Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
65,185 Commits 606 Branches 0 Tags 3.1 GiB
0d866249d4
Commit Graph

7928 Commits

Author SHA1 Message Date
oster
d2b2ed0970 Checking parity re-write status makes no sense on RAID 0, but let's 
return something reasonable anyway.
 2000-05-27 18:23:27 +00:00
scw
46807640c7 Add support for the OPTi 82c621 PCIIDE controller and its derivatives. 
I only have a Compaq laptop on which to test this, so reports of
success/failure in other systems would be welcomed.
 2000-05-27 17:18:41 +00:00
scw
1d2a3e79a9 Regen. 2000-05-27 17:12:36 +00:00
scw
713621eb0e Add entries for a couple of OPTi PCI-IDE controllers. 2000-05-27 17:11:37 +00:00
nathanw
00369993f9 Whitespace police. 2000-05-27 16:38:02 +00:00
bouyer
e42c2ac5fb Ops, state should be RESET, not RECAL here. 2000-05-27 16:11:16 +00:00
soren
ed0572ca92 Regen. 2000-05-27 11:40:04 +00:00
soren
eaef48d317 Add a few devices. 2000-05-27 11:38:31 +00:00
thorpej
21fc65e1a8 sleep() -> tsleep() 2000-05-27 04:52:27 +00:00
thorpej
d0a8b751b2 Don't use sleep() and a callout; just use tsleep(). 2000-05-27 04:46:24 +00:00
matt
dd266dbb2f Fix counting of output packets. Only count descriptors with TDES_LS set. 
Also make transmit timeout logic more correct.
 2000-05-27 04:26:32 +00:00
tsutsui
7ae8c684a8 Increase delay on EEPROM access. 
CATS sometimes cannot read MAC address correctly.
 2000-05-27 00:55:42 +00:00
ragge
38d5764cd1 Fix for a driver bug provided by Jon W Grubbs (jgrubbs@megsinet.net). 
This bug is only visible on some disks, and I have verified that it works
correctly on VAX. However, du to the author, it is a problem on other
machines/disks as well. Here's the author's comments:

> The MI code for the NCR5380 has a small bug in it  The RZ56 wants to
> negotiate for Synchronous Data Transfers and when it does, the current code
> looks like it will send a REJECT message as the spec calls for when we cant
> handle the request.  However, a couple of lines of code in the
> ncr5380_msg_in routine are missing wrt the PARITY message and anything that
> wants to send a REJECT message.  The ATN setup that is done in
> ncr_sched_msgout is immediately negated by the final byte ACK sequence in
> this routine.  This causes bad things to happen to an RZ56.
 2000-05-26 21:11:00 +00:00
tsutsui
e3427d8f2c Call bus_dmamap_sync() properly before/after reading fcd_stats 
in fxp_control_data.
 2000-05-26 19:11:24 +00:00
thorpej
8a3725612d Add support for the Davicom DM9102 and DM9102A 10/100 Ethernet chips. 
Partially based on diffs submitted by Matthew Orgass <darkstar@pgh.net>
and IWAMOTO Toshihiro <iwamoto@sat.t.u-tokyo.ac.jp>.
 2000-05-26 16:38:13 +00:00
dante
3d7bdc4c94 Fix a bug introduced in last commit which caused a painc due to 
re-enqueueing an already free ccb.
Prepare the background to have a unique initialization function for
    all of the supported host adapters.
Rename a lot of #define in a more sane way.
Move Carriers initialization and defines in adwmcode.{c,h}
Don't lose Carrier nodes in case of a BUS/Chip reset explicitly invoked
    after a DMA failure.

XXX - DMA failure still arise when AdvanSys U[2]W host adapters are used
      in conjunction with Intel 82443BX Host Bridge/Controller (rev. 0x03).
      !?!Have to understand why!?!
 2000-05-26 15:13:43 +00:00
haya
de5dacd81d KNFfied those files. 2000-05-26 06:32:56 +00:00
matt
bf05730540 Regen. 2000-05-26 05:07:02 +00:00
matt
5bd1e75033 Add NEC 1394 OHCI chips 2000-05-26 05:06:27 +00:00
tsutsui
5dca757b0e Swap the order of u_int16_t member in Tx/Rx descriptors 
on big endian machines.

"Big endian mode" of smc83c170 actually works!
(i.e. no htole??()/le??toh() functions are needed.)
 2000-05-26 00:20:26 +00:00
tsutsui
dea97be7fd Don't use bcopy() to copy u_int16_t data to u_int8_t array. 2000-05-26 00:14:41 +00:00
thorpej
c9a7ec7a66 Add Davicom DM9102 registers. 2000-05-25 22:50:11 +00:00
thorpej
7c709cc6b4 Comment the fact that the X3201-3 requires FS|LS in the setup 
packet descriptor.
 2000-05-25 22:18:07 +00:00
thorpej
f4a3f5ea48 So, while the DEC chips and other clones want no FS|LS in the 
setup descriptor, apparently the Xircom X3201-3 requires it.
 2000-05-25 18:46:07 +00:00
mycroft
4bfbc7641d Recognize the DE-650 with another vendor/product pair and OUI. 2000-05-25 17:21:48 +00:00
thorpej
215a635a5b Truncate receive buffers to 4-byte boundary. Slightly modified 
from kern/10198, from Izumi Tsutsui <tsutsui@ceres.dti.ne.jp>.
 2000-05-25 16:47:18 +00:00
thorpej
2f08658512 Fix a couple of typos in debugging messages. From IWAMOTO Toshihiro, 
kern/10194.
 2000-05-25 16:37:33 +00:00
thorpej
05a766d42e Don't set FS and LS in the setup packet descriptor. From 
IWAMOTO Toshihiro <iwamoto@sat.t.u-tokyo.ac.jp>, kern/10194,
and confirmed with the 21040 manual.
 2000-05-25 16:36:03 +00:00
fvdl
3e54d43abc Be sure to not use tagged queueing for a few commands. 2000-05-25 11:41:05 +00:00
bouyer
c9347a04a5 Regen. 2000-05-25 10:16:37 +00:00
bouyer
b063b2ec36 Separate the sheduler from the main script, allocate another DMA-safe 
memory page for the sheduler. Put the main script in the on-chip RAM when
available.
Avoid a null-pointer dereference when DSA is invalid.
 2000-05-25 10:10:54 +00:00
thorpej
4f92d2cd54 Update from Bill Studenmund <wrstuden@zembu.com>: 
- Note that the FreeBSD driver distributed by Cyclades served as
  documentation on how the board works.
- Use the wait-until-pending-I/O-completes-before-loading-parameters
  command in czttyparam().
- Pass BREAKs up to the tty later properly.
- Garbage-collect some debugging code.
 2000-05-24 22:26:35 +00:00
soren
c25111e4ae Make two previous changes more correct, as shown by Izumi Tsutsui. 2000-05-24 13:20:32 +00:00
soren
8922795de0 The EEPROM is little-endian. 2000-05-24 08:04:23 +00:00
soren
66083288eb Fix DMA status reading on big-endian systems. From Sanjay Lal on port-macppc. 2000-05-24 07:49:13 +00:00
soren
35bf53bd9c And a newline after error string. 2000-05-24 06:04:12 +00:00
itojun
37cc37ead2 correct pcmcom detach (like card removal). PR 9334. 2000-05-24 03:44:46 +00:00
christos
d4bcd03b81 PR/10154: Antti Kantee: ignore 0 length resource(s) 2000-05-23 17:50:53 +00:00
bouyer
2904666f56 Allocate dynamically the command block descriptors. 2000-05-23 17:08:07 +00:00
thorpej
8f7304f9b7 Typo in previous. 2000-05-23 16:47:44 +00:00
bouyer
e662e86225 sd_interpret_sense() can be called from interrupt context; call scsipi_start() 
with XS_CTL_ASYNC if the failed command was called with XS_CTL_ASYNC.
Add a SDF_RESTART flag to keep state, cleared in sddone().
A mounted disk can now spin down, it will propely spin up at the next access.
 2000-05-23 10:20:14 +00:00
bouyer
373582e298 scsipi_get_xs(): if we have XS_CTL_URGENT, return an xfer even if 
active >= openings. An XS_CTL_URGENT command could otherwise fail, especially
if openings == 1.
 2000-05-23 10:16:43 +00:00
enami
28ec465498 Remove $Id. 2000-05-23 08:41:49 +00:00
enami
f87f33d513 Allow userland to retrieve whether the card support WEP while the 
card power is off.  This allows wiconfig to set WEP key etc while power off.
 2000-05-23 08:25:51 +00:00
soren
9f00930ace Make AHC_DEBUG compile. 2000-05-23 03:50:12 +00:00
mycroft
b7c3dc6d20 Recognize more models of the IBM card. From PR 10137. 2000-05-23 02:55:19 +00:00
thorpej
5c9920bbb6 Update from Bill Studenmund <wrstuden@zembu.com>: 
Correctly send and receive BREAKs -- still needs to do something
intelligent with them.  Some additional debugging goo.
 2000-05-23 01:02:21 +00:00
thorpej
b8322d5c23 Const poison the layout name. 2000-05-23 00:44:38 +00:00
fvdl
c9fe89891a Don't try to re-enable tags once they have been disabled because of a 
MSG_REJECT from the target. Obey the NOTAG quirk.
 2000-05-22 21:14:24 +00:00
thorpej
f5d4219e96 Remove an used variable and add a missing `}' so that this compiles. 2000-05-22 16:52:03 +00:00
wiz
c2b6147132 Replaced overlooked BROOKTREE_SYSTEM_DEFAULT with BKTR_SYSTEM_DEFAULT, 
as noted by Roger Hardiman.
 2000-05-22 01:00:29 +00:00
wiz
56cb02c358 Use bktr_softc.bktr_dev.dv_xname instead of "bktr0" when printf'ing as 
requested by Klaus Klein in kern/10166.
Also add device instance name to all printf's that didn't have it.
 2000-05-21 15:43:56 +00:00
tsutsui
a6d8e45ba7 Call bus_dmamap_unload() if any Tx mbuf remains in rtk_stop(). 2000-05-21 13:00:46 +00:00
matt
20a98cb524 count input and output packets. 2000-05-20 18:33:18 +00:00
thorpej
649ff32f2b Rather than using a magic constant, use `com_scratch' as the offset 
in UART space to the interrupt CSR.
 2000-05-20 18:25:41 +00:00
augustss
c3e3a945cc Add a missing bktr%d: in one of the attach messages. 
(When is this code going to be KNFed?)
 2000-05-20 16:16:15 +00:00
ragge
9f7a44710e Remove (more) VAX dependencies. 2000-05-20 13:41:33 +00:00
castor
9816b43753 regen 2000-05-20 06:30:13 +00:00
castor
773f9bb009 Add Geocast's vendor ID 2000-05-20 06:29:50 +00:00
thorpej
071aed40ac A foolish consistency; most parts of the kernel use bp->b_data, so 
change these from bp->b_un.b_addr to bp->b_data, as well.  This also
allows us more flexibility to experiment with other data buffer types
hung off of struct buf.
 2000-05-19 18:54:22 +00:00
drochner
415552f3db add spanish keymap, data from 
Juan Jose Garcia Ripoll <jjgarcia@ind-cr.uclm.es>
 2000-05-19 16:40:04 +00:00
drochner
4a523cfe34 define spanish keymap 2000-05-19 16:39:15 +00:00
jhawk
92f539aa66 Calibrate the timeouts from rev 1.26 by using DELAY(1) so their 
values are less machine-dependant. Fixes port-i386/10141, where
spurrious timeouts were being seen.
Also note the line numbers of the timeouts so it can be determined
which is being seen (via __LINE__).
 2000-05-19 16:00:30 +00:00
tsutsui
f2973e2fb8 - Change RL_* -> RTK_* 
- Free bus_dma resources if attach fails
- Add detach and power management code

Patch from Masanori Kanaoka <kanaoka@ann.hi-ho.ne.jp> in kern/10156.
 2000-05-19 13:42:29 +00:00
kleink
5f56eae96a Add a quirk table entry for the OnStream ADR50 Drive; 
from S.P.Zeidler <spz@serpens.swb.de> in kern/10118.
 2000-05-19 06:55:42 +00:00
thorpej
3e403cdb65 In tiocm_to_cztty(), use SET() instead of CLR() in the 
TIOCMBIS case.  "Oops!"
 2000-05-19 06:01:14 +00:00
eeh
424619ca1a Fix the sparc64 console. 
Unlike the other Sun machines, UltraSPARCs can have consoles run on different
chips than zs, so we need to support them.  So, here we go:

	Add a new PROM console driver with a major number and everything.
	This is the default driver if nothing else attaches.  It does not
	use the keyboard driver since the PROM translates keystrokes itself.
	(Unfortunately it also swallows L1-A).

	Have the keyboard driver take over the console when it attaches on a
	serial port.  When a serial port detects a keyboard and attaches the
	keyboard driver, it needs to provide a set of consdev vectors.  They
	keyboard driver will use those to send I/O to the keyboard and mouse.
 2000-05-19 05:26:16 +00:00
minoura
c2e8f67477 Add some missing casts of ioctl arg. 
Obviously autoconfiguration wouldn't work on big-endian machines.
 2000-05-19 04:53:25 +00:00
thorpej
f636538446 NULL != 0 2000-05-19 04:34:39 +00:00
thorpej
1cff94b896 Add missing field in static initialization. 2000-05-19 04:03:33 +00:00
thorpej
59164fe0fc Fix an inverted test. 2000-05-18 17:55:17 +00:00
mrg
badbd98b2a rearrange the order of bus_dma operations to be more like many other 
drivers, at the suggestion of fvdl.  also, use bus_dmamap_load() not
load_raw().
 2000-05-18 14:00:46 +00:00
drochner
6095f60587 regen 2000-05-18 13:04:27 +00:00
drochner
309b0ed70d fix typo in last commit 2000-05-18 13:03:31 +00:00
mrg
cc57e4111a do not pass a `boundary' argument to bus_dmamap_create(), particularly one 
that is smaller than the `size' argument.
 2000-05-18 12:49:09 +00:00
garbled
4d3e8e6976 regen 2000-05-18 08:03:22 +00:00
garbled
81fd58c65b Add the device ID for the IBM MPIC-II. 2000-05-18 08:02:19 +00:00
thorpej
b5cf4e96cf Use big-endian CRC on ADMtek multicast hash. 2000-05-18 03:02:45 +00:00
thorpej
5274a6162f Add a device driver for the Cyclades-Z series of intelligent multi-port 
serial boards.  Written by Jason R. Thorpe and Bill Studenmund.
 2000-05-17 17:58:09 +00:00
thorpej
07ea678d4d Register definitions and preliminary API definition for the PLX 9060 
family of PCI bus controllers.
 2000-05-17 17:47:00 +00:00
thorpej
463931b3ba Nuke dk_establish() from orbit except from those ports which still use 
it to determine the boot device: mvme68k, pc532, macppc, ofppc.  Those
platforms should be changed to use device_register().  In the mean time,
those ports defined __BROKEN_DK_ESTABLISH.
 2000-05-16 05:45:44 +00:00
thorpej
47490d3527 Whitespace glitch. 2000-05-16 00:18:44 +00:00
thorpej
e7d81a3225 Fix a tyop, pointed out by Bill Studenmund. 2000-05-15 23:56:49 +00:00
dante
e66be0bd10 Cosmetic change 2000-05-15 16:38:49 +00:00
dante
ceb378e070 Add few peripheral device type 
Remove "???" from T_IT8_1/2. They actually are pre-press devices for graphic arts as described by ASC IT8
Zeros and blanks scsipi_inquiry_data from byte 58 to byte 74 if additional_length is less than 58
 2000-05-15 16:35:49 +00:00
bouyer
c94bdce1f4 Don't enable debug message by default. 2000-05-15 15:16:59 +00:00
bouyer
7e71ffde06 Sync copyrigth notice 2000-05-15 08:48:25 +00:00
bouyer
c4042e45a5 Sync my copyrigth notice. 2000-05-15 08:46:00 +00:00
bouyer
92a5f4d724 Sync my copyrigth notice 2000-05-15 08:32:07 +00:00
bouyer
2b86c61a31 - sync my copyrigth 
- Add usefull message for obsolete error code (part of fix for kern/9856).
 2000-05-15 08:31:33 +00:00
bouyer
e557084177 Update for siop split. 2000-05-15 08:27:24 +00:00
enami
769cc65919 Free memory when failed to map it. 2000-05-15 08:08:12 +00:00
enami
01f1223f94 Cosmetic changes. 2000-05-15 07:57:19 +00:00
bouyer
a1c4db6c37 - split siop_pci in attachements vs helper functions, for comming esiop 
- add a reset callback to enable PCI-specific features. This improve bandwith
  by a factor of 2 on my alpha with a 875 !
- sync copyrigth notice
 2000-05-15 07:53:17 +00:00
bouyer
863014523a - split siop.c in script-dependant vs script-independant part, for 
comming esiop
- add a reset callback for bus-dependant registers settings
 2000-05-15 07:48:24 +00:00
bouyer
95d08cb691 Regen 2000-05-15 07:44:05 +00:00
bouyer
06d4aa45eb - use my standart copyrigth notice 
- After reselect, don't clear ack after the IDENTIFY message, this breaks
  when the reselecting target has different sync parameters than the previous
  one.
 2000-05-15 07:43:45 +00:00
thorpej
7da80620c9 splimp() -> splnet() 2000-05-15 01:55:53 +00:00
thorpej
e5ae7c287a Symbol namespace cleanup: rl_ -> rtk_ 2000-05-15 01:55:12 +00:00
thorpej
a4b298224a Use <dev/ic/ac97reg.h> 2000-05-15 01:35:29 +00:00