142ab5b1ec
Move lsu stuff to more logical locations, and push queueing into the lsu
...
driver.
2000-11-08 19:20:33 +00:00
d0c3ebd9d8
Make the test for dmareg >= 0x10000 quirked on IDE_16BIT_IOSPACE
2000-11-08 18:22:27 +00:00
88cbfbe36d
Move guts of pciide_print_modes() to wdc_print_modes() so that non-pciide
...
wdc drivers (like macppc's obio IDE interface) can use it. Also add
support to both wd attach line and to wdc_print_modes() to print
Ultra/{33,66,100} for respective UDMA modes (From Manuel Bouyer).
2000-11-08 17:57:36 +00:00
f0bd09f42d
Merge in my some of my stuff.
2000-11-05 22:35:56 +00:00
43ff857e29
Don't allow use of mapreg is they are at or above 0x10000 in I/O space. (in
...
other words, if the address uses bits in the top 16 bits, don't use it).
2000-11-05 21:14:59 +00:00
e83458422f
First Prototype implementation of network interface part for IEEE1394 (if_fw).
...
Current status:
Only OHCI chip is supported (fwohci).
ping (IPv4) works with Sony's implementation (SmartConnect) on Win98.
sometimes works but not stable.
Not implemented yet:
IRM (Isochronous Resource Manager) functionality.
Link layer fragmentation.
Topology map.
More to do:
clean ups
MCAP
charactor device part
dhcp
There is no entry in GENERIC config file yet.
Follow sys/dev/ieee1394/IMPLEMENTATION to enable if_fw.
2000-11-05 17:17:12 +00:00
1363813e0d
Two things off the TODO list.
2000-11-05 16:44:08 +00:00
cde4f7415c
Add mmap support (i386-specific for the moment).
2000-11-05 16:24:45 +00:00
5a8a59d459
Weed out the Dell and HP versions which are known to work in
...
WSS emulation mode (i.e. won't work in AC'97 mode).
2000-11-05 16:13:17 +00:00
70b3814a53
Add NeoMagic 256 audio.
2000-11-05 06:46:03 +00:00
f945fc008d
Driver for NeoMagic 256 audio. Based on the OpenBSD driver, which is
...
in turn based on the FreeBSD driver, ported to NetBSD and somewhat
modified by me. Thanks to Matt Thomas for testing.
2000-11-05 06:43:45 +00:00
8e0eb1dc12
viaenv carries the sysmon_envsys attribute.
2000-11-05 04:06:53 +00:00
f3c38af11b
Regen.
2000-11-04 16:43:14 +00:00
601bcf9813
Add a couple NeoMagic products. From OpenBSD.
2000-11-04 16:41:57 +00:00
96d994ecae
regen.
2000-11-03 16:31:51 +00:00
10885fbd47
Oops
2000-11-03 16:31:01 +00:00
62d4f894dc
Regen.
2000-11-03 15:57:33 +00:00
3789452cb3
Pequr Technology is now called ServerWorks.
2000-11-03 15:54:02 +00:00
507aaec04c
Adapt to the new line discipline scheme.
2000-11-02 00:01:44 +00:00
55b8e84db5
Delete more files before import.
2000-10-28 14:51:08 +00:00
d91eb6a0c3
Replace remaining vm_offset_t's in NetBSD code by vaddr_t; remove now
...
unnecessary casts added by thorpej in 1.11 of bktr_core.c. Strike one
from the TODO list.
2000-10-28 14:50:27 +00:00
134608261c
Merge 2.17 changes to trunk.
2000-10-28 14:31:57 +00:00
9732164f76
Import release 2.17 of the bktr driver.
...
Changes: Integration of some NetBSD changes. (FreeBSD version now is also
usable as a KLD (~= LKM).)
2000-10-28 14:17:40 +00:00
d214b09b47
Increase initial Tx drain threshold to 512 bytes.
...
My macppc complains about transmit FIFO underrun every time.
2000-10-28 08:36:57 +00:00
4295299769
Regen.
2000-10-27 22:43:44 +00:00
86342bb610
Add a bunch of Intel PCI chipsets. From OpenBSD.
2000-10-27 22:43:28 +00:00
1b15310aaa
Regen.
2000-10-27 17:37:02 +00:00
24cba36ced
Add a bunch of Pequr (ServerWorks) products. From OpenBSD.
2000-10-27 17:36:44 +00:00
528e314143
Work around a fatal firmware bug on some boards. From msmith@freebsd.org.
2000-10-26 14:43:50 +00:00
b44679b7ec
Bugfix: reset 16-bit pcmcia in chip initialisation sequence.
2000-10-25 09:15:58 +00:00
cce4838c1f
Add ram size to struct properties, and pass it to the bus independant part.
2000-10-23 14:57:23 +00:00
833dea96d1
- tsleep()/wakeup_one() will hurt when under load, so use a queue instead.
...
- Don't copy to or from the aligned buffer unless there's a need to.
2000-10-20 15:14:25 +00:00
16a062538b
Nuke unused includes, sort decls.
2000-10-19 15:31:20 +00:00
e9b69699e0
Hook in twe.
2000-10-19 14:24:44 +00:00
9813a10184
Driver for the 3ware Escalade family of RAID controllers.
2000-10-19 14:11:30 +00:00
5247e9db0b
Regen.
2000-10-19 05:52:15 +00:00
24477b4281
Add the ICS Advent PCI-WDT500/501 watchdog timer boards.
2000-10-19 05:51:34 +00:00
cecccb23b2
quiet chatty boot messages
2000-10-17 17:39:10 +00:00
3607efd3d7
Remember to establish default PORT WWN. Add in some LOGDEBUG2 messages
...
for the dma mapping code.
2000-10-16 05:12:26 +00:00
4318834442
Don't trim off the FCS, pass it up.
2000-10-15 19:56:31 +00:00
c8d4a6140c
Regen
2000-10-14 06:23:21 +00:00
30dbba4dd1
Add ATI Mobility M3 (both PCI and AGP).
2000-10-14 06:12:46 +00:00
32e7a2cd70
hifn7751 crypto card driver. from openbsd.
...
does nothing useful at this moment - initailize the chip, that's all.
TODO: crypto logic framework in kernel (see openbsd sys/crypto)
TODO: ipsec frontend (need major rework in ipsec tree - should start with busywait)
TODO: character device frontend
2000-10-12 02:59:59 +00:00
8d7ce38746
regen
2000-10-12 02:54:13 +00:00
429b0af909
pci device ID for hifn 7751-based crypto cards. from openbsd.
2000-10-12 02:52:58 +00:00
2198741306
Use ether_ioctl().
2000-10-11 16:57:45 +00:00
a3dbabc67b
Update for current PCI device class/subclass and capability codes.
...
(also, tweak the I2O subclass string to be "standard" -- the removal
of version info didn't extend that far.)
2000-10-07 18:58:13 +00:00
a2c02690af
only VT82C586A rev >= 6 supports Ultra-DMA. From OpenBSD.
2000-10-04 09:34:09 +00:00
7edd5d54bc
Add support for the ADMtek AN983 and AN985.
2000-10-03 04:32:00 +00:00
4462a44b87
Regen: ADMtek AN985
2000-10-03 02:59:05 +00:00
618e7b93c6
Add ADMtek AN985 10/100 Ethernet.
2000-10-03 02:58:30 +00:00
903ae58e7b
I2O subclasses currently have nothing to do with the protocol version.
2000-10-02 14:48:13 +00:00
7ca3fb9ef0
Move the check for "promisc + unicast + not for us" into ether_input(),
...
and change Ethernet drivers to always pass all received frames to
ether_input() (with a few exceptions, which are documented in the
code).
2000-10-01 23:32:39 +00:00
f4ef578da7
6 -> ETHER_ADDR_LEN
2000-09-28 10:29:42 +00:00
4a8619ae15
Match the i82562.
2000-09-27 10:54:55 +00:00
815d8f961b
Regen.
2000-09-27 02:15:30 +00:00
c3fa0043b1
Add some ATI Rage cards and some Intel chips.
2000-09-27 02:14:54 +00:00
44c90f4ef1
Pasto; shouldn't have bitten anyone.
2000-09-26 11:38:47 +00:00
70c8ada2ad
Add calls to ether_addmulti and ether_delmulti. This code looks a bit
...
different than other drivers due to the way ti_setmulti manages the
filters. Patch from Keijiro Ehara.
2000-09-24 14:19:52 +00:00
5fea96167f
use new generic bootverbose instead of local definition
2000-09-24 12:37:03 +00:00
a429573227
Some more register definitions for the DP83815.
2000-09-21 04:05:43 +00:00
236deb1acc
Apply a patch from the driver author (originally from OpenBSD).
2000-09-20 14:33:48 +00:00
e925979f9b
Preliminary support for the National Semiconductor DP83815 10/100
...
Ethernet chip, which is based on the SiS 900 core, but with differences
in the PHY and filter programming interface, and different WoL and
802.3x flow control programming.
This chip appears on new NetGear FA-312TX cards. Thank goodness
they're finally ditching the LiteOn chips.
2000-09-20 05:44:48 +00:00
b8675d1bea
Add additional register defintions for the National Semiconductor
...
DP83815, which is based on the SiS900 core.
2000-09-20 02:08:44 +00:00
24f4ce3eb0
Regen.
2000-09-20 00:46:35 +00:00
6cc3e82c48
Add National Semiconductor DP83815 10/100 Ethernet.
2000-09-20 00:46:10 +00:00
c5d8401866
Add support for the 3c555, 556 and 556B MiniPCI cards. Based on the
...
cardbus code and the FreeBSD xl driver.
2000-09-19 01:15:06 +00:00
af02376ac9
Regen.
2000-09-19 01:11:38 +00:00
fbf3c412e4
Add IDs for the 3c555, 556 and 556B 3Com MinPCI Ethernet cards.
2000-09-19 01:10:48 +00:00
dd9df6ffdf
Use correct product id for VIA VT6102 chip. Problem pointed out by
...
Jaromir Doleeek in private e-mail.
2000-09-13 16:40:15 +00:00
dcdc66f936
Regen.
2000-09-13 15:58:13 +00:00
b9bacc07be
Add product IDs for AMI MegaRAID boards.
2000-09-13 14:45:09 +00:00
d4a2e19802
Add support VIA VT6102 chip found e.g on the D-Link DFE530TX NIC.
...
Fixes PR kern/11001 by Petter Lindquist.
2000-09-13 14:00:48 +00:00
ea2fc5c0fd
Regen.
2000-09-13 13:58:25 +00:00
928a30552d
Remove incomplete (and incorrect) entry for D-Link 530.
2000-09-13 13:58:06 +00:00
e6debfdcbf
Regen.
2000-09-13 13:53:22 +00:00
a42050f3e7
Use "VT6102 (Rhine II) 10/100 Ethernet" as description to be consistent
...
with existing entry for "VT86C100A (Rhine-II) 10/100 Ethernet".
2000-09-13 13:53:06 +00:00
0c0911bb54
Regen.
2000-09-13 13:48:44 +00:00
d6cf9f28b0
Add VT6102 Rhine II 10/100BaseTX ethernet chip used on e.g. the
...
D-Link 530TX NIC.
2000-09-13 13:48:09 +00:00
f0c15086d2
Regen.
2000-09-07 23:26:41 +00:00
36d7d0f902
s/AT&T Microelectronics/Lucent Technologies/
2000-09-07 23:26:28 +00:00
08e45b3689
Cast the argument to vtophys() to vaddr_t.
2000-09-06 18:56:45 +00:00
2a11ec9347
Add definition for "Actiontec 56K PCI Master", from Bill Hudspeth.
2000-09-06 15:27:37 +00:00
130aad8a7d
ANSIfy.
2000-09-06 00:17:23 +00:00
3cf4e948c1
Cast arg to vtophys() to vaddr_t.
2000-09-05 22:37:33 +00:00
6ade619f58
Regen.
2000-09-04 20:44:37 +00:00
176549d557
Add Intel 440GX host bridge.
2000-09-04 20:30:50 +00:00
fe2b627962
Fix 'RAID unsupported' printf.
2000-09-04 20:21:30 +00:00
ac5ac55b06
Add support for the AAA-131 RAID controller by treating it as a 7890.
...
Taken from rev 1.32 of the FreeBSD ahc_pci.c.
2000-09-04 19:56:04 +00:00
824ddfd20e
regen
2000-09-04 13:13:36 +00:00
4f6829605c
Brooktree Bt8474 Multichannel Synchronous Communictaions Controller (MUSYCC)
2000-09-04 13:13:14 +00:00
c384f772f0
remove one
2000-09-03 02:05:44 +00:00
3a2e8fdc05
Use NetBSD's pcidevs file for vendors/cards as much as possible.
...
Recognize Pinnacle Studio PCTV Rave as Miro card, tested by rh@netbsd.org .
2000-09-03 02:01:32 +00:00
cfd89531b4
don't attempt to size Host Bridge BARs. (it's a good way to die.)
...
provide a clue about 16-bit vs. 32-bit I/O BARs.
2000-09-02 00:48:20 +00:00
6a22a36219
regen for changed pcidevs
2000-09-02 00:33:25 +00:00
dae6b41d27
after discussion with veego, rename constant for 3D Labs Permedia 2 from
...
PERMEDI2 to PERMEDIA2. (substance over style. 8-) Also, fix a typo
I noticed in a comment.
2000-09-02 00:32:15 +00:00
702747900f
- Interface cleanup. static, const in places.
...
- cac_pci_l0 has been moved to cac.c, since it's useful for EISA boards.
- Model-specific linkage now is responsible for DMA synchronization.
- If we don't recognise the board, print the subsystem ID.
- Add support for RAID LC2 and Smart Array 431.
- Start firmware background tasks on controllers that need it.
2000-09-01 12:13:08 +00:00
0bc8e23c3a
even through the integrated audio on my MSI 694D Pro
...
does not set AC97_CODEC_DOES_VRA in AC97_REG_EXT_AUDIO_ID request, it
works okay; only require the bit set for revision < 'H'
2000-09-01 00:02:04 +00:00
4739c00231
regen
2000-08-29 01:18:17 +00:00
52454a3dd6
add vendors HAUPPAUGE, ASKEY, AVERMEDIA
2000-08-29 01:17:06 +00:00
ad