mrg
7c15053eed
remove include of <vm/vm.h>. <vm/vm.h> -> <uvm/uvm_extern.h>
2000-06-28 16:08:42 +00:00
tron
bddc013764
Add special IRQ handler for CMD PCI0648 and PCI0649 taken from the
...
experimental version of Manuel Bouyer's driver.
2000-06-27 05:57:05 +00:00
simonb
bfc5613f54
Revert some of the previous mmap() changes that were in "#ifdef FreeBSD"
...
parts of this file.
2000-06-27 05:14:31 +00:00
mrg
f4e210fb2c
remove redundant vm includes
2000-06-26 15:26:35 +00:00
mrg
2f159a1bac
remove/move more mach vm header files:
...
<vm/pglist.h> -> <uvm/uvm_pglist.h>
<vm/vm_inherit.h> -> <uvm/uvm_inherit.h>
<vm/vm_kern.h> -> into <uvm/uvm_extern.h>
<vm/vm_object.h> -> nothing
<vm/vm_pager.h> -> into <uvm/uvm_pager.h>
also includes a bunch of <vm/vm_page.h> include removals (due to redudancy
with <vm/vm.h>), and a scattering of other similar headers.
2000-06-26 14:20:25 +00:00
bouyer
8a0d96e59e
Add support for the CMD PCI0648 and PCI0649 IDE controllers.
...
Thanks to Matthias Scheler for testing.
2000-06-26 10:07:52 +00:00
bouyer
2e861ca3ce
Correct 80 pin handling for promise Ultra/66: when the bit is set
...
we *don't* have a Ultra/66 cable.
2000-06-26 09:55:26 +00:00
simonb
889c658b5b
Change the kernel mmap interface so that the offset to map is an
...
"off_t" and the return value is a "paddr_t" to allow mappings
at offsets past 2^31 bytes. Somewhat inspired by FreeBSD, which
only changed the offset to a "vm_offset_t".
Includes updates for the i386, pc532 and sh3 mmmmap from Jason Thorpe.
2000-06-26 04:55:19 +00:00
gmcgarry
10eccb55ca
cmpci requires mulaw dependency.
2000-06-25 23:34:27 +00:00
sommerfeld
fda426af2c
Defopt TLP_MATCH_*
2000-06-25 18:49:22 +00:00
wiz
3628d5523b
printf argument was in wrong position. Noted by Roger Hardiman
...
<roger@cs.strath.ac.uk>. (This code was ifdef'd out by default.)
2000-06-25 17:47:39 +00:00
eeh
79dffec702
Get PCI HME working.
2000-06-25 01:05:16 +00:00
joda
1e343745fc
regen
2000-06-24 12:16:55 +00:00
joda
103a704990
add Intel 82801BA devices
2000-06-24 12:16:21 +00:00
thorpej
f82e306928
Add a clearing-house pseudo-device for system monitoring devices
...
such as the LM78 and VT82C686A (and eventually ACPI). Multiple
sensor devices can be hooked registered with `sysmon', and eventually
sysmon will also handle hardware (and software) watchdog timers.
Convert the `lm' and `viaenv' drivers to the new interface.
2000-06-24 00:37:19 +00:00
tron
bc83dce0c6
Regen.
2000-06-21 09:16:16 +00:00
bouyer
0273966f04
Add CMD PCI0649 product ID.
2000-06-21 08:58:57 +00:00
cgd
eee18e1f6c
beat back the undead: __BROKEN_INDIRECT_CONFIG had risen, and was
...
terrorizing innocent hackers...
2000-06-16 23:41:33 +00:00
soren
0011842ea8
Regen.
2000-06-16 08:13:50 +00:00
soren
567c710f2b
Add some S3 chips.
2000-06-16 08:13:25 +00:00
thorpej
17de155949
Make sure we use firmware->host communication channel in cz_intr(), from
...
Bill Studenmund.
2000-06-14 17:54:33 +00:00
soda
c521ba58c1
yet another change for NEC RISCstation 2250 of arc port.
2000-06-14 00:34:33 +00:00
tron
3e3d2d7344
Regen.
2000-06-13 22:44:51 +00:00
tron
d643d25eb9
Add CMD PCI0648.
2000-06-13 22:44:19 +00:00
ad
3553879fc2
Use my proper name.
2000-06-13 13:36:42 +00:00
nathanw
31c0cc5f46
Regen.
2000-06-12 22:33:41 +00:00
nathanw
72d31d8d37
Add AMD 79c978 PCnet-PCI Home.
2000-06-12 22:33:06 +00:00
bouyer
26bbb4f200
Regen.
2000-06-12 21:25:20 +00:00
bouyer
034590578d
Shorter description for the HPT366
2000-06-12 21:25:01 +00:00
bouyer
b21bc1b5b6
- add a pciide_irqack() callback, which clears the IDE DMA status bit once
...
the IRQ has been cleared on the drive.
- use pa->pa_class instead of re-reading PCI_CLASS_REG when possible
- Add support for Highpoint HPT366 and HPT370 (370 untested), based
on patches from Roger Brooks <R.S.Brooks@liverpool.ac.uk> posted on
current-users Mach, 15. Given how Highpoint docs have been wrong for the
366, the 370 is likely to not work.
Thanks to Chris Cappuccio <chris@dqc.org> for sending me the Highpoint
docs, and to Total Archive (http://www.totalarchive.com/ ) for sending
me hardware.
2000-06-12 21:20:51 +00:00
bouyer
8642ac97bf
Regen.
2000-06-12 21:12:59 +00:00
bouyer
1970e14b93
Add HPT366/370 device ID.
...
XXX Is 'TRIONES' the rigth vendor name ?
2000-06-12 21:12:30 +00:00
wrstuden
eb21ed4746
Adapt to going back to decemal device numbering.
2000-06-09 18:00:45 +00:00
wrstuden
8d04cd3f90
Rather than assinging 64 tty's per pci card, assign tty's as found.
...
Cyclades says driver should work with up to 128 tty's per pci card
even though they only support 64 now. Also matches FreeBSD behavior.
Print located tty's using new tty naming scheme - ttyCZ?? where ?? are
two hex letters.
Make firmware load on macppc - one le32toh() was missing.
2000-06-09 16:53:23 +00:00
soda
8ac7bdd00c
changes for NEC RISCstation 2250 of arc port.
2000-06-09 04:48:12 +00:00
soda
77625cf7ec
long long constant needs "LL" suffix.
2000-06-09 04:45:53 +00:00
augustss
b8f4f2be87
Regen.
2000-06-09 00:21:08 +00:00
augustss
def28a5cd2
Add some PCI devices found in the IOpener (commited from the IOpener itself :).
2000-06-09 00:20:18 +00:00
gmcgarry
6dd21e55a9
Make attach messages consistent with PCI drivers. Make function pointer
...
usage consistent with other drivers.
2000-06-08 22:15:52 +00:00
haya
b6a821f042
Change IPL when bridge's interrupt handler calls child device's
...
interrupt handler (This solution is not very good).
2000-06-08 10:28:28 +00:00
scw
295ed77595
The OPTi controller supports a 32-bit dataport after all.
...
Also detect when the chip is sitting on a 25MHz PCIbus and
set the timing registers accordingly.
2000-06-07 20:42:52 +00:00
ad
887d4555cd
Regen.
2000-06-07 19:53:17 +00:00
ad
4837200a8c
Add vendor/device ID for 3ware Escalade IDE RAID controller.
2000-06-07 19:52:07 +00:00
mrg
a67130a218
regen.
2000-06-07 09:55:22 +00:00
mrg
09b843b7f6
fix a couple of the sun entries.
2000-06-07 09:52:16 +00:00
haya
dca97557cd
Add CB_BCR_RESET_ENABLE in bridge control resister's bit definition.
2000-06-07 09:02:46 +00:00
thorpej
b15bbb90f9
Add missing break;
2000-06-07 04:31:49 +00:00
soren
13ed0863f8
Regen.
2000-06-07 01:58:17 +00:00
soren
e2c1012576
Add Trident 9397DVD.
2000-06-07 01:57:30 +00:00
thorpej
c85d6d7ca3
Improve the Cypress name a little.
2000-06-06 22:56:06 +00:00
thorpej
a452638f06
In pciide_mapreg_dma(), check to see what type the BAR is before
...
mapping the registers, as suggested by a comment in that function.
2000-06-06 22:47:22 +00:00
soren
ba5df2479b
Shorten names of VIA controllers to fit in 80 columns with versions.
2000-06-06 17:48:12 +00:00
thorpej
c40fa3c4d4
Actually program the DMA mode of the drives into the Cypress
...
controller. Fixes a long-standing problem where IDE DMA wasn't
working on the AlphaPC 164SX.
2000-06-06 17:34:22 +00:00
kleink
05d7f969b9
Regen.
2000-06-06 07:55:50 +00:00
kleink
aed5858e8b
Add the product ID for the ESS Maestro 3 modem function as well.
2000-06-06 07:55:17 +00:00
thorpej
21d9669e4f
Common routines for read/writing Cypress 82c693 control registers. Needed
...
by `pciide' and the Alpha `sio' (PCI-ISA bridge) driver.
2000-06-06 03:07:39 +00:00
tsutsui
8c4d1bf1f9
Adapt MI ncr53c9x changes.
2000-06-05 15:08:00 +00:00
kleink
ca3d9c7fa7
Regen.
2000-06-05 11:34:07 +00:00
kleink
428a7ca4e3
Add the ESS Maestro 3 product ID as well.
2000-06-05 11:33:35 +00:00
kleink
9b40e3731a
Regen.
2000-06-05 11:31:15 +00:00
kleink
be40495bb0
ESSTECH:
...
* add what's allegedly the Maestro 1's product ID.
* align product names with data sheets.
2000-06-05 11:29:28 +00:00
gmcgarry
745e3fef63
pciiide -> pciide
2000-06-04 22:22:12 +00:00
tsutsui
f44619d89d
KNF some lines.
2000-06-02 18:34:05 +00:00
augustss
87a5ae384c
Update URLs.
2000-06-01 09:58:19 +00:00
augustss
f1b4af5ba1
Make this compile too.
2000-05-30 08:36:27 +00:00
matt
e78793c612
Beginning of a IEEE 1394 framework. An attachment for PCI OHCI controllers
...
and bus-independent module that just begins to print things out. No real
code behind it. THIS IS A WORK IN PROGRESS. The *reg.h are woefully
incomplete.
2000-05-30 06:56:13 +00:00
matt
c7326acd04
Add the PCI attachment for IEEE 1394 OHCI controllers. Files to follow later.
2000-05-30 00:53:14 +00:00
matt
fd1991294f
Regen
2000-05-30 00:21:07 +00:00
matt
adaaa34784
Add the TI 1394 controllers. Makes all the 1394 controller descriptions
...
similar.
2000-05-30 00:20:41 +00:00
tsubai
8cde93a435
* Support (not so) new cards. (only Cyclom-8YsP+ is tested)
...
* Make compilable with CY_DEBUG.
2000-05-29 12:05:41 +00:00
drochner
c461529353
regen
2000-05-28 10:25:25 +00:00
drochner
f8091908b5
-correct description for 3c905b-FX (100 Mb only)
...
-add Neomagic 256ZX
2000-05-28 10:24:57 +00:00
thorpej
3a4393ff92
While DM9102A boards tend to have ISV-format SROMs (likely to describe
...
the HomePNA PHY typically connected to the external MII interface),
DM9102 implementations (often found on motherboards) do not. Handle
this.
2000-05-27 19:42:06 +00:00
scw
46807640c7
Add support for the OPTi 82c621 PCIIDE controller and its derivatives.
...
I only have a Compaq laptop on which to test this, so reports of
success/failure in other systems would be welcomed.
2000-05-27 17:18:41 +00:00
scw
1d2a3e79a9
Regen.
2000-05-27 17:12:36 +00:00
scw
713621eb0e
Add entries for a couple of OPTi PCI-IDE controllers.
2000-05-27 17:11:37 +00:00
nathanw
00369993f9
Whitespace police.
2000-05-27 16:38:02 +00:00
soren
ed0572ca92
Regen.
2000-05-27 11:40:04 +00:00
soren
eaef48d317
Add a few devices.
2000-05-27 11:38:31 +00:00
thorpej
8a3725612d
Add support for the Davicom DM9102 and DM9102A 10/100 Ethernet chips.
...
Partially based on diffs submitted by Matthew Orgass <darkstar@pgh.net>
and IWAMOTO Toshihiro <iwamoto@sat.t.u-tokyo.ac.jp>.
2000-05-26 16:38:13 +00:00
dante
3d7bdc4c94
Fix a bug introduced in last commit which caused a painc due to
...
re-enqueueing an already free ccb.
Prepare the background to have a unique initialization function for
all of the supported host adapters.
Rename a lot of #define in a more sane way.
Move Carriers initialization and defines in adwmcode.{c,h}
Don't lose Carrier nodes in case of a BUS/Chip reset explicitly invoked
after a DMA failure.
XXX - DMA failure still arise when AdvanSys U[2]W host adapters are used
in conjunction with Intel 82443BX Host Bridge/Controller (rev. 0x03).
!?!Have to understand why!?!
2000-05-26 15:13:43 +00:00
matt
bf05730540
Regen.
2000-05-26 05:07:02 +00:00
matt
5bd1e75033
Add NEC 1394 OHCI chips
2000-05-26 05:06:27 +00:00
bouyer
b063b2ec36
Separate the sheduler from the main script, allocate another DMA-safe
...
memory page for the sheduler. Put the main script in the on-chip RAM when
available.
Avoid a null-pointer dereference when DSA is invalid.
2000-05-25 10:10:54 +00:00
thorpej
4f92d2cd54
Update from Bill Studenmund <wrstuden@zembu.com>:
...
- Note that the FreeBSD driver distributed by Cyclades served as
documentation on how the board works.
- Use the wait-until-pending-I/O-completes-before-loading-parameters
command in czttyparam().
- Pass BREAKs up to the tty later properly.
- Garbage-collect some debugging code.
2000-05-24 22:26:35 +00:00
thorpej
8f7304f9b7
Typo in previous.
2000-05-23 16:47:44 +00:00
thorpej
5c9920bbb6
Update from Bill Studenmund <wrstuden@zembu.com>:
...
Correctly send and receive BREAKs -- still needs to do something
intelligent with them. Some additional debugging goo.
2000-05-23 01:02:21 +00:00
wiz
c2b6147132
Replaced overlooked BROOKTREE_SYSTEM_DEFAULT with BKTR_SYSTEM_DEFAULT,
...
as noted by Roger Hardiman.
2000-05-22 01:00:29 +00:00
wiz
56cb02c358
Use bktr_softc.bktr_dev.dv_xname instead of "bktr0" when printf'ing as
...
requested by Klaus Klein in kern/10166.
Also add device instance name to all printf's that didn't have it.
2000-05-21 15:43:56 +00:00
augustss
c3e3a945cc
Add a missing bktr%d: in one of the attach messages.
...
(When is this code going to be KNFed?)
2000-05-20 16:16:15 +00:00
tsutsui
f2973e2fb8
- Change RL_* -> RTK_*
...
- Free bus_dma resources if attach fails
- Add detach and power management code
Patch from Masanori Kanaoka <kanaoka@ann.hi-ho.ne.jp> in kern/10156.
2000-05-19 13:42:29 +00:00
thorpej
3e403cdb65
In tiocm_to_cztty(), use SET() instead of CLR() in the
...
TIOCMBIS case. "Oops!"
2000-05-19 06:01:14 +00:00
thorpej
59164fe0fc
Fix an inverted test.
2000-05-18 17:55:17 +00:00
drochner
6095f60587
regen
2000-05-18 13:04:27 +00:00
drochner
309b0ed70d
fix typo in last commit
2000-05-18 13:03:31 +00:00
garbled
4d3e8e6976
regen
2000-05-18 08:03:22 +00:00
garbled
81fd58c65b
Add the device ID for the IBM MPIC-II.
2000-05-18 08:02:19 +00:00
thorpej
5274a6162f
Add a device driver for the Cyclades-Z series of intelligent multi-port
...
serial boards. Written by Jason R. Thorpe and Bill Studenmund.
2000-05-17 17:58:09 +00:00
thorpej
07ea678d4d
Register definitions and preliminary API definition for the PLX 9060
...
family of PCI bus controllers.
2000-05-17 17:47:00 +00:00
bouyer
c4042e45a5
Sync my copyrigth notice.
2000-05-15 08:46:00 +00:00
bouyer
e557084177
Update for siop split.
2000-05-15 08:27:24 +00:00
bouyer
a1c4db6c37
- split siop_pci in attachements vs helper functions, for comming esiop
...
- add a reset callback to enable PCI-specific features. This improve bandwith
by a factor of 2 on my alpha with a 875 !
- sync copyrigth notice
2000-05-15 07:53:17 +00:00
thorpej
e5ae7c287a
Symbol namespace cleanup: rl_ -> rtk_
2000-05-15 01:55:12 +00:00
thorpej
a4b298224a
Use <dev/ic/ac97reg.h>
2000-05-15 01:35:29 +00:00
thorpej
1838aef29c
ac97.h -> ac97var.h
2000-05-15 01:27:44 +00:00
soren
8513bb93ed
Regen.
2000-05-14 14:58:14 +00:00
soren
b84dfa7c45
Add SGI IOC3.
2000-05-14 14:56:53 +00:00
jhawk
e0292df01c
sc_ih (interrupt cookie) is not pci-specific data
...
and needs to remain in fxp_softc rather than fxp_pci_softc;
otherwise we break cardbus.
2000-05-12 18:46:33 +00:00
thorpej
cd82969dfc
Print the revision info from the PCI configuration header. From
...
Dave Sainty, kern/10025.
2000-05-12 17:52:07 +00:00
thorpej
c8de5ae180
Treat the 3c980C-TXM like the 3c980 Server Adapter. From Paul J. Lavoie,
...
kern/10037.
2000-05-12 17:48:47 +00:00
thorpej
032c5f01de
Regen.
2000-05-12 17:47:05 +00:00
thorpej
0a712d4707
Add product ID for 3Com 3c980C-TXM 10/100 Ethernet. From Paul J. Lavoie,
...
kern/10037.
2000-05-12 17:46:47 +00:00
thorpej
288883fca7
Apply indent(1).
2000-05-12 16:42:41 +00:00
thorpej
6474f16852
Use ether_crc32_le().
2000-05-12 16:41:59 +00:00
jhawk
421c001447
Move struct fxp_pci_softc declaration to if_fxp_pci.c removing an
...
unnecessary header file (if_fxp_pcivar.h); oh, how quickly the nascent
inodes are subject to infant mortality.
2000-05-12 13:46:31 +00:00
jhawk
cd552bf956
Fix bugs seen on Sony Vaios.
...
Address kern/9370, kern/9548, kern/9571, and kern/9573.
Save and restore critical PCI configuration registers because they are
sometimes bashed.
Add a powerhook to restore said PCI registers after APM events.
The fxp now works across a warm boot from windows (vaio).
The fxp now works across an apm suspend/resume or hibernate/resume cycle.
2000-05-12 03:37:40 +00:00
jhawk
6622f20fc1
Move pci-specific data to fxp_pci_softc from fxp_pci_softc.
...
Add some more pci-specific data to fxp_pci_softc.
2000-05-12 03:36:18 +00:00
jhawk
8d671b6292
Define some PCI power management CSR constants.
2000-05-12 03:35:34 +00:00
thorpej
5786c811d5
Support 64-bit PCI memory mapping registers, as sometimes are used
...
on the Symbios 53c896 controller. Also, prefer memory space over
I/O space.
2000-05-10 17:22:46 +00:00
thorpej
90f7e687dc
These are no longer used.
2000-05-10 17:09:44 +00:00
thorpej
d56c0ff801
Support Adaptec U2W cards with a 64-bit PCI memory range (such cards
...
are available with Power Macintosh G3 and G4 systems).
2000-05-10 17:07:52 +00:00
thorpej
5939e70ca3
Add support for mapping 64-bit PCI memory space. If the region
...
is mapped in a way that is inaccessible by a 32-bit bus_addr_t, then
print a message to that effect and return failure.
Original patches by Bill Studenmund, with a few small changes by me.
2000-05-10 16:58:42 +00:00
kleink
7a6f003756
Add a comment describing the previous change.
2000-05-10 08:39:58 +00:00
haya
7d4bae615d
Move if_rl_pci.c:1.7 to if_rtk_pci.c.
2000-05-10 00:19:55 +00:00
bouyer
05e928a241
Ops, abort if we can't map the registers ! Pointed out by Matthias Drochner.
2000-05-09 17:05:52 +00:00
dante
2648a72bb2
Minor changes to PCI configuration
2000-05-08 17:11:54 +00:00
joda
6d3ce966ce
VIA VT82C686A hardware monitor
2000-05-08 16:40:42 +00:00
kleink
05f0b17555
Make pci_get_capability() work correctly on both header type 0 and type 2
...
devices; both have different Capability List Pointer registers.
2000-05-08 10:52:38 +00:00
kleink
085ec82073
Add a register offset for the Capability List Pointer in header type 2.
...
XXX Ideally the PCI-Cardbus Bridge header should be restructured to just
XXX present standard register definitions, making it ~safe to be included.
2000-05-08 10:45:52 +00:00
kleink
de328af944
Fix a inverted logic botch introduced in rev. 1.35, typically causing
...
cb_chipset() to return the wrong chipset type.
2000-05-08 07:31:20 +00:00
wiz
8651580247
man page is written, remove it from TODO
2000-05-07 20:47:10 +00:00
jonathan
8ee4c016eb
PCI product codes for Yamaha YMF744B (DS-1S) YMF754 (DS-1E) audio chips.
2000-05-07 17:00:06 +00:00
jonathan
0d57ac396d
Product codes for Yamaha YMF744B (DS-1S) YMF754 (DS-1E) audio chips.
2000-05-07 16:56:34 +00:00
veego
f7e2752025
Change one 0 for bootverbose to 1 if DEBUG is defined.
2000-05-07 14:59:23 +00:00
veego
20ae91400c
Add a dummy bootverbose.
2000-05-07 14:49:11 +00:00
veego
21942247f3
It is a bad idea to declare a static bootverbose variable here. Remove it.
2000-05-07 14:43:31 +00:00
wiz
4211fcfd7e
remove unnecessary output to console
2000-05-07 13:50:10 +00:00
wiz
7392f90215
multiple inclusion protection
2000-05-07 03:01:58 +00:00
wiz
3d3dc5c594
add one
2000-05-07 01:46:01 +00:00
wiz
2f7dba9ea1
compilation fix
2000-05-07 01:16:23 +00:00
wiz
4caea4817d
some glue for bktr-driver
2000-05-07 00:25:58 +00:00
wiz
5f8b869a3e
Some NetBSD specific changes; also TODO, and import script, based
...
on bind2netbsd by Bernd Ernesti
2000-05-07 00:24:33 +00:00
wiz
8b27ce1a70
Import of (finally busspaced) bktr-driver from FreeBSD (part 1).
...
This version is from the location specified in the README, modified
by bktr2netbsd, to be committed later.
2000-05-07 00:16:17 +00:00
soren
5e209d22f7
Print the usual interrupt line.
2000-05-06 00:46:19 +00:00
thorpej
5a5c88dc4e
`typedef void ifnet_ret_t;' isn't valid C -- use #define, instead. Also,
...
don't abuse the C preprocessor.
2000-05-03 21:08:02 +00:00
thorpej
081e7cbdaf
`typedef void ifnet_ret_t;' isn't valid C -- use #define, instead.
2000-05-03 20:52:29 +00:00
bouyer
3bb9a5f666
- do sync/wide negotiation
...
- use a circular queue for the start slots, so that order has better chances
to be preserved.
2000-05-02 19:03:02 +00:00
nathanw
8ca78ff825
In siop_lookup_product(), actually check the PCI *vendor* ID as well as the
...
product ID.
Prevents false matches of other devices, such as the DEC 21050 ppb.
2000-05-02 03:59:35 +00:00
augustss
4e1e58e353
Change the way the codec is access to mimic how Linux&FreeBSD does it.
2000-05-01 17:15:41 +00:00
tsutsui
9498452c05
- Move some initialization into MI rl_attach() from each bus attachment.
...
- Use proper CARDBUS_* macro in if_rl_cardbus.c
- Use product ID read from PCI configuration space rather than from EEPROM
in if_rl_pci.c.
Patch sent from Masanori Kanaoka <kanaoka@ann.hi-ho.ne.jp> and
some cosmetic changes by me.
2000-05-01 15:08:50 +00:00
augustss
fec9706315
Remove unneeded #include "mpu.h"
2000-04-30 22:16:56 +00:00
augustss
aaa405eab7
Add driver for C-Media CMI8x38 Audio Chip. From Takuya SHIOZAKI <AoiMoe@imou.to>
2000-04-30 21:59:58 +00:00
dante
1dbea6c0f9
Add new microcode for all of the supported boards.
...
Fix minor glitches.
Add preliminary support for ASB-3940U3W host adapters; it might work w/ autotermination on.
ASB-3940U3W support is not yet tested due to lack of board.
2000-04-30 18:52:14 +00:00
dante
ff84aeb762
Add ASB-3940U3W host adapters (AdvanSys)
2000-04-30 18:46:18 +00:00
dante
d2679acf60
Add ASB-3940U3W host adpeter (AdvanSys)
2000-04-30 18:34:53 +00:00
tsutsui
439b360ab9
Modify EEPROM read functions and handle also 9356 EEPROM.
...
Fixes kern/9861.
2000-04-30 12:00:40 +00:00
augustss
d2e2dce826
Regen.
2000-04-28 20:54:39 +00:00
augustss
0b9c397110
Add 2 more eap audio devices.
2000-04-28 20:54:10 +00:00
uch
bbb8c56fcb
add PCI_MAPREG_PPB_END (PCI-PCI bridge) PCI_MAPREG_PCB_END (PCI-Cardbus bridge)
2000-04-28 17:12:45 +00:00
augustss
30c20f930f
Change my email address.
2000-04-27 15:26:44 +00:00
bouyer
bf7a94ec2b
Fix copyrigth notice.
2000-04-27 14:06:57 +00:00
thorpej
ef25b7769e
Regen.
2000-04-26 17:30:59 +00:00
thorpej
0defe75e76
Add product ID for the PLX Technology 9060ES PCI bus controller. Note this
...
ID isn't normally seen, as just about every device with a PLX on it loads
a different ID from an EEPROM, but there's no harm in documenting it.
2000-04-26 17:30:35 +00:00
tsutsui
b4f524c223
- Allocate mbuf dynamically on Tx and use bus_dmamap_load_mbuf(9).
...
- Call bus_dmamap_sync(9) as appropriate.
- Leave only register declarations in rtl81x9reg.h and
split other stuff into rtl81x9var.h.
bus_dma(9) code mostly taken from thorpej's if_rtp.c.
2000-04-26 14:02:34 +00:00
tsutsui
6369b56c99
Fix two endian problems. rtk now works on macppc.
...
- Use le32toh() on reading rxstat from the Rx DMA buffer.
- rl_read_eeprom() should return EEPROM values in little endian
when caller requires byte-stream data.
bus_dma(9) fixes are still on-going.
XXX rtk on macppc seems to make tons of CRC errors...
XXX Does it work fine on i386 or others?
2000-04-25 14:16:46 +00:00
augustss
74beeca710
Move the size of the mapped bus_space region into the bus independent softc.
2000-04-25 09:20:54 +00:00
augustss
aae26d0d0c
Move a test if the MIDI is open outside a loop in the interrupt routine.
...
Some stylistic changes.
2000-04-24 17:55:24 +00:00
tsutsui
6f9392b42a
Merge changes of sys/pci/if_rl.c rev. 1.8->1.10. (from kern/9870)
...
Also remove unused pbase, vbase and PCI_CAP_PWRMGMT declarations.
2000-04-24 15:25:00 +00:00
augustss
5ea1af4bf4
Regen.
2000-04-22 18:07:19 +00:00
augustss
f468f877de
Add some CMedia audio devices. From T.SHIOZAKI <AoiMoe@imou.to>
2000-04-22 17:32:02 +00:00
bouyer
19ada4a82a
Snapshot of work in progress: new driver for the NCR 53c8xx SCSI controller
...
(the name 'siop' is still being discussed, may change).
Only basic disconnect/reselect for now, no sync/wide negotiation.
Tested with 810A, 875 and 895 on i386 only.
The bus-independant part should also be able to handle the 53c720 and 53c770.
A new driver with enhanced script should appear for the 825/875/895 'soon'.
2000-04-21 17:56:58 +00:00
nathanw
3e49436f9d
Replace rcons console code with rasops console code.
...
Console text should now be supported on all TGA cards;
8- and 32-bit TGA and 8-bit TGA2 have been tested.
Implement accelerated character drawing, scrolling, and clearing.
Stop clearing "odd" in VHCR; it's unnecessary and hurts performance.
Use bus_space_vaddr() instead of a local hack.
2000-04-20 05:25:20 +00:00
haya
784977f319
Changes the name of RealTek driver. The new name is `rtk'. This used
...
to be called `rl' and it conflict with RL vax disks, canonical and
historical unix driver name.
This changes are minimal: it only changes the name of RealTek driver.
The filename of source code and a lot of the letter `rl' in source
files should be changed shortly.
2000-04-19 08:44:31 +00:00
bouyer
5803932005
Regen
2000-04-19 07:52:33 +00:00
bouyer
01beba012a
Add some Symbios devices.
2000-04-19 07:51:20 +00:00
cgd
0d117aa518
regen for changed pcidevs
2000-04-18 16:38:12 +00:00
cgd
88e62f7c84
SiByte, Inc. is vendor 0x166d.
2000-04-18 16:37:00 +00:00
cgd
a267efd061
#if 0 the (way bogus) PCI_CLASS_COMMUNICATIONS/PCI_SUBCLASS_BRIDGE_PCI (!!!)
...
match pointed out (again?) by Johan Danielsson, after i repeatedly told
him not to do something similar in com_cardbus.
2000-04-17 16:45:04 +00:00
thorpej
d8bccc7c6e
Regen.
2000-04-17 00:26:45 +00:00
thorpej
fcd420cf5d
Add product ID for the S3 Trio3D/2X AGP graphics adapter.
2000-04-17 00:26:22 +00:00
haya
e49807d100
Incorporate the changes of RL81x9 driver provided by M. Kanaoka
...
<kanaoka@ann.hi-ho.ne.jp>. He separated the driver into IC specific
portion and bus attachment portion and added cardbus attachent.
2000-04-10 07:42:55 +00:00
tsutsui
909b096cf8
Remove #ifdef __NetBSD__ code inside !__NetBSD__ part.
2000-04-08 13:49:43 +00:00
tsutsui
de19673726
Add vaddr_t cast to vtophys() arg. (for powerpc)
2000-04-08 13:44:12 +00:00
tsarna
9964217571
Fix fms_free like auvia_free
2000-04-08 03:50:48 +00:00
tsarna
a1ea15c0e1
Fix auvia_free, clean up more on close, and be more careful in interrupt
...
handler.
2000-04-08 03:33:58 +00:00
tsutsui
cae6a3d2a4
Fix bogus byte-swap code in ncr_snooptest().
...
XXX This snoop test is not needed if ncr had real bus_dma(9) support...
2000-04-06 14:42:06 +00:00
haya
7bc5a1ca36
Add CardBus interrupt enable flag. When this flag is asserted, a
...
CardBus interrupt is routed to the child devices and vice versa. This
flag is negated when a pccbb receives a suspend or stanby event.
2000-04-06 09:11:57 +00:00
mrg
710872c1d0
add "hme at pci" support.
2000-04-05 02:31:19 +00:00
thorpej
5a41b5bf56
- if_tlp_cardbus.c: Use the `pmreg' pointer passed by by
...
cardbus_get_capability() [mirror change already made to if_tlp_pci.c]
- if_tlp_cardbus.c: If we don't find an ISV SROM, try to grab the
Ethernet address from the CIS.
- if_tlp_cardbus.c: set CardBus cards to store-and-forward mode from
the get-go.
- Put the TxThresh tables in tulipvar.h, and use them in the CardBus
and PCI front-ends to go to store-and-forward mode.
- Document the Xircom X3201-3 clone a little more.
2000-04-04 19:22:50 +00:00
joda
d3b06b0596
regen
2000-04-03 15:05:05 +00:00
joda
0caed62b03
add some NVIDIA chipsets
2000-04-03 15:04:42 +00:00
nathanw
f5b5bbbf21
Add code to read and write bt463-style ramdacs; pick ramdac interface
...
functions based on type returned from tga_getconf().
Adapt to change in ramdac interface.
Fix race condition in tga_sched_update().
Make tga_sched_update() work before interrupts are enabled.
2000-04-02 19:01:11 +00:00
nathanw
bc3260fcb0
Restore ramdac-type field to TGA configuration structure.
2000-04-02 18:59:32 +00:00
nathanw
c0a4c9e67d
Move bt463 code to dev/ic and adapt to the new ramdac interface.
...
Set default window type to 24-bit truecolor.
Correctly set pseudocolor mode.
2000-04-02 18:57:36 +00:00
bouyer
26f6c9a9cf
- DMA code cleanup: pciide_dma_finish() doesn't stop/unload the current DMA op
...
if an IRQ was not detected, unless the force flag was given. Use this to
detect if the IRQ was for us (closer to shared IRQ for controllers which
don't have their own IRQ handler in pciide.c) and to poll for DMA xfer.
Also makes the timeout recovery code simpler.
- ATAPI cleanup: don't call controller-specific functions from atapiconf.c
(wdc_*), so that it's possible to attach an atapibus to something else
than a wdc/pciide (Hi Lennart :).
Overload struct scsi_adapter with struct atapi_adapter, defined
as struct scsi_adapter + atapi-specific callbacks. scsipi_link still points
to an scsi_adapter, atapi code casts it to atapi_adapter if needed.
Move atapi_softc to atapiconf.h so that it can be used by the underlying
controller code (e.g. atapi_wdc.c).
Add an atapi-specific callback *atapi_probedev(), which probe a drive
in a controller-specific way, allocate the sc_link and fills in the
ataparams if needed. It then calls atapi_probedev() (from atapiconf.c)
to do the generic initialisations and attach the device.
- While I'm there merge and centralise the state definitions in atavar.h.
It should now be possible to use a common ata/atapi routine to set the
drive's modes (will do later).
2000-04-01 14:32:22 +00:00
tsarna
07dea214dc
Add auvia, a driver for the integrated AC'97 audio on the VIA VT82C686A
...
southbridge.
Tested on a ASUS K7M (w/ AD1881 codec). Please report any problems.
2000-03-31 04:45:28 +00:00
joda
4772fa5b3c
regen
2000-03-30 17:35:39 +00:00
joda
4c8aed5893
add the device id for the VIA 686A modem controller, continuing the
...
trend of mislabelling VIA's south bridges
2000-03-30 17:34:53 +00:00
augustss
169ac5b3c1
Remove register declarations.
2000-03-30 12:41:09 +00:00
ad
2030c2a75a
Regen.
2000-03-27 16:56:27 +00:00
ad
9bdb74bc42
Add a couple of DPT devices.
2000-03-27 16:55:43 +00:00
soren
7b737d77b3
For Cobalt Networks 21143's, always use store-and-forward and toggle
...
a GPIO line to fully reset the PHY.
2000-03-26 10:53:39 +00:00
mycroft
d07e505604
Rather than guessing at the location of the PMCSR, use the pointer returned by
...
pci_get_capability(). (This is, after all, a standardized interface...)
2000-03-23 22:23:03 +00:00
joda
8ff53e0069
regen
2000-03-23 15:11:26 +00:00
joda
f68049679a
add two Intel 82810E devices (from IWAMOTO Toshihiro)
2000-03-23 15:10:56 +00:00
ad
5cc8601c8f
Identify individual models correctly.
2000-03-23 11:33:35 +00:00
ad
90ae76da4b
Regen.
2000-03-23 11:18:09 +00:00
ad
96ec85342f
Back out rev 1.197.
2000-03-23 11:17:32 +00:00
thorpej
fc96443d15
New callout mechanism with two major improvements over the old
...
timeout()/untimeout() API:
- Clients supply callout handle storage, thus eliminating problems of
resource allocation.
- Insertion and removal of callouts is constant time, important as
this facility is used quite a lot in the kernel.
The old timeout()/untimeout() API has been removed from the kernel.
2000-03-23 07:01:25 +00:00
ws
7da71e5f9e
Make IPKDB working again.
...
Add support for i386 debugging and pci-based ne2000 boards.
2000-03-22 20:58:25 +00:00
kleink
c8b75dd368
Scale the drain timeout for allowing auto-initialize DMA to complete.
2000-03-22 14:37:43 +00:00
haya
ddd36bd41a
1. Do not apply 5 V on a CardBus card.
...
2. Do not avoid ISA hole when a device requires more than
256-byte io space.
3. Remove sending CardBus bridge's function number to
cardbus stack. This number is not needed for anyone.
2000-03-22 09:35:06 +00:00
cgd
00f7a2d476
if the PCI_CONFIG_DUMP option is defined, set the patchable
...
pci_config_dump variable to 1. otherwise, it gets set to 0. If
that's set, when configuring PCI devices spew the very verbose
configuration space header dump that was previously "#if 0"'d.
If you use this option, or patch the variable to 1, it's strongly
encouraged that you have used the MSGBUFSIZE option to enlarge the
kernel message buffer.
2000-03-22 00:47:26 +00:00
cgd
9c93a8b8ff
add PCI_CONFIG_DUMP as a defopted option
2000-03-22 00:43:47 +00:00
cgd
7990787b1b
opt_pciverbose.h -> opt_pci.h (it's gonna be used by more things, soon)
2000-03-22 00:36:29 +00:00
joda
1e0edbf862
regen
2000-03-21 18:51:43 +00:00
joda
1173b4b28d
add two VIA VT8371 devices
2000-03-21 18:51:08 +00:00
ad
95a8d1bfcd
Try to use memory mapped I/O on everything but the SMART-2/E.
2000-03-21 13:45:16 +00:00
tsutsui
979d79d931
Use sc_cfg4 for the Am53c974.
2000-03-20 05:48:28 +00:00
soren
2d937cc876
Make it a bit more clear which functions are specific to which models.
...
Split off register definitions into eapreg.h.
Remove duplicate codec reset.
2000-03-19 17:11:50 +00:00
cgd
638726b0db
* rework the quirk table ('device_tab'):
...
* QUIRK_NOMSG only has any meaning when NCR_GETCC_WITHMSG
is defined. Therefore, there's no harm in using it when
NCR_GETCC_WITHMSG is not defined. so, simplify the table
by removing the #ifdef.
* there's really no point in having table entries after
an entry which will match everything.
* add some comments, clean up spacing.
* add an entry for "QUANTUM"/"ATLAS IV" drives with flags
QUIRK_NOTAGS|QUIRK_NOMSG. (I included the latter flag only
because everything else had it before! ... which means that
all the functionality added with the NCR_GETCC_WITHMSG define
would never get used! *sigh*) The latter fixes the problems
I was having on an Atlas, and should fix the problems mentioned
by Hans Hoppe <hopha@casema.net> in comments on PR#7694.
2000-03-18 06:59:02 +00:00
cgd
52b7212c58
undo the non-script changes from rev 1.87. They caused problems in
...
1.4.x and i have concerns (but no concrete proof) they will cause/have caused
problems in -current as well. Really, the right way to fix this is to
rewrite the driver, and push up tagged queueing handling into a common
middle layer that'll do it right in a low-level-driver-independent manner.
I'll fix my particular issues by using the ncr driver quirk mechanism.
2000-03-18 06:47:28 +00:00
soren
bd1cc85c63
Use a kvtophys() hack for mips like for alpha. No idea if it actually works..
2000-03-17 11:30:14 +00:00
bouyer
5c0cae7a28
Fix botched merge in previous.
2000-03-17 09:25:22 +00:00
bouyer
0bf221f2d9
- remove leftovers of FreeBSD code in #if 0/#endif
...
- fix a bug in ti_encap() where a NULL pointer could be used if we run out
of tx descriptors (return ENOMEM instead, and let the caller assert OACTIVE)
- sync boot messages with NetBSD's pci standart (print ti_name and irq
line)
- add a shutdown hook to stop the board, so that the board will not DMA at
random places while we're rebooting
- convert all but TIGON 1 transmit descriptors to use bus_space
(this last one isn't trivial to get rigth and I don't have the hardware to
test)
- If we can't map the mem space linar, retry to map it nolinear. Punt if
we couldn't map the mem space linear and we found a Tigon 1 chip.
With these changes a Tigon 2 board (netgear BA620 at last) can be used in
my DS20.
2000-03-17 09:20:16 +00:00
thorpej
93eb82ff2f
Recognize the Intel InBusiness.
2000-03-16 23:41:40 +00:00
thorpej
56460ec830
Regen.
2000-03-16 23:41:30 +00:00
thorpej
3f182de5c6
Add product ID for the Intel InBusiness 10/100 Ethernet adapter (which
...
is an i82559 with a different product ID).
2000-03-16 23:36:44 +00:00
ad
70063dc527
Driver for Compaq array controllers and disks (cac(4)/ca(4)).
2000-03-16 14:52:22 +00:00
fvdl
1a774a9979
Set bus_intr to ahc_pci_intr.
2000-03-16 10:34:33 +00:00
thorpej
c38405d33d
Add power management support to the `tlp' driver. The battery on my
...
laptop lasts a whole lot longer now.
2000-03-15 18:39:50 +00:00
fvdl
14620f1eee
PCI frontend for new ahc driver.
2000-03-15 02:33:52 +00:00
haya
b6f22443bb
Remove ancient code.
2000-03-15 00:38:40 +00:00
enami
60ed7cfb2b
Simplify the code a bit.
2000-03-14 10:26:10 +00:00
enami
70b8e188ee
Don't think that a card is inserted if there is a card already in the slot.
...
Note that powerdown hook calls pccbbintr so that it detect card insertion or
removal during suspension.
2000-03-14 10:23:16 +00:00
enami
d454505125
Cosmetic change.
2000-03-14 10:20:09 +00:00
tsarna
e58bd0c365
Regen
2000-03-14 01:46:56 +00:00
tsarna
67027b1103
Add product ids for some VIA Technologies VT82C686A southbridge devices.
2000-03-14 01:45:11 +00:00
enami
b3cf850817
Fix typos in comments.
2000-03-14 01:29:30 +00:00
ad
f91ce51084
Regen.
2000-03-13 17:24:14 +00:00
ad
e22c4b3d1f
Add a bunch of Compaq array controllers.
2000-03-13 17:23:26 +00:00
mycroft
e750135b5e
A few things:
...
* Initialize PCIC_INTR and PCIC_CSC_INTR on all chips, not just TI.
* Leave card detect interrupts enabled in PCIC_CSC_INTR. (This requires
reading PCIC_CSC in the interrupt handler on some chips, so do that too.)
* Leave PCIC_INTR_ENABLE set, as some chips require this to post card detect
interrupts while in PCMCIA mode.
* Leave PCIC_INTR_RESET (which is inverted) set at all times *except* when
powering up a socket, as some chips will use it to drive RESET# low even
while a CardBus card is in the slot.
This makes PCMCIA and CardBus cards works with some TI chips. Cross-checked
with a Toshiba ToPIC 95B.
2000-03-12 11:31:53 +00:00
drochner
30f73f1831
support bus probes a la "badaddr" and VME interrupts, fix error handling
...
after mapping problems
2000-03-12 11:23:06 +00:00
drochner
e135f943fa
add support for DMA mapping, bus probes ala "badaddr" and VME interrupts,
...
improve diagnostic output
2000-03-12 11:21:02 +00:00
nathanw
1203bdcbb3
Bus_space-ify TGA register accesses.
...
(raster operations are still using pointer-based access)
2000-03-12 05:32:29 +00:00
mycroft
602faa83a8
Do *not* fiddle with the serial/parallel IRQ mode selection on TI chips.
...
Without extensive probing, we cannot possibly know that we're doing the right
thing.
Also some stylistic changes.
2000-03-12 04:34:29 +00:00
mycroft
781b535703
Revert the previous change.
2000-03-12 04:27:12 +00:00
mycroft
c7a13f6116
Revert the previous change. It does not match the commit message *and* was
...
incomplete (and probably quite broken).
2000-03-12 04:25:57 +00:00
thorpej
5c64f2064d
Add missing sc_pil_intr_enable member to pccbb_softc.
...
XXX Double check this, please. The code appears to only use it as a
boolean, but...
2000-03-12 01:15:04 +00:00
jdolecek
27fe6c0aee
regen
2000-03-11 16:13:39 +00:00
jdolecek
d01b78affd
Add id for Alliance AT25, as sent by Dave Sainty in kern/9596.
2000-03-11 16:13:14 +00:00
soren
2d525b16dd
The shortened 1371 reset delay in revision 1.32 doesn't seem to be
...
quite enough for my 1373, so increase it some.
2000-03-11 06:42:37 +00:00
bouyer
b58bf3c7bb
Don't reset cp->hw_ok ro 0 when cp isn't initialised in cy693_chip_map()
...
(used only in failure case). Pointed out by Wolfgang Solfrank.
While I'm here correct indentation.
2000-03-10 21:21:48 +00:00
haya
173f823e3a
Only apply power on 3.3 V CardBus card (there are no 5 V CardBus card.)
2000-03-10 11:08:49 +00:00
soren
c70220f2a2
Move PCIIDE_CHANNEL_NAME macro to pciidereg.h.
2000-03-09 20:26:31 +00:00
drochner
0542cec055
put "#ifdef __alpha__" around "alpha_mb()" calls
...
(I know the driver is useless without console initialisation, but it
should at least compile.)
2000-03-09 18:40:36 +00:00
jdolecek
24ea2caf14
regen
2000-03-09 09:53:03 +00:00
jdolecek
3abb87c0f5
Add Conexant SoftK56 PCI Software Modem, Sony CXD3222 OHCI i.LINK(IEEE 1394)
...
PCI controller, Sony Memory Stick I/F Controller
Ids send by John Hawkinson in kern/9588
2000-03-09 09:50:49 +00:00
mycroft
5eee9ca94c
Determine the size of the SROM by probing the chip using the standard Microwire
...
protocol. Eliminates the need for srom_quirks and some other trash.
2000-03-07 00:39:17 +00:00
thorpej
91c44a72b8
Set ifp->if_baudrate as appropriate.
2000-03-06 21:02:37 +00:00
thorpej
a6f861574a
No longer necessary to futz with ifp->if_baudrate here.
2000-03-06 21:02:00 +00:00
bouyer
c34cce88c4
Add support for the AMD 756 DMA/UDMA IDE controller, provided in
...
PR kern/9536 by Dave Sainty.
2000-03-06 18:02:26 +00:00
perry
d97becf28e
Make Creative Soundblaster PCI 128's work -- from Masahiro Ishiyama
...
Note that on device close, there's a sharp pop that probably should be fixed.
Note also that the device is hanging the machine at times for brief
periods inside audio.c::audiogetinfo(), but I haven't yet figured out
why.
2000-03-06 03:18:11 +00:00
mark
c74ea28746
Support the W89C940F alternative ID.
2000-03-06 03:07:08 +00:00
mark
9e870c5a88
Regenerate from pcidevs.
2000-03-06 02:32:31 +00:00
mark
1a0eab6fa3
Add SYMPHONY 83C553 PCI-ISA bridge.
...
Add alternative ID for Winbond W89C940F.
2000-03-06 02:31:19 +00:00
elric
23af6e53fd
Moved things around a bit so that TGA2 can be used as a console.
...
Addresses PR: port-alpha/9542
2000-03-05 07:57:52 +00:00
elric
1dfdd10eae
I got the mode sense bits of the monitor wrong they needed a twiddle (~).
2000-03-05 02:30:57 +00:00
tron
c98328e9df
Regen from "pcidevs".
2000-03-04 13:24:24 +00:00
tron
947ec630de
Add AMD Athlon chipset related devices. Patch supplied by Dave Sainty in
...
PR kern/9533.
2000-03-04 13:23:26 +00:00
elric
f939818426
Added basic TGA2 support to the TGA driver. Abstracted the RAMDAC
...
code out into ../ic/bt485.c. Disabled tga_bt463.c, which we don't
currently support.
2000-03-04 10:27:59 +00:00
thorpej
285a315e99
Simplify the winlist code.
2000-03-01 23:40:26 +00:00
drochner
7da6407d04
add (minimal, PIO only) support for the popular "Tundra Universe"
...
PCI-VME interface chip and a frontend for the "Bit3 Mod. 2706"
PCI-VME adapter
2000-02-25 18:22:39 +00:00
ad
c86b7572f9
Cosmetic change.
2000-02-25 00:23:57 +00:00
itohy
5ed29fa2d6
Delete a superfluous newline in attach message.
2000-02-24 03:42:44 +00:00
fair
7f8cdf038f
Fix a missing closing parenthesis in an error diagnostic
2000-02-23 08:31:25 +00:00
haya
d94804a788
Pccbb maintains the interrupt handlers for 16-bit PC Cards
...
by itself.
Add some comments.
2000-02-23 07:28:54 +00:00
enami
347823e807
Include dev/isa/isavar.h so that this file compiles again.
2000-02-22 22:46:16 +00:00
thorpej
3f9cf7572c
Don't use void * for chipset tags. Bad hacker, no biscuit.
2000-02-22 16:04:44 +00:00
enami
b785bb47a0
Establish a powerhook and make sure the card detect interrupt is enabled
...
after resume from suspend, as i82365.c does.
This is a workaround for newer Sony VAIO notebook.
Patch is submitted by Atsushi Onoe (onoe@sm.sony.co.jp ) in PR#9463.
2000-02-22 02:35:26 +00:00
thorpej
70bbb1b84e
Sync PCMCIA memory mapping with a change from rev 1.47 of i82365.c:
...
always map attr memory 8 bit, since its defined that way. (chopps)
2000-02-21 01:44:36 +00:00
sommerfeld
3a76270201
deal with a DELAY vs. delay issue
2000-02-20 22:19:29 +00:00
mjacob
717d5b1cc3
Support for > 12 byte commands for parallel SCSI.
2000-02-19 01:54:42 +00:00
soren
4331d2bcaa
Regen.
2000-02-16 04:29:32 +00:00
soren
021ff75015
Add Toshiba ISA bridge.
2000-02-16 04:29:20 +00:00
mjacob
6eba47aa8f
add (untested in NetBSD yet) Qlogic 12160 (Ultra3) suppot
2000-02-12 02:22:37 +00:00
bouyer
f522d6f1ee
Supports "USR 3CP5609 PCI 16550 Modem", from Kent Polk.
2000-02-08 16:26:23 +00:00
bouyer
b3cffb232f
regen
2000-02-08 16:24:00 +00:00
bouyer
b614c6a569
Add US Robotics vendor ID, and USR 3CP5609 PCI 16550 Modem product ID.
...
From Kent Polk.
2000-02-08 16:22:37 +00:00
cgd
dbeafc9dbe
clean up some printfs
2000-02-06 08:14:13 +00:00
chopps
6d8c9583a7
indent this file
2000-02-05 18:42:37 +00:00
chopps
101848d272
run this through indent with some comment cleanup -- more knfing needed.
2000-02-05 18:20:08 +00:00
dante
29be498635
Add a list of all the currently supported boards
2000-02-04 13:16:22 +00:00
dante
cbacaf54d7
Add AdvanSys U2W (LVD) boards support
2000-02-03 20:28:26 +00:00
dante
fd2fd888ef
Add AdvanSys U2W host adapters
2000-02-03 16:56:23 +00:00
dante
787999d9e4
Add AdvanSys U2W boards
2000-02-03 16:51:42 +00:00
joda
5b67628108
regen
2000-02-03 13:58:55 +00:00
joda
1533d39d9e
2 Micro -> O2 Micro
2000-02-03 13:58:28 +00:00
thorpej
eed75dbc26
Don't dry to diving MIIF_NOISOLATE in the PHY drivers. Instead, pass
...
flags down from the parent to child vi mii_attach().
2000-02-02 17:09:38 +00:00
thorpej
84dc99fdea
Bring some order to the chaos which was the MII code function naming
...
"conventions".
2000-02-02 08:05:26 +00:00