like the SMC83C100 EPIC/100 driver:
* Rather than using pointers to the head and tail of the transmit and
receive rings, use wrapping indexes into arrays. This is a little more
obvious when reading the code.
* More cleanly separate the hardware descriptor from the software descriptor.
* bus_dma it everywhere.
* Implement interrupt pacing and avoid a potential race in the transmit
loop.
Now this looks more or less like the Rhine driver I was working on when
this driver was committed :-) Update copyright notice to reflect that.
Use fast memory timing NVRAM parameter. Clean up and fix establishment
of default target parameters. Don't use NVRAM if are flagged as not to
do so (I had a busted NVRAM setup which I couldn't edit that enabled SYNC
mode but disabled disconnect/reconnect and wide!!). Fix delays after
resets. BUS resets not done in isp_init anymore- relegated to OS
specific outer layers. Fix a buglet where you can get in a loop for
a NULL xs in the completion list in isp_intr. Add in some defines that
can disable fast posting. Add in code for Loop Up/Loop Down events that
call into the outer layers as to what to do.
define. Add a new config flag param (ISP_CFG_NONVRAM) whose intent it is
to cause NVRAM to be ignored. Add ISPASYNC_LOOP_DOWN and ISPASYNC_LOOP_UP
isp_async enums.
(we get LOOP DOWN events, and we'll hang on that at this time).
Add other isp_async cases- ISPASYNC_LOOP_DOWN and ISPASYNC_LOOP_UP. DOWN
will cause internal queuing until UP, whereupon a timeout will fire up
any pending xfers. It doesn't really keep commands from getting destroyed
by loop down events, but at least minimizes the damage. This was much
easier to implement with CAM.
command (unlock for sd and cd) if no other partitions are open, return
EBUSY otherwise. DIOCEJECT will have the old semantic if its argument is not
0. The old ioctl has been renamed to ODIOCEJECT for binary compatibility.
the disk is ready to transfer data, and in ATA-5 the DSC has been obsoleted.
So only wait for DRQ to transfer data. This can be made conditional on the
ATA version if it's proven to break with some drives (worked with all the
drives I have access to).
While I'm there correct a few typos.
contiguous chunk of outq to emulation routine. Fix based on patch
from M. Drochner, modified to call output routine once with each
contiguous chunk when the ring buffer wraps around.
improvement in the "cat /usr/share/misc/termcap" benchmark on 486/75
ttwrite queues data for us in OBUFSIZ chunks. If we only consume
OBUFSIZ-1 bytes per call to wsdisplaystart(), we're *guaranteed* to
fall behind when given maximum-sized reads (which will defer
processing the leftovers until ttrstrt gets called, after a timeout)
Note that OBUFSIZ*4 may be overkill; OBUFSIZ*3 may be sufficient to
get maximal performance; OBUFSIZ*2 resulted in only about a 2.5x
performance improvement, but it's 2am and I've done enough tweaking
for the night.
on the 8 port card Simon Gerraty has. In general, cards which have
this lots of ports also have a separate interrupt status register, but
this change is just to talk to the various ports independently. It works,
but it's not optimal. (XXX still need a good name for the card in the
comments, and to update the manual page.)
has the same 4-byte alignment requirement that the transmit side does. This
causes the packet payload to be misaligned. So, on systems which require
strict alignment, we must copy the incoming frame to a new packet buffer,
suitably aligned.
* Move the printf() delay to just after the printf(), where it actually makes
sense.
* Use zstty_stint() and zstty_softint() from zsparam(), to force an immediate
update of the carrier and flow control status. Abuse this in the attach and
open functions to defer all of that work. This insures that we don't lose
any status updates.
* Don't screw with register 1 when closing the console.
* Fix bugs in TIOCM??? (stay semicolon, clearing DTR while transmitting).
* Add comments in a couple of places.
This is done on a physical page size basis, instead of virtual (as the
(on vax yet non-existing) bus_* routines does). This is similar to the
way uba allocation is done.
the startup code. Implement a call to outer framework function so that
asynchronous events can be handled (e.g., speed negotiation, target mode).
Roll internal release tags.
cycle to get rid of the old 1.31 firmware. *@!$&^@&$!&^&^!!!!!
But anyway comment it out and use new SBus 7.55 firmware. We get fast posting
with this as well as 32 luns and target mode support.
in the drive. restrict "opening of empty drive" to character devices only
(reading a block device returns a short read instead of ENODEV, which can lead
to confusion).
1. If the current screen becomes invalid (ie no focus anymore), always
set the keyboard to translating mode. Otherwise, we could get stuck
because the command keystokes don't come through.
2. Catch errors in attaching to a process (X server) - For this,
implement a callback mechanism similar to the detach case. Add an
argument to report an errno via callback.
might be called without process context, leading to tsleep() panics
(This is a workaround. The timeout() driven wscons glue code
should go instead.)
Fixes tsleep() panics reported by Mark Brinicombe <mark@causality.com>
and Eric Haszlakiewicz <haszlaki@UAccess.NET>.
out-dated comments, and other unneeded stuff. This helps prepare
for cleaning up the rest of the code, and adding new functionality.
No functional changes to the kernel code in this commit.
Thanks to Scott for pointing this out to me (I got his mail and figured out
this change before seeing the discussion on tech-kern) and to Charles for
the initial explanation.
(Nonaka Kimihiro): grave accent and @ were the wrong way
-assign keysyms to the special japanese conversion keys (even if this
doesn't help wscons - but things must have names)
In wdc_probe_caps() add code to guess the ATA revision supported (if
ATA4 if Ultra-DMA, ATA2 if PIO mode > 2). We can't rely on param.atap_ata_major
here, at last one Ultra-DMA drive claims to support only ATA-3.
Use the ATA version in ata_perror(), and to try a flush cache command
in a shutdown hook for IDE drives.
add handling of a "close all" command
-split out code common with wsdisplay_delscreen() into
wsdisplay_closescreen()
-add ttymodem call to signal a HUP to the application if the screen
is closed
-add flag to force a "clear screen" on close (XXX should actually be
controlled from userland)
-remove checks for existence of "reset" entries in the emulations - this
is required now
reads. This avoids a problem where many writes will cause the driver
to allocate way too much memory.
This needs to change to a queueing system later, which will provide a
way to limit the memory consumed by the driver.
Without these changes, raidframe would use 24M or more on my machine when
the buffer cache dumped all its dirty blocks. Now it uses around 200k
or so.
calls
-support use of 2 fonts simultanously; this costs the ability to
"highlight", ie to use the upper 8 colours
-define screen types "80x25bf" and "80x50bf" which use this ability
-add conditional code to deal with the weird mapping of pcvt's
supplemental fonts
to download fonts and a per-screen call to select a font
allows easier sharing of ressources in the display driver
change the parameters to the load_font driver vector to pass all
available font information
thorpej