to extract the physical address from the virtual.
On the ARM, also use the "read-only at MMU" indication to avoid a
redundant cache clean operation.
Other platforms should use these two as examples of how to use these
new pool/mbuf features to improve network performance. Note this requires
a platform to provide a working POOL_VTOPHYS().
Part 3 in a series of simple patches contributed by Wasabi Systems
to improve network performance.
objects. Clients of the pool_cache API must consistently use
the "paddr" variants or not, otherwise behavior is undefined.
Enable this on Alpha, ARM, MIPS, and x86. Other platforms must
define POOL_VTOPHYS() in the appropriate manner in order to enable
the feature.
Part 1 of a series of simple patches contributed by Wasabi Systems
to improve network performance.
cache based on CPU id. write-through on PXA2[15]0 B2 stepping and
earlier. write-back on C0 and C1 stepping (a.k.a PXA2[15]5 A0)
options XSCALE_CACHE_WRITE_{THROUGH,BACK} can override it.
for other XScale CPUs than PXA2xx, XSCALE_CACHE_WRITE_THROUGH works
same as before.
* The offset format was wrong.
* There is no post-increment or index register update.
* It wasn't even matching because the mask was wrong.
Also touch up ldr/str disassembly slightly.
too many bits (including some reserved ones) and was writing the wrong value
for the TLB flush.
Also, if the flag is off, don't write the control register!
indirect configuration (because the BECC is a soft-core, it could
have a variety of peripherals in the FPGA). Also add support for
local untranslated DMA.
of cycles off the syscall overhead.
Since all COMPAT_LINUX platforms now support __HAVE_SYSCALL_INTERN,
garbage-collect the LINUX_SYSCALL_FUNCTION stuff.
- to identify device instance, using hardware address.
- when console accesses device, using statically mapped address.
- when tty accesses device, using handler given by bus_space_map().
int's to unsigned int/u_int where they shouldn't go negative.
int's to boolean_t's where they're being used as bools.
No real functional change (in the produced asm a few condition codes changed)
no need device ixpcom in evbarm/conf/files.evbarm move it to
arm/ixp12x0/files.ixp12x0
ixp12x0_com.c:
some fix around address handling
1. Do not call bus_space_map() in ixpcominit(). Calling bus_space_map()
is not safe here, because bus_space_map() calls uvm_km_valloc() but
uvm is not yet initialized.
2. Use dv_unit to determine console instead comparering iobase.
Now you can attach ixpcom0 with physical address like this:
ixpcom* at ixpsip? addr 0x90000000 size 0x4000
Statically mapped address (0xf0000000) is still usable.
ixp12x0_clk:
1. access PLL_CFG register via bus_space
2. Make the delay() working correctly. (bug fix)
3. Start the timer device without interrupt on attach time.
Now delay() called before cpu_initclocks() works fine.
ixp12x0_pci:
1.Mapping PCI type0/1 configuration space to the upper address.
2."PCI I/O Cycle Access" mapping to same virtual address(VA==PA)
but size of this mapping increase to 1MByte because fails
cause couldnt set L2 table.
3.use bus_space address handling in ixp12x0_pci.c.
