scw
9ac6178585
memc attaches at mainbus now.
2001-07-27 18:40:27 +00:00
abs
01b024cd5b
Standardise TCP_COMPAT_42 as commented out, grouped with other COMPAT options,
...
and with the comment '4.2BSD TCP/IP bug compat. Not recommended'
Add commented out 'TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG'
(All hail amiga and atari which make some attempt to automate the
multiplicity of config files...)
2001-07-08 16:32:12 +00:00
scw
35110949ce
Ditch the `simulated' software interrupt in favour of
...
hardware-assisted soft interrupts on all boards.
(Note: VMEChip2-less 162/172 not yet tested)
This greatly simplifies the `rei' path and allows
interrupt nesting to be tracked somewhat more easily.
As a result we now have a working CLKF_INTR() macro
and can detect uvm_fault() being called from an interrupt
(although there may still be a very short race detecting
the latter; need to investigate further).
2001-07-06 19:00:12 +00:00
scw
6d598bac6d
Another instance of the MD siop driver which slipped the net...
2001-07-03 17:36:01 +00:00
christos
0f380fac15
Add an e_trapsignal member to struct emul, so that emulated processes can
...
send the appropriate signal depending on the trap type.
2001-06-18 02:00:48 +00:00
scw
89546c98a1
Enable DHCP and BOOTP as supported diskless NFS boot options.
2001-06-10 14:40:47 +00:00
scw
ea5249214a
Add rnd(4) pseudo-device.
2001-06-10 13:16:07 +00:00
mrg
3783ca5d30
define _KERNEL_OPT as well as _KERNEL. we will use this in the future to
...
get kernel "opt_foo.h" headers, rather than _KERNEL && !_LKM.
2001-05-29 02:20:20 +00:00
scw
d5c72b21e5
s/ncsrc/osiop.
...
While I'm here, ditch some excess baggage which is useless for
the RAMDISK kernel.
2001-05-28 18:39:45 +00:00
scw
eb9637dd7e
Add COMPAT_15 and comment out COMPAT_SUNOS. (It's hardly used and saves
...
a bit of space on low memory models).
2001-05-28 11:14:41 +00:00
scw
ff4a29679f
Switch to the MI 53c710 driver recently committed by Izumi Tsutsui.
2001-04-30 09:05:58 +00:00
fvdl
c7f1462f3e
Add machdep file for procfs. Currently only used for linux-style
...
/proc/cpuinfo (only active when procfs is mounted with -o linux).
For ports other than the i386 this currently produces an empty
string.
2001-01-17 00:07:18 +00:00
bouyer
c71f40d166
Add pseudo-device vlan
2000-12-19 10:42:02 +00:00
jdolecek
cacec11253
delete obsolete comment
2000-12-17 15:52:39 +00:00
scw
a3dc741c03
Delete the commented out EXEC_ELF32 now that it's in std.mvme68k.
...
(Spotted by Simon Burge)
2000-12-09 21:02:09 +00:00
scw
3f7cfb70ef
Add "options COMPAT_AOUT_M68K".
2000-12-07 08:40:06 +00:00
scw
9fc2cc70dc
Include the a.out m68k compatibility module.
2000-12-03 15:40:06 +00:00
scw
2e68384b0c
Back out the previous change after discussion with thorpej and cgd.
2000-12-03 15:38:30 +00:00
scw
bd8955b9b6
Only try to attach those devices which have been configured
...
in the kernel config file.
2000-11-30 22:54:31 +00:00
scw
ba98135ea8
Add EXEC_ELF32
2000-11-30 22:31:27 +00:00
scw
a643cf07a5
Add the memory controller ASIC driver.
2000-11-25 21:46:42 +00:00
scw
46d0d060fd
Oops, missed a trailing comma ...
2000-11-25 21:06:12 +00:00
scw
eff5b700a8
Enable compatibility for earlier releases.
2000-11-25 20:35:32 +00:00
scw
ee58c485bf
Add CD9660, plus some general cleanup.
2000-11-25 19:33:39 +00:00
scw
2aa72fcec2
Include the cd9660 filesystem and cd(4).
2000-11-25 19:21:50 +00:00
scw
5529847b99
Don't base this on the GENERIC config file; there's too much
...
unnecessary bloat in it for an installation kernel.
2000-11-25 19:18:46 +00:00
scw
2129dff0f7
The ramdisk now needs 1024 blocks.
2000-11-24 19:40:15 +00:00
scw
dcd1f30fb8
First cut of a driver for the Memory Controller ASICs found
...
on mvme16x and mvme17x boards.
2000-11-24 09:42:09 +00:00
scw
7bd36d34a1
Use the MI md_root.c.
2000-11-24 08:54:08 +00:00
scw
b6f0a678dd
Add support for the m68060-based machines: MVME-172 and MVME-177.
...
CPU support taken from a combination of NetBSD/amiga and NetBSD/x68k.
At this time, MVME-172 works but MVME-177 is untested. Since the '177
is otherwise identical to the MVME-167, this should *just work*.
2000-11-20 19:35:28 +00:00
itojun
0c84fad435
more rnd(4).
2000-10-04 22:26:49 +00:00
jdolecek
b1f94e26ab
don't specify number of ptys if >= 16 (current default initial number)
...
pty comments: normalize and g/c what is no longer relevant
2000-09-24 15:59:26 +00:00
scw
7f3786d36a
Add preliminary support for the MVME162-LX 200/300 series of boards.
...
Currently, the major onboard devices are supported (disk, network,
rs232 and VMEbus). However, work is still need to support the remaining
devices (eg. IndustryPack sites).
These boards are available with a dazzling array of build options. At
this time, the following options are *required*:
o Real floating point hardware (the 68LC040 model isn't tested),
o The VMEchip2 must be present,
o If offboard VMEbus RAM is not present, at least 8MB of onboard
RAM is required.
o Even if offboard VMEbus RAM *is* present, at least 4MB of onboard
RAM is required. (Boards with 1 or 2MB onboard RAM *can* be
supported with offboard RAM, but not without some funky values in
the VMEbus Master mapping registers.)
There is no support for boards other than those in the -LX 200/300 series.
2000-09-06 19:51:42 +00:00
scw
b77bc217e1
Pull a bunch of common code from vme_pcc.c and vme_two.c into
...
the new mvmebus.[ch] files, and put down some initial code to
deal with VMEbus slave mode.
2000-08-13 17:00:51 +00:00
itojun
85dda25e94
move "options PULLDOWN_TEST" into sys/sys/mbuf.h (in #ifdef _KERNEL),
...
as it is no wthe default setting for everyone.
the reason we still use the name "PULLDOWN_TEST" while it is now default:
kame code sharing.
2000-08-13 01:31:15 +00:00
mason
4a353b5330
Moving to a default of 64 PTYs.
2000-07-27 17:53:35 +00:00
scw
83e678b1a4
Implement generic soft interrupts for mvme68k.
...
Based on Jason Thorpe's Alpha implementation.
2000-07-20 20:40:34 +00:00
itojun
d76ae83df8
add PULLDOWN_TEST for all the platforms.
...
XXX should be moved to somewhere else when stabilized
2000-06-30 17:10:15 +00:00
fvdl
1ee7d22c0b
Remove prefix construction for softdeps. Add SOFTDEP option to GENERIC.
2000-06-22 20:27:49 +00:00
veego
223d7455c7
Remove the obsolete config fragments for kernel crypto, because the IPsec
...
crypto code is now in the kernel source tree.
2000-06-14 22:02:13 +00:00
hubertf
9f48bba3ae
Add "install" target, so "make install" after building the kernel
...
does something useful. The target can be redefined by putting a
install-kernel-${MACHINE_NAME} target that fits your needs into
/etc/mk.conf.
2000-05-09 00:56:21 +00:00
thorpej
6a33c86623
HAVE_GCC28 -> HAVE_EGCS, and make it match gcc 2.9 as well. Also,
...
make the use of -Wno-uninitialized explicit, don't rely on a compiler
hack to do it for us.
2000-05-09 00:32:19 +00:00
bouyer
f1d93978ae
Rename define 'siop' to 'msiop' to avoid clash with machine-indepndant siop
...
driver. Doesn't change the name of drivers in config files.
2000-04-21 16:53:20 +00:00
itojun
3be41bae18
add stf pseudo interface (commented out due to possible security risks)
2000-04-19 06:50:27 +00:00
scw
9c745dbd5e
Merge 'scw_mvme68k_bus_space' branch with the trunk.
...
These changes add support for:
o The MI VMEbus framework on both MVME147 and MVME167.
o Enhancements to the existing MD bus_space(9) implementation.
o Most of the bus_dma(9) API.
2000-03-18 22:33:02 +00:00
oster
1bad2e1909
Add the RAIDframe device major to the machine-dependent config files
...
so that the right entries get added to dev_name2blk[]. Needed for / on RAID.
(Whoops! I missed checking these in when adding the RAID_AUTOCONFIG stuff.)
2000-03-14 15:56:51 +00:00
tsutsui
11c8f56d48
Revert STRIPPROG -> STRIP
2000-02-01 05:25:24 +00:00
tron
04eb110431
Add "dependall" target for comfort.
2000-01-24 20:36:06 +00:00
hubertf
7e5ff67457
Add commented out "ident"-command
2000-01-23 23:46:04 +00:00
tsutsui
e61f177ab1
STRIP -> STRIPPROG
2000-01-19 16:29:54 +00:00