NetBSD/sys/dev/isa
1995-07-23 17:05:26 +00:00
..
ad1848.c add support for cs4231 1995-07-07 02:11:45 +00:00
ad1848var.h add support for cs4231 1995-07-07 02:11:45 +00:00
aha1542.c insert missing call to splx() when {aha,bt}_send_mbo() returns null. 1995-07-08 00:34:16 +00:00
aic6360.c clean up several ISA device interfaces: autoconfiguration, header 1995-04-17 12:06:30 +00:00
ast.c if subdevices specified with wildcarded unit number, config_attach() 1995-06-26 04:08:04 +00:00
boca.c if subdevices specified with wildcarded unit number, config_attach() 1995-06-26 04:08:04 +00:00
bt742a.c insert missing call to splx() when {aha,bt}_send_mbo() returns null. 1995-07-08 00:34:16 +00:00
com.c Fix a condition where ttywait() wouldn't be woken up. Also, short-circuit 1995-07-04 06:47:18 +00:00
comreg.h note that most of dev/ic's contents have changed names 1995-06-28 04:30:30 +00:00
cs4231var.h add support for cs4231 1995-07-07 02:11:45 +00:00
cy.c note that most of dev/ic's contents have changed names 1995-06-28 04:30:30 +00:00
elink.c lip service to making ISA support machine-independent. This is the first 1995-01-29 07:36:54 +00:00
elink.h new RCS ID format. 1994-10-27 04:14:23 +00:00
files.isa GUS audio driver from John Kohl. 1995-07-19 19:58:09 +00:00
gus.c GUS audio driver from John Kohl. 1995-07-19 19:58:09 +00:00
gusreg.h GUS audio driver from John Kohl. 1995-07-19 19:58:09 +00:00
ics2101.c GUS audio driver from John Kohl. 1995-07-19 19:58:09 +00:00
ics2101var.h GUS audio driver from John Kohl. 1995-07-19 19:58:09 +00:00
if_ate.c Always use m_pkthdr.len on output. Panic if M_PKTHDR is not set. 1995-07-23 16:32:33 +00:00
if_ed.c Always use m_pkthdr.len on output. Panic if M_PKTHDR is not set. 1995-07-23 16:32:33 +00:00
if_edreg.h Move NIC register definitions to a global location. 1995-04-11 04:45:26 +00:00
if_eg.c Remove check for if_addrlist == 0; if_attach() always puts one address on 1995-06-12 00:09:42 +00:00
if_egreg.h new RCS ID format. 1994-10-27 04:14:23 +00:00
if_el.c Recode elread() and elget() like other drivers. 1995-07-23 17:05:26 +00:00
if_elreg.h new RCS ID format. 1994-10-27 04:14:23 +00:00
if_ep.c Fix pasto. 1995-07-23 16:43:40 +00:00
if_epreg.h copyright foo. 1995-04-27 14:50:58 +00:00
if_fe.c Always use m_pkthdr.len on output. Panic if M_PKTHDR is not set. 1995-07-23 16:32:33 +00:00
if_fereg.h Add Masahiro SEKIGUCHI's MB8696[05] driver, ported, with some additional 1995-05-01 02:47:07 +00:00
if_fmv.c Always use m_pkthdr.len on output. Panic if M_PKTHDR is not set. 1995-07-23 16:32:33 +00:00
if_hp.c clean up several ISA device interfaces: autoconfiguration, header 1995-04-17 12:06:30 +00:00
if_ie507.h Various changes from Rafal Boni to improve performance and reliability. Also, 1995-01-23 04:50:08 +00:00
if_ie.c note that most of dev/ic's contents have changed names 1995-06-28 04:30:30 +00:00
if_ieatt.h new RCS ID format. 1994-10-27 04:14:23 +00:00
if_le.c Remove check for if_addrlist == 0; if_attach() always puts one address on 1995-06-12 00:09:42 +00:00
if_lereg.h new RCS ID format. 1994-10-27 04:14:23 +00:00
isa.c make match/attach routines and cfdriver struct mi 1995-06-07 06:46:04 +00:00
isadma.c clean up several ISA device interfaces: autoconfiguration, header 1995-04-17 12:06:30 +00:00
isadmareg.h note that most of dev/ic's contents have changed names 1995-06-28 04:30:30 +00:00
isadmavar.h new RCS ID format. 1994-10-27 04:14:23 +00:00
isareg.h clean up several ISA device interfaces: autoconfiguration, header 1995-04-17 12:06:30 +00:00
isavar.h prototype isascan, spacing 1995-06-07 06:45:44 +00:00
lpt_isa.c clean up several ISA device interfaces: autoconfiguration, header 1995-04-17 12:06:30 +00:00
lpt.c clean up several ISA device interfaces: autoconfiguration, header 1995-04-17 12:06:30 +00:00
lptreg.h new RCS ID format. 1994-10-27 04:14:23 +00:00
mcd.c fix from Onno van der Linden for large-file read timeouts on double-speed 1995-07-10 01:27:24 +00:00
mcdreg.h fix from Onno van der Linden for large-file read timeouts on double-speed 1995-07-10 01:27:24 +00:00
pas.c GUS audio driver from John Kohl. 1995-07-19 19:58:09 +00:00
pasreg.h Add support for PAS 16 basic 1995-03-15 18:45:58 +00:00
pss.c Cleanup 1995-07-07 02:19:48 +00:00
pssreg.h Remove strings 1995-05-08 22:01:34 +00:00
README.seagate Commit this, though it really does need work. 1994-11-03 16:55:57 +00:00
rtfps.c if subdevices specified with wildcarded unit number, config_attach() 1995-06-26 04:08:04 +00:00
sb.c GUS audio driver from John Kohl. 1995-07-19 19:58:09 +00:00
sbdsp.c GUS audio driver from John Kohl. 1995-07-19 19:58:09 +00:00
sbdspvar.h Remove strings 1995-05-08 22:01:34 +00:00
sbreg.h Remove strings 1995-05-08 22:01:34 +00:00
seagate.c clean up several ISA device interfaces: autoconfiguration, header 1995-04-17 12:06:30 +00:00
ultra14f.c clean up several ISA device interfaces: autoconfiguration, header 1995-04-17 12:06:30 +00:00
wd7000.c clean up several ISA device interfaces: autoconfiguration, header 1995-04-17 12:06:30 +00:00
wd.c Make each disk and tape driver define its own read and write functions. 1995-07-04 07:15:28 +00:00
wdreg.h KERNEL -> _KERNEL. 1995-03-29 21:56:46 +00:00
wss.c Setup irq correctly (PR#1179) 1995-07-07 02:15:12 +00:00
wssreg.h Setup irq correctly (PR#1179) 1995-07-07 02:15:12 +00:00
wt.c Make each disk and tape driver define its own read and write functions. 1995-07-04 07:15:28 +00:00
wtreg.h new RCS ID format. 1994-10-27 04:14:23 +00:00

The hardware:

The ST01/02, and Future Domain 950 are very simple SCSI controllers. They are
not busmastering, so the processor must do all transfers a la IDE. They support
blind transfer by adding wait states (up to a certain limit). Interrupt is
generated for reconnect and parity errors (maybe also for some other events).

The card consists of one command port that writes to scsi control lines, reads
status lines, and a data port that read/writes to the 8 data lines. The address
decoding gives both data and control ports large memory areas to a single
port. This is used by the code.

The ST01/02 differs from the FD950 in memory address location and SCSI id.

Probing for the card:

A card is recognized by comparing the BIOS signature with known signatures. A
new card may not be recognized if the BIOS signature has changed. Please send
new signatures to me.

Driver function:

A scsi command is sent to scsi_cmd function. The command is either placed in
the queue or an retryable message is returned. The routine may wait for
completion of the command depending on the supplied flags. A timer is started
for every command placed in the queue. The commands are added in the order they
are received. There is a possiblity to make all REQUEST SENSE commands be
queued before all other commands, but I dont think it is a good thing (Linux
do however use this). 

The card is mostly controlled by the sea_main function. It is called by
scsi_cmd, the interrupt routine, and the timeout routine. The sea_main routine
runs as long there are something to do (transfer data, issue queued commands,
and handle reconnected commands).

The data transfers may be done in two different ways: Blind and polled
transfers. They differ in the way the driver does it handshaking with the
target. During a blind transfer, the driver code blindly transfers a block
of data without checking for changed phase. During polled transfers, the
phase is checked between every character transfered. The polled transfers
are always used for status information and command transfers.

Because the card does not use dma in any way, there is no need to handle
physical addresses. There is no problem with the isa-bus address limit of
16MB, making bounce-buffers unnecessary.

The data structures:

Every card has a sea_softc structure keeping the queues of commands waiting to
be issued, and commands currently disconnected. The type of card (Seagate or
Future Domain), data and control port addresses, scsi id, busy flags for all
possible targets, and interrupt vector for the card.

Every scsi command to be issued are stored in a sea_scb structure. It contains
a flag describing status/error of the command, current data buffer position,
and number of bytes remaining to be transfered.


PROBLEMS

I have had problems getting the ST02 boot using the boot floppies. I think it
is some problem with BIOS calls not working. It is unfortunately impossible to
disconnect the ST02 floppy controller.

I have had problem to get the driver talk to a 40 MB Seagate disk. I dont have
access to it any more, so I can't do any more checks on that.

NOTE: The ST02 creates its own description of the disk attached. This is not
the same as the disk says. This translation problem may cause problems when
sharing a disk between both DOS and BSD. It is however not impossible.