wp_viewporter spec requires protocol errors when the viewport is outside
the buffer area.
The viewport is checked in wl_surface.commit handler as the error needs
to be delivered as a reply to the commit, not at state apply time later
(e.g. with synchronized sub-surfaces, or at render time).
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
If a client destroyed the wl_surface before the wp_viewport, Weston core
would access freed memory, because the weston_surface pointer stored in
the wp_viewport wl_resource's user data was stale.
Fix this by setting the user data to NULL on wl_surface destruction. It
is specifically about wl_surface and not weston_surface destruction,
because this is about client-visible behaviour. Something internal might
keep weston_surface alive past the wl_surface.
Add checks to all wp_viewport request handlers.
At the same time, implement the new error conditions in wp_viewport:
calling any request except destroy must result in a protocol error.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
The stable version of the scaling and cropping extension is found in
wayland-protocols as viewporter.xml.
Remove scaler.xml as nothing uses it.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Use wp_viewporter instead of wl_scaler and rename things as appropriate.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Use wp_viewporter instead of wl_scaler and rename things accordingly.
Since interface versions were reset, there is no need to check the
interface version anymore, and the wl_scaler.set request disappeared.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Since the interface is now called wp_viewport, rename functions from
"scaler" to "viewporter" as well.
scaler_surface_to_buffer() is renamed to viewport_surface_to_buffer()
because it is more about viewport than viewporter.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Migrate from wl_scaler to wp_viewporter extension. The viewporter.xml
file is provided by wayland-protocols.
This stops Weston from advertising wl_scaler, and advertises
wp_viewporter instead.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
[Pekka: fix wayland-protocols requirement]
When an output permanently changes its resolution, the output on the right
should be moved accordingly. We also add an event for output resizing so that
plugins can react when an output is resized.
Signed-off-by: David Fort <contact@hardening-consulting.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Releasing a seat is not safe, so let's just announce it without keyboard
and mouse until this is fixed. Without this patch we just can't reconnect on
the RDP compositor as it crashes.
v2: fixed the leak of the xkb_keymap
Signed-off-by: David Fort <contact@hardening-consulting.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Sam Spilsbury <smspillaz@gmail.com>
There is no need to pass the backend name string to these functions
anymore.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Giulio Camuffo <giuliocamuffo@gmail.com>
Change weston_compositor_load_backend() to use an enum to choose the
backend.
The caller no longer needs to know what the backend DSO is called in the
file system. Custom backends cannot be laoded anymore, as the loading
path is now always either LIBWESTON_MODULEDIR, or formed from
$WESTON_BUILD_DIR.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Giulio Camuffo <giuliocamuffo@gmail.com>
Backends do not have access to command line elements nor weston_config
anymore. They use the backend-specific config APIs now.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Giulio Camuffo <giuliocamuffo@gmail.com>
Move load_backend_new() from main.c to weston_compositor_load_backend()
in compositor.c.
This makes libweston load its own backends without leaking the details
to the user.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Giulio Camuffo <giuliocamuffo@gmail.com>
Not used anymore, all backends are loaded through the new method.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Giulio Camuffo <giuliocamuffo@gmail.com>
This commit also adds a libweston-0.pc file. The -0 is the abi version
introduced in the previous patch.
Signed-off-by: Giulio Camuffo <giuliocamuffo@gmail.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The backends are now installed in lib/libweston-0, and the include
files that will be used by libweston in include/libweston-0. The other
modules and weston-specific include files are kept in the old paths.
A new wet_load_module() is added to load plugins in the old path,
which is not part of libweston, but weston only and defined in main.c.
To allow that to be used by out of tree weston plugins, the function
is declared in a new weston.h, installed in include/weston.
The -0 in the paths is the abi version of libweston, and it will also
be used by the libweston .so. If the abi changes the number will need
to be increased.
Signed-off-by: Giulio Camuffo <giuliocamuffo@gmail.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Instead add callbacks to the drm and fbdev backends and pass that to
the input backens so that when a new device needs to be configured
that is called and the compositor can configure it.
Signed-off-by: Giulio Camuffo <giuliocamuffo@gmail.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The config can now be retrieved with a new function defined in weston.h,
wet_get_config(weston_compositor*).
Signed-off-by: Giulio Camuffo <giuliocamuffo@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
They belong in the compositor rather than libweston since they
set signals handlers, and a library should not do that behind its
user's back. Besides, they were using functions in main.c already
so they were not usable by other compositors.
Signed-off-by: Giulio Camuffo <giuliocamuffo@gmail.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This patch splits screensooter.c so that the code implementing
the private screenshooter protocol and launching the client is
moved to a weston specific file, leaving only the code that can
be shared between compositors in screenshooter.c.
Two exported functions are added in screenshooter.c to start and
stop the recorder.
Signed-off-by: Giulio Camuffo <giuliocamuffo@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
weston_compositor_xkb_destroy() is called automatically so having only
weston_compositor_xkb_init() to be called by the user was a bit weird.
So rename it so that it makes more sense.
Also export it, since libweston compositors need to call it.
Signed-off-by: Giulio Camuffo <giuliocamuffo@gmail.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This patch completely removes the Raspberry Pi backend and the renderer.
The backend and the renderer were written to use the proprietary
DispmanX API available only on the Raspberry Pi, to demonstrate what the
tiny computer is capable of graphics wise. They were also used to
demonstrate how Wayland and Weston in particular could leverage hardware
compositing capabilities that are not OpenGL. The backend was first
added in e8de35c922, in 2012.
Since then, the major point has been proven. Over time, support for the
rpi-backend diminished, it started to deteriorate and hinder Weston
development. On May 11, I tried to ask if anyone actually cared about
the rpi-backend, but did not get any votes for keeping it:
https://lists.freedesktop.org/archives/wayland-devel/2016-May/028764.html
The rpi-backend is a good example of how using an API that is only
available for specific hardware, even more so as it is only available
with a proprietary driver stack, is not maintainable in the long run.
Most developers working on Weston either just cannot, or cannot bother
to test things also on the RPi. Breakage creeps in without anyone
noticing. If someone actually notices it, fixing it will require a very
specific environment to be able to test. Also the quality of the
proprietary implementation fluctuated. There are reports that RPi
firmware updates randomly broke Weston, and that nowadays it is very
hard to find a RPi firmware version that you could expect to work with
Weston if Weston itself was not broken. We are not even sure what is
broken nowadays.
This removal does not leave Raspberry Pi users cold (for long), though.
There is serious work going on in implementing a FOSS driver stack for
Raspberry Pi, including modern kernel DRM drivers and Mesa drivers. It
might not be fully there yet, but the plan is to be able to use the
standard DRM-backend of Weston on the RPis. See:
http://dri.freedesktop.org/wiki/VC4/
The rpi-backend had its moments. Now, it needs to go. Good riddance!
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Acked-by: Bryce Harrington <bryce@osg.samsung.com>
Acked-by: Jonas Ådahl <jadahl@gmail.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Exit the program if an unrecognized command line option is found.
Signed-off-by; Tom Hochstein <tom.hochstein@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Tested-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Add ivi-layout API for getting an ivi_layout_surface from a
weston_surface if it exists. This can be used by controllers that hook
up to core Weston callbacks and get handed a weston_surface, but need to
use ivi-layout API to manipulate it.
The only ways ivi-layout itself would be able to go from weston_surface
to ivi_layout_surface are either searching through the list of all
ivi_layout_surfaces or adding a dummy destroy listener to the
weston_surface. Therefore the implementation is delegated to
ivi-shell.c.
Ivi-shell.c can easily look up the ivi_shell_surface for a
weston_surface, and that will map 1:1 to an ivi_layout_surface.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Emre Ucan <eucan@de.adit-jv.com>
Establishes a single variable for defining the libwayland version
requirements, where we have versioned checks. Enforces the same version
dependency between libwayland-client and libwayland-server. Developers
typically only test the greater version of the two, so if they're
different it masks cases that don't get tested adequately. So this sets
wayland-client's required version to 1.10, same as for the server.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Tested-by: Quentin Glidic <sardemff7+git@sardemff7.net>
When we receive an wl_shell_surface::set_fullscreen request for a
surface that was already fullscreen, don’t do anything if the
parameters are the same as the initial request.
This prevents bogus or malicious clients from being able to always stay
on front by flooding the compositor with set_fullscreen requests after
the user has put them in the background with a mod+tab.
Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Fixes warnings and potential issues on 32-bit platforms, tested only on
ARM but I’d expect the same issue on i686.
Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Use SINCE macros instead of the hardcoded version value.
Signed-off-by: David Fort <contact@hardening-consulting.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Since a quite long time FreeRDP expect the ContextNew callback to return TRUE
when it succeeds. Without this we have some arbitrary failures (most probably
when eax is 0 at the end of the function).
Signed-off-by: David Fort <contact@hardening-consulting.com>
FreeRDP 2.0 is about to be released, this allows to compile against this version.
The detection is adjusted to prefer FreeRDP 2 against version 1.x.
Signed-off-by: David Fort <contact@hardening-consulting.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
When pixman is used and no connector could be found (or any other
error), drm_backend_create() tried to destroy a gbm_device that would
only be created in init_egl(), resulting in a segfault.
Signed-off-by: Emmanuel Gil Peyrot <emmanuel.peyrot@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The current behaviour leaves the name empty, making it somewhat harder
to determine the characteristics of this mode from a debugger.
Signed-off-by: Emmanuel Gil Peyrot <emmanuel.peyrot@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
[Pekka: wrap long line (ybakos)]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
weston_surface::output and weston_view::output as used for different
purposes. Only the surface output is used for frame callbacks.
The uses of the view output are much more vague and hard to describe.
Also fix a comment mistake in weston_surface_assign_output().
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
[Pekka: more verbose on the compositor.h comments]
a7af70436b converted the surface list into
a view list. There is no weston_compositor::surface_list anymore.
It looks like weston_surface::output's comment about surface list does
not apply to view list. Still, many places assume weston_surface::output
is not NULL when processing "visible" surfaces, e.g. those reachable via
the view list.
The comment on weston_view::output is updated. It seems there is no
longer any requirement for it to be NULL if the view is not in
view_list.
weston_view::link is documented to be in weston_compositor::view_list,
and weston_compositor::view_list is documented to contain weston_views.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
[Pekka: removed also the other "Must be NULL" comment.]
I was confused why timestamp was printed negative. This fixes it, and
others while at it.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Benoit Gschwind <gschwind@gnu-log.net>
Print pointer frames only if any pointer related events are printed
first.
This avoids flooding the output with "pointer frame" just because of
motion. You can test this with e.g.
$ ./weston-eventdemo --log-button
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Tested-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Benoit Gschwind <gschwind@gnu-log.net>
Tested-by: Benoit Gschwind <gschwind@gnu-log.net>
This adds an alternate weston terminal icon and icons for the flower and
editor clients. The original Inkscape SVG file is included.
Example screenshot:
http://www.bryceharrington.org/Files/weston-icons.png
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
This is derived from the implementation. I was not sure whether "under"
referred to object relationships or region intersections.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Emre Ucan <eucan@de.adit-jv.com>
Pekka Paalanen
