_SIZE and friends to be
...
compile-time constants.
2000-11-14 19:29:00 +00:00
thorpej
091d40d586
We use 4K pages on the news68k. Make PAGE_SIZE and friends into
...
compile-time constants.
2000-11-14 19:23:07 +00:00
thorpej
ecf0470012
We use 4K pages on the mvme68k. Override PAGE_SIZE and friends to
...
be compile-time constants.
2000-11-14 19:12:58 +00:00
thorpej
9f60ecd809
We use 4K pages on the mac68k. Make PAGE_SIZE and friends into
...
compile-time constants.
2000-11-14 19:07:34 +00:00
thorpej
186d9e105e
We use 4K pages on the hp300. Make PAGE_SIZE and friends
...
compile-time constants.
2000-11-14 19:03:22 +00:00
thorpej
e6da7eebba
We use 8K pages on the Atari. Make PAGE_SIZE and friends into
...
compile-time constants.
2000-11-14 19:01:09 +00:00
thorpej
f74dfc7755
We use 8K pages on the Amiga. Make PAGE_SIZE and friends into
...
compile-time constants.
2000-11-14 18:58:29 +00:00
thorpej
cb38ab39ab
We use 4K pages on MIPS systems (see mips_param.h), so override
...
PAGE_SIZE and friends to be compile-time constants.
2000-11-14 18:55:16 +00:00
thorpej
10b31e1ebc
The i386 page size is fixed -- override PAGE_SIZE, et al, so that they
...
are compile-time constants.
2000-11-14 18:01:54 +00:00
tsubai
f744e6327a
Correct VRAM size.
2000-11-14 15:32:03 +00:00
kleink
a5a6bbd1a8
Defopt BLINK.
2000-11-14 11:34:51 +00:00
tsubai
e3ae93dfd4
Add hfs support. Currently this layer simply throw the request to the OF
...
(and the OF recognizes HFS).
2000-11-14 11:25:34 +00:00
matt
edc0af8cd3
Add OF_nextprop and required conf-glue for /dev/openfirm.
2000-11-14 07:13:02 +00:00
thorpej
45804ccf0e
A respectable GENERIC, loosely based on the macppc GENERIC.
2000-11-14 06:01:09 +00:00
tsubai
03fa172a01
No longer used.
2000-11-13 19:05:58 +00:00
abs
d72a269feb
If we only ever have a strongarm CPU, use
...
makeoptions COPTS="-O2 -march=armv4 -mtune=strongarm"
some files previously had
makeoptions COPTS="-O2 -march=strongarm -mtune=strongarm"
some had no option at all
2000-11-13 18:40:34 +00:00
tsubai
a564a7a2a9
Switch to wscons.
2000-11-13 16:48:41 +00:00
jdolecek
ec93c3dd25
when evaluating CPU speed, make the wait 0.1s instead of 1s - the accuracy
...
difference is like 0.008% on my system and the delay is now almost unnoticable:)
Discussed with Jason Thorpe, Frank van den Linden.
2000-11-13 16:40:40 +00:00
pk
db6832a4b6
Detect "EOF" conditions on the memory-special files.
2000-11-13 15:31:44 +00:00
minoura
21e684b743
New line discipline.
2000-11-13 15:20:28 +00:00
minoura
fd524293aa
Look at opt_m680x0.h to determine whether to use -m68060 compiler option,
...
since options M68060 (etc.) is now defopt'ed.
Pointed out by NISHIMURA Takeshi <nsmrtks@comd.nara.sharp.co.jp>.
Use -m68020-60 instead of -m68060 to ensure not to use new instructions.
2000-11-13 14:47:14 +00:00
pk
84ee07379b
Remove left-over turds from previous __P() cleanup.
2000-11-12 21:07:21 +00:00
mycroft
63270df506
Sync with GENERIC.
2000-11-12 06:52:37 +00:00
pk
258784289c
This file is no longer needed; it's superseded by the MI mk48xx driver.
2000-11-11 12:34:22 +00:00
pk
d80d0a8b06
Print host ID in hex.
2000-11-11 12:24:07 +00:00
pk
f88b137bd5
De-__P() this file.
2000-11-11 12:19:20 +00:00
pk
53c656364f
Switch to MI mk48xx and intersil7170 time-of-day clock drivers.
2000-11-11 12:14:03 +00:00
pk
109cb0fd5e
Rename storage for the sun4 idprom structure to `sun4_idprom_store'.
2000-11-11 12:12:46 +00:00
scw
d7b439dff5
udp.c is now needed in SRC_sa.
2000-11-11 11:36:17 +00:00
pk
0d4a68ac9b
Pull in the mk48txx and intersil7170 drivers.
2000-11-11 11:19:52 +00:00
sato
47ee1d1c1f
update vrc4172 pwm unit codes.(but not yet completly)
2000-11-11 10:08:12 +00:00
tsutsui
96deb0588d
Reduce NKMEMPAGES_MIN_DEFAULT.
2000-11-11 09:05:09 +00:00
sato
c8c49f7222
- vrc4172 address map definisions.
...
- vrc4172 gpio/ucy/pcs/pmu/pwm register definitions.
- vrc4172 pwm driver (not yet completely)
2000-11-11 04:42:08 +00:00
eeh
efaf3dbb74
Remove unnecessary header file that causes linker issues.
2000-11-10 17:47:55 +00:00
hannken
0ba0592864
Pull in dev/i2o/files.i2o.
2000-11-10 17:09:15 +00:00
eeh
132d16957c
Clean up config and fix things so kbd.h is generated even w/no keyboard.
2000-11-10 16:05:40 +00:00
mrg
3ea4c67b6b
remove unused variable
2000-11-10 11:57:26 +00:00
itojun
05b2e0b151
/t_line/t_linesw (typo)
2000-11-10 11:08:32 +00:00
enami
ce78591ae1
Cometic change; keep the code to process a second hunk closer to the first one.
2000-11-10 04:00:25 +00:00
enami
390c8adfbc
Don't start next iteration while processing a first memory hunk since
...
there may be a second hunk.
2000-11-10 03:58:15 +00:00
scw
096c3068dd
The ZS chips are actually clocked at 5MHz and 10MHz on mvme147 and
...
mvme162 respectively. Thanks to Neil Lubdan and a frequency counter. :-)
2000-11-09 19:51:57 +00:00
christos
0cf0dd1b80
put the suggestion message in uvm_page.c. There could be other reasons
...
why we are not able to find the end of memory.
2000-11-09 19:22:30 +00:00
kim
534a2fa4bb
BIOS memory loading messages can be enabled with DEBUG_MEMLOAD.
...
Increase VM_PHYSSEG_MAX from 3 to 5 to avoid a panic. Suggest
increasing VM_PHYSSEG_MAX in the panic message.
2000-11-09 17:34:51 +00:00
tsutsui
dd7146d50b
On sun3x, cpu_reboot() calls sunmon_abort() for PROM bug work-around,
...
but sunmon_abort() does not restore mon_crp so it causes problems.
Instead, call romVectorPtr->abortEntry (via trap14) from sunmon_halt()
and call it from cpu_reboot().
Now PROM boot command works properly even after halt on my 3/80.
2000-11-09 14:38:44 +00:00
tsutsui
487ec97958
Make it possible to enable/disable DC_BE and IC_BE bits in %cacr at runtime
...
and enable them on news1200/1400/1500 (which have no L2cache).
2000-11-09 14:17:19 +00:00
tsutsui
42c617c5c6
Oops, fix botch in previous.
2000-11-09 13:32:06 +00:00
tsubai
eef7148644
Enable HID0_BTIC on 750 and 7400.
2000-11-09 11:58:09 +00:00
tsubai
b11322a19d
powerpc HID registers definitions (only HID0 for now).
2000-11-09 11:49:13 +00:00
thorpej
aadf694c47
Fix a printf format.
2000-11-09 06:09:59 +00:00