3e4a358e28
Patch from Thomas Eberhardt to make PCnet-32 chips work.
1994-12-12 04:39:52 +00:00
303841c92e
3c509 fixes to avoid adapter getting stuck in high traffic conditions.
...
I don't particularly like the fixes, but at least now the 3c509 never
gets stuck. On the other hand, performance still sucks in some cases.
1994-12-10 14:52:02 +00:00
793e542f89
Fix format of attach message.
1994-12-10 05:55:26 +00:00
211b002017
Ignore ERR during diagnostics.
1994-12-01 10:45:26 +00:00
867ebf1d84
Clear the controller active flag after a timeout.
1994-11-30 02:32:03 +00:00
5584ff927f
Don't stall the queue on CHECK SENSE if we get a reselect while selecting.
1994-11-30 02:08:01 +00:00
639a64de08
Fix a null pointer reference.
1994-11-29 21:35:13 +00:00
51bed8d804
Add an assertion mechanism to check for more abnormal conditions.
1994-11-29 21:29:56 +00:00
58cb5339d6
For consistency...
1994-11-29 20:57:28 +00:00
41b26a6dfd
Handle BUS FREE phase a little differently, to get better error detection. Other
...
cleanup.
1994-11-29 20:08:27 +00:00
bb90feebac
Disable debugging breakpoints by default.
1994-11-29 17:56:49 +00:00
5ac2484d95
* Redo most of the message and phase state machines. Multiple pending
...
message outs should now work correctly (including retransmissions).
Multiple messages ins should be more efficient. Missing REQ after
reselection phase should now (correctly) cause a wait with ENREQINIT
set.
* Abstract out the reselection out sequence, and use it directly to
get sense info. (This is somewhat faster than the generic done/sched
sequence.)
* If there are no ACBs available, wait interruptibly for one.
* Leave the interrupt registers alone during message in/out; just
watch for phase change. Don't (incorrectly) reenable interrupts
during data in/out; defer that to aicintr().
* Handle command pointer per SCSI 2 spec.
* Other minor coding improvements.
1994-11-29 17:50:39 +00:00
6a2c060851
fix unary plus typo :-)
1994-11-25 23:19:03 +00:00
cba32aa25f
Minor update for new autoconfig.
1994-11-25 08:17:21 +00:00
0649f37219
Officially credit Onno.
1994-11-23 22:00:08 +00:00
2058abab15
Forgot to commit this as part of the LBA changes.
1994-11-23 07:56:52 +00:00
cc44b4600c
There's no point in bothering to unlock what we didn't lock.
1994-11-23 07:54:15 +00:00
6dda55519e
Fix an outdated comment.
1994-11-23 03:11:01 +00:00
a3fc466734
Use logical block addressing if available. Be a little more careful about
...
maintaining timeouts. Clean up wddump() a bit.
1994-11-23 01:35:43 +00:00
525fc36e19
Implement 32-bit reads and writes, but for now assume 16-bit mode.
1994-11-22 10:20:16 +00:00
3a99ddf172
Add a missing newline in some error messages.
1994-11-22 09:36:56 +00:00
db3bde9525
Implement EIDE multi-sector PIO and DMA modes, based on code from Onno van
...
der Linden. Also, various structural cleanup, and fix two bogons that crept
in, and remove all of the old clustering nonsense.
1994-11-22 09:33:59 +00:00
1e01855683
Minor fix to debugging code.
1994-11-22 05:50:48 +00:00
85826f0fbe
Fudge a couple more fields for ancient disks.
1994-11-22 05:39:16 +00:00
e1a7bac628
Change some constant names, etc., to better match the ATA spec.
1994-11-22 05:34:49 +00:00
95edd299b0
Add still more locking.
1994-11-22 03:23:49 +00:00
5bd4115690
Add some missing locking, and some general cleanup.
1994-11-20 22:36:43 +00:00
9a3840f2f0
Stylistic changes.
1994-11-18 22:25:12 +00:00
61800cfa25
Convert port, IRQ, and DRQ numbers to ints.
1994-11-18 22:07:32 +00:00
35cdd801e6
Convert port, IRQ, and DRQ numbers to ints.
1994-11-18 21:57:40 +00:00
a2727ec558
Check IRQ 9, not IRQ 2.
1994-11-15 00:00:24 +00:00
b341f7a8c0
Map IRQ 2 to IRQ 9.
1994-11-14 23:58:56 +00:00
21e911d911
Update for new autoconfig.
1994-11-07 09:03:48 +00:00
2a9b6f7959
Fix stupid bug in last change.
1994-11-04 23:30:15 +00:00
4ec6774e12
Add a simplified version of wdcommand() that can be used in some cases.
...
Avoid needing a wd_softc inside wdprobe().
1994-11-04 23:18:06 +00:00
3df6bf0c0e
Trivial stylistic changes.
1994-11-04 21:32:23 +00:00
854d8d96dc
Rearrange slightly.
1994-11-04 19:25:34 +00:00
cfc4633919
Remove outdated comment.
1994-11-04 19:17:47 +00:00
b7acf321cd
No longer needs icu.h.
1994-11-04 18:59:34 +00:00
29414c5a0a
Change all of the uses of IRQ{0-15} and bit masks to use plain numbers
...
rather than bit shifting.
1994-11-04 18:34:50 +00:00
9af4fee97d
Use kvtop() rather than address arithmetic in a couple of places.
1994-11-04 08:55:53 +00:00
1948fcb3fa
Add a new function config_scan(), which just calls a particular function
...
with each plausibly cfdata, ignoring the priority mechanism completely.
1994-11-04 06:40:11 +00:00
2e8ae560f6
Commit incest with the config system for this one specific case.
1994-11-04 03:57:32 +00:00
fa769b0e97
Set ia_irq correctly.
1994-11-04 02:55:32 +00:00
7773b21b74
Correct an oversight.
1994-11-04 00:53:06 +00:00
d4dd538296
Oops; forgot isacd.
1994-11-04 00:07:39 +00:00
3fca7e771a
New version using standard config_*() functions.
1994-11-03 23:53:19 +00:00
ebbdd6473b
Update to match autoconfig code.
1994-11-03 23:26:03 +00:00
19fc9d55c8
*intr() arg does not need to be void*.
1994-11-03 23:23:38 +00:00
d0163400d1
Update to match autoconfig code.
1994-11-03 23:21:24 +00:00
54cc63645d
Update to match autoconfig code.
1994-11-03 23:08:27 +00:00
d23d1e83dc
Use indirect config for subdevices, and add dkdrivers where missing.
1994-11-03 22:55:58 +00:00
283745574f
Commit this, though it really does need work.
1994-11-03 16:55:57 +00:00
6ac2bbfc35
be more careful with types, also pull in headers where necessary.
1994-10-30 21:43:03 +00:00
9769a6a6f7
Various:
...
* Forget all cached info when opening a new disc.
* If the disc is removed, flush the buffer queue rather than stalling it.
* Set the default label after getting the disc size, and fill in the info
for RAW_PART also.
* Change another use of the unit number to a softc pointer.
* Use a dkdevice to hold the label and open partition masks.
* Force the partition offset to 0 for RAW_PART, regardless of the label.
* Nuke MCDPHYS() and MCDREADRAW; they had a silly bug that caused the code
to not work, and they aren't useful anyway.
Some other minor cleanup.
1994-10-28 23:39:59 +00:00
022ee8f7fe
new RCS ID format.
1994-10-27 04:14:23 +00:00
556a119342
Implement *cnpollc().
1994-10-26 18:06:30 +00:00
260ddbefb7
Rearrange ed_init() slightly, to better correspond to the National manual.
...
Optimize ed_rint() slightly in the case of multiple packets. (Avoid an outb
and an inb for each packet).
1994-10-23 23:24:56 +00:00
603fe7b5a6
Slight optimization.
1994-10-23 21:38:00 +00:00
0114159848
Fix the packet length correction for buggy chips so that it actually works,
...
and always use it (otherwise short packets could still be corrupted). Also
produce a diagnostic message if DIAGNOSTIC, since it *is* a hardware bug.
Add an ED_PAGE_SHIFT constant, and use it, to avoid GCC doing horrendous
things with divides and multiplies.
1994-10-23 21:22:13 +00:00
3e30a415ae
Be careful not to stack multiple timeouts.
1994-10-20 19:22:01 +00:00
4d072c5435
Remove the local timeout mechanism, and just use explicit timeout()/untimeout()
...
calls.
1994-10-20 18:37:45 +00:00
c11a06cbc2
Always set d_secsize to 512 for now.
1994-10-20 17:03:09 +00:00
0862d07daf
Don't switch to single-sector mode just because we got a corrected error.
1994-10-20 16:36:21 +00:00
d4153fff4d
Rearrange wdcstart() in a more logical fashion, and eliminate many redundant
...
calculations. Also, speed up bad block searching a little.
1994-10-20 16:19:08 +00:00
cd66683989
openpart -> openmask
1994-10-20 14:08:07 +00:00
cae71ba91d
Various changes:
...
* Add a dkdevice; move sc_*openpart, sc_label, and sc_cpulabel into it.
* Turn sc_wlabel into a flag, and don't set it automatically in DIOCWLABEL.
* If there is no label, disallow all I/O except to the raw partition.
* Don't allow I/O to `unused' partitions.
* Beginnings of support for block sizes other than 512 bytes.
Other minor changes.
1994-10-20 13:44:46 +00:00
8ae8b4ab29
Bug fixes from Rafal Boni:
...
* Set promiscuous mode flag before configuring card, so it actually works.
* Handle failed TDR commands correctly.
* Remove some apparently defunct and bogus code.
(This driver needs more work.)
1994-10-18 13:40:30 +00:00
320359f8e2
change, requested by Jarle Greipsland
1994-10-17 00:08:29 +00:00
49c34d3337
move arch dependence to archs. clean up a bit. deal with weird MAXPARTITONS.
1994-10-14 18:26:22 +00:00
6f5794ecba
Fix bugs in dealing with odd-length mbufs in ed_pio_write_mbufs(). From
...
John Hood.
1994-10-14 13:05:13 +00:00
7c01f7ce51
Changes from DG to deal with some old chips that corrupt the packet length.
1994-10-12 13:42:00 +00:00
4252ca6644
Correct multicast filter calculation.
1994-10-09 21:19:04 +00:00
236f105ccd
Remove unneeded #includes.
1994-10-09 15:06:23 +00:00
b90985ee3d
Don't poll the BUSY bit until the SDH register is set.
1994-10-07 11:34:52 +00:00
1eaa03e7dc
Fix initial allocation of dev array, and simplify the code
...
slightly.
1994-10-07 09:08:29 +00:00
86e7908a72
Make some comments more clear.
1994-10-01 07:19:32 +00:00
f7b0f89811
Various minor changes to sync better with DG's version.
1994-10-01 07:13:32 +00:00
0e28696023
Add IO_PPI.
1994-10-01 03:52:46 +00:00
e32c213d35
Add IO_PMP[12] and IO_PMPSIZE.
1994-10-01 03:48:49 +00:00
b7cc64e049
Check the SB Pro IRQ and DRQ correctly. From Jason Thorpe.
1994-09-16 23:48:22 +00:00
c7003d37d3
Only reset FIFO if changing baud rate. From John Kohl (slightly edited).
1994-09-16 02:50:39 +00:00
8dd2c63b08
Turn off the delay debugging messages again.
1994-09-12 20:29:08 +00:00
584de55692
Missed an iobase that should be u_short.
1994-09-05 00:21:40 +00:00
a13c1b15cc
Minor.
1994-08-26 12:43:17 +00:00
de20d2cf67
Re-enable EISA reset code -- definately needed now. do RX_DISCARD_TOP_PACK
...
before leaving splhigh(), to give incoming packets a better chance.
1994-08-26 12:11:44 +00:00
6c2b49032b
fix debugging stuff, from dean
1994-08-25 20:18:25 +00:00
5e4a51278b
Set the FIFO threshold based on the receive speed, per Mark Weaver.
1994-08-24 07:25:18 +00:00
c4eac0f370
Some cleanup, checked by Dean.
1994-08-23 23:40:55 +00:00
8ac5e10c5d
Various code cleanup.
1994-08-23 19:30:12 +00:00
666f228bab
add `eg' driver for the 3c505 by <dean@fsa.ca>
1994-08-23 17:59:33 +00:00
996b2b5c54
Disable EISA reset, for now.
1994-08-22 21:53:23 +00:00
71c5da7bfb
Fix typo in WDCS_BITS.
1994-08-22 21:43:35 +00:00
8b8390a4bb
Look for MDMBUF in cflag, not lflag.
1994-08-21 15:04:37 +00:00
256353ef62
multicast
1994-08-17 06:04:49 +00:00
5f27568164
Eliminate struct pte and struct pde.
1994-08-15 14:46:45 +00:00
36975ff354
Don't use altsts. Sigh.
1994-08-15 08:22:20 +00:00
a618f9d915
Slight optimization, and don't go bonkers if one of the sub-devices is not
...
configured.
1994-08-14 14:13:25 +00:00
a570fcd929
Re-enable EISA reset.
1994-08-14 09:43:59 +00:00
cd2f7cc8a0
Clean up a little.
1994-08-14 09:24:55 +00:00
061c42c22d
Minor update.
1994-08-08 07:09:31 +00:00
59de58a39b
Count up the silo overflows and only log a warning at most once per minute.
1994-08-07 11:27:51 +00:00
9c8afcf191
Avoid using DFIFOHF, which doesn't exist on 6260 chips. Turn off
...
AIC_USE_DWORDS by default.
1994-08-07 10:51:40 +00:00
d9a996a92e
Add multiplexer for RT 4-port serial cards.
1994-08-07 10:45:53 +00:00
b6e9bf14c8
Simplify the DEPCA memory test, and fix a problem with using the alternate
...
PROM address.
1994-08-07 00:56:04 +00:00
ebd23fe5e0
cleanup
1994-08-06 23:19:39 +00:00
558c00c001
Fix spelling of `STEREO'.
1994-08-05 22:56:19 +00:00
cefefb25ca
cleanup, working 32 bit IO on the 3c579, and memory alignment of insl/insw
...
for better performance.
1994-08-05 21:16:33 +00:00
9d7eefb176
Change iosize to 16.
1994-08-03 09:17:12 +00:00
a17171c0a2
Add a missing splx() and increase the reset delay during probe, as suggested
...
by Juergen Keil. Add a diagnostic message if the controller info is not what
we expect.
1994-08-03 08:57:59 +00:00
45b0217c1e
Fix up u14_find() a bit; mainly, don't include a DRQ for the 34f.
1994-07-31 19:21:40 +00:00
a00c5fdb91
Add some missing newlines in the attach messages.
1994-07-31 18:25:50 +00:00
8a9df6389d
Bug fixes from Mark Weaver.
1994-07-31 11:34:38 +00:00
53f3b61cdc
Redux.
1994-07-28 19:57:31 +00:00
c405e84a24
port --> iobase
1994-07-28 09:50:33 +00:00
d02e11d543
Make the EISA reset code like the other drivers.
1994-07-28 08:44:47 +00:00
fb500c4d07
Redo some of the EISA config stuff.
1994-07-28 02:39:21 +00:00
c1a5741a3b
Remove unused macros.
1994-07-27 15:02:59 +00:00
5e04cfb942
Fix typo.
1994-07-27 13:24:17 +00:00
1939acdbd2
Fix the DMA setup.
1994-07-27 13:10:33 +00:00
1a9c6d05a3
Enable IRQ probing, and fix the DMA setup.
1994-07-27 12:57:02 +00:00
dffcd8ea8d
Enable IRQ probing.
1994-07-27 03:09:21 +00:00
16878bf2f9
Enable IRQ probing.
1994-07-27 01:50:57 +00:00
35b4db3030
Add IRQUNK.
1994-07-27 01:50:15 +00:00
b5ce4d0cdd
Normalize label handling.
1994-07-26 19:36:06 +00:00
a18c0c0d83
Look for errors in the right place in a transmit descriptor, and count
...
collisions.
1994-07-25 22:54:58 +00:00
220a5a5095
Add missing splbio()s, pointed out by Gene Stark.
1994-07-25 04:29:56 +00:00
1c46c460ee
Return EINVAL if the requested transfer size is weird.
1994-07-21 23:44:16 +00:00
7fca65c005
Remove something which cannot possibly be correct.
1994-07-21 04:15:05 +00:00
37dc11891c
Fix a typo.
1994-07-21 03:40:53 +00:00
4469aea569
Do the EISA probing a little differently.
1994-07-21 03:30:18 +00:00
3013b3fdbc
check if eisa card exists before tromping on dma
1994-07-21 02:51:53 +00:00
cc9da7d69f
Fix failed probe message.
1994-07-16 13:45:59 +00:00
e88e13f3bb
Fix a bogon relating to >16-bit addresses that I introduced. Fix up BPF
...
support for received packets.
1994-07-15 21:20:48 +00:00
db0e00db86
Clean up a bit.
1994-07-10 17:53:12 +00:00
668c4747b3
Rename flags; clean up a bit.
1994-07-05 21:20:20 +00:00
801d30952a
ISDEBUG --> LEDEBUG, and fix some ugly code.
1994-07-02 04:13:16 +00:00
943735dc41
modifications to the threshold and nicer error checking from christos
...
and .. splhigh() around insw/outsw code.. yetch
1994-07-01 23:08:11 +00:00
73aca695ac
Make sure we don't leave the interrupt masked after some errors.
1994-07-01 21:38:19 +00:00
2f609096e4
Inline le{rd,wr}csr().
1994-07-01 21:34:40 +00:00
bf74fc41d1
Add prototype.
1994-07-01 21:33:20 +00:00
f62bc452ca
Correct some comments.
1994-07-01 21:31:14 +00:00
66e72cdf4b
Rename is to le, and add support for some models of DEPCA.
1994-07-01 20:25:25 +00:00
a69dd750a2
b_un.b_addr -> b_data
1994-06-16 01:07:30 +00:00
f4a9e46aaf
Fix unimportant typos.
1994-06-13 18:54:41 +00:00
ff9c5cdde5
Set `uio_procp' field in case we ever need it.
1994-06-09 20:00:13 +00:00
bb4ba15c7f
Add (experimental) 24f handling.
1994-06-08 11:16:49 +00:00
00eb72f54b
two fixes from christos
1994-06-04 01:52:28 +00:00
9bc7771492
Allow the probe to succeed again on 445S cards.
1994-06-03 15:56:18 +00:00
37c76e16d1
Only print the blasted messages *once* per error.
1994-05-27 08:54:52 +00:00
30c08c899f
Copyright foo.
1994-05-25 20:41:53 +00:00
0645f8963f
Check the bus type, and don't attempt to enable the round-robin algorithm
...
on early boards. As suggested by Atsushi Murai.
1994-05-24 13:39:15 +00:00
a9376b883a
MIN --> min
1994-05-24 07:31:12 +00:00
ebcaebd335
MIN -> min, MAX -> max
1994-05-24 02:35:53 +00:00
057dc4deec
quiet compiler warnings
1994-05-23 03:02:13 +00:00
e47989d1e5
turn off spontaneous printing of messages when DEBUG turned on
1994-05-23 02:33:23 +00:00
18dab72811
32bit eisa does not work now, do not even try
1994-05-21 05:34:02 +00:00
922959fd05
Reverse the order of disabling shared memory and turning off 16-bit mode
...
where necessary, per Steve Wallace.
1994-05-19 07:47:34 +00:00
949b970c95
Use ether_ifattach() rather than doing the same thing in each driver.
1994-05-13 06:13:43 +00:00
7040f728a9
Fill in some more struct ifnet fields.
1994-05-11 12:09:17 +00:00
02ec14c597
Add dummy *dump() routines.
1994-05-11 09:49:17 +00:00
bd96a072fd
Nothing of consequence.
1994-05-11 02:28:42 +00:00
fcdc2b3f3f
Remove now-bogus cast.
1994-05-05 08:31:44 +00:00
5f478330e8
Remove now-bogus casts.
1994-05-05 08:31:00 +00:00
04df00527c
Retool the state machine is a sane way.
1994-05-05 08:26:13 +00:00
685508a6b4
Remove now-bogus cast.
1994-05-05 07:52:53 +00:00
a0a7429482
lots of changes: prototype migration, move lots of variables, definitions,
...
and structure elements around. kill some unnecessary type and macro
definitions. standardize clock handling. More changes than you'd want.
1994-05-05 05:35:42 +00:00
a9c3f137b5
Don't frob the connector type if the card doesn't grok soft config.
1994-05-05 02:20:44 +00:00
e5c1d566ef
Really fix the Buslogic/DTC problem.
1994-05-03 20:53:54 +00:00
0ee51c2c8b
Forgot to munge the #includes in last commit.
1994-05-03 20:32:22 +00:00
884168ce49
Move beep junk to clock.c.
1994-05-03 08:23:55 +00:00
36a9bcce8d
Fix argument to aic_sched_msgout() is several places, and condense some code.
1994-05-03 08:20:43 +00:00
394be046a5
insw takes a word count
1994-05-02 06:37:10 +00:00
e0db92993a
change timeout/untimeout/wakeup/sleep/tsleep args to void *
1994-04-29 23:15:51 +00:00
39718a43cc
Enable/disable shared memory access on all WD/SMC boards. Add support for
...
software selection of AUI or BNC connectors using LINK0.
1994-04-28 04:53:09 +00:00
fc844e1797
Style nits.
1994-04-26 03:43:26 +00:00
62773fc6f8
Add Adaptec 6360 driver from Jarle Greipsland, with some changes by me.
1994-04-26 00:05:56 +00:00
0e689f0375
Fix uninitialized pointer, pointed out by Michael VanLoon.
1994-04-25 03:16:03 +00:00
30c24e4508
bit better now, fixes from me & charles. squishy squishy squishy. HI ADAM!
1994-04-24 02:48:10 +00:00
2f66816d8b
Rename two files.
1994-04-24 01:34:05 +00:00
84752ce046
Don't need isa.h.
1994-04-24 01:29:56 +00:00
0ef8000051
Some changes from Charles, Adam and Christos Zoulas.
1994-04-23 04:31:12 +00:00
eb036e74c5
Don't need isa.h.
1994-04-22 23:02:40 +00:00
221b25fd9d
Separate DMA functions.
1994-04-22 22:58:50 +00:00
160fbf23ec
Fix typo.
1994-04-21 04:26:37 +00:00
584cd2e4c9
Clean up the TUNE_1542 code.
1994-04-21 03:37:19 +00:00
245097a031
Fix return of I/O space size from wtprobe(), as reported by Rafal Boni.
1994-04-21 00:41:52 +00:00
893be926ec
Use TAILQ_*() to maintain the drive activation queues.
1994-04-20 07:23:52 +00:00
0d93a0839c
queue up 8 mbuf chains once again, perhaps this will help?
...
read packets of the card before attempting to transmit (should improve speed)
1994-04-18 12:40:39 +00:00
4816eedf31
first attempt at EISA 32bit IO support. it still doesn't work so it's
...
disabled.
1994-04-16 09:53:45 +00:00
8aca9c1cbc
support multicast and promiscious mode
...
correct mbuf queue bugs, cleanup some extra symbols
try to let link0/link1 change while running, will this work?
1994-04-15 10:51:28 +00:00
07b3588735
Patches from David Greenman to eliminate magic constants and add delays when
...
switching to and fro 16-bit access for 790s.
1994-04-14 03:54:07 +00:00
920c317ff9
deallocate mbuf cache on ifconfig down.
1994-04-13 06:09:00 +00:00
e7eb2d4831
support multiple eisa/isa cards.
1994-04-11 11:09:00 +00:00
e872e13605
allow MDMBUF flags to be set (oops)
1994-04-10 10:29:06 +00:00
cabd481fa9
Don't print a duplicate message about stray interrupts.
1994-04-09 03:43:36 +00:00
fc5d3e31e0
Small fix to attach message.
1994-04-08 18:57:24 +00:00
55efebae3e
Fix return values from some interrupt routines.
1994-04-08 18:22:15 +00:00
72c593c2e3
Fix return fro isa_epprobe().
1994-04-08 17:58:47 +00:00
0ae5489036
Return correct values from edintr().
1994-04-08 17:16:39 +00:00
3f5e4f423f
Implement dynamic IRQ configuration and IRQ sharing. Inline spl*() calls.
...
Reorganize and clean up the relevant code.
1994-04-07 06:48:19 +00:00
8b1679d75d
Remove spurious arg to printf(), per JT Conklin.
1994-04-06 00:27:49 +00:00
314bc1f5db
Clean up #includes.
1994-04-03 22:50:14 +00:00
5edb523880
Remove an old hack that now just causes a small memory leak during autoconfig.
1994-03-31 16:59:04 +00:00
b6f5403319
Some patches from Rafal Boni to fix egregious 3C507 mistakes.
1994-03-31 06:16:35 +00:00
23c5083a45
Minor changes.
1994-03-30 18:35:11 +00:00
8ccc7bdffb
Turn off the timeout debugging info by default.
1994-03-30 04:58:32 +00:00
95f1b85a5a
astprobe(): Set ia_iosize.
1994-03-29 06:58:29 +00:00
592ec61b17
Updates for new autoconfig.
1994-03-29 04:35:37 +00:00
5eb99ad76e
New autoconfig mechanism. Hacked at the moment to use old config(8), but
...
look mostly like config.new to drivers.
1994-03-29 04:34:18 +00:00
6bce5180d6
New version from Sergey Ryzhkov and Serge Vakulenko.
1994-03-29 04:32:12 +00:00
e1d51562a9
New SCSI system, based on Julian's more recent work.
1994-03-29 04:30:15 +00:00
d5a269b4dd
Put controller target in scsi_switch.
1994-03-25 07:38:51 +00:00
008f13bb69
Fix off-by-one error in comopen() unit number sanity check. From Brian de
...
Alwis.
1994-03-25 04:38:01 +00:00
18f36e1745
copyright foo
1994-03-23 03:55:24 +00:00
a3c2ef3169
Don't poll more than 4 ports.
1994-03-23 03:04:32 +00:00
4cc5b77bfa
Some stylistic cleanup, and a very minor speedup.
1994-03-23 03:01:50 +00:00
c6b399cce8
add AST-style serial multiport support, from Roland McGrath
...
<roland@@frob.com>. Needs light clean by Mr. I386, but mostly
OK. For some reason, Bad Things (TM) happened on the last cvs commit.
1994-03-23 01:28:23 +00:00
c24c16f35f
add AST-style serial multiport support, from Roland McGrath
...
<roland@frob.com>. Needs light clean by Mr. I386, but mostly
OK.
1994-03-23 01:25:53 +00:00
456e197d26
add reasonable support for MDMBUF output flow control. input to be done later
1994-03-18 05:13:26 +00:00
b03c4f17ca
Remove two bogus splx()s.
1994-03-14 13:32:56 +00:00
936ff09fcd
Fix for trailer support reported by <sommerfeld@orchard.medford.ma.us>
1994-03-14 06:57:25 +00:00
fe3d0b99c3
Prefix the busy-wait messages with `ignore this:' so people stop reporting
...
it as a bug.
1994-03-12 22:36:40 +00:00
9ab5683dc7
Fix problem with reading the disk label if it's not at the beginning of the
...
disk.
1994-03-12 22:32:48 +00:00
39f57c7820
copy appropriate hardware config bits from config's flags
1994-03-12 08:04:19 +00:00
86ac0459be
fix some of the last; thanks to charles for looking it over...
1994-03-12 07:43:03 +00:00
c38cf8e43e
support new ioctls. fix the way CRTSCTS is used, etc. Seperate 'hardware'
...
and 'software' flags. beginnings of multiport support.
1994-03-12 07:25:16 +00:00
15d0f84500
Fix bug in last change.
1994-03-12 04:10:03 +00:00
15d758c39a
Remove backward compatibility hacks for config(8), as they are no longer
...
useful.
1994-03-12 03:45:03 +00:00
d884f7c425
Update to match config(8).
1994-03-12 03:34:02 +00:00
d72e576cfb
Rearrange top-level configuration to be more consistent.
1994-03-12 03:29:20 +00:00
119f3ea688
Various:
...
Put WDF_ERROR in the wdc_softc, to avoid gratuitously forcing non-active drives
into single-sector mode on the next transfer. Arrange to wait for an interrupt
after wdsetctlr(); this avoids long busy-wait delays, and gets rid of the
`extra interrupt' messages (except for one immediately after autoconfig on some
machines). Replace some uses of wdsetctlr() with simply lowering wd->sc_state;
no point in forcing this immediately. Allow control operations to time out.
Enable the warnings for long busy-wait delays by default. Some other minor
things not worth mentioning.
1994-03-11 23:29:12 +00:00
99dbc0692d
Add a heuristic for detecting old config(8)s. This is very temporary.
1994-03-10 22:30:06 +00:00
390f5990bb
Now that the disk probe routines are actually called, they need to return
...
something.
1994-03-10 21:52:07 +00:00
b8be52a88c
Update for new config; handles subdevices differently.
1994-03-10 21:38:46 +00:00
367c93feb4
Updates to match config(8).
1994-03-10 20:52:09 +00:00
0c19458c6f
More updates for new config.
1994-03-10 20:05:30 +00:00
aa45779df7
Update for new config.
1994-03-10 19:57:20 +00:00
095308adeb
Add isa_dmaabort().
1994-03-10 18:14:32 +00:00
e4102b8797
Cleanup to fit standard coding conventions, and *many* bugs fixed.
1994-03-10 05:18:33 +00:00
aab638bd07
Fix NS handling.
1994-03-09 17:19:10 +00:00
3a57542a30
Back out previous change for now.
1994-03-09 07:58:39 +00:00
a692d2185a
Inline spl*() calls.
1994-03-08 13:24:46 +00:00
a618881dd7
#include cpu.h in all files which use spl*().
1994-03-08 12:21:10 +00:00
49051114a6
Major cleanup and many bugs fixed; based in part on Brad Huntting's version
...
for BSD/386. More to be done when the low-level interrupt system is replaced.
1994-03-08 08:12:56 +00:00
5a17003403
Some changes inspired by Bruce Evans's driver:
...
Consolidate error reporting in one function. Actually use the dk_status and
dk_error fields, and pass around only the error bit to avoid lots of unneeded
assignments and tests. No functional differences.
1994-03-07 05:54:44 +00:00
991225bfc8
Remove DKFL_QUIET.
1994-03-07 03:18:35 +00:00
581b6ca207
Don't let uninitialized variable slip by
1994-03-06 19:34:46 +00:00
41cc9cb4f2
Better delay() from magnum branch.
1994-03-06 17:37:56 +00:00
5f4063cc56
DELAY() --> delay(). This is not a macro.
1994-03-06 17:21:44 +00:00
mycroft