150286 Commits

Author SHA1 Message Date
bjh21
1323fd42da This file isn't used any more. 2006-08-31 23:16:28 +00:00
freza
fd156a0bc9 * move the "cheating" conditional into unmapiodev() implementation
itself (instead of memio_unmap()), as it differs between OEA and
  ibm4xx.

OK by matt@
2006-08-31 23:14:38 +00:00
freza
8f274ce5a8 * implement unmapiodev(), make mapiodev() aware of ppc4xx_tlb_mapiodev()
* we now don't rely on having console linear-mapped (that was terribly
  broken, really)
* also, this can be used as generic ibm4xx mapiodev()/unmapiodev()

OK by matt@
2006-08-31 22:53:40 +00:00
hubertf
3a3624455e Sync behaviour of sh and ksh dotfiles for new users with those of root.
Addresses PR 32215 by Wouter Schoot
2006-08-31 22:49:55 +00:00
he
0b5587a884 Provide a dummy default for NBPG after including <sys/param.h> to deal
with a build problem for sparc.  The reason is that <dev/tc/sticio.h>
(yes, irrelevant for sparc...) wants NBPG declared, but for sparc user-land
that symbol is not available since sun4/sun4c/sun4m do not all share the
same page size.
2006-08-31 22:41:14 +00:00
hubertf
d0b2986f47 Sync order with src/etc/skel/dot.cshrc, no functional change. 2006-08-31 22:33:14 +00:00
rpaulo
481ac4be37 Change PROG to xcvs and PROGNAME to cvs.
Builds xcvs binary but installs using cvs filename.

Another fix for case-insensitive file systems, approved by Christos.
2006-08-31 22:31:45 +00:00
he
276f9c838b Add one more conflicting ioctl set: CLOCKCTL_ADJTIME / TCTRL_MODEM_PWR,
(partially) fixes build problem for sparc.
2006-08-31 22:25:34 +00:00
freza
ca97defaa7 * ppc4xx_tlb_reserve(): allocate "reserved" TLB entries dynamically
* ppc4xx_tlb_mapiodev(): resolve pa to va from reserved TLB entries

OK by matt@

XXX we'll keep TLB_NRESERVED defined until we fix explora to use new API
2006-08-31 22:13:51 +00:00
reinoud
037fe176f0 Add shortcut for struct long_ad 's Unique ID hint that covers the lower 32
bits of the targeted files 64 bits Unique ID for recovery purposes.
2006-08-31 21:38:14 +00:00
reinoud
0b228f5987 Fix panic on reading/writing to a (raw) CD device and encountering an
error. It now correctly sets bp->b_resid to the full size of the buffer.
The failed SCSI read/write command allways contains the complete buffer.

When encountering a read (or write) error, the scsipi stack sets the
xs->resid to zero since the command has been accepted by the drive. The
scsi command set does not allow a partial read or write to be performed and
will signal a success or an error.
2006-08-31 21:32:42 +00:00
freza
60d1041835 * add PVR values for Xilinx 405 cores
* don't try to decode vendor-specific PVR, print raw value instead.
* panic() if we see cache wasn't probed, we'd crash later anyway.
* rework the way PVR gets translated to core name.
* while there, normalize printf format ("%s: ...", device_xname(self), ...).

OK by matt@
2006-08-31 21:32:27 +00:00
bjh21
bc3d7ff3c7 My version of scsidm (1.03) seems to section a disk by making a FileCore
file system that covers the whole disk but marking most of it in use somehow.
Make this easier to deal with by detecting an existing RISC iX partition and
displaying its starting cylinder.

This program should really go away and its job be done by sysinst and/or
disklabel, but not today.
2006-08-31 20:59:24 +00:00
reinoud
e3b1c755c2 Remove two spurious empty lines in functions 2006-08-31 20:22:34 +00:00
rpaulo
1399def216 Rename TEST/test.c to avoid problems when doing a cleandir on case-insensitive
file systems.
ok'ed christos.
2006-08-31 20:20:38 +00:00
reinoud
055cdf5d13 Fix fencing bug on CD disk size; the comment was wrong, its the *length* of
the device and since we count from zero its equal to the number of sectors
and thus one higher than the last sector.

This fixes the read/write problems on the (raw) device where the last
sector was not readable/writable.
2006-08-31 19:46:54 +00:00
dyoung
8cd106d3d2 Per discussion on tech-kern and tech-userlevel, move the bit-twiddling
macros, __BIT, __BITS, SHIFTIN, SHIFTOUT, and __arraycount() from
lib/libkern/libkern.h to sys/cdefs.h.  Add a __-prefix to SHIFTIN
and SHIFTOUT, and add a manual page for the bit-twiddling macros,
bits(3).

Make the __BIT and __BITS macros "widthless," as best I can, by
changing their type to uintmax_t from uint32_t.  XXX The manual
page lags this change by a bit.

Define __PRIxBIT and __PRIxBITS printf(3) format strings.
2006-08-31 19:24:37 +00:00
tsutsui
a714ccc7c2 volatile void func(decl) -> void func(decl) __attribute__((__noreturn__)) 2006-08-31 19:23:44 +00:00
matt
3d36667ef9 Appease GCC4 by making /* NOTREACHED */ code return 0. 2006-08-31 18:31:59 +00:00
matt
77ef4246de Call unmapiodev when unmapping bus_space to possibly reclaim the VA. 2006-08-31 18:28:47 +00:00
matt
3d324b035e Add unmapiodev(vaddr_t, vsize_t) (to be used by bus_space_unmap) 2006-08-31 18:23:40 +00:00
matt
25159b5f42 Add unmapiodev. 2006-08-31 18:18:17 +00:00
matt
6a157410d2 Increase SYMTAB_SPACE 2006-08-31 18:12:42 +00:00
dogcow
5d399ea343 process_stoptrace is also used by PTRACE; fixes INSTALL_SMALL, GENERIC_TINY,
et al, where KTRACE isn't defined but PTRACE is.
2006-08-31 18:05:21 +00:00
matt
00185e0248 Make these compile again. (#include <arm/ep93xx/epgpioreg.h> and
do the proc -> lwp changeover).
2006-08-31 17:53:19 +00:00
dyoung
7ad81e35ff Remove an extraneous line that snuck into my previous commit. 2006-08-31 17:49:12 +00:00
dyoung
47be766fd3 Add a mode to gre(4) that sends GRE tunnel packets in UDP datagrams.
Fix MOBILE encapsulation.  Add many debugging printfs (mainly
concerning UDP mode).  Clean up the gre(4) code a bit.  Add the
capability to setup UDP tunnels to ifconfig.  Update documentation.

In UDP mode, gre(4) puts a GRE header onto transmitted packets,
and hands them to a UDP socket for transmission.  That is, the
encapsulation looks like this: IP+UDP+GRE+encapsulated packet.

There are two ways to set up a UDP tunnel.  One way is to tell the
source and destination IP+port to gre(4), and let gre(4) create
the socket.  The other way to create a UDP tunnel is for userland
to "delegate" a UDP socket to the kernel.
2006-08-31 17:46:16 +00:00
matt
d2fa9e5329 Make cpu_coredump dependent on COREDUMP 2006-08-31 16:49:21 +00:00
matt
34827b737d More PTRACE fallout. 2006-08-31 16:39:13 +00:00
he
3e73ce6bef Protect the include of "opt_ptrace.h" by _KERNEL_OPT. 2006-08-31 15:01:56 +00:00
tron
595808ad47 Don't build "linux_ptrace.c" anymore. ptrace(2) support is optional now
and we can't tell for the LKM whether the kernel supports it or not.
2006-08-31 14:00:29 +00:00
tron
3a715a0a6f Don't build "freebsd_ptrace.c" anymore. ptrace(2) support is optional now
and we can't tell for the LKM whether the kernel supports it or not.
2006-08-31 13:25:50 +00:00
gson
d9fde78727 In -i mode, flush standard output after each line. This is needed to
make the output appear in a timely fashion when redirected to a file
or pipe.
2006-08-31 10:25:04 +00:00
he
29c0c094cc Add linking against -lutil to pick up estrdup(). Fixes evbsh5 build. 2006-08-31 07:18:39 +00:00
matt
5322f324e6 Make this console now that vconsole is done and with GCC4. 2006-08-31 05:11:07 +00:00
xtraeme
6b60608a48 Execute k8_powernow_init() if it's a K8 CPU and is able to change FID/VID
(previously the test was always false).

POWERNOW_K8 now runs in 32-bit mode with amd64 CPUs.
2006-08-31 04:20:21 +00:00
oki
a7e68afd48 Regen (for PTRACE). 2006-08-31 00:23:11 +00:00
oki
a978ade516 Update for options PTRACE. 2006-08-31 00:21:09 +00:00
rumble
8b5466f087 Describe the GIO Product Identification Word and add a few macros to
extract other fields.
2006-08-31 00:01:10 +00:00
rumble
c693018067 Add the giopci device and associated ethernet/mii chipsets for the Phobos
and Set Engineering GIO fast ethernet boards.
2006-08-30 23:59:50 +00:00
rumble
ba52409a2e Provide a pseudo-pci bus for the following PCI ethernet boards, which live
behind custom PCI<->GIO bridges:
	- Set Engineering GIO Fast Ethernet (TI ThunderLAN)
	- Phobos G100 (DEC 21140?)
	- Phobos G130 (DEC 21143)
	- Phobos G160 (DEC 21143)

All boards present the chipsets' pci configuration registers at some
defined offset in their slots' address space as well as device registers.
We simply allow the MI pci subsystem to attach the devices.

This has been tested with a G130 board (DEC 21143) and works well on IP20
and IP24. The Set Engineering board attaches, works fine when receiving and
lightly transmitting, but chokes for unknown reasons on heavy transmits.
The tl(4) driver may need some fixing.
2006-08-30 23:58:13 +00:00
rumble
2d1cbf7222 Implement the gio_arb_config() interface for changing the machine-specific
gio bus arbiter parameters via imc(4) or pic(4).

Slots are identified by name: GIO_SLOT_GFX, GIO_SLOT_EXP1, GIO_SLOT_EXP2.

Provide some helper functions for establishing interrupts associated with
each slot and obtaining product descriptions.
2006-08-30 23:48:55 +00:00
rumble
a4d0bfd738 Add pic and imc-specific functions to alter the GIO bus arbiter
configuration. These are to be used exclusively by a higher interface in
gio/gio.c.

Also add functions to enable, disable and query the state of SysAd bus
parity detection since certain gio(4) cards need to be able to disable
it in order to work around their own buggy implementations.
2006-08-30 23:44:52 +00:00
rumble
aa71bc7886 Generalise pci/pci_machdep.c further and move all mace-specific code into
mace/pci_mace.c in preparation for pci devices on the gio(4) bus.
2006-08-30 23:35:10 +00:00
rumble
cc8a477ce5 Add quirks for the Phobos GIO Fast Ethernet boards. 2006-08-30 23:32:07 +00:00
rpaulo
7fc9ea7cd6 postfix 2.3.3 was imported some days ago 2006-08-30 23:31:53 +00:00
rumble
e980865174 Phobos boards (my G130 at least) have a non-standard srom layout. Try to
identify it and pull out the enaddr.
2006-08-30 23:31:08 +00:00
rumble
75e28cc7ed Make this compile again when TLDEBUG is defined. 2006-08-30 23:29:01 +00:00
he
061f5e8762 Add handling of two more pairs of duplicate ioctl values: amiga's
and x68k's PARIOC[SG]PARAM reuse the ioctl values from sbus/mbppio.h's
MBPPIOC[SG]PARAM.

Suggested by Christos.
2006-08-30 23:26:25 +00:00
he
30ef9162ed Regen (for PTRACE). 2006-08-30 23:00:45 +00:00