Otherwise shseat->focused_ivisurf can point to deleted memory.
This does not happen with the hmi-controller because it explicitly assigns a new
focused surface. But the ivi-shell should not relay on the controller here.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
The keyboard focus is active, but the desktop surface itself is not
displayed as active. Therefore, the surface should also be displayed as
active, as in kiosk-shell.
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
Add to handle seet hotplugging so that seats are properly picked up by
ivi-shell when they are dynamically created.
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
If the compositor is disabling a weston_output,
weston_head_from_resource can return NULL, so the return code must be
checked where used.
Fixes#638
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
The surface of the focus_view may be a subsurface. So get the corresponding main
surface first.
Without this get_ivi_shell_surface(), will cast committed_private (which is a
weston_subsurface object) to ivi_shell_surface. Weston crashes shortly
afterwards.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Input panels are used for complex text composition for CJK alphabets and for
onscreen keyboards. Support for this is already implemented in libweston and
the desktop shell.
This adds extends the IVI shell to add support for input panels as well. The
low-level parts are implemented in the IVI shell. The positioning of the input
panels is delegated to the controller.
Support for input panels and the relevant protocols is only enabled if the
controller attaches a listener to the new signals.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
shell_surface_send_configure() should only be called for ivi surfaces. Other (or
no) *configure() calls are needed for other types of surfaces.
Make sure that get_ivi_shell_surface() returns NULL if the surface is not an ivi
surface. And don't ignore wrong surfaces but assert instead to make it obvious
that new surface types need special handling in ivi_layout_surface_set_size().
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
I also snuck in a trivial change to drag_surface_configure at the same
time to avoid yet another micro patch.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
If a client commits a null buffer, weston will unmap all the views of
the surface and marks it is unmapping. In the case, the client commits
a new valid buffer, then the controller wants to rebuild the views
without applies the pending properties of surfaces and layers.
The ivi_layout_interface should prodive an interface for this.
Suggested-by: Michael Olbrich's avatarMichael Olbrich <m.olbrich@pengutronix.de>
Suggested-by: K J Rajendraprasad's avatarRajendraprasad K J <KarammelJayakumar.Rajendraprasad@in.bosch.com>
Signed-off-by: Tran Ba Khang(MS/EMC31-XC) <Khang.TranBa@vn.bosch.com>
Both functions are callbacks that are added when the ivi_shell_surface is
created and removed when it is destroyed, so get_ivi_shell_surface() will never
return NULL here.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
The weston_surface passed to surface_create() should never be NULL. And other
code already relies on that anyway, so just remove the check.
Now surface_create() will never fail, so more checks can be removed.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Various shells provide the functionality to take screenshots using the
weston-screenshooter or a key combination. This is useful on the ivi-shell, too.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
In the case the controlelrs are depended on ivi-shell resource,
it must be destroy before the ivi shell destroy. To do this,
add new ivi shell destroy signal on ivi shell, emit it on
the begining of the shell destroying
Suggested-by: Harsha M M <harsha.manjulamallikarjun@in.bosch.com>
Suggested-by: Michael Olbrich <m.olbrich@pengutronix.de>
Suggested-by: Marius Vlad <marius.vlad@collabora.com>
Signed-off-by: Tran Ba Khang(MS/EMC31-XC) <Khang.TranBa@vn.bosch.com>
To avoid the following UAF:
Invalid read of size 8
at 0x4AE5EFF: weston_desktop_get_display (libweston-desktop.c:110)
by 0x4AEB2C9: weston_desktop_xdg_surface_schedule_configure (xdg-shell.c:1160)
by 0x4AEA77A: weston_desktop_xdg_toplevel_set_size (xdg-shell.c:711)
by 0x4AE839D: weston_desktop_surface_set_size (surface.c:504)
by 0x63F7D43: ivi_layout_surface_set_size (ivi-layout.c:1599)
by 0x63F949F: transition_move_resize_view_destroy (ivi-layout-transition.c:311)
by 0x63F9397: layout_transition_destroy (ivi-layout-transition.c:259)
by 0x63F8E0B: ivi_layout_remove_all_surface_transitions (ivi-layout-transition.c:121)
by 0x63F4BC1: ivi_layout_surface_destroy (ivi-layout.c:258)
by 0x63F38AF: layout_surface_cleanup (ivi-shell.c:162)
by 0x63F3D2D: shell_destroy (ivi-shell.c:359)
by 0x4AF059A: weston_signal_emit_mutable (signal.c:62)
Address 0x174202d0 is 0 bytes inside a block of size 152 free'd
at 0x484617B: free (vg_replace_malloc.c:872)
by 0x4AE5EDC: weston_desktop_destroy (libweston-desktop.c:97)
by 0x63F3CF2: shell_destroy (ivi-shell.c:355)
by 0x4AF059A: weston_signal_emit_mutable (signal.c:62)
by 0x4ACBC2C: weston_compositor_destroy (compositor.c:8629)
by 0x4864A4B: wet_main (main.c:3908)
by 0x10915D: main (executable.c:33)
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
The ivi-shell keeps track of its surfaces by adding them to the ivi_surface_list
to be able to remove them on shutdown. It also creates an ivi_layout_surface for
a desktop surface, but does not keep track of these surfaces.
During compositor shutdown, libweston prints the following message:
BUG: finalizing a layer with views still on it.
Fix it by adding the created ivi_layout_surface to the ivi_surface_list to
remove the surfaces from the layer during shutdown.
Furthermore, remove the ivi_layout_surface from the desktop surface and free it
when the desktop surface is destroyed.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Activate keyboard focus for surfaces created with xdg-shell protocol. If
the surface has child surface, the child surface is activated instead of
the parent surface.
Fixes: #630
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
Without this, the earliest signal the ivi controller receives for a new surface
is configure_desktop_changed signal. And this is not emitted until the surface
has the first buffer attached.
By emitting the signal during surface creation, the controller is able to set
the initial width and height for the first configure.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Fixes ASan reported leaks:
Direct leak of 88 byte(s) in 1 object(s) allocated from:
#0 0x7fcdc7382518 in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0xe9518)
#1 0x7fcdc2d902f3 in zalloc ../../git/weston/include/libweston/zalloc.h:38
#2 0x7fcdc2d91cc2 in weston_desktop_xwayland_init ../../git/weston/libweston-desktop/xwayland.c:410
#3 0x7fcdc2d89aef in weston_desktop_create ../../git/weston/libweston-desktop/libweston-desktop.c:87
#4 0x7fcdc2db7300 in wet_shell_init ../../git/weston/ivi-shell/ivi-shell.c:642
#5 0x7fcdc7261de5 in wet_load_shell ../../git/weston/compositor/main.c:956
#6 0x7fcdc7272baa in wet_main ../../git/weston/compositor/main.c:3410
#7 0x55e12a669e29 in execute_compositor ../../git/weston/tests/weston-test-fixture-compositor.c:432
#8 0x55e12a66d85d in weston_test_harness_execute_as_client ../../git/weston/tests/weston-test-runner.c:528
#9 0x55e12a65dc48 in fixture_setup ../../git/weston/tests/ivi-layout-test-client.c:48
#10 0x55e12a65dcca in fixture_setup_run_ ../../git/weston/tests/ivi-layout-test-client.c:50
#11 0x55e12a66de12 in main ../../git/weston/tests/weston-test-runner.c:661
#12 0x7fcdc6ed709a in __libc_start_main ../csu/libc-start.c:308
#13 0x55e12a65d769 in _start (/home/pq/build/weston-meson/tests/test-ivi-layout-client+0xd769)
Indirect leak of 152 byte(s) in 1 object(s) allocated from:
#0 0x7fcdc7382518 in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0xe9518)
#1 0x7fcdc2d89811 in zalloc ../../git/weston/include/libweston/zalloc.h:38
#2 0x7fcdc2d8992d in weston_desktop_create ../../git/weston/libweston-desktop/libweston-desktop.c:65
#3 0x7fcdc2db7300 in wet_shell_init ../../git/weston/ivi-shell/ivi-shell.c:642
#4 0x7fcdc7261de5 in wet_load_shell ../../git/weston/compositor/main.c:956
#5 0x7fcdc7272baa in wet_main ../../git/weston/compositor/main.c:3410
#6 0x55e12a669e29 in execute_compositor ../../git/weston/tests/weston-test-fixture-compositor.c:432
#7 0x55e12a66d85d in weston_test_harness_execute_as_client ../../git/weston/tests/weston-test-runner.c:528
#8 0x55e12a65dc48 in fixture_setup ../../git/weston/tests/ivi-layout-test-client.c:48
#9 0x55e12a65dcca in fixture_setup_run_ ../../git/weston/tests/ivi-layout-test-client.c:50
#10 0x55e12a66de12 in main ../../git/weston/tests/weston-test-runner.c:661
#11 0x7fcdc6ed709a in __libc_start_main ../csu/libc-start.c:308
#12 0x55e12a65d769 in _start (/home/pq/build/weston-meson/tests/test-ivi-layout-client+0xd769)
Indirect leak of 72 byte(s) in 1 object(s) allocated from:
#0 0x7fcdc7382518 in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0xe9518)
#1 0x7fcdc2d8a5ae in zalloc ../../git/weston/include/libweston/zalloc.h:38
#2 0x7fcdc2d8a89e in weston_desktop_client_create ../../git/weston/libweston-desktop/client.c:108
#3 0x7fcdc2d91d2a in weston_desktop_xwayland_init ../../git/weston/libweston-desktop/xwayland.c:415
#4 0x7fcdc2d89aef in weston_desktop_create ../../git/weston/libweston-desktop/libweston-desktop.c:87
#5 0x7fcdc2db7300 in wet_shell_init ../../git/weston/ivi-shell/ivi-shell.c:642
#6 0x7fcdc7261de5 in wet_load_shell ../../git/weston/compositor/main.c:956
#7 0x7fcdc7272baa in wet_main ../../git/weston/compositor/main.c:3410
#8 0x55e12a669e29 in execute_compositor ../../git/weston/tests/weston-test-fixture-compositor.c:432
#9 0x55e12a66d85d in weston_test_harness_execute_as_client ../../git/weston/tests/weston-test-runner.c:528
#10 0x55e12a65dc48 in fixture_setup ../../git/weston/tests/ivi-layout-test-client.c:48
#11 0x55e12a65dcca in fixture_setup_run_ ../../git/weston/tests/ivi-layout-test-client.c:50
#12 0x55e12a66de12 in main ../../git/weston/tests/weston-test-runner.c:661
#13 0x7fcdc6ed709a in __libc_start_main ../csu/libc-start.c:308
#14 0x55e12a65d769 in _start (/home/pq/build/weston-meson/tests/test-ivi-layout-client+0xd769)
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This ensures the layers are torn down properly.
See commit: libweston: add weston_layer_fini()
There would be a lot more to tear down here, but that is for another
time.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Wayland innovated a lot of cool things, but non-binary boolean values is
the great advances of our time.
Make config_parser_get_bool() work on boolean values, and switch all its
users.
Signed-off-by: Daniel Stone <daniels@collabora.com>
This introduces a new convention of checking through the compositor destroy
listener if the plugin is already initialized. If the plugin is already
initialized, then the plugin entry function succeeds as a no-op. This makes it
safe to load the same plugin multiple times in a running compositor.
Currently module loading functions return failure if a plugin is already
loaded, but that will change in the future. Therefore we need this other method
of ensuring we do not double-initialize a plugin which would lead to list
corruptions the very least.
All plugins are converted to use the new helper, except:
- those that do not have a destroy listener already, and
- hmi-controller which does the same open-coded as the common code pattern
did not fit there.
Plugins should always have a compositor destroy listener registered since they
very least allocate a struct to hold their data. Hence omissions are
highlighted in code.
Backends do not need this because weston_compositor_load_backend() already
protects against double-init. GL-renderer does not export a standard module
init function so cannot be initialized the usual way and therefore is not
vulnerable to double-init.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This was forgetting to remove the compositor destroy listener if init failed,
which would lead to use-after-free on compositor tear-down. Found by
inspection.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Since the surface_destroy_listener is only registered for ivi-shell
applications, it should only be removed for ivi-shell applications.
Signed-off-by: Michael Teyfel <mteyfel@de.adit-jv.com>
Removed assert, that checks if ivi-surface is not available, since this
can now happen with xdg-shell support.
Signed-off-by: Michael Teyfel <mteyfel@de.adit-jv.com>
Use the proper function to exit instead of the libwayland one, to allow main
handle_exit() to be called.
This is just to unify the exit paths.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
input panel related members of ivi_shell struct are
not required anymore. Also get_default_view(),
input_panel_setup() and input_panel_destroy() are not used.
Therefore, we can remove them.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
input panel implementation puts contents of an
application, which uses input_method protocol,
on top of all other surfaces. It is not controllable
with ivi-layout interface.
This is not acceptable for an In-Vehicle Infotainment
platform. Because we have to ensure configured scenegraph
cannot be hijacked by any rogue application.
Therefore, I am removing input panel implementation
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
During de-init ensure removal of compositor destroy notification
from list. Otherwise a dongling pointer is left behind which will
affect other plugins.
Signed-off-by: Harsha M M <harsha.manjulamallikarjun@in.bosch.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
If compositor wakes up from sleep state, we have
to trigger repaint for all outputs.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
it has only developermode option parameter.
The parameter is only used in init_ivi_shell.
Therefore, we can basically remove the struct,
and check the option locally in the function.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
controller modules can be loaded as weston modules
from the main function of weston.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Change code related to touch down events to use struct timespec to
represent time.
This commit is part of a larger effort to transition the Weston codebase
to struct timespec.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Change code related to key events to use struct timespec to represent
time.
This commit is part of a larger effort to transition the Weston codebase
to struct timespec.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Change code related to button events to use struct timespec to represent
time.
This commit is part of a larger effort to transition the Weston codebase
to struct timespec.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This avoids loading a shell as a module, so we are sure to have only one
shell loaded at a time.
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Currently, layers’ order depends on the module loading order and it does
not survive runtime modifications (like shell locking/unlocking).
With this patch, modules can safely add their own layer at the expected
position in the stack, with runtime persistence.
v4 Reviewed-by: Giulio Camuffo <giuliocamuffo@gmail.com>
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Acked-by: Daniel Stone <daniels@collabora.com>
[Pekka: fix three whitespace issues]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The name suggests that it activates surfaces, but the code says it
rather just assigns keyboard focus. Rename it for clarity, and so the
original function name could be used for something more appropriate
later. Switch order of parameters since keyboard focus is a property of
the seat. Update all callers as appropriate.
Change was asked for by pq, May 26, 2016:
"This should be called weston_seat_set_keyboard_focus(seat, surface).
Keyboard focus is a property of the seat."
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This is the start of separating weston-the-compositor source files from
libweston source files.
This is moving all the files related to the 'weston' binary. Also the
CMS and systemd plugins are moved.
xwayland plugin is not moved, because it will be turned into a
libweston feature.
To avoid breaking the build, #includes for weston.h are fixed to use
compositor/weston.h. This serves as a reminder that such files may need
further attention: moving to the right directory, or maybe using the
proper -I flags instead.
v2: Move also screen-share.c, and add a note about weston-launch.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Tested-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Tested-by: Benoit Gschwind <gschwind@gnu-log.net>
Acked-by: Benoit Gschwind <gschwind@gnu-log.net>
[Pekka: rebased]
