mycroft
a4fcbe857d
Don't loop if we're out of CCBs/SCBs/MSCPs.
1995-07-28 22:49:56 +00:00
mycroft
38036ed16e
Fix an oversight in the previous.
1995-07-27 05:01:08 +00:00
mycroft
c9f7b2a185
Add PCI-specific configuration for PCnet-PCI.
1995-07-27 04:39:05 +00:00
mycroft
7ba8b413d9
Disable diagnostics related to expected mbi race condition.
1995-07-27 01:00:11 +00:00
mycroft
e8c91e1129
Fix typos.
1995-07-25 05:11:11 +00:00
mycroft
e413887539
Update to use dev/ic/am7990.c.
1995-07-24 18:04:21 +00:00
cgd
830a91b2e9
update SCSI minphys routines' definitions to match standard minphys()
...
definition and usage.
1995-07-24 07:16:44 +00:00
cgd
a696e525b7
fix function prototypes, usages, to match what the code actually does
1995-07-24 05:54:52 +00:00
mycroft
bdb9d41d7e
Fix thinko in packet size diagnostic.
1995-07-24 04:12:45 +00:00
mycroft
2d37aba592
Add missing `break;'.
1995-07-24 02:46:47 +00:00
mycroft
ff82158c19
Fix typo.
1995-07-24 02:43:11 +00:00
mycroft
4f36e42ff4
Various cleanup:
...
* Use standard function naming conventions.
* Only increment if_ipackets when a packet was actually received.
* Check for excessively large or small packets before trying to read them.
1995-07-24 02:40:38 +00:00
mycroft
413a5efc0c
Pass a softc to leget(), not an ifnet.
1995-07-24 02:29:59 +00:00
mycroft
33292f0f88
Fix typos.
1995-07-24 02:08:13 +00:00
mycroft
7998e5ab4c
Various cleanup:
...
* Use standard function naming conventions.
* Only increment if_ipackets when a packet was actually received.
* Check for excessively large or small packets before trying to read them.
1995-07-24 02:02:45 +00:00
mycroft
b5699db68d
Rename new xmit_busy back to txb_inuse.
1995-07-23 23:42:47 +00:00
mycroft
799910cb2c
Remove txb_inuse. Other stylistic changes.
1995-07-23 22:12:16 +00:00
mycroft
1df91e03ca
Remove a noop clearing of IFF_OACTIVE.
1995-07-23 22:09:11 +00:00
mycroft
1199b1b042
Exchange xmit_free for xmit_busy. Add BPF hook to iestart().
1995-07-23 22:02:20 +00:00
mycroft
317db86dd3
Stylistic changes.
1995-07-23 21:37:51 +00:00
mycroft
9b2ae2a3cd
Stylistic changes.
1995-07-23 21:26:48 +00:00
mycroft
4da9a5f814
Stylistic changes.
1995-07-23 21:14:31 +00:00
mycroft
644935b313
Slight rearrangement. Also, force eg_incount to 0 after a reset.
1995-07-23 20:54:23 +00:00
mycroft
ecf259e342
Call epmbufempty() any time the board is stopped.
1995-07-23 20:46:49 +00:00
mycroft
57528ce346
Init functions are always called at splimp().
1995-07-23 20:36:51 +00:00
mycroft
6bc1cc31f8
Push the copying of the output buffer further down, with the intent of
...
eliminating it and outputting the mbufs directly. Make sure the queue drains
even if packets are not failing to transmit.
1995-07-23 20:27:48 +00:00
mycroft
a8ce47fa44
Remove extra spls in el_init().
1995-07-23 20:11:55 +00:00
mycroft
90da0e3a99
Kill return values in egstart().
1995-07-23 19:45:42 +00:00
mycroft
3d1d0d928b
Update prototypes.
1995-07-23 17:57:39 +00:00
mycroft
a16702ce45
Various:
...
* Fix ugly looping constructs.
* Add a missing splx().
* Eliminate sc_pktbuf.
1995-07-23 17:50:56 +00:00
mycroft
8593f3a607
Recode elread() and elget() like other drivers.
1995-07-23 17:05:26 +00:00
mycroft
a1a31f853c
Fix pasto.
1995-07-23 16:43:40 +00:00
mycroft
9c26c4da18
Always use m_pkthdr.len on output. Panic if M_PKTHDR is not set.
1995-07-23 16:42:49 +00:00
mycroft
465cfd15f0
Always use m_pkthdr.len on output. Panic if M_PKTHDR is not set.
1995-07-23 16:32:33 +00:00
brezak
693043d786
GUS audio driver from John Kohl.
1995-07-19 19:58:09 +00:00
cgd
880567e771
fix from Onno van der Linden for large-file read timeouts on double-speed
...
drives. A different read command must be used on double-speed drives.
It boggles my mind that people could design hardware this stupid.
1995-07-10 01:27:24 +00:00
cgd
e574814605
insert missing call to splx() when {aha,bt}_send_mbo() returns null.
...
from enami@sys.ptg.sony.co.jp .
1995-07-08 00:34:16 +00:00
brezak
4b4b3ee81a
Cleanup
1995-07-07 02:19:48 +00:00
brezak
dd3d2e28ed
Setup irq correctly (PR#1179)
1995-07-07 02:15:12 +00:00
brezak
0bdd4aa7c2
add support for cs4231
1995-07-07 02:11:45 +00:00
mycroft
9624704e02
Make each disk and tape driver define its own read and write functions.
...
Deprecate rawread() and rawwrite() completely. Remove d_strategy from cdevsw to
force the abstraction barrier.
1995-07-05 02:32:53 +00:00
mycroft
7263209ce6
Make each disk and tape driver define its own read and write functions.
...
Deprecate rawread() and rawwrite() completely. Remove d_strategy from cdevsw to
force the abstraction barrier.
1995-07-04 07:15:28 +00:00
mycroft
eb99dcc09a
Fix a condition where ttywait() wouldn't be woken up. Also, short-circuit
...
the case of no pending input in compoll().
1995-07-04 06:47:18 +00:00
cgd
2b71eae2c7
note that most of dev/ic's contents have changed names
1995-06-28 04:30:30 +00:00
cgd
bc9de32349
make dump stubs consistent
1995-06-26 05:34:44 +00:00
cgd
2a8d6461a8
implement new-style block device dump routine if __BDEVSW_DUMP_OLD_TYPE
...
not defined, otherwise use an "not implemented" stub.
1995-06-26 05:16:55 +00:00
cgd
7491d6cbe5
if subdevices specified with wildcarded unit number, config_attach()
...
can change the cf_unit, so save it before attach and use saved value.
1995-06-26 04:08:04 +00:00
mycroft
d9fc8ef092
Remove check for if_addrlist == 0; if_attach() always puts one address on
...
the list, so this is a noop.
1995-06-12 00:09:42 +00:00
mycroft
e6c81430d2
Add missing `break;'s.
1995-06-09 18:09:27 +00:00
cgd
da5b5dfa63
make match/attach routines and cfdriver struct mi
1995-06-07 06:46:04 +00:00
cgd
5a29222f9c
prototype isascan, spacing
1995-06-07 06:45:44 +00:00
mycroft
4bfd7749ad
Various:
...
* Check for CTS in the correct register.
* Only do a selwakeup() if we output something.
* Don't make assumptions about what TTYDISC does.
1995-06-05 19:08:09 +00:00
mycroft
5b37a8fded
Handle BREAK correctly when not entering DDB.
1995-06-04 20:50:14 +00:00
mycroft
38847d04c0
Add an input FIFO, and fix several flow control problems. Based on code from
...
Felix A. Croes.
1995-06-04 20:39:22 +00:00
jtc
d045544ebd
Changed ns82450 to ns8250 and dropped ns82550 from probe console messages.
1995-06-01 21:26:51 +00:00
mycroft
488bc82ac3
Fix multicast filter calculation.
1995-05-28 11:29:46 +00:00
mycroft
addaff473b
Only use the `no pending interrupt' bit in the IIR; the other bits
...
are too unreliable on clone chips.
1995-05-28 03:26:37 +00:00
cgd
3ebc44f6e1
isa softc structs are larger than 'struct device'
1995-05-17 02:07:03 +00:00
cgd
c821cb684a
(1) conditionalize debugger usage in comeint with DDB, not COMCONSOLE;
...
latter would lead to undefined symbols if DDB not defined.
(2) check for break on console, and therefore debugger entry (if ddb
in kernel) earlier, so that the device doesn't need to be open.
(3) return immediately after breaking into the debugger in comeint().
(4) only do the normal character input routine in comintr if receive
mask yeilds _EXACLTY_ LSR_RXRDY. if there's only a receive
error, or there's a receive error _and_ a received character,
do comeint().
(former two by me. latter two from Bob Baron <rvb@cs.cmu.edu>.)
1995-05-12 17:54:41 +00:00
mycroft
8742c18c06
Update for slightly modified ARP handling.
1995-05-10 14:04:14 +00:00
brezak
c68110e043
Remove strings
1995-05-08 22:01:34 +00:00
brezak
05f27a97ce
Fix holes in device index space. PR#1028
1995-05-08 17:28:51 +00:00
cgd
1e0c08b206
uncomment cy driver spec; i386 conf.c needs the header file.
1995-05-03 17:09:28 +00:00
mycroft
825d2fee22
Add Masahiro SEKIGUCHI's MB8696[05] driver, ported, with some additional
...
changes by me:
* Make autoconfiguration work correctly for more models of AT1700.
* Make the debugging code more robust and complete.
* Tweak the output routine for better performance, and to eliminate an ugly
kluge.
Various other style cleanup. Needs more work.
1995-05-01 02:47:07 +00:00
mycroft
03e77f5565
Tweak the output routine for slightly better performance.
1995-05-01 02:39:30 +00:00
hpeyerl
c9319ad5c4
<break> --> ddb if defined(comconsole).
...
(if you have a serial console and you hit break, you get ddb).
1995-04-28 00:34:08 +00:00
hpeyerl
686da9ddb7
copyright foo.
1995-04-27 14:50:58 +00:00
mycroft
6bb0f284d0
Turn off some debugging code by default.
1995-04-27 01:46:47 +00:00
brezak
1f4378da60
Fix nits from Mike Long <mike.long@analog.com> PR#996
1995-04-26 21:45:57 +00:00
mycroft
cb856a9a4d
Watchdog now takes an int, not a short.
1995-04-19 22:42:51 +00:00
mycroft
9e28a35469
Fix thinko in previous change.
1995-04-19 22:04:33 +00:00
mycroft
53d73c77a5
Garbage collect #includes.
1995-04-19 19:10:35 +00:00
mycroft
4c28b7cb87
Change needs-count' to
needs-flag'.
1995-04-19 19:02:54 +00:00
mycroft
e1315808a7
Implement comtty().
1995-04-19 18:59:27 +00:00
mycroft
496acd4619
Correct a couple of things, and add a `fe' device.
1995-04-19 02:11:10 +00:00
mycroft
800b1f371a
Fix obvious bug in reading from SB_MIC_PORT.
1995-04-17 23:48:06 +00:00
cgd
15552a0e17
if_le conflicts with the Alpha; move description back to i386
1995-04-17 20:23:32 +00:00
cgd
af67271a66
try to actually (gasp!) describe the drivers.
1995-04-17 17:54:15 +00:00
cgd
d61eaf6f6d
ISA config.new files description.
1995-04-17 16:58:30 +00:00
cgd
982230db44
update for new locations
1995-04-17 15:48:20 +00:00
cgd
8a640328ed
clean up several ISA device interfaces: autoconfiguration, header
...
inclusion, and interrupt configuration. more work still needs to be done,
but it's getting better...
1995-04-17 12:06:30 +00:00
mycroft
04e937dcbd
Don't boundary check I/O to the `raw' partition.
1995-04-15 05:01:26 +00:00
mycroft
c7a7d5c262
Sync with the rest of the world.
1995-04-11 05:10:20 +00:00
mycroft
8d8af964a7
Move NIC register definitions to a global location.
1995-04-11 04:45:26 +00:00
mycroft
b703c76655
Update for if.h. Define helper macros for accessing NIC registers. Optimize
...
edrint() a little more.
1995-04-11 04:38:42 +00:00
mycroft
70839d3b04
Change start and watchdog return values to void.
1995-04-10 18:21:42 +00:00
mycroft
68c8c80929
kernel_pmap --> pmap_kernel()
1995-04-10 16:48:27 +00:00
mycroft
e25c1817cf
kernel_pmap --> pmap_kernel()
1995-04-10 13:08:28 +00:00
mycroft
95c5c4f79f
Most of the console functions return void. Also change interrupt logic
...
slightly.
1995-04-10 01:05:55 +00:00
mycroft
87d43afd46
Clean up to match common code, and fix a typo.
1995-04-07 22:27:42 +00:00
mycroft
0e67f2a78e
Rename a few constants to match the chip documentation.
1995-04-04 01:59:28 +00:00
mycroft
13ac06ec6a
More debugging printf()s, from Rafal Boni.
1995-04-04 01:44:23 +00:00
mycroft
c04ae31e95
Prototype iexmit().
1995-04-03 21:22:37 +00:00
mycroft
9085715229
Some pseudo-random cleanup, and try to start transmitting packets quicker.
1995-04-03 21:17:13 +00:00
mycroft
7e2dabf972
Add a missing unlock.
1995-04-01 10:29:41 +00:00
mycroft
508897dfcc
Insert a missing unlock.
1995-04-01 10:27:56 +00:00
mycroft
03e3548ec7
Change the locking protocol to match other drivers.
1995-04-01 08:45:33 +00:00
mycroft
5ef3b8b957
Always load the TOC. Turn off the TOC bit in the mode register so the busy
...
light goes off.
1995-04-01 08:40:11 +00:00
mycroft
e17c63cee6
Revamp the locking mechanism slightly. Update some outdated comments, and add
...
a few new ones.
1995-03-29 23:36:27 +00:00
briggs
0884490297
KERNEL -> _KERNEL.
1995-03-29 21:56:46 +00:00