- video base register value brings different scanline starting address
of framebuffer depending on VRAM chip column size.
many other issues left unsolved.
- text rendered in incorrect colours.
- acceleration codes should be reimplemented from scratch.
than the preivous code. It can show readable characters on screen.
Tested only with 32bpp model of PMAGD opion card. Need more work for 8bpp.
- 2D accelleration will be revamped to ultilize SFBplus features.
- there seems much mulfunctionness in 32bpp codes of /sys/dev/rasops/.
Need to rectify every corners.
at tcds in files.alpha for now, and add a new `xasc at tcds' to files.pmax.
after pmax has moved fully to MI scsi (and `asc' is MI scsi), we should move
the device asc, etc., lines to files.tc.
an unaligned buffer. The last word of the buffer was not getting flushed
if the buffer was unaligned and fit in a single DMA segment. Now dump(8)
works on both MIPS1 and MIPS3 DECstations.
and the buffer is not 8-byte aligned, it leaves a partial transfer in the
SDRx registers. This could cause data corruption in dump(8) because the
read-ahead buffers are allocated on a non-aligned address. When the read
DMA transfer is interrupted and the current DMA position is not aligned,
call the dma_end() routine to flush the SDRx register contents to the
buffer.
stored in device softc. rasops_cmap[] array is orginazed in 256
iteration of 3 byte long RBG triplet, which does not match with
struct wsdisplay_cmap design.
Drochner's work made in nisimura-pmax-wscons branch. Still a little
to do before useful for DECstation. MI softintr required.
- allow wildcard matchs to have zstty/zskbd/zsms in default hardware
configuration.
- abandon to check zs_ioasic_cnattach() return value; it doesn't fail.
- have zs_ioasic_cnattach() serial line parameters hardcoded inside, in
symmetry with zs_ioasic_lk201_cnattach().
unaligned transfers and adjust the physical address to align the transfer.
If the buffer end just crossed the page boundary, the computation of the
NEXTPTR physical address resulted in using -1. The cleanup at the end of
the DMA transfer would try to copy the residual data to physical address
0x1ffffffc. This would silently corrupt data on the R3000 and usually
would hang the R4000.
different than on the DECstation).
- Use IOASIC_DMA_BLOCKSIZE instead of PAGE_SIZE.
Should make this work on the Alpha. From discussion with
Izumi Tsutsui, Gregory McGarry, and Chris Demetriou, and
much reading of EK-D3SYS-PM.
device and the id string is not found in option ROM string, but
ULTRIX/OSF1 call it so anyway.
- Squash IOASIC DMA buffer allocation into device attach() sequence.
ad