Otherwise shseat->focused_ivisurf can point to deleted memory.
This does not happen with the hmi-controller because it explicitly assigns a new
focused surface. But the ivi-shell should not relay on the controller here.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Activate when a surface is created and change focus when an active
surface is removed. The Surface is added to layers when it is created,
because it must be added to a layer to be active.
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
The keyboard focus is active, but the desktop surface itself is not
displayed as active. Therefore, the surface should also be displayed as
active, as in kiosk-shell.
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
Add to handle seet hotplugging so that seats are properly picked up by
ivi-shell when they are dynamically created.
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
Most of these don't use the parameter that changes at all, but some get
a nice simplification.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
If the compositor is disabling a weston_output,
weston_head_from_resource can return NULL, so the return code must be
checked where used.
Fixes#638
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
There is no need to manually schedule a repaint anymore, it will be
triggered by changes to opacity or transform.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Use the weston_view_move_to_layer() helper instead of calling
weston_layer_entry_insert() / weston_view_unmap() directly.
This requires us to stop just clearing out the layer view list and then
adding visible surfaces' views to it. Instead, we have to explicitly
move all views onto or off of the layers.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Stop manipulating the view->geometry.transformation_list directly and
replace weston_view_geometry_dirty() and weston_view_update_transform()
calls with weston_view_add/remove_transform().
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Move the destroy listener registration to the top, to avoid having
to call hmi_controller_destroy() for cleanup when it fails.
This would segfault trying to remove the destroy listener from a list
when its link was never initialized or inserted into any list.
The failure case can be hit by setting both modules=hmi-controller.so in
weston.ini and --modules=hmi-controller.so on the command line.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The surface buffer must be committed before a ivi-controller adds ivi
surface to a ivi layer. This constraint is necessary information for the
ivi-controller.
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
Use assert() to check for invalid NULL arguments. Something like that happens
during development and assert() makes it easier to find the error. And it avoids
unnecessary additional error handling.
The hmi-controller asserted anyways so this just moves the assert on level
deeper. Other controller probably do the same thing, or don't check the return
values at all.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
The return values for most of the API functions will be removed and replaced by
asserts. So remove the return value checks. The end result will be the same:
These functions only fail for incorrect API usage, so basically the asserts are
moved from the hmi-controller into the shell.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
The surface of the focus_view may be a subsurface. So get the corresponding main
surface first.
Without this get_ivi_shell_surface(), will cast committed_private (which is a
weston_subsurface object) to ivi_shell_surface. Weston crashes shortly
afterwards.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Input panels are used for complex text composition for CJK alphabets and for
onscreen keyboards. Support for this is already implemented in libweston and
the desktop shell.
This adds extends the IVI shell to add support for input panels as well. The
low-level parts are implemented in the IVI shell. The positioning of the input
panels is delegated to the controller.
Support for input panels and the relevant protocols is only enabled if the
controller attaches a listener to the new signals.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
This makes it possible for the controller to distinguish different surface
types. For IVI and desktop surfaces, this is not all that useful, but it will be
needed for a new surface type: input panels.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
shell_surface_send_configure() should only be called for ivi surfaces. Other (or
no) *configure() calls are needed for other types of surfaces.
Make sure that get_ivi_shell_surface() returns NULL if the surface is not an ivi
surface. And don't ignore wrong surfaces but assert instead to make it obvious
that new surface types need special handling in ivi_layout_surface_set_size().
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
I also snuck in a trivial change to drag_surface_configure at the same
time to avoid yet another micro patch.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Convert the bare x,y coordinates into struct weston_coord and update all
users.
We keep the surface position in wl_fixed_t for now so it still exactly
matches the position most recently sent to clients.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
ivi-shell has allowed to notify a surface configuring when detecting
an unmapping commit. To avoid the commit_change with source_width
and source_height are zero, we should don't do a configuring when
surface has no content.
Signed-off-by: Tran Ba Khang(MS/EMC31-XC) <Khang.TranBa@vn.bosch.com>
If a client commits a null buffer, weston will unmap all the views of
the surface and marks it is unmapping. In the case, the client commits
a new valid buffer, then the controller wants to rebuild the views
without applies the pending properties of surfaces and layers.
The ivi_layout_interface should prodive an interface for this.
Suggested-by: Michael Olbrich's avatarMichael Olbrich <m.olbrich@pengutronix.de>
Suggested-by: K J Rajendraprasad's avatarRajendraprasad K J <KarammelJayakumar.Rajendraprasad@in.bosch.com>
Signed-off-by: Tran Ba Khang(MS/EMC31-XC) <Khang.TranBa@vn.bosch.com>
Both functions are callbacks that are added when the ivi_shell_surface is
created and removed when it is destroyed, so get_ivi_shell_surface() will never
return NULL here.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
The weston_surface passed to surface_create() should never be NULL. And other
code already relies on that anyway, so just remove the check.
Now surface_create() will never fail, so more checks can be removed.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Various shells provide the functionality to take screenshots using the
weston-screenshooter or a key combination. This is useful on the ivi-shell, too.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Listening the shell destroy instead of compositor destroy signal.
This show how to in case the controller depends on shell resource.
The order destroying had changed in this commit, the controller
is destroyed first now
Signed-off-by: Tran Ba Khang(MS/EMC31-XC) <Khang.TranBa@vn.bosch.com>
The surface listeners must remove when hmi-controller destroying.
To avoid to use after free.
Suggested-by: Marius Vlad <marius.vlad@collabora.com>
Signed-off-by: Tran Ba Khang(MS/EMC31-XC) <Khang.TranBa@vn.bosch.com>
In the case the controlelrs are depended on ivi-shell resource,
it must be destroy before the ivi shell destroy. To do this,
add new ivi shell destroy signal on ivi shell, emit it on
the begining of the shell destroying
Suggested-by: Harsha M M <harsha.manjulamallikarjun@in.bosch.com>
Suggested-by: Michael Olbrich <m.olbrich@pengutronix.de>
Suggested-by: Marius Vlad <marius.vlad@collabora.com>
Signed-off-by: Tran Ba Khang(MS/EMC31-XC) <Khang.TranBa@vn.bosch.com>
To avoid the following UAF:
Invalid read of size 8
at 0x4AE5EFF: weston_desktop_get_display (libweston-desktop.c:110)
by 0x4AEB2C9: weston_desktop_xdg_surface_schedule_configure (xdg-shell.c:1160)
by 0x4AEA77A: weston_desktop_xdg_toplevel_set_size (xdg-shell.c:711)
by 0x4AE839D: weston_desktop_surface_set_size (surface.c:504)
by 0x63F7D43: ivi_layout_surface_set_size (ivi-layout.c:1599)
by 0x63F949F: transition_move_resize_view_destroy (ivi-layout-transition.c:311)
by 0x63F9397: layout_transition_destroy (ivi-layout-transition.c:259)
by 0x63F8E0B: ivi_layout_remove_all_surface_transitions (ivi-layout-transition.c:121)
by 0x63F4BC1: ivi_layout_surface_destroy (ivi-layout.c:258)
by 0x63F38AF: layout_surface_cleanup (ivi-shell.c:162)
by 0x63F3D2D: shell_destroy (ivi-shell.c:359)
by 0x4AF059A: weston_signal_emit_mutable (signal.c:62)
Address 0x174202d0 is 0 bytes inside a block of size 152 free'd
at 0x484617B: free (vg_replace_malloc.c:872)
by 0x4AE5EDC: weston_desktop_destroy (libweston-desktop.c:97)
by 0x63F3CF2: shell_destroy (ivi-shell.c:355)
by 0x4AF059A: weston_signal_emit_mutable (signal.c:62)
by 0x4ACBC2C: weston_compositor_destroy (compositor.c:8629)
by 0x4864A4B: wet_main (main.c:3908)
by 0x10915D: main (executable.c:33)
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Shutting down the compositor gives us:
Invalid write of size 8
at 0x4B1AEDB: wl_list_remove (wayland-util.c:56)
by 0x4AF05BF: weston_signal_emit_mutable (signal.c:66)
by 0x4ACBC2C: weston_compositor_destroy (compositor.c:8629)
by 0x4864A4B: wet_main (main.c:3908)
by 0x10915D: main (executable.c:33)
Address 0x17435f20 is 224 bytes inside a block of size 384 free'd
at 0x484617B: free (vg_replace_malloc.c:872)
by 0x17718C7E: hmi_controller_destroy (hmi-controller.c:761)
by 0x4AF059A: weston_signal_emit_mutable (signal.c:62)
by 0x4ACBC2C: weston_compositor_destroy (compositor.c:8629)
by 0x4864A4B: wet_main (main.c:3908)
by 0x10915D: main (executable.c:33)
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
listen the signal and destroy the screen
corresponding to the destroyed weston_output.
clear also pending and order layer lists and
unmap all active views on the screen.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
The controller should decide what to do with the views. It can
destroy the views or move the view to other screen. So, don't unmap
the views on the destroy screen event in ivi-layout. Removing typecast
Signed-off-by: Tran Ba Khang(MS/EMC31-XC) <Khang.TranBa@vn.bosch.com>
listen the signal and create new ivi screens.
this is required to handle hotplug events.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
don't need to check the output in event, remove the typecast
Signed-off-by: Tran Ba Khang(MS/EMC31-XC) <Khang.TranBa@vn.bosch.com>
The controller sets the source and destination rectangles for any surface,
based on these parameters configure event is sent from the client application.
The controller commit the properties in the initial time, so
the view mask is capped to the current buffer dimensions of the
client. In runtime the client maybe sends some the bigger
configures of buffers. In this case view mask will be of smaller
dimension compared to the client buffer and it results in un-desired
clipping of client buffer.
To resolve this, use source rectangle as view mask. weston will take
care to clip the boundingbox of view to client buffer dimension if the
view mask is smaller.
Signed-off-by: Harsha M M <harsha.manjulamallikarjun@in.bosch.com>
The ivi-shell keeps track of its surfaces by adding them to the ivi_surface_list
to be able to remove them on shutdown. It also creates an ivi_layout_surface for
a desktop surface, but does not keep track of these surfaces.
During compositor shutdown, libweston prints the following message:
BUG: finalizing a layer with views still on it.
Fix it by adding the created ivi_layout_surface to the ivi_surface_list to
remove the surfaces from the layer during shutdown.
Furthermore, remove the ivi_layout_surface from the desktop surface and free it
when the desktop surface is destroyed.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
It's ok if the rectangle is too large: If the calculation fails, the
bounding rectangle is used anyways. However, a rectangle that is too small
will create incorrect results. So make sure to round all edges outwards.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
If a controller requests the layers under a surface that has no views attached,
Weston crashes since it tries to free the array that would be used to return the
found layers, but has not been allocated before.
Free the ppArray only if it was allocated in ivi_layout_get_layers_under_surface
before and no layers were found.
While at it, make it obvious that checking the length is an integer comparison
by comparing it to 0.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
There is no need to call layer_add_surface() in mode_random_replace()
because the surface has already been added to the layer. Rather, calling
layer_add_surface() has the issue that the child surface is displayed
below the parent surface.
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
Activate keyboard focus for surfaces created with xdg-shell protocol. If
the surface has child surface, the child surface is activated instead of
the parent surface.
Fixes: #630
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
With commit 'Move libweston-desktop into libweston' we've moved out
libweston-desktop DSO into libweston. Move also the header to
libweston/desktop.
This removes removes the libweston-desktop pc file and bumps libweston
major version to 12.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
The README for the IVI-shell is completely outdated.
Update the documentation, add some more information on the IVI-shell use cases
and explain how to use and customize the IVI-shell. Also convert the file to rst
and move it to doc directory next to the kiosk-shell documentation.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
The at.projects.genivi.org domain redirects to wiki.covesa.global and the
referenced wiki entry does not exist anymore. Remove it from the comment.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
