28bc4dfeca
Oops; PCIC_INTR_ENABLE does something *very* different.
1999-02-19 03:14:00 +00:00
f2c4e7f8bd
Use the correct interrupt sharing type, and set PCIC_INTR_ENABLE(!).
1999-02-18 23:41:40 +00:00
18e341a954
Add separate halt_input and halt_output methods in ad1848_isa, which disable
...
the DMA channel.
1999-02-18 17:27:39 +00:00
9907eda026
spaces -> tabs
1999-02-18 16:09:01 +00:00
81bc49921a
Remove some superfluous softc elements.
1999-02-18 15:47:29 +00:00
5e2fc07a14
Add separate halt_output and halt_input routines.
1999-02-18 07:08:35 +00:00
27963c294a
Use the trigger interface, and clean up a pile of cruft.
1999-02-17 23:05:28 +00:00
71105fbda7
Update comments.
1999-02-17 21:44:55 +00:00
7741cae143
Fix slight ommission in previous.
1999-02-17 02:43:13 +00:00
e5f5e628d2
Pass the direction to the allocm and round_buffersize methods.
...
Some drivers need this to properly allocate DMAable memory.
1999-02-17 02:37:38 +00:00
88ad3aa42b
If we have an 8-bit DRQ, always pass that to isa_malloc().
1999-02-17 01:22:47 +00:00
2c7fa23c38
Fix Copyright dates
1999-02-16 23:34:10 +00:00
dc068e0d1f
Assign my files to The NetBSD Foundation, Inc.
1999-02-16 22:46:55 +00:00
56f2d188fc
RCS ID police
1999-02-15 04:54:34 +00:00
f6f9f8a965
Change DIOCEJECT to do what's needed to eject a device before the eject
...
command (unlock for sd and cd) if no other partitions are open, return
EBUSY otherwise. DIOCEJECT will have the old semantic if its argument is not
0. The old ioctl has been renamed to ODIOCEJECT for binary compatibility.
1999-02-08 16:33:16 +00:00
1eba733d91
remove dummy "load_font" entries
1999-01-11 21:35:54 +00:00
5c5590465e
Avoid `void *' arithmetic. Fixes PR 6783.
1999-01-10 21:57:19 +00:00
0d32a9a78b
Fix more `void *' arithmetic.
1999-01-08 19:22:34 +00:00
332d7c138f
Avoid arithmetic on `void *' since that's not ANSI C.
1999-01-08 18:10:35 +00:00
bbe8b4dde5
Add Byte Runner Technologies TC-400 and TC-800 driver from Eric S. Hvozda
1998-12-16 11:33:50 +00:00
2e89d55ed4
Deal with an unusual response on port selftest commands. This makes at
...
least John Kohl's crappy Dell box work.
1998-12-14 13:54:25 +00:00
95aa0d0b7d
Simplify the copy loops a bit.
1998-12-12 16:58:10 +00:00
7a9cc5bfbc
Update for changed scsipi_xfer struct.
1998-12-09 08:37:50 +00:00
1b499d8ce6
Make the OPL information string more informative.
1998-12-08 14:26:56 +00:00
74bc9f26d5
Update HBAs to incorporate the new max_lun property.
1998-12-05 19:43:33 +00:00
8f7f8d557d
made prototype for debug function wss_dump_regs match its definition.
1998-12-05 10:49:24 +00:00
47ab212504
Rename pio_mode, etc ... to PIO_cap, etc ... for consistency with the
...
ata_drive_datas struct. Suggested by Soren S. Jorvan.
1998-12-03 18:24:30 +00:00
7c72f9361b
Change comment about isa_intr_establish() as discussed on tech-kern.
1998-11-30 12:57:10 +00:00
246a68a003
Add support for `AdLib NSC 16 PNP' as wss, joy.
...
Record source selection needs work.
1998-11-26 21:45:13 +00:00
9726cfd1fb
Make the copyright header conform to the NetBSD template.
1998-11-25 22:17:06 +00:00
3357fbeefb
Minor format change.
1998-11-25 13:39:37 +00:00
0800aaa223
Move the `wdc' device into `conf/files'.
1998-11-22 21:57:47 +00:00
3e38051bc5
in wdc_softc: access the per-channel data via a pointer array instead of
...
an array of fixed-sized channel_softc elements. This way IDE controllers
which more than 1 channel (pciide) can extend the channel data easily
for private needs.
To avoid the double dereference at runtime, change the argument of
wdcstart() to the channel data pointer instead of the array index.
1998-11-21 15:41:41 +00:00
3b068a6c78
Adapt to the new scsipi_adapter interface.
1998-11-19 21:53:32 +00:00
db3051d720
fix problems in many d_mmap routines:
...
- returned EOPNOTSUPP rather than -1.
- no check for negative offset.
many of these fix potential security problems in these drivers.
XXX XXX XXX
the d_mmap cdev routine should be changed to have a prototype like:
paddr_t (*d_mmap) __P((dev_t, off_t, int));
by someone!
1998-11-19 15:38:20 +00:00
fade033791
Print out which IRQ is being used for which slot, when the interrupts
...
are established.
1998-11-16 22:35:18 +00:00
5ab6a8555e
Fix one last bug in the multicast filter calculation.
...
sdr and vic work now, at least.
1998-11-13 09:37:46 +00:00
b8974fbf40
Fix yet another bogon in the multicast filter calculation.
1998-11-12 13:03:51 +00:00
7b10c3e7e4
Add the 'ex' driver, a DMA driver for 3Com 90x and 90xB cards. Rename
...
constants from EP_ to ELINK_ since they're now used in the ex driver as well.
1998-11-04 00:29:28 +00:00
1cfb41e0d6
make this compile again (missing semi-colon)
1998-11-01 01:04:48 +00:00
d08eb2a32b
Add code to detect a RealTek 8019 chip, and use the media selection
...
support if present.
1998-10-31 01:44:16 +00:00
56066ad5fb
Add media list, media list count, and default media arguments to
...
ne2000_attach().
1998-10-28 00:13:47 +00:00
925077cfb9
Holy smokes, batman! Actually fill in the "init_card" entry point!
1998-10-27 22:45:13 +00:00
ffe41a4f8f
Remove unused sc_iot/sc_ioh fields.
1998-10-25 23:48:56 +00:00
d4e6677111
Replace architecture-dependent tag/handle field names with
...
architecture-independent versions.
1998-10-25 23:48:29 +00:00
6e73d89afc
PR/6274: John Ruschmeyer: Add isa/i386 ncr53c80 driver.
...
XXX: Needs work. We need to fix the probe/find goo, and add support for the
pas16 cards.
1998-10-25 18:41:56 +00:00
ee042cb008
Disable the I/O address, DRQ and IRQ validation; assume that the config file
...
is sane.
1998-10-15 04:05:53 +00:00
19fddaeeb5
Merge bouyer-ide
1998-10-12 16:09:10 +00:00
44d4d6a60a
Call correct ad1848 attach routine. Fixes PR 6269.
1998-10-11 17:02:36 +00:00
29d472f53d
Garbage-collect the open_target_lu and close_target_lu entry points from
...
struct scsipi_adapter; they were not used.
Add a scsipi_ioctl entry point to struct scsipi_adapter. This will be
used to issue ioctl commands to the host adapters.
Inspired by PR #6090 , from Matt Jacob.
1998-10-10 00:28:28 +00:00
bd7db8ba8a
Enable early probe stage printf's not by DIAGNOSTIC but more driver
...
specific macro constants.
1998-10-07 04:58:06 +00:00
b03b63aef4
Make these files compile again; no longer necessary to pass
...
iobase to comprobe1.
1998-09-18 14:38:48 +00:00
95807e512a
Garbage collect unused 3rd parameter to comprobe1().
1998-09-16 21:30:58 +00:00
ea4898c76c
Add arc as a target platform.
1998-09-11 19:39:28 +00:00
4f9a0d0550
Add mmap support for gus and gusmax, PR #5988 , Feico Dillema.
1998-09-09 04:40:34 +00:00
1247373b7a
Correct the remaining uses of ad1848_softc to ad1848_isa_softc
1998-09-06 13:03:49 +00:00
06f777a3fe
Debug output updates (Ezra Story; PR#6108).
1998-09-06 11:06:52 +00:00
7991c56b93
Use `ad1848_isa_{open|close}' (Ezra Story; PR#6108).
1998-09-06 11:05:21 +00:00
fc5e533cc2
Relinquish my copyright claim on this file.
1998-09-05 17:23:09 +00:00
c7a4282124
Assign copyright to TNF.
1998-09-05 14:12:36 +00:00
92707994ef
use ad1848_isa_attach, so GUS cards with CS4231 don't panic the kernel
1998-09-01 18:48:38 +00:00
d58173741d
kill the last remnants of __BROKEN_INDIRECT_CONFIG. (only the pica port
...
used it, and it's non-working and apparently slated for replacement.)
1998-08-31 22:28:04 +00:00
61cf67759a
make AUDIO_DEBUG work again
1998-08-29 22:49:48 +00:00
7972a062b0
Make the OPL driver attach directly to ISA as well.
1998-08-26 13:33:59 +00:00
8d64ea1683
Less debug printing.
1998-08-26 13:08:44 +00:00
bb3c56652c
Make the OPL driver turn on the sound on sound cards that require it.
...
That makes it much more likely that we get any sound. DUH!
1998-08-26 12:10:22 +00:00
2ffb54bdcc
Split the AD1848 driver into MI (dev/ic/ad1848.c) and ISA parts.
1998-08-25 22:34:29 +00:00
a48f7d8a24
Attach the OPL FM synth to the ESS driver.
...
It probes, but alas, no sound.
1998-08-25 12:52:47 +00:00
c7e036f6e2
Let opl attach to ess.
...
WARNING: it doesn't work yet.
1998-08-22 22:55:09 +00:00
915f1fe566
Add missing __P
1998-08-20 10:46:10 +00:00
0e6f209f9d
Add forgotten OPL file.
1998-08-18 17:56:39 +00:00
cd09067eb4
* Redo the way the way the MIDI driver attaches to audio devices.
...
* Improve the midisyn layer a little.
* Add a driver for the Yamaha OPL[23] FM synths.
The opl driver is not finished yet; it sounds pretty awful.
For some strange reason I cannot get any FM sound from my SB64 cards,
but a regular SB16 works fine.
1998-08-17 21:16:09 +00:00
d07b3639a4
Assign my copyrights to TNF.
1998-08-15 17:47:15 +00:00
62b1bf3e2e
Assign my copyrights to TNF.
1998-08-15 10:51:16 +00:00
6dc903202f
Assign my copyrights to TNF.
1998-08-15 10:10:47 +00:00
129cbf95ee
Minor edit.
1998-08-15 05:16:41 +00:00
b2827b9d36
Assign copyright to TNF.
1998-08-15 04:16:55 +00:00
df9baf2311
Assign copyrights to TNF.
1998-08-15 03:51:30 +00:00
6d3d8a1350
Make copyright notices with my name consistent.
1998-08-15 03:02:31 +00:00
183442fe73
Emulate ulinear_be using slinear_be on later chips.
1998-08-14 00:49:23 +00:00
f750a7d47e
device ess was listed twice
1998-08-13 04:53:18 +00:00
a2dd74ed79
Merge paddr_t changes into the main branch.
1998-08-13 02:10:37 +00:00
58e0098fef
Shut up after close().
1998-08-12 21:36:21 +00:00
5c76b6a944
The mic preamp is really a property of the input stage, and affects both
...
pass-through and recording.
1998-08-12 19:13:14 +00:00
b170caf730
Completely rewrite media selection. Add support for the MII/PHY on
...
the 3Com 3c905-TX and 3c905-T4. Fix handling of the MII on the
3c595-MII and 3c597-MII (can't talk to the PHYs on these cards; just
use "manual" for the external MII port).
Fixes kern/4782 (Chris Demetriou).
1998-08-12 18:51:52 +00:00
fa39959a5e
Add a MIDI driver for the PC speaker. This is mostly of hack value,
...
but, hey, lotsa people got a MIDI device now! (A truly pitiful one. :-)
1998-08-12 18:16:36 +00:00
881b4053a6
Remove some white space.
1998-08-12 18:15:04 +00:00
3979b06d00
enhanced -> preamp
1998-08-12 03:18:34 +00:00
1f5c14d8ef
ess_audio_channel:active is now used even when DIAGNOSTICS is not defined.
1998-08-11 12:16:22 +00:00
a6e73a5576
Actually set all the logical filter bits. Doh!
1998-08-11 05:57:40 +00:00
271d3df6f3
Fix an obvious bug that caused the multicast filter to always be all 0s.
1998-08-11 04:18:25 +00:00
8ba8e2056b
Remove unused field (sc_ih) in ess_softc (interrupt handlers are kept
...
in a per-direction structure).
1998-08-10 20:24:26 +00:00
b034eb97bf
Fix typo.
1998-08-10 20:02:48 +00:00
7fca135b1b
Use the new trigger interface.
1998-08-10 15:32:18 +00:00
060f81eb62
Minor change.
1998-08-10 02:19:18 +00:00
93703857ca
Slow down, Wilbur.
1998-08-10 02:13:44 +00:00
7514d511f7
Fix a typo I introduced in the MIDI code.
1998-08-10 02:12:30 +00:00
8d77cae1b4
For models prior to the SB16, there is only one clock divider, so couple the
...
sample rates. However, only do this if both play and record are being used
simultaneously; otherwise we can't play 22KHz on the SB1.
1998-08-10 01:25:33 +00:00
3dcff6581b
Use the new trigger_{in,out}put interface.
...
Also, even on the SB1, we can leave the DMA controller in auto-initalize
mode and just send a command to the board for each block. This may help
prevent FIFO underruns.
1998-08-10 00:20:39 +00:00
b4e0bf5dfb
Use 4- and 8-byte DMA transfers.
1998-08-09 06:52:57 +00:00
0611fc34f8
Don't actually touch the hardware in set_params; defer that until we actually
...
start a transfer. Instead, just check that the parameters are valid.
Also, use 16-bit output for u-law and a-law.
1998-08-09 06:38:30 +00:00
5eba82397c
Oops; fix typo.
1998-08-09 04:59:55 +00:00
017b9af5fe
Clarify with a specific reference to the manual page in question.
1998-08-09 04:58:08 +00:00
12f5a41e1f
Make the previous slightly more robust, and set AUDIO_PROP_INDEPENDENT.
1998-08-09 04:40:55 +00:00
c8532af3b2
Make sure the sample rate is the same on both channels, tracking the change
...
from one channel to the other if only one is active.
1998-08-09 04:14:47 +00:00
759ca5ee0c
The manual says to use the other crystal for 22050Hz.
1998-08-09 03:48:42 +00:00
565adbaffb
Set the FIFO control bits correctly so that stereo recording works.
1998-08-09 02:54:50 +00:00
80457a2c65
Use auto-initialize DMA for recording.
1998-08-09 02:05:52 +00:00
e2686d0a1b
Use splnet, not splimp.
1998-08-08 23:51:39 +00:00
c49235f44c
Use splnet(), not splimp().
1998-08-08 23:44:12 +00:00
254afcaecb
Sleeping forever kinda sucks.
1998-08-08 21:37:00 +00:00
17932f0575
Set the correct modes for the record channel.
1998-08-08 20:55:36 +00:00
558733ffc6
Track our carrier status and report it in the media status callback.
1998-08-07 05:55:14 +00:00
7b044dea51
Make the irq checking logic somewhat less bogus.
1998-08-07 00:51:06 +00:00
48bae9ee88
Add MIDI support. The MIDI devices can be accessed as ``raw'' through
...
the /dev/rmidiN devices, or with a sequencer interface via /dev/music.
So far the only supported MIDI device is the MPU401 port on SoundBlaster
(and only on SB on isapnp, since we do not have locators with multiple
values yet).
1998-08-07 00:00:55 +00:00
0c6791d804
Add macro to test iobase validity.
1998-08-05 16:40:22 +00:00
f76fb48283
Use looping DMA for play channel.
...
More cleanup.
1998-08-04 13:14:42 +00:00
ce69d417a2
Make it compile without DIAGNOSTIC
1998-07-31 23:54:09 +00:00
6b407a79c6
Major cleanup of the ESS driver. It now sorta works. More to come.
1998-07-31 15:17:17 +00:00
75db93cec2
Pull in files.isapnp here; the two busses are linked together quite closely
...
(more than we'd like maybe, but don't we wish ISA didn't suck...)
1998-07-31 04:40:39 +00:00
11c3d96b49
Flush spurious #endif after ADDMULTI
1998-07-31 01:10:13 +00:00
bf52ef5697
Squash unused variable.
1998-07-30 22:17:34 +00:00
ae2fb64e3a
Document supported boards near the top of the driver source code.
1998-07-30 21:28:15 +00:00
b7a585b61d
Use the previously committed pnp hook.
1998-07-30 18:03:34 +00:00
8bd9c69e11
Multicast support.
1998-07-30 16:40:19 +00:00
cdeb158d5f
A first stab at making the SHARK sound work. It doesn't really work
...
yet, but it probes and makes a noise when used. Stay tuned!
1998-07-30 14:11:42 +00:00
d6a8a4f025
Don't print chip name in attach, the ad1848 attach already does.
1998-07-29 11:39:25 +00:00
20f454ae1c
KNFify.
1998-07-28 20:58:39 +00:00
a374ab61d8
ic/i82595reg.h
1998-07-28 16:02:34 +00:00
4fb93c48ec
Remove dead code.
1998-07-28 14:44:46 +00:00
daed8d7ce1
Fix obsolete code in waiting for calibration on the ad1848.
...
(Sigh, the ad1848 driver should be rewritten.)
1998-07-28 12:13:34 +00:00
e3eed5f706
Fix cfattach naming botch.
1998-07-27 18:27:36 +00:00
0f7ec45c46
Add CS8900 Ethernet driver, and ISA front-end.
1998-07-27 01:22:41 +00:00
e9128957a6
ISA front-end for CS8900 driver.
1998-07-27 01:20:43 +00:00
f68dfbe928
Sigh, make this work with the i386 bus_space functions (which have debugging
...
glue in them, and thus subtle syntax quirks).
1998-07-27 01:20:19 +00:00
2d588abad8
Split up the Shark CS8900 driver into front-ends and core back-end (which
...
is here, since the chip can only live on an ISA bus; only the autoconfig
glue is different).
1998-07-27 01:08:51 +00:00
930937fd49
Define the CS8900 memory size, and macros to test for valid memory
...
base and IRQ.
1998-07-25 00:41:47 +00:00
658e297dd6
Initialize the new "dispoffset" (but don't use it for anything fancy).
1998-07-24 16:22:51 +00:00
8ba3494f9a
Deal with new pool code's changed API by rewriting this to not use pools.
...
Instead, use a manually maintained freelist in a second tailq.
Uses less data space, looks more symmetrical.
1998-07-24 03:29:29 +00:00
8d611b5f32
Remember the product ID and revision.
1998-07-23 19:25:52 +00:00
d2bc077edb
G/c a now unsed config flag.
1998-07-23 19:03:11 +00:00
c4c3297772
update comment ("John F. Woods" <jfw@funhouse.com>, PR kern/5798)
1998-07-23 16:39:24 +00:00
02ad0b4eda
Add support for ifmedia.
1998-07-21 22:58:31 +00:00
d3882c1b56
Define autonegotiation bits.
1998-07-21 22:27:33 +00:00
3db796d287
Define a couple more of the PacketPage registers.
1998-07-21 22:04:13 +00:00
88a0132aec
Correct the name of the CS8920M id, and fix some whitespace lossage.
1998-07-21 19:54:19 +00:00
49bb9d8214
adapt to LANCE driver split
1998-07-21 17:36:01 +00:00
3780fa036e
Add RCS IDs.
1998-07-21 07:48:36 +00:00
0611893e60
Move the cs8900 driver's softc, etc. definitions to an MI location.
1998-07-21 01:04:01 +00:00
0987caaee6
G/c unused definition.
1998-07-21 00:39:21 +00:00
mycroft