0b22968311
Initial commit of iic and rtc devices.
1996-04-19 19:49:03 +00:00
ab4a325e4c
The iic and rtc are now devices and have been rewritten ane moved to the
...
mainbus directory.
1996-04-19 19:43:31 +00:00
11fb5f4ba0
Added configuration information for character devices iic and rtc.
1996-04-19 19:40:29 +00:00
85d47049cc
Don't report time or 'clock has gain ...' message if the base time
...
was 0 in the inittodr() function.
1996-04-19 19:39:17 +00:00
901483b57b
Sigh. Send a trace trap only if we are still in VM86 mode.
1996-04-18 21:21:11 +00:00
15d4e17598
Send a trace trap only if the trace flag is set at the *beginning* of
...
the emulated instruction.
1996-04-18 20:36:35 +00:00
204542255a
After an emulated instruction, check the trace flag and force a trace
...
trap if needed.
1996-04-18 19:58:09 +00:00
442dec5d53
new driver: SCSI for VME147
...
contributed by: Steve Woodford <steve@mctavish.demon.co.uk>
this driver is based on the amiga sbic/33C93 driver. Steve has
cleaned it up and fixed lots of bugs. Note that the original driver
used features which require at least a WD33C93A (the vme147 has the
original WD33C93 chip <no 'A' suffix>). Steve has also written
the DMA routines for the 147 to get things really going. Hardware
scatter-gather DMA and sync. SCSI are not supported (yet). tested
on several disk drives and a tape drive. CD-ROM untested, but
should work.
1996-04-18 18:30:49 +00:00
da32bd7fed
add wdsc, enable FFS, move le
1996-04-18 18:14:32 +00:00
f56be1680c
add wdsc device
1996-04-18 18:07:58 +00:00
a574a3a423
add PCC_ICLEAR
1996-04-18 18:07:08 +00:00
94b120dfa8
add a "delay" function.
...
XXX: assumes vme147 speed. needs to be fixed and sync'd with DELAY.
[will work with jason/hp300 to fix it properly]
1996-04-18 18:06:30 +00:00
dbc3478277
establish a dk_establish() function.
1996-04-18 17:43:04 +00:00
47bf863ac1
Make some of the flag handling clearer. No functional change.
1996-04-18 10:04:32 +00:00
aaed1c2fae
Don't bother to enable alignment checking; nobody uses it and it interferes
...
with VM86 mode.
1996-04-18 09:58:13 +00:00
b3fadef7e0
Yet more prototyping and -Wall fixes.
1996-04-18 08:51:11 +00:00
7a8c8f8a5c
Turn off the alignment check flag when entering a signal handler.
1996-04-18 08:36:20 +00:00
7458364702
Implement the I/O read/write-multiple functions for chipsets
...
that use this file (APECS, LCA, and CIA).
1996-04-18 05:53:04 +00:00
ff0a52ccd9
define bus_io_{read,write}_multi_{1,2,4,8} functions, which read/write
...
multiple values from a single I/O port in to/out of an array of values.
1996-04-18 05:47:29 +00:00
e27e15d0ac
change NLE flag for IOASIC LANCE buffer to NLE_IOASIC, and add comments
1996-04-18 00:59:11 +00:00
03d386daa7
attach le with different attributes, depending on parent (i.e. tc or
...
ioasic), and use those attributes to pull in appropriate files.
le_ioasic now has needs-flag, but le doesn't; the flag is only necessary
on systems configured with IOASIC-attached LANCE chips.
1996-04-18 00:55:15 +00:00
d7d306aeb7
change LANCE copy & zero functions' names to start with amd7990_, and
...
remove their 'integrate' (usually defined to be 'static') keywords.
when lance drivers are split up by attachment, more than one file will
reference the copy/zero functions (i.e. not just the file that pulls in
am7990.c... and eventually inclusion of am7990.c should go away entirely).
1996-04-18 00:25:11 +00:00
17731baa0d
fix copyrights
1996-04-17 22:22:32 +00:00
69ad2e587b
ioasic doesn't need a flag, and correctly conditionalize inclusion of
...
machines' tc configuration files.
1996-04-17 22:08:29 +00:00
71c7924099
clean up clock handling: clock drivers are now seperate from the
...
chip-independent clock code. 'clock' has been renamed 'mcclock' 'clock'
has been renamed 'mcclock' (since it's a driver for that particular
clock, and since eventually there may be another clock chip driver),
and now attaches via seperate match/attach functions to both TC and ISA.
This removes a whole lot of #ifdefs...
1996-04-17 22:01:16 +00:00
a5778ae63b
print cpu names slightly differently (number first)
1996-04-17 21:50:56 +00:00
0b0a8bfe15
fix bug in pcivga_erasecols() that would cause garbage to be spit out.
...
other minor style cleanup.
1996-04-17 21:49:58 +00:00
d727565526
fill in the tty window size information, so that standard terminal
...
entries can be used with weird displays.
1996-04-17 21:48:30 +00:00
60add3dea0
update for current state
1996-04-15 19:00:46 +00:00
1bd905d710
include <sys/termios.h> to make <dev/isa/comvar.h> happy, and set the
...
serial ('com') console bit size and parity to be "cs8 -parenb".
1996-04-15 18:58:20 +00:00
e0afa4e4f9
Don't turn off the trace flag here; let sendsig() do it.
...
If in Linux emulation, send SIGSEGV for protection faults, rather than SIGBUS.
1996-04-15 00:20:32 +00:00
274c2bd80d
Add a prototype for generic_intr_establish(), the bus-independent
...
pmax interrupt-establish function.
1996-04-14 00:58:21 +00:00
28986d8126
Add cdev_decl() declarations for the "dtop", "fb" , and "rcons" drivers.
1996-04-14 00:56:59 +00:00
4a04d76c65
Fix the definition of TC_PHYS_TO_UNCACHED(addr): make it change a mips
...
kernel addressed to uncached space.
Add prototypes for pmax-specific TC functions used in probing for
a framebuffer console.
1996-04-14 00:55:19 +00:00
ff35ddbb2a
Update makeoptions to include 881 support
1996-04-13 19:12:46 +00:00
a0b7376b16
Add prototype and fix return type of blink() so "options BLINK" works
...
with -Wall -Werror
1996-04-13 17:40:03 +00:00
98d92322b1
update for recent config changes: xxcd -> xx_cd
1996-04-13 00:31:37 +00:00
cad6c2d600
capitalize IRQ names here, to match what's reported on boot
1996-04-13 00:25:24 +00:00
21ac0b2a36
update for new ISA/EISA/PCI/'bus' interfaces. Untested
1996-04-13 00:24:30 +00:00
161623e54e
add (untested) support for EISA busses hanging off of PCEBs.
1996-04-13 00:23:34 +00:00
f32c94e82c
note that these IRQs are ISA IRQs
1996-04-13 00:22:58 +00:00
c0b2b5595c
Replace with completely new version derived from APECS code. No serious
...
bugs to fix (that i know of), just doing it that way was easiest.
1996-04-12 23:37:10 +00:00
56a6e33bb6
"Do over." Throw the old file away, replace it with a version hacked
...
from the current apecs_pci.c. This new version hopefully works for
the same sets of devices that that previous one did, and hopefully
will work for multi-function devices and for secondary PCI busses as
well. (looking at the code, there was no way the old one could have!)
1996-04-12 23:27:05 +00:00
435c2f935e
config first, so there's someplace to cd to.
1996-04-12 20:27:42 +00:00
ae42d9fdbd
oops; forgot to remove a line of debugging/testing code
1996-04-12 20:22:14 +00:00
6e40f439fc
Part of restructuring done for 3-button mouse support.
1996-04-12 19:55:28 +00:00
4d91dc7c18
pull in ieeefp.h from m68k common area
1996-04-12 18:38:00 +00:00
c7a59b578d
sync with sun3 version
1996-04-12 18:35:40 +00:00
4420159d4c
fix warning from gcc
1996-04-12 18:33:59 +00:00
f0d175fd22
Commit version that _really_ has only the innocuous fixes in the
...
last CVS message.
Possible uninitialized use of variables in the SII state machine,
requiring more thought, are still present.
1996-04-12 18:22:35 +00:00
mark