40be71a246
bump up number of SLIP pseudo-devs to 4
1993-12-10 16:22:58 +00:00
0e5dbe1a22
IF_LLC0 -> IF_LINK0
1993-12-10 10:57:40 +00:00
e4f36e2ea9
Remove excess cruft. This machine has too little memory for unused baggage.
1993-12-10 08:55:32 +00:00
714c5818db
Make sure the high 16 bits of cpl gets a sane value (0) when reloading after a
...
process switch. (HI THEO!)
1993-12-10 08:51:28 +00:00
7e2c70ce74
Add random.s for multicast stuff.
1993-12-10 05:38:37 +00:00
dc1b697fb8
More multicast stuff
...
>From cmaeda@cs.washington.edu
These patches are derived from the IP Multicast patches for BSDI.
1993-12-10 05:37:33 +00:00
3a4bc73f21
More multicast related stuff.
...
>From Chris Maeda, cmaeda@cs.washington.edu
These patches are derived from the IP Multicast patches for BSDI.
1993-12-09 00:32:14 +00:00
9a48e42157
__386BSD__ -> __NetBSD__
1993-12-07 12:51:58 +00:00
fb60f2ced9
Turn off special mask mode by default. It is clearly not supported enough.
1993-12-05 11:20:09 +00:00
b26f063ecf
add MACHINE_ARCH as i386
1993-12-04 02:04:31 +00:00
c05bd599a0
i have an ep
1993-12-04 01:20:51 +00:00
8ca56a8a85
ep driver..
1993-12-03 12:02:38 +00:00
720d26b6bf
Add dummy speakerattach() until it's made into a real device. Reported by
...
Mark_Weaver@brown.edu .
1993-12-03 09:37:56 +00:00
c69bc4a95f
I have a scsi controller now!
1993-12-03 05:31:03 +00:00
0977b6ec81
add ep driver
1993-12-03 02:58:42 +00:00
3956e86fbd
Enable mcd0.
1993-11-29 18:19:29 +00:00
7095375da9
Enable ch*.
1993-11-29 04:59:26 +00:00
aadbc0a6da
Remove explicit port for ahb[01].
1993-11-29 01:03:44 +00:00
4e20653888
Enable ahb[01].
1993-11-29 00:39:21 +00:00
6ac9e15bb1
New test config.
1993-11-28 10:50:44 +00:00
4acf267f87
Enable uha[01].
1993-11-26 10:50:36 +00:00
003abe0b84
Enable st and cd.
1993-11-25 08:01:13 +00:00
11ba2e43d8
Enable aha[01], sd*.
1993-11-24 03:26:04 +00:00
7abca02b8a
added two copyright strings at the request of Gary Clark II
...
<gclarkii@freefall.cdrom.com>, because he hacked and is in the process
of hacking the code significantly.
1993-11-17 12:22:50 +00:00
183fd1b02f
cut down SHMMAXPGS (temporary)
1993-11-15 11:41:54 +00:00
7377ae9734
Support for ESIS over X.25 is not complete.
1993-11-14 19:40:47 +00:00
9c68389ee6
Junk PARANOID.
1993-11-14 17:58:12 +00:00
c237d6b7d7
Fix typo in last change.
1993-11-14 17:42:19 +00:00
bc94b1cf89
Add a few things that were missing, and fix some comments.
1993-11-14 17:41:37 +00:00
fa0d8faf42
Update from trunk:
...
Add the System V message queue and semaphore facilities. Implemented
by Daniel Boulet <danny@BouletFermat.ab.ca>
1993-11-14 14:45:16 +00:00
c5446cd8e0
add SYSVMSG and SYSVSEM
1993-11-14 14:40:44 +00:00
4878a43c3d
Add the System V message queue and semaphore facilities. Implemented
...
by Daniel Boulet <danny@BouletFermat.ab.ca>
1993-11-14 13:21:59 +00:00
5f65d904b7
Don't skip BIOS variables on boot if load address isn't 0
1993-11-13 16:31:48 +00:00
243bc4cc05
Boundary check on backspace.
1993-11-11 15:43:52 +00:00
b41210b362
add addr32, as noted on freebsd-hackers by bde himself.
1993-11-10 16:08:19 +00:00
2f5635f70b
A slightly unfinished i82586 driver, based on Garrett Wollman's.
1993-11-08 20:15:31 +00:00
5aa77a4ddc
Enable ie0.
1993-11-08 20:10:32 +00:00
34178aa2ef
don't use splclock()/splnone(), use splclock()/splx().
...
pointed out by david greenman.
1993-11-05 23:18:51 +00:00
ab12bacae0
note that use of splnone() is prolly bogus; splnone() itself is bogus,
...
so it's use is. 8-)
1993-11-05 23:18:04 +00:00
6ca8998c91
GENERIC: add mcd0
...
TEST: add mcd0, commented out
files.i386.newconf: add support for mcd driver
1993-11-04 09:28:26 +00:00
08c263706c
add mcd: Mitsumi CD driver by Holger Veit and Brian Moore
1993-11-04 09:12:30 +00:00
3bb5fc8b74
Enable is0.
1993-11-03 21:32:45 +00:00
fa3ccaa273
Change comment about pms.
1993-11-03 13:29:37 +00:00
e163596ee8
Fix some comments and enable tb.
1993-11-03 12:48:31 +00:00
dd896d55b8
A theoretically working version. The probe routine needs work.
1993-11-02 23:59:34 +00:00
6c77f913e9
I have pms. ;-)
1993-11-02 20:40:57 +00:00
3e21ea2e33
tablet line discipline compiles and probably works now.
1993-11-02 06:19:24 +00:00
3103af7e6b
Take advantage of special mask mode by leaving interrupts masked in ISR until
...
they are serviced. No need to frob IMR.
1993-11-01 08:36:50 +00:00
1a2c258aa6
Enable chaining IRQ only if we're using an IRQ on the slave. Other minor
...
cleanup.
1993-11-01 00:06:04 +00:00
44c93f17b5
Grumble. Just set the blasted ICU mode before every read. Also, send the EOIs
...
to the right port in isa_flushintrs().
1993-10-31 20:21:11 +00:00
b1c739de48
Need to change to reading ISR in isa_discoverintr().
1993-10-31 20:11:31 +00:00
58dd8e7222
Read ISR by default. If DIAGNOSTIC, display ISR and IRR status for stray
...
interrupts.
1993-10-31 20:05:43 +00:00
a4cf218142
Rearrange IDT initialization so it's easier to change ICU_OFFSET.
1993-10-31 18:36:21 +00:00
a74a4778b9
Enable fdc1 and assign it drq 3.
1993-10-29 20:38:46 +00:00
0f926f7b02
ttyfree() bugfix edition, plus various minor tweaks.
1993-10-29 08:58:34 +00:00
8bef6d7b03
Enable ed.
1993-10-29 04:33:34 +00:00
7c3008b8d7
kill physstrat
1993-10-29 02:15:30 +00:00
c1f78e111c
Apply fix for PIT_MODE from Keith White <kwhite@csi.UOttawa.CA>
1993-10-28 14:00:54 +00:00
757af3406e
isa_discoverintr(): Also check ipending, in case the interrupt is being shared.
...
Use delay() for timeout rather than timer channel 2.
1993-10-27 17:45:40 +00:00
ebe64b7361
Reenable interrupts in ipending before resetting it.
1993-10-27 08:00:40 +00:00
651d86ab91
Arrange that IF is on but we are at splhigh() during autoconfig. Clear
...
ipending in isa_flushintrs().
1993-10-27 06:48:39 +00:00
b92626678c
Cleanup LDT/GDT defines
1993-10-26 15:53:54 +00:00
5be77b1847
Fix for new ZMAGIC. Define start address.
1993-10-26 15:52:55 +00:00
32ee2e4e3f
Stylistic change to IDT initialization.
1993-10-26 15:45:18 +00:00
79682dc7fe
Replace a %s with %x.
1993-10-26 14:22:41 +00:00
787c131944
Remove bogus port for pccons. Remove ACCOUNTING.
1993-10-26 12:19:38 +00:00
4d9cffef5e
Hard-wire the timer IRQ.
1993-10-26 12:18:28 +00:00
08f5f6a6fa
Add MADDRUNK.
1993-10-26 12:16:35 +00:00
3883efe0da
Fix IDT initialization bug. Don't allow IRQ 0 to be autoconfigured.
1993-10-26 12:10:01 +00:00
899963d591
Latest version of isolan driver.
...
Replaced all static arrays with malloc'ed memory.
Added code so that debug ioctl actually does something.
1993-10-25 03:30:54 +00:00
16a520e7ed
* Revision 2.11 1993/10/23 04:21:03 davidg
...
* Novell probe changed to be invasive because of too many complaints
* about some clone boards not being reset properly and thus not
* found on a warmboot. Yuck.
*
* Revision 2.10 1993/10/23 04:07:12 davidg
* increment output errors if the device times out (done via watchdog)
*
* Revision 2.9 1993/10/23 04:01:45 davidg
* increment input error counter if a packet with a bad length is
* detected.
*
* Revision 2.8 1993/10/15 10:59:56 davidg
* increase maximum time to wait for transmit DMA to complete to 120us.
* call ed_reset() if the time limit is reached instead of trying
* to abort the remote DMA.
*
* Revision 2.7 1993/10/15 10:49:10 davidg
* minor change to way the mbuf pointer temp variable is assigned in
* ed_start (slightly improves code readability)
*
* Revision 2.6 93/10/02 01:12:20 davidg
* use ETHER_ADDR_LEN in NE probe rather than '6'.
1993-10-23 04:59:41 +00:00
3810963ed5
Add at_setup_dmachan(). Minor cleanup.
1993-10-22 20:24:14 +00:00
4b7f8b8a62
It does not make sense to mask a fastintr.
1993-10-22 19:33:13 +00:00
0c9ce6ed1f
New file with interrupt-handling code. Add intr_fasttrap().
1993-10-22 19:27:40 +00:00
f1dda6c852
Add intr.c.
1993-10-22 19:17:32 +00:00
1b8b52c8c5
mapping the mem or kmem devices is *very* dangerous with the current
...
vm system. Don't allow it.
1993-10-21 23:55:02 +00:00
80a3179079
vanquish the tree of the last traces of /dev/acct
1993-10-21 00:29:03 +00:00
430d001c1a
get rid of ACCOUNTING option. it's mandatory, and there's no define any more.
1993-10-20 23:04:52 +00:00
27bc255b86
kill accounting.
1993-10-18 23:22:56 +00:00
d7498e64da
fix the 'size allocated vs. MAXBSIZE' check for buffers. Instead
...
of making vfs_bio *and* machdep.c deal with it, just deal with it
here, where we actually allocate the physical memory for pages.
1993-10-18 23:14:13 +00:00
9eafd05204
Add I486_CPU.
1993-10-18 16:25:42 +00:00
f0c6138247
Made "start" the entry point (for consistency with other "ld" lines).
1993-10-18 14:41:31 +00:00
f8b564f223
Fixed typo.
1993-10-18 14:35:45 +00:00
14ba800a2f
Provided entry point (_boot1) to ld.
...
Use DESTDIR when installing.
1993-10-18 13:34:26 +00:00
14e6ea89aa
Put definition of __LDPGSZ and `struct relocation_info' where they belong:
...
in <machine/exec.h>.
1993-10-18 09:46:56 +00:00
593a6c40ef
Explicit entry point specified in kernel link command.
...
(so far, we've been lucky only because vers.o doesn't contain text)
1993-10-17 20:56:09 +00:00
107d011b19
Add KBR_EXTENDED.
1993-10-17 14:04:15 +00:00
7620c96e5d
Make atdevbase an int.
1993-10-17 14:03:54 +00:00
6067dc9ea8
Minor cleanup.
1993-10-17 05:34:23 +00:00
7e8063835d
Use `swap generic'.
1993-10-16 07:48:04 +00:00
2ce6de16d5
Add isa_establish(), for all it's worth (which is to say, nothing).
1993-10-16 05:25:21 +00:00
c73d85d341
Panic if DMA with odd length attempted on a 16-bit channel.
1993-10-16 03:55:59 +00:00
4bcf529b86
oops; forgot to move these definitions over, before...
1993-10-15 13:47:22 +00:00
fba9bbc5d9
add back the bufpages limit
1993-10-15 11:55:39 +00:00
4f94812b29
New file with DMA code from isa.c, modified to check for some errors.
1993-10-14 05:22:57 +00:00
5448e175cf
Only include isa/dma.c if a driver which needs it is configured.
1993-10-14 05:17:24 +00:00
0eabc3bc13
sysarch() belongs in sys_machdep.c
1993-10-13 08:25:57 +00:00
a1c3bf517a
use the new location for libkern, auto-depend on it, and include
...
the right one, for profiling or non-profiling.
1993-10-13 06:43:17 +00:00
d466119aa4
Convert space to tabs on the trapframe and sigframe lines
1993-10-10 07:23:34 +00:00
4119b752e0
Add symbols KERNSIZE and PDRSHIFT so that they can be used along with
...
KERNBASE to caclulate several constants in locore.s used for setting
up the vm system.
1993-10-10 07:07:52 +00:00
cgd