joda
19ff47781e
copy xircom entries from pcidevs
1999-11-08 19:57:13 +00:00
sommerfeld
1cfdb728d0
avoid touching freed mbuf after allocation failure.
1999-11-08 15:56:16 +00:00
sommerfeld
66ab262b1c
add a bunch of debug printfs under IFF_DEBUG and IFF_LINK2;
...
turn on IFF_DEBUG to trace the management protocol goo.
turn on IFF_LINK2 as well to see beacons.
1999-11-08 15:45:00 +00:00
sommerfeld
94bb856781
misc cleanups; seems to work a little better in a dense-AP environment now.
...
1) ignore probe requests rather than printing "unknown mgmt subtype"
(cosmetic)
2) don't panic if mget of the 2nd mbuf in a chain fails (patch from MCR)
(though that whole function badly needs to be rewritten)
3) be a little more tenacious about hanging on to an access point.
1999-11-08 13:24:00 +00:00
augustss
9cec807b1c
Return -1 from wsmux_displayioctl() if no muxes components like the ioctl().
1999-11-08 10:10:25 +00:00
mycroft
0c1542d9a4
Apply wrstuden's stopgap change to make alpha/macppc X work without wsmux.
1999-11-08 04:48:18 +00:00
enami
8567277ae0
Print range of all iospaces or all memspaces if their length aren't zero.
1999-11-07 07:44:21 +00:00
cgd
b4560adaf2
regen
1999-11-07 07:03:08 +00:00
cgd
7867af6cfb
back out rev 1.166:
...
(1) the list added isnt' complete and i'd call it incorrect. (There are
other devices with these names, where were omitted. I've never seen
the devices with these IDs, I _have_ seen the other devices that go
by these names.)
(2) the PR (8754) had not been updated to note that the problem was
fixed, and i'd preiously asked the submitter for more information and/or
a corrected list.
1999-11-07 06:59:46 +00:00
sommerfeld
8be740541b
Extract MAC address from CIS data in pcmcia front end.
...
Fix multicast address manipulation.
ipv6 now works through this driver.
1999-11-06 16:43:53 +00:00
rh
b2a56ee1b9
regen.
1999-11-06 13:50:02 +00:00
rh
080ff79d14
Add vendor/product entry for Auravision VxP524 PCI Video Processor.
1999-11-06 13:48:29 +00:00
augustss
34e97b4c65
Regen.
1999-11-06 11:18:00 +00:00
augustss
3514a2e115
Add SIIG devices. Closes PR kern/8754 from Andreas Wrede <andreas@planix.com>
1999-11-06 11:17:30 +00:00
soren
6f961bbe31
It's okay for a memory region to be larger than it's alignment.
1999-11-06 06:20:53 +00:00
enami
6b2ae05f21
Possible typo.
1999-11-06 01:01:20 +00:00
enami
9be459a1fb
Regen.
1999-11-06 00:59:56 +00:00
enami
9c7bc44f91
Support an earlier version of IO-DATA PCLA/T.
1999-11-06 00:58:32 +00:00
pk
23c39b410d
Fix some diagnostic output with a patch from Jonathan O'Brien.
1999-11-05 19:00:44 +00:00
ad
341c38ac01
In rasops_do_cursor(), don't pull the mask from ri_devcmap[], just use ~0.
...
Needed to make cursor DTRT on NetBSD/hpcmips - from takemura.
1999-11-05 10:16:11 +00:00
sommerfeld
73bf131124
Add rcsid's
1999-11-05 05:13:36 +00:00
nisimura
392a4acdd7
- Remove temporary hack to recognize PMAGD since SFB+ rendering function
...
is found not fully upward compatible to its predecessor. sfbp.c is now
under development.
- Reduce copycols() malfunction, but has still lot of troubles.
1999-11-05 03:28:40 +00:00
bouyer
fb8b192c0a
Pass xfer->c_bcount instead of sc_xfer->datalen to the device, so that
...
it gets the rigth len for a request sense (from OpenBSD).
1999-11-04 21:16:53 +00:00
thorpej
0ad32f07d2
Revert this part of rev 1.59:
...
- Be more conservative when resetting the interface after a transmit error.
It caused the interface to totally wedge on the (somewhat common) transmit
FIFO underrun condition.
1999-11-04 20:27:11 +00:00
thorpej
4a09180976
Don't pass rd/mult capability though a PCI-PCI bridge. The bridge would
...
have to break it up into mutliple rd/line's anyhow, so why bother letting
the device issue it in the first place.
1999-11-04 19:04:04 +00:00
thorpej
110ac27449
Make sure devices are told they can use rd/line, rd/mult, and wr/inval.
1999-11-04 19:03:00 +00:00
sommerfeld
d9bc6e4f98
Conditionalize so this builds on 1.4.x..
1999-11-04 18:43:42 +00:00
sommerfeld
12b00b0444
Allow this to build on 1.4.x, too
1999-11-04 18:41:14 +00:00
sommerfeld
fd0062aeab
Attempt to be smart about whether to use I/O space or memory space to
...
access the card's shared memory: if we can't allocate the 32k we need,
fall back and just use I/O space access.
1999-11-04 17:48:13 +00:00
sommerfeld
2ee5984fa6
Driver front-end for BayStack 650 PCMCIA 802.11 card.
...
Committed using the driver.
1999-11-04 17:12:43 +00:00
sommerfeld
58e709f695
Minimally functional driver for the am79c930 802.11 controller chip).
...
Working well enough to support dhcp; i'm doing this commit using the
interface.
Supports FH only. Does not yet do ad-hoc mode; works in
infrastructure mode. Not yet tested in environments with multiple
access points.
1999-11-04 17:10:53 +00:00
tsarna
c0b20561f7
regen
1999-11-04 16:18:41 +00:00
tsarna
9df6f09e30
Add Aureal AU8820
1999-11-04 16:02:20 +00:00
augustss
fb580e3f6e
Regen.
1999-11-04 10:34:40 +00:00
augustss
1289659618
Add SBLive!
1999-11-04 10:34:03 +00:00
joda
c8532c3ebe
regen
1999-11-04 09:39:17 +00:00
joda
dbfcb792e1
add Xircom X3201-3 Fast Ethernet Controller
1999-11-04 09:38:38 +00:00
jonathan
0588cdfc88
Update user-level PPS-API to match -05 draft.
...
Change PPS_<xxx> ioctls to PPS_IOC_<xxx>.
1999-11-04 05:33:58 +00:00
mrg
bd0928e723
find "SUNW,hme" as well as "hme". this matches the onboard
...
ultra2 hme. haven't actually tested this beyond it probing
because my scsibus is hanging. anyway, it reports:
hme0 at sbus0 slot 14 offset 0x8c00000 vector 21 ipl 6: address 08:00:20:8f:7f:8f
1999-11-04 05:31:38 +00:00
thorpej
97bbad1f0b
Do rd/line and rd/mult on the MX98725 and LC82C115, too.
1999-11-04 01:27:32 +00:00
thorpej
e3f20e8ff1
Use Memory Read Line and Memory Read Multiple on the 21140, 21140A,
...
21142, and 21143, if the PCI bus says its okay.
1999-11-04 01:20:55 +00:00
thorpej
a4e1bde0b3
Print out if the read {line,multiple} and write/invalidate commands are
...
okay to use.
1999-11-04 01:03:34 +00:00
thorpej
ca9b9a3b2e
Adapt to mii_phy_probe() change.
1999-11-04 00:24:00 +00:00
thorpej
bedeeb9896
Allow mii_phy_probe() to be called multiple times, and allow the caller
...
to specify either the PHY number or the PHY `offset' (1st, 2nd, 3rd, etc.)
to configure.
1999-11-04 00:22:07 +00:00
thorpej
3750d3f592
Update for ifmedia changes.
1999-11-03 23:07:10 +00:00
augustss
1e460723a5
Don't flag an error when doing ioctl() on a mux without any
...
multiplexees. Should fix PR 8723.
1999-11-03 22:48:38 +00:00
thorpej
bc82bff1dc
Don't add any loopback versions of media, for now.
1999-11-03 22:32:45 +00:00
thorpej
8fc600c3b1
Clean up the code that adds media a little, and make media selection
...
table-driven in preparation for some other changes to be made.
1999-11-03 22:30:32 +00:00
thorpej
e017601bd3
More or less completely rewrite the way DECchip media is handled, and
...
add support for the DECchip 21142/21143 SIA/SYM media. Make the Macronix
98713 behave like a 21140A, and the 98713A and later behave like a 21143.
Nuke all of the Macronix-specific Nway code, as it will be identical to
the 21143 Nway code once it is written.
1999-11-03 22:25:08 +00:00
thorpej
eb16cd3aa7
Define DECchip 21142/21143 register bits, and since the Macronix chips
...
are nearly perfect 21143 clones, delete a bunch of redundant info in that
section of the file.
1999-11-03 22:22:49 +00:00
ragge
94b8f863fa
Don't use structs for BI space definitions, use offsets.
1999-11-03 21:57:40 +00:00
matt
31ba134e32
use __vax__ and __i386__ instead of vax and i386
1999-11-03 20:50:17 +00:00
chs
f13d3f5b3b
from jason:
...
avoid biodone()ing the original buf twice when a component buf
gets an error. fixes PR 8704.
1999-11-03 16:04:03 +00:00
mycroft
d2b362b685
Only update the cursor state if it's enabled.
1999-11-03 15:55:27 +00:00
mycroft
4f1f2c6398
Fix silly error that caused the secondary channel to be ignored if the primary
...
channel was disabled.
1999-11-03 14:54:07 +00:00
augustss
3b576cc6b2
Update.
1999-11-03 12:11:26 +00:00
augustss
3fc5780b19
Allow irq 15 since some clones use it.
1999-11-02 23:35:02 +00:00
augustss
361b083d4c
Shorten some delay()s. From WITEK Wnuk <witek@atari.org>
1999-11-02 17:48:01 +00:00
augustss
35483ee3bf
Set mixer controls after a reset.
1999-11-02 17:05:05 +00:00
augustss
b952f8727b
Print a little more information when attaching.
1999-11-02 16:54:27 +00:00
kleink
b536890c88
Add a mixer control for the Master Volume Mute knob.
1999-11-02 12:11:42 +00:00
augustss
72a864f78c
Add the midibus attribute to the fms driver.
1999-11-02 11:58:06 +00:00
takemura
8f94bda30c
Add new font sets - VT220 8x8 and 8x10.
...
I brought them from arch/i386/isa/pcvt/Util/fonts.
You can specify FONT_VT220L8x8 or FONT_VT220L8x10 in a configuration file.
1999-11-02 10:25:22 +00:00
soren
bc18b45323
Clean up attachment printing a bit.
1999-11-02 05:41:27 +00:00
soren
09c41837ce
Fix crash when both 1370 and 1371/1373 devices are configured.
...
Update documentation links.
XXX The initial volume of the 1371 mixers is set to 255. Should be ~200.
1999-11-02 05:40:59 +00:00
thorpej
c8852145bc
Get fms MPU and OPL module inclusion right.
1999-11-02 00:29:20 +00:00
augustss
3c40153ea9
Fold some long lines and make it compile with the new auconv functions.
1999-11-01 23:26:58 +00:00
augustss
7c8206c662
Add a missing file for the fms driver.
1999-11-01 21:54:12 +00:00
augustss
8cd393778b
Regen.
1999-11-01 20:43:51 +00:00
augustss
684aa0605c
Add FM801 audio device driver. From Witold J. Wnuk ww181302@zodiac.mimuw.edu.pl
...
Closes PR kern/8729.
1999-11-01 20:43:12 +00:00
augustss
860ebb7a92
Make little endian and big endian version of all functions
...
that deal with 16 bit samples. Let the drivers decide which ones
to use.
1999-11-01 18:12:19 +00:00
augustss
fb4a4525a8
Be cautious about the blocksize returned by the hardware driver to
...
avoid division by 0.
1999-11-01 18:06:36 +00:00
haya
88f1d44cc2
Change the interface of cardbus_function_enable() and
...
cardbus_function_disable().
1999-11-01 09:59:23 +00:00
haya
8553661a5e
Maintainance the name of Ricoh PCI-CardBus bridges.
1999-11-01 08:58:45 +00:00
joda
d094848950
uncomment fxp_cardbus
1999-10-31 15:14:17 +00:00
joda
b0e5ebfddc
commit a more working version if this driver; so far only tested on an
...
Intel `PRO/100 LAN+Modem56 CardBus II'
1999-10-31 15:12:39 +00:00
mycroft
8efdaab402
Fix the size of start_sector, end_sector and end_sector_l0. (I'm just going to
...
assume the Linux people will also fix this, since I reported it to them.)
1999-10-31 14:03:16 +00:00
augustss
6346873ea6
Use the right attribute for attaching USB controllers.
...
From MAEKAWA Masahide <bishop@rr.iij4u.or.jp>
1999-10-30 17:03:30 +00:00
bouyer
98b5a519ce
In sddump(), check sd->sc_dev.dv_flags once sd has been initialised.
...
Patch supplied by tsutsui@ceres.dti.ne.jp in kern/8708.
1999-10-30 16:35:12 +00:00
sommerfeld
db05febdfa
Add enable/disable support and EEPROM size selection, prerequisites
...
for getting the cardbus fxp attachment to work.
Tested on the built-in 82559 in a VAIO Z505S.
From Johan Danielsson / PR8631; changed slightly to KNF.
1999-10-30 16:07:58 +00:00
augustss
3d0e8ae9dd
Make this file compile again by using the same names as in pcidevs.
1999-10-30 16:02:28 +00:00
augustss
a498fbea5f
Add midibus attribute for eap.
1999-10-30 14:11:16 +00:00
enami
b9451ead47
remmove unncecessary empty line.
1999-10-30 12:07:08 +00:00
enami
fc21ddd943
Call epstop at the beginning of epinit, especially to make sure that
...
ep_tick is untimeouted before new one is scheduled. This makes 3C574-TX
works at least in 10Mb/s mode.
1999-10-30 01:35:47 +00:00
enami
3f199cc5e4
Add and delete a reference to an adapter at aicattach(), to make sure
...
that the adapter is disabled even if it wasn't enabled/disabled during
configuring its children. This fixes the bug that if an aic pcmcia card
is inserted in a slot during boot, further attaching of any card on the
slot fails once the card is removed.
1999-10-30 00:58:32 +00:00
augustss
613db45d20
Add MIDI support.
...
Closes PR 8578.
1999-10-29 23:03:18 +00:00
matt
b2db663942
fix entry for lemac on isa. add entry for wavelan on isa
1999-10-29 21:38:04 +00:00
matt
5fcccf1e9c
Add a placeholder for the ISA WaveLAN card
1999-10-29 21:35:43 +00:00
matt
471ab17680
Regen.
1999-10-29 21:31:30 +00:00
matt
c707186f57
Add AHA-1480 (adaptec cardbus scsi)
1999-10-29 21:30:19 +00:00
ragge
12c16f443f
DEC specifies that dealing with CSR0 in the interrupt routine must be
...
done in a special order. Do that here also, but for now inside #ifdef vax
because of the (possible) impact on other arch's.
Now vaxen without IOMMU can use the MI LANCE driver.
1999-10-29 19:50:07 +00:00
mycroft
e45ef6abcd
Emulate the Linux DVD_* ioctls(2). This gets us 90% of the way to running the
...
LiViD DVD player. (See forthcoming mail to current-users.)
XXX NOTE: We should do something to probe capabilities, rather than allowing
these ioctls on any device.
1999-10-29 15:02:56 +00:00
joda
ee08428d1c
handle multi function cards
1999-10-29 12:02:13 +00:00
joda
1ea6cd1de0
add cardbus_exrom.c to cardbus device
1999-10-29 11:31:40 +00:00
joda
54fed4c419
add support for reading memory mapped CIS via BAR or EXROM register
1999-10-29 11:30:27 +00:00
haya
65c3b4c4c7
Maintainance the name of Ricoh PCI-CardBus bridges.
1999-10-29 07:57:38 +00:00
haya
47fc621312
Remove unnecessary check in cardbusmatch.
1999-10-29 07:29:08 +00:00
haya
dd9c83a378
Change cardbus messages when cardbus does not configured.
1999-10-29 07:27:43 +00:00
thorpej
9d820e6fab
Add some 21142/21143 goo.
1999-10-28 23:32:37 +00:00
joda
8ff7881953
add macro to get ROM image number, given a CIS pointer
1999-10-28 22:29:04 +00:00