before it can be useful, and [B] #ifdefs do not belong at every call site,
a common API should be defined and the implementations conditionalized, not
the calls. Duhh.
Also, remove the initial XXX mystery_icu debugging code.
Like the 1000A, the AlphaServer 1000 has a daughtercard assembly that
integrates the CPU and core logic, so these can be ev4/apecs or ev5/cia.
New systype, and, sigh, another way of doing interrupts and another
mystery icu.
Kill off some EVCNT_COUNTERS calls, since [A] it has to be rewritten anyway
before it can be useful, and [B] #ifdefs do not belong at every call site,
a common API should be defined and the implementations conditionalized, not
all the calls. Duhh.
AXPpci33 machines + power management and a Cirrus PCI-PCMCIA controller.
There is currently no support for the power management facilities, and
the PCI-PCMCIA controller driver needs some work, but this should boot
and run from disk.
the iot, memt, and pc in the call so that pci_1000a_pickintr() (and the
other routines in that module) do not need to be aware of the core logic
type just to pass down memory and I/O space tags or to call the decompose
function.
Use the check recommended by the Digital Workstation engineers; look
for Miata 1 systems (i.e. with Intel SIO). From Andrew Gallatin.
- Update copyright (Pyxis and BWX).
device 4. Miata 1.5 and Miata 2 have a Cypress at device 7 and PCI IDE
at functions 1 and 2 of the Cypress (like the PC164SX). These on-board
PCI IDE controllers are wired to compatibility mode, so don't bother
trying to map the interrupt.
on the ALCOR2 and Pyxis. BWX is enabled iff:
- It hasn't been disabled by the user (patch `cia_use_bwx' or build cia.o
with the option "CIA_USE_BWX=0"),
- it's enabled in CIA_CSR_CNFG,
- we are running on an EV5-family processor,
- BWX is in the processor's capabilities mask.
the scatter/gather TLB cannot be invalidated on these chips. So, to
work around this, we configure the otherwise unsed DMA Window 2 as a
2M SGMAP window at 128M, point all of its page table entries at the
DMA spill page, and, when the TLB is to be invalidated, put the PCI bus
into loopback mode, and create a target hit on Window 2 every 64k for
the number of TLB entries (plus a few ... it seems to not work unless
we read a few extra times), forcing out old TLB entries to make room for
the new, dummy target hits.
thorpej