The API expects uintptr_t (good!), but we're passing an unsigned long
here. Make the conversion explicit.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Some graphics drivers (currently at least VMware and AMD) will give a 0
timestamp for the atomic mode flip completion event when turning off
the display. This causes us to trip an assertion in
weston_output_frame_finish() because the clock jumps backwards, which
isn't a condition the presentation feedback code should be dealing with.
This is a good assertion and we'd like to keep it. And there's some
expectation that this is buggy behaviour in the graphics drivers that will
be fixed at some point.
Pragmatically speaking though, there's nothing productive we can do with a
correct timestamp for the display shutdown. So let's just flag the
event sent for DPMS off as invalid so presentation feedback doesn't have
to worry about it, and the assert doesn't fire.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Fixes a minor leak due to launcher-libseatd:
Direct leak of 32 byte(s) in 1 object(s) allocated from:
#0 0x7f15664e5037 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.6+0xaa037)
#1 0x7f156305c59f in zalloc ../include/libweston/zalloc.h:38
#2 0x7f156305c99b in seat_open_device ../libweston/launcher-libseat.c:114
#3 0x7f1563056341 in weston_launcher_open ../libweston/launcher-util.c:79
#4 0x7f156302f1e2 in drm_device_is_kms ../libweston/backend-drm/drm.c:2616
#5 0x7f156302f751 in find_primary_gpu ../libweston/backend-drm/drm.c:2715
#6 0x7f15630309a5 in drm_backend_create ../libweston/backend-drm/drm.c:2970
#7 0x7f15630317ab in weston_backend_init ../libweston/backend-drm/drm.c:3162
#8 0x7f1566025b61 in weston_compositor_load_backend ../libweston/compositor.c:8201
#9 0x7f156640cb9e in load_drm_backend ../compositor/main.c:2596
#10 0x7f156641193c in load_backend ../compositor/main.c:3079
#11 0x7f1566413cc3 in wet_main ../compositor/main.c:3356
#12 0x562ba484b179 in main ../compositor/executable.c:33
#13 0x7f156624fcc9 in __libc_start_main ../csu/libc-start.c:308
But also use the launcher interface to actually close the DRM fd, in
mirror to what weston_launcher_open() does.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
The DRM backend uses changes in the cursor view memory address and
surface damage to detect when it needs to re-upload to a cursor plane
framebuffer.
However, when a cursor view is destroyed and then recreated, e.g., when
the pointer cursor surface is updated, the newly created view may have
the same memory address as the just destroyed one. If no new cursor
buffer is provided (because it was attached, committed and used
previously) when this address reuse occurs, then there also isn't any
updated surface damage and the backend doesn't update the cursor plane
framebuffer at all.
To fix this issue utilize the destroy signal to track when the cursor
view is destroyed, and clear the cached cursor_view value in drm_output.
After clearing the cached value, the next cursor view is always
considered new and thus uploaded to the plane properly.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
See: https://gitlab.freedesktop.org/wayland/weston/-/issues/467#note_814985
This starts building the framework required for implementing color
management.
The main new interface is struct weston_color_manager. This commit also
adds a no-op color manager implementation, which is used if no other
color manager is loaded. This no-op color manager simply provides
identity color transforms for everything, so that Weston keeps running
exactly like before.
weston_color_manager interface is incomplete and will be extended later.
Colorspace objects are not introduced in this commit. However, when
client content colorspace and output colorspace definitions are
combined, they will produce color transformations from client content to
output blending space and from output blending space to output space.
This commit introduces a placeholder struct for color transforms,
weston_color_transform. Objects of this type are expected to be heavy to
create and store, which is why they are designed to be shared as much as
possible, ideally making their instances unique. As color transform
description is intended to be generic in libweston core, renderers and
backends are expected to derive their own state for each transform
object as necessary. Creating and storing the derived state maybe be
expensive as well, more the reason to re-use these objects as much as
possible. E.g. GL-renderer might upload a 3D LUT into a texture and keep
the texture around. DRM-backend might create a KMS blob for a LUT and
keep that around.
As a color transform depends on both the surface and the output, a
transform object may need to be created for each unique pair of them.
Therefore color transforms are referenced from weston_paint_node. As
paint nodes exist for not just surface+output but surface+view+output
triplets, the code ensures that all paint nodes (having different view)
for the same surface+output have the same color transform state.
As a special case, if weston_color_transform is NULL, it means identity
transform. This short-circuits some checks and memory allocations, but
it does mean we use a separate member on weston_paint_node to know if
the color transform has been initialized or not.
Color transformations are pre-created at the weston_output
paint_node_z_order_list creation step. Currently the z order lists
contain all views globally, which means we populate color transforms we
may never need, e.g. a view is never shown on a particular output.
This problem should get fixed naturally when z order lists are
constructed "pruned" in the future: to contain only those paint nodes
that actually contribute to the output's image.
As nothing actually supports color transforms yet, both renderers and
the DRM-backend assert that they only get identity transforms. This
check has the side-effect that all surface-output pairs actually get a
weston_surface_color_transform_ref even though it points to NULL
weston_color_transform.
This design is inspired by Sebastian Wick's Weston color management
work.
Co-authored-by: Sebastian Wick <sebastian@sebastianwick.net>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Remove all the backend code to support drivers without universal planes.
From[1]:
"The code needed to support kernels where DRM does not support uiniversal
planes makes the DRM-backend a little more complicated, because it needs
to create fake planes for primary and cursor. The lifetimes of the fake
planes does not match the lifetime of "proper" planes, which is surprising."
And since the universal planes left the experimetal flag in 2014[2] it is
safe to remove the support now.
[1] https://gitlab.freedesktop.org/wayland/weston/-/issues/427
[2] https://cgit.freedesktop.org/drm/drm-tip/commit/?id=c7dbc6c9ae5c3baa3be755a228a349374d043b5b
Signed-off-by: Igor Matheus Andrade Torrente <igormtorrente@gmail.com>
Iterate paint nodes instead of the global view list. Right now this does
not change behavior.
This is a step towards using per-output view lists that can then be
optimized for the output in libweston core.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
If sprites_are_broken, then we will only ever arrive in renderer_only
mode, so this case will be caught by the checks above.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Weston internals and Wayland clients assume that output presentation
clock cannot go backwards. Therefore require unconditionally that KMS
uses the monotonic clock.
The kernel unconditionally supports DRM_CAP_TIMESTAMP_MONOTONIC. See:
commit 25e1a79874eb3821d93310c908cc0a81b47af060
Author: Arnd Bergmann <arnd@arndb.de>
Date: Wed Oct 11 17:20:13 2017 +0200
drm: vblank: remove drm_timestamp_monotonic parameter
That one removed the final possibility of DRM_CAP_TIMESTAMP_MONOTONIC
being false, by removing the module option. But even before that, all
drivers have been supporting monotonic, since
commit c61eef726a78ae77b6ce223d01ea2130f465fe5c
Author: Imre Deak <imre.deak@intel.com>
Date: Tue Oct 23 18:53:26 2012 +0000
drm: add support for monotonic vblank timestamps
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
fb->format is *pixel_format_info, whereas fb->format->format is the
actual DRM/wl_shm format code we want to see here. Fix the drm_debug()
call accordingly.
Signed-off-by: Bastian Krause <bst@pengutronix.de>
In drm_fb_get_from_dmabuf() we have some compile time array copies, and
multiple static_assert() calls are needed (for safety). This makes the
code unpleasant to read.
Add ARRAY_COPY macro, to simplify the code.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
In commit "backend-drm: do not import dmabuf buffers with no modifiers
to KMS" we've stopped to import dmabuf with no modifiers to KMS.
In this patch we document why we can still import wl_drm buffers with no
modifiers to KMS.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
We can't tell the layout of a buffer that has been allocated with no
modifiers. Although usually drivers use linear layouts to allocate in
these cases, it is not a rule. It can use a tiling layout, for instance,
under the hood.
So it is not safe to import a buffer with no modifiers to KMS, as it
can't tell the buffer layout and this may result in garbage being
displayed. In this patch we start to require explicit modifiers to
import buffers to KMS.
In most cases things just work as expected, but just because both sides
(display and render driver) usually end up using the linear layout when
modifiers are not exposed. It also works on systems where the display
and render devices are tied (desktops with Intel or AMD, for instance),
as there's only one driver and it knows the layout of the buffer (no
need to guess).
But in SoC's where the display and render device are split, things can
go wrong. It is better to lose performance and not break things. To
solve the problem, drivers should be updated to expose modifiers (even
if only DRM_FORMAT_MOD_LINEAR), as the concept of implicit modifiers is
the root of the problem.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
In commit "backend-drm: add DRM_FORMAT_MOD_INVALID to modifier sets when
no modifiers are supported" we've changed the code that iterates through
the IN_FORMATS blob property. Now it adds DRM_FORMAT_MOD_INVALID for
formats exposed without modifiers.
But the thing is that there shouldn't be formats in the IN_FORMATS blob
exposed without modifiers, as the blob has been added after the
introduction of the explicit modifiers API in the kernel. For now,
there's nothing in the kernel to ensure this correct behavior. So
instead of adding DRM_FORMAT_MOD_INVALID in this case, ignore these
formats, as userspace can't do much in this case.
In the future this may be fixed by the kernel. Or maybe the following MR
in libdrm, which adds an iterator API for the IN_FORMATS blob:
https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/146
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
From now on, when we can't know the modifiers supported for a certain
format, we add DRM_FORMAT_MOD_INVALID to its modifier set.
There is some parts where nothing is being added an others where
DRM_FORMAT_MOD_LINEAR is being added, so fix them.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
In create_gbm_surface() we may allocate with no modifiers in the
following situations:
1. old GBM version, so HAVE_GBM_MODIFIERS is false;
2. the KMS driver does not support modifiers;
3. if allocating with modifiers failed, what can happen when the KMS
display device supports modifiers but the GBM driver does not, e.g.
the old i915 Mesa driver.
The comment was only stating the third situation, so add the other two.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
The function drm_output_init_egl() is too big, so move the code to
create the gbm surface to a separate function: create_gbm_surface().
Also made some minor style changes to the code that has been moved, in
order to improve readability.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
In commit "libweston: add struct weston_drm_format" struct
weston_drm_format and its helper functions were added to libweston.
Also, unit tests for this API have been added in commit "tests: add unit
tests for struct weston_drm_format".
Start to use this API in the DRM-backend, as it enhances the code by
avoiding repetition and ensuring correctness.
Signed-off-by: Scott Anderson <scott.anderson@collabora.com>
Co-authored-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
In drm_output_prepare_plane_view() we iterate the list of planes and add
them as candidates to promote the view to one of them.
Cursor planes do not support buffers other than wl_shm (at least for
now). So when we have a dmabuf or an EGL buffer in the view, the
function drm_output_plane_cursor_has_valid_format() returns false and
the cursor plane is not added to the candidate list.
In this patch we move the responsibility of doing this from
drm_output_plane_cursor_has_valid_format() to
drm_output_prepare_plane_view() itself, as the incompatibility between
other types of buffers and cursor planes is different from the
incompatibility between formats. This makes the code easier to read
and also documents the current incompatibility between cursor planes
and buffers that are not created through wl_shm.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
In the absence of universal planes support,
drm_output_find_special_plane() sets the plane format to zero as a
placeholder. Then in drm_output_init_planes() it sets the format to
output->gbm_format.
As output->gbm_format is already set by the time we call
drm_output_find_special_plane(), simply set the plane format to it
directly in this function. This makes the code clearer, as there is no
reason to use the placeholder.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
In some situations, like positioning a sub-surface that exceeds the
output's dimensions we would adjust the plane state dimensions to some
lower values to that of the buffer. That would ultimately trip the cursor
update function because the buffer itself actually exceeds the maximum
size/dimension of the cursor.
The plane state destination co-ordinates is the area of the view which
is visible on the output, which in some situations, would actually be
smaller than the original buffer dimensions (making it so that it will
pass the cropping/scaling check), but depending on of
how large is the surface buffer, it would tripping the assert wrt to
cursor width/height dimensions.
This hasn't been seen so far due to the fact that until recently we had
a cursor surface that always reached the cursor plane and that was
already being set-up by default (with desktop-shell, which is no longer
the case), and also because kiosk-shell, which doesn't set-up a cursor
surface, was not available.
This adds a check to skip placing the view in the cursor plane if the
buffer dimensions exceed the cursor permitted width/height.
(Suggested-by Daniel Stone).
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Tearing down the drm-backend when there are no input devices, would call
for the gbm device destruction before compositor shutdown. The latter
would call into the renderer detroy function and assume that the
EGLDisplay, which was created using the before-mentioned gbm device, is
still available. This patch re-orders the gbm destruction after the
compositor shutdown when no one would make use of it.
Fixes: #314
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Suggested-by: Daniel Stone <daniel.stone@collabora.com>
This header is for sharing fallback definitions for drm_fourcc.h. A new
test in tests/yuv-buffer-test.c is going to be needing XYUV8888 format,
and more new formats will be expected with HDR supports.
Share these fallback definitions in one place instead of copying them
all over.
All users of drm_fourcc.h are converted to include weston-drm-fourcc.h
instead for consistency: have the same definitions available everywhere.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
MOD_INVALID came with libdrm 2.4.83 and MOD_LINEAR came with libdrm
2.4.82. libweston unconditionally depends on libdrm >= 2.4.95, so the
fallback is not necessary.
Since linux-dmabuf.h itself has no use for these and also forgets to
include drm_fourcc.h, .c files including drm_fourcc.h after this header
would trigger compiler warnings.
linux-dmabuf.c does need these, so add the proper include.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
The renderer must be called for any pending screen capture to complete.
Previously this was guaranteed by weston_screenshooter_shoot() forcing
full output damage, so damage was never empty. If the future,
screenshooting stops inflicting damage, and the damage on the primary
plane even after disabling hardware planes may be empty.
This patch ensures that screenshots do not get stuck until damage
occurs.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Without this patch, the DRM-backend would rewrite the 'require-input',
core section option given by the user.
This removes 'continue_without_input' DRM-backend option and takes into
consideration the cmd line option only if that was passed (Pekka Paalanen).
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
gbm-drm.c includes gl-renderer.h. When EGL is enabled, that in turns
includes egl.h. As such, dependencies for drm should include EGL if
it is available.
This condition is modelled after a similar one in libweston/meson.build
Reported-by: Gary Bisson <gary.bisson@boundarydevices.com>
Reported-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Refik Tuzakli <tuzakli.refik@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Rework some functions in `drm.c` to reuse the `drmModeRes` and
reduce the usage of `drmModeGetResources` and `drmModeGetResources`.
Signed-off-by: Igor Matheus Andrade Torrente <igormtorrente@gmail.com>
96bef0517e "drm-backend: add support for
writeback connectors" started using DRM_MODE_CONNECTOR_WRITEBACK and
DRM_CLIENT_CAP_WRITEBACK_CONNECTORS. These were introduced in libdrm
2.4.95.
According to
https://gitlab.freedesktop.org/wayland/weston/-/merge_requests/311
Ubunut Xenial is the only mentioned distribution that does not provide a
libdrm new enough. I think that is fine to drop now, 2016 was a good
while ago.
Libdrm 2.4.95 also introduced DRM_CLIENT_CAP_ASPECT_RATIO,
DRM_MODE_PICTURE_ASPECT_64_27, DRM_MODE_PICTURE_ASPECT_256_135.
The fallback definitions for the above are dropped.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Recognize writeback connectors and add 'struct drm_writeback'
objects in order to store them.
These objects are created and stored in a list by the time
that DRM-backend is initialized. This list is updated if a
writeback connector dynamically appears or is disconnected.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Instead of directly creating heads for the connectors in functions
drm_backend_create_heads() and drm_backend_update_connectors(),
add drm_backend_add_connector() that will handle this.
This split makes the code look better and will also make our lives
easier when we introduce writeback connectors.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Add helper function resources_has_connector(), what makes
the function drm_backend_update_connectors() look better.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
To deal with appearing/disappearing connectors we have the
function drm_backend_update_heads(). Rename it to
drm_backend_update_connectors(), as it is more in line with
what it does.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
In case of success, drm_head_create() and drm_head_update_info()
take ownership of a connector. As this is an important
information, update the description of these functions
to include this.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
The function drm_connector_assign_connector_info() should
not be calling functions to handle drm_head, as connectors
and heads are not the same thing after patch "drm-backend:
move connector data from struct drm_head to struct drm_connector".
Move drm_head specific calls to drm_head_update_info(). This
is more in line with the hierarchy of the objects and also
allow us to drop drm_head pointer from drm_connector.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Instead of calling drmModeGetConnector() in drm_head_create()
and drm_head_update_info(), it is better to call it in
drm_backend_create_heads() and drm_backend_update_heads().
Then we can pass the drmModeConnector object as parameter.
This does not change the behavior of the code, but help us
to avoid unnecessarily calling drmModeGetConnector().
Besides that, in the future we will have support for writeback
connectors. And so drm_backend_create_heads() will be reworked
to also populate a list of writeback connectors. To make this
work, we are going to need to know if a connector is of the
writeback type or not, to know if we should call drm_head_create()
or drm_writeback_create(). We can only tell the type of connector
if we have the drmModeConnector object.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Instead of calling drmModeObjectGetProperties() each time that we need
the connector properties, it is better to keep a reference for it in
struct drm_connector. This reference is only updated when is necessary.
E.g. hotplug events.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
This is the first step in order to add support for writeback
connector in Weston. We don't want writeback connectors data
to be stored in 'struct drm_head' objects, as these objects are
used to output content and we should not use writeback connectors
for this purpose.
The writeback connectors will be stored in a new 'struct
drm_writeback', but the connector data is common between
'struct drm_head' and 'struct drm_writeback'.
So move connector data from 'struct drm_head' to 'struct
drm_connector'. This helps to avoid code duplication and makes
the code clearer.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
In commit c1e89ba2 "compositor-drm: move connector fields into
drm_head" the function drm_head_assign_connector_info() was
introduced. By that time it was being used only at drm_head
creation, and not to handle connector changes.
In d2e6242e "compositor-drm: create heads for all connectors"
it started to be used also to handle connector changes. In
this scenario we replace old connector props with newer data.
Before doing this, free the old connector data to avoid memory
leak.
Note that as drm_property_info_free() is safe to be called on
a zero-initialized struct, we can call it even in the case where
the head is being created and there are no props yet.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Commit "drm-backend: move code to init/deinit planes to specific
functions" lost a chunk of drm_output_deinit() when moving code into
drm_output_deinit_planes(). Reinstate the missing chunk.
This fixes an endless loop over weston_compositor::plane_list when you
start with three monitors connected, unplug and re-plug one.
Fixes: 3be23eff99
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
After commit "drm-backend: move code to init/deinit planes to specific
functions" we have a specific function to init planes. As this function
does not set output->crtc, it should not set it to NULL in case of
failure. This is caller's responsibility.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
There are some places where we can make some cosmetic changes
to make code simpler and easier to read. Make these cosmetic
changes. Note that they do not change the code behavior.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
The code to init/deinit scanout and cursor planes was in
drm_output_init() and drm_output_deinit(). Move this code
to specific functions drm_output_init_planes() and
drm_output_deinit_planes(), as it makes the code clearer
and easier to maintain.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Now that we have a CRTC list in the DRM-backend, we can
iterate through it and look for the CRTCs that do not have
assigned outputs in order to find unused CRTCS.
So we can drop unused_crtcs from struct drm_backend and also
drop the functions drm_backend_update_unused_outputs() and
wl_array_remove_uint32().
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
There are no 'struct drm_output' for CRTCs that are not active.
Also, CRTC data lives in 'struct drm_output'. This is causing
us some trouble, as the DRM-backend needs to program those
unnactive CRTCs to be off.
If the DRM-backend had the reference for every CRTC (being
active or not), it would make certain functions (e.g.
drm_pending_state_apply_atomic()) more simple and efficient.
Move CRTC data from 'struct drm_output' to 'struct drm_crtc',
as this is the first step to allow the DRM-backend to have
references for every CRTC.
Also, add list of CRTCs to DRM-backend object. Now the
DRM-backend is responsible for allocating/deallocating the CRTC
objects. The outputs will only reference, init and fini the CRTCs
in this list.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Try to make drm_output_state_propose a little more clear by reducing
divergence between plane and renderer modes towards the end, removing
a possibly-surprising conditional continue.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reduce the scope of surface_overlap to where it's actually used, which
is only in the per-view loop, where it gets initialised and destroyed
every time.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Previously we assumed that cursor planes occluded nothing and would
always be blended, but overlay and scanout planes would always occlude
what's behind them. This is not actually true, as we can support alpha
blending on any kind of plane type now.
Remove the special case, which might hopefully fix some weird display
issues along the way. (Noticed by inspection.)
Signed-off-by: Daniel Stone <daniels@collabora.com>
We used to use planes_region for the output regions which were being
displayed on hardware planes; before we grew zpos awareness, we couldn't
have any planes overlapping with each other, since the ordering would be
undefined.
Since the zpos awareness though, this region is unused, so we can just
remove it.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Initially finish_frame() was never called in drm_output_update_complete() for
'dpms_off_pending = true'. This is wrong for repaint_status ==
REPAINT_AWAITING_COMPLETION and that was fixed in
68d49d772c ("compositor-drm: run finish_frame when
dpms is turned off in update_complete").
However finish_frame() may now be called for repaint_status !=
REPAINT_AWAITING_COMPLETION, which is not allowed and results in a failed
assertion.
Fix this by checking dpms and repaint_status unconditionally.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
It seem that we skipped to put back in TEXT mode the tty, in case a DRM
device node wasn't present at that time, or it isn't present at all. This
orders the destroy part correctly as to handle that case as well.
As a side effect, as the tty will still be set to GRAPHICS mode we will
require a manual change of the tty number, which might be not possible
on all systems. Properly putting back the tty to TEXT mode should avoid
that, and allows to re-use the same tty no in case the DRM device has
been created at a later point in time.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Allow to disable GBM modifiers at runtime using the environment variable
WESTON_DISABLE_GBM_MODIFIERS.
This can be useful for debugging or when modifiers cause issues, e.g. in
case modifiers use higher memory bandwidth and hence impose a lower
resolution limit as it is the case with Intel Kaby Lake graphics.
Related to: https://gitlab.freedesktop.org/wayland/weston/-/issues/404
Signed-off-by: Stefan Agner <stefan@agner.ch>
The pipewire plugin uses this API as well, not just the remoting plugin. So
enable it if either is enabled.
And disable pipewire in the no-gl-renderer CI build. The virtual outputs don't
work without it.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
If a surface is not visible, then is does not matter if the view is on multiple
outputs. It will be skipped anyways when the output is rendered.
So check first if the surface is acually visible on the output before doing any
checks that might force rendering. This avoids unnecessary rendering.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
When dissociating a universal plane from a crtc, we currently don't
reset the current state of the plane (plane->state_cur). When attempting
to use this plane in the future, we can run into invalid memory accesses
due to left over associations with potentially freed drm backend
objects. This commit resets the state of the scanout and cursor
universal planes associated with a crtc.
The following scenario exhibits the problem:
1. Start a (fullscreen) client that is suitable for and assigned to
the scanout plane. The plane's state_cur->output value is set.
2. Unplug the monitor: the scanout plane is "released" but still
maintains the state_cur->output association.
3. Replug the monitor: the plane is deemed unavailable due to an
existing, albeit invalid, state_cur->output value. Note the memory
errors trying to access the drm_output which was freed at step (2).
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
There's a log that advertises support for universal planes. That
can make users think there's something wrong with Weston or their
systems when universal planes are not supported, but that's not
the case. Remove this log from the code.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
This moves the creation of the blob to be earlier, to when the damage is
calculated. It replaces the damage tracked inside of the plane state
with the blob id itself.
This should stop creating new blob ids for TEST_ONLY commits, and them
being leaked in general, as the blob ids are now freed with the plane
state.
The FB_DAMAGE_CLIPS property is now always set if it's supported, and
will be 0 in the case that we have no damage information, which
signifies full damage to the kernel.
Signed-off-by: Scott Anderson <scott.anderson@collabora.com>
In the test suite we may want to run a DRM-backend test on a
non-default seat, which may not have a input device associated.
Weston's default behavior is to not open if input devices are
not found, as it may cause troubles. For instance, Weston can
open but if no input device is set than the user can not
interact or leave it.
Add flag --continue-without-input to DRM-backend so we can run
these types of tests with no input. Notice that this won't force
the compositor to skip opening a input device if it finds it on
the non-default seat.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Without universal plane, the weston crashes with null pointer access in
set_gbm_format function because that function called before output
enable function. By changing timing to set color format for primary
plane in this case, this issue fixes.
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
pixman_renderer_output_create currently takes a flags enum bitmask for
its options. Switch this to using a structure, so we can introduce other
non-boolean options.
Signed-off-by: Daniel Stone <daniels@collabora.com>
gl_rendererer's output_window_create has a lot of arguments now. Add a
structure for the options to make it more clear what is what.
This is in preparation for adding bare-integer arguments which are ripe
for confusion when passing positional arguments.
Signed-off-by: Daniel Stone <daniels@collabora.com>
gl_rendererer's output_create has a lot of arguments now. Add a
structure for the options to make it more clear what is what.
This is in preparation for adding bare-integer arguments which are ripe
for confusion when passing positional arguments.
Signed-off-by: Daniel Stone <daniels@collabora.com>
The renderer buffer size is usually the same size as the current mode,
so we were taking the dimensions from the currently-set mode. However,
using current_mode is quite confusing in places when it comes to scale,
and it also hampers our ability to do mode switches, as well as to
introduce a future option which will let the renderer use a smaller
buffer than the output and display scaled.
Simply take the dimensions of the renderer's output buffer from the
buffer itself.
Signed-off-by: Daniel Stone <daniels@collabora.com>
This condition inside drm_output_render() checks if we can reuse the
existing renderer buffer for the primary plane; this occurs in
mixed-mode composition where a client buffer promoted to a plane has
changed, but the primary plane is unchanged.
We accomplish this by checking if there is no damage on the
primary/renderer plane, and then if there is already a renderer buffer
active on the primary plane: in that case, we can reuse the buffer we
already have.
There was a further condition checking if the width and height were
identical. This was designed to prevent against issues on mode changes.
However, runtime mode changes are already quite broken, and a mode
change will also cause damage on the full plane. We can simply remove
this condition.
Signed-off-by: Daniel Stone <daniels@collabora.com>
The KMS 'panel orientation' property allows the driver to statically
declare a fixed rotation of an output device. Now that weston_head has a
transform member, plumb the KMS property through to weston_head so the
compositor can make a smarter choice out of the box.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
[daniels: Extracted from one of Lucas's patches]
Signed-off-by: Daniel Stone <daniels@collabora.com>
Commit "weston-log: add function to avoid direct
access to compositor members in non-core code" added the
function weston_compositor_add_log_scope mainly to allow
libweston users to avoid direct accessing core structs, as
weston_compositor.
Replace weston_log_context_add_log_scope usage by
weston_compositor_add_log_scope.
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
Just a couple of places which shouldn't be possible, so initialized and
added assertions to make sure.
Signed-off-by: Scott Anderson <scott.anderson@collabora.com>
There's a function named weston_compositor_log_scope_destroy()
but it doesn't take a struct weston_compositor argument.
Rename it to weston_log_scope_destroy(), as the argument is a
struct weston_log_scope.
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
There's a function named weston_compositor_add_log_scope()
but it doesn't take a struct weston_compositor argument.
Rename it to weston_log_ctx_add_log_scope(), as
the log_scope is being added to a log_context.
Also, bump libweston_major to 9.
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
The aspect ratio definitions for 64:27 and 256:135 have been added with
libdrm 2.4.95. However, Weston currently depends on libdrm 2.4.89 or
higher. Define the definitions in Weston to support libdrm older than
2.4.95.
Fixes: #332
Fixes: 6093772f45 ("backend-drm: Use aspect-ratio bit definitions from libdrm")
Signed-off-by: Stefan Agner <stefan@agner.ch>
When the aspect-ratio-aware mode support was added to Weston, it was
done before the libdrm support was finalised and merged. Between it
being added to Weston and being merged, it changed to no longer provide
the offset for the bitmask.
Instead of using the mask and a compatible enum, if we update our
libdrm dependency, we can use the flag definitions directly from libdrm.
In 94e4068ba1, the libdrm dependency was bumped to 2.4.83, which
enabled us to remove a bunch of error-prone ifdefs by making atomic and
modifier support mandatory.
We determined in the discussion of !311 that it was safe to push the
dependency as high as 2.4.91, as that was what was available in major
distributions.
Bumping to 2.4.86 allows us to safely remove the ifdef and go with
upstream flags, as that was added in mesa/drm@0d889201d1.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Remove unnecessary ifdefs for DRM_MODE_CONNECTOR_DSI, DRM_MODE_CONNECTOR_DPI.
They are both provided by libdrm and were introduced long before 2.4.83 (the
lowest version we currently support).
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
Since commit 28d26483 ("build: bump libdrm requirement to newer version
(2.4.83)"), all supported libdrm versions provide modifier formats,
atomic API and blob formats. Remove ifdef checks (HAVE_DRM_ADDFB2_MODIFIERS,
HAVE_DRM_ATOMIC, HAVE_DRM_FORMATS_BLOB) to improve the code and make it
simpler.
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
Mode change from mixed-mode to renderer-only means we should no longer
try to place views in HW planes (as we composite everything into the
primary plane) thus we should avoid that whenever that happens.
In the same time we need to be able to place in mixed-mode/renderer-only
mode the cursor view into the cursor plane (if one is available).
This patch adds a further check to skip plane assignment when disabling
overlay support (when we switch to renderer-only mode), when drivers do
not have atomic-modeset or it has been disabled intentionally.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Adds a further assert() to make sure we're not checking against invalid
values. This was seen in the wild when the kernel rejects the commit for
overlay resulting in a check for invalid zpos values.
Fixes: #304
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
when switching to mixed-mode of compositing
This way we avoid an (incorrect) duplicate check of zpos values. Also,
this would be needed because the renderer needs have the lowest zpos value
available as we don't (yet) properly support underlays, the primary
plane serves as our renderer.
Adds also a check to see if we try to assign a view to a plane with
a lower zpos value than the one assigned to the primary when switching
to mixed-mode of compositing.
Fixes: #304
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
It makes much more sense to be there. It adds some additional drm_debug()
statements to provide reason for failing to place the view in the HW
plane. Makes the reason for failing more accurate.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Suggested-by: Daniel Stone <daniel.stone@collabora.com>
Avoids the need to retrieve the DRM framebuffer in each function and
re-uses the one got before constructing the zpos candidate list.
Takes another reference for the scanout as to live the state, like
there's one for the overlay bit.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
As we already have a potential plane available to use, pass it
over the _prepare_overlay_view instead of trying to find one
from the backend plane list.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Suggested-by: Daniel Stone <daniel.stone@collabora.com>
In this manner we will allow views to reach the overlay (or underlays)
even if the damage tracking will detect that the new view will
occlude the view underneath it.
Renames occluded_region to planes_region, and uses occluded_region
to represent the region where we add each view's visible-and-opaque region.
Sprinkle some comments about each region.
Re-uses the view's clipped region to determine visible-and-opaque region
which is accumulated (for both renderer and HW planes cases) into
occluded_region. The current view's clipped_region is then checked against
occluded_region.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Suggested-by: Daniel Stone <daniel.stone@collabora.com>
We can determine if the pixel format used by the clients buffer is
scan-out capable much sooner, so do it when constructing the zpos
candidate list. It also removes the checks in their respective
prepare_ functions.
Avoids the situation where we'd need to retrieve the DRM framebuffer each time
when checking the pixel format.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
function
The idea is to place pixel the format checks in a common part and until
then, to make it available as a function so we can re-use easily.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
In order to better optimize view assignment to HW planes, we construct
an intermediary zpos candidate list which is used aggregate all suitable
planes for handling scan-out capable client buffers.
We go over it twice: once to construct it and once to pick-and-choose a
suitable plane based its highest zpos position.
In order to maintain the view order correctly we track current zpos
value being applied to the plane state and use it when trying to place
a view into a plane.
Pass the computed zpos value to be applied to the plane state.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Suggested-by: Daniel Stone <daniel.stone@collabora.com>
This is based on the assumption that overlays are in between cursor and
primary plane and it is required to be able to assign views to planes,
even if the driver doesn't not expose such property.
As we hard-code them as immutable the commit part would not need any
further modifications.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Suggested-by: Daniel Stone <daniel.stone@collabora.com>
Functional no change, as nobody makes use of it. Only apply the zpos
value if the zpos property is mutable (that is, zpos_max and zpos_min
are not the same).
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Due to an error in driving GitLab, this commit erroneously contained the
entirety of !267 (zpos support in the KMS backend) squashed into one
single commit, pushed into master.
In order to keep the history clean, this is being reverted; a rebased
version of !267 with the clear individual commits which were already
present will be applied in its place.
This reverts commit 95e3b0deae.
Make GBM optional in case GL renderer is disabled. This allows to
build Weston with DRM backend without Mesa dependencies.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Move DRM virtual support into a separate file. Use the remoting
compile time option to disable DRM virtual support since this is the
only user of DRM virtual support currently. This will make it easier
to build the DRM backend without GBM support.
Signed-off-by: Stefan Agner <stefan@agner.ch>
In the future libweston will stop providing it for its users, since it's not
part of libweston API.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
We have two kinds of libweston users: internal and external. Weston, the
frontend, counts as an external user, and should not have access to libweston
private headers. The shell plugins are external users as well, because we
intend people to be able to write them. Renderers, backends, and some plugins
are internal users who will need access to private headers.
Create two different Meson dependency objects, one for each kind.
This makes it less likely to accidentally use a private header.
Screen-share is a Weston plugin and therefore counts as an external user, but
it needs the backend API to deliver input. Until we are comfortable exposing
public API for that purpose, let it use internal headers.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
As 'new_subscription' can create additional objects, 'destroy_subscription'
will be needed when cleaning up.
As this requires a libweston_major bump (noticed by @pq), bump it up to
8.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Suggested-by: Daniel Stone <daniel.stone@collabora.com>
In case the base EGLConfig is needed, gl_renderer_display_create() needs to
know it should use EGL_WINDOW_BIT or EGL_PBUFFER_BIT.
The PBUFFER case is added for when the headless backend will grow GL-renderer
support.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Define common_inc which includes both public_inc and the project root directory.
The project root directory will allow access to config.h and all the shared/
headers.
Replacing all custom '.', '..', '../..', '../shared' etc. include paths with
common_inc reduces clutter in the target definitions and enforces the common
#include directive style, as e.g. including shared/ headers without the
subdirectory name no longer works.
Unfortunately this does not prevent one from using private libweston headers
with the usual include pattern for public headers.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
When all shared/ headers are included in the same way, we can drop unnecessary
include seach paths from the compiler.
This include style was chosen because it is prevalent in the code base. Doing
anything different would have been a bigger patch.
This also means that we need to keep the project root directory in the include
search path, which means that one could accidentally include private headers
with
#include "libweston/dbus.h"
or even
#include <libweston/dbus.h>
IMO such problem is smaller than the churn caused by any of the alternatives,
and we should be able to catch those in review. We might even be able to catch
those with grep in CI if necessary.
The "bad" include style was found with:
$ for h in shared/*.h; do git grep -F $(basename $h); done | grep -vF '"shared/'
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Now that all backends pass in a list of acceptable DRM formats, that is used to
determine if the EGLConfig has an alpha channel or not. Therefore the
opaque_attribs and alpha_attribs are now useless, and we can remove the whole
config_attribs argument from the API.
gl_renderer_get_egl_config() uses an internal attrib list that matches at least
the union of the opaque_attribs and alpha_attribs matches.
Overall, behaviour should remain unchanged.
The new attribute array becomes variable in the future, so it is left
non-const.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Replace a direct call to egl_choose_config() with a higher level function
gl_renderer_get_egl_config(). This will make follow-up work easier when
attribute lists will be generated inside gl_renderer_get_egl_config() instead
of passed in as is.
We explicitly replace visual_id with drm_formats, because that is what they
really are. Only the DRM backend passes in other than NULL/0, and if other
backends start caring about the actual pixel format, drm_format is the lingua
franca.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
In an attempt to pull more of EGLConfig choosing into one place, refactor code
into the new gl_renderer_get_egl_config(). The purpose of this function is to
find an EGL config that not only satisfies the requested attributes and the
pixel formats if given but also makes sure the config is generally compatible
with the single GL context we have.
All this was already checked in gl_renderer_create_window_surface(), but
gl_renderer_create_pbuffer_surface() is still missing it. This patch is
preparation for fixing the pbuffer path.
We explicitly replace visual_id with drm_formats, because that is what they
really are. Only the DRM backend passes in other than NULL/0, and if other
backends start caring about the actual pixel format, drm_format is the lingua
franca.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Replace one more open-coded pixel format translation map with a call to our
central pixel format database, reducing duplication of format information.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
No caller ever used anything but NULL here, so just use NULL to simplify code.
In fact, no EGL platform defined today even defines any platform attributes
except the X11 platform for choosing a non-default SCREEN.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Currently, a check is missing for the case if the HDCP Content Type
property is requested, but is not supported by the driver.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
The member disable_planes of weston_output signifies the recording
status of the output, and is incremented and decremented from various
places. This patch provides helper functions to increment and decrement
the counter. These functions can then be used to do processing, before
and after the recording has started or stopped.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Currently drm-layer supports HDCP1.4 using connector property:
Content Protection. This property if available for a platform, can be
read and set for requesting content-protection.
Also, the patch series [1] adds HDCP2.2 support in drm, and patch [2]
adds support to send udev events for change in connector properties,
made by the kernel.
This patch adds these HDCP connector properties in weston, and exposes
the content-protection support to the client for drm-backend.
It adds the enums to represent 'Content Protection' and 'Content Type'
connector properties exposed by drm layer. It adds a member
'protection' in drm_output_state, to store the desired protection
from the weston_output in the drm-backend output-repaint cycle. This
is then used to write the HDCP connector properties for the drm_heads
attached to the drm_output.
The kernel sends uevents to the user-space for any change made by it
in the "Content Protection" connector property. No event is sent in
case of change in the property made by the user-space.
It means, when there is a change of the property value from "DESIRED"
to "ENABLE" i.e. successful authentication by the kernel, a uevent
will be generated, but in case of userspace requesting for disabling
the protection by writing "UNDESIRED" into the property, no uevent
will be generated.
This patch also adds support for handling new udev events for HDCP
connector property changes. Any such change, triggers change in the
weston_head's current_protection.
[1] https://patchwork.freedesktop.org/series/57233/#rev7
[2] https://patchwork.freedesktop.org/patch/303903/?series=57233&rev=7
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
62626cbfec ensures that the GL render will not render a view's content
to the screen when the surface has requested a higher content-protection
level than the output currently offers.
When the HDCP MR was split into the core content-protection support in !83
and specific DRM support for HDCP in !48 (not yet landed), this opened a
hole where the DRM backend could promote a view to a hardware plane,
even if the output offered a lower protection level than the surface
wanted to enforce.
In the DRM backend, check the desired protection level, and refuse to
promote the view to a hardware plane if the output does not offer
sufficient protection. This will lead to presentation falling back to
the renderer, which may censor the content, reduce quality, etc.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Fixes: 4b6e73d617 ("libweston: Add support to set content-protection for a weston_surface")
Introduce a new private header file that only internal backends are
allowed to use. Starts by migrating functions that operate on the
'struct weston_head'.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Introduce a new private header file that only internal parts of the
library are allowed to use and shouldn't be exposed in the public header
of libweston.
Start by adding by adding functions that operate on the 'weston_buffer*'.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
logind will send a device changed at start of day, prompting a session
active change, but the session will already be active from compositor
creation.
Avoid unnecessary signal emition and drm state invalidation.
The logind launcher sets the session active when the graphics device is
assigned to weston from systemd. Unfortunately 8d23ab78 didnt check whether the
session was already active before setting it active and emitting the session
active signal.
The handler for that signal then proceeds to invalidate the entire graphics
state, causing the next redraw to reconfigure all outputs (to the same routing
as they were already).
This then massively increases the likelihood of trying to configure a crtc that
has a commit already in flight.
Add the old behaviour of only emitting a signal on a changed state.
This avoids the issue for now by reducing the chances of a clash. Future
work will need to fix the issue properly (better handling of state_invalid e.g.
wait for quiescence, better monitoring for crtc usage clashes etc).
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Depending on system loading, weston-launcher could drop the drm
master access before the compositor and all the clients receive
the notification. In this case, some commit could be sent to the
drm driver too late and get refused with error EACCES.
This error condition is not properly managed and causes weston to
hang.
Change the return type of start_repaint_loop() and repaint_flush()
from void to int, and return 0 on success or -1 if the repaint has
to be cancelled.
In the callers of start_repaint_loop() and repaint_flush() handle
the return value and cancel the repaint when needed.
In backend-drm detect the error EACCES and return -1.
Note: to keep the code cleaner, this change inverts the execution
order between weston_output_schedule_repaint_reset() and
repaint_cancel().
No need to wait for suspend or for any notification; in case the
weston reschedules a repaint, it will get EACCES again.
At resume, damage-all guarantees a complete repaint.
This fix is for atomic modeset only.
Legacy modeset suffers from similar problems, but it is not fixed
by this change. Since drm_pending_state_apply() never returns
error for legacy modeset, this change has no impact on legacy
modeset.
Signed-off-by: Antonio Borneo <antonio.borneo@st.com>
Fixes: https://gitlab.freedesktop.org/wayland/weston/issues/117
The GBM and DRM constants have the same meaning. In preparation
to make the DRM backend compile without libgbm, prefer the DRM
constants where GBM is not needed.
Signed-off-by: Stefan Agner <stefan@agner.ch>
drm_assign_planes() is called to separate views out and decide what will
be taken out for plane composition and what will be left for the
renderer to compose.
It calls drm_output_propose_state() in order to find a good
configuration, which itself has a number of helpers that it calls. Break
these out into a separate file.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Most of the state helpers (create, destroy, duplicate, etc) state, are
relatively straightforward and can live in a separate file.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Create a new file which handles most of the actual KMS API use. This
covers the property handling (in which we map between KMS properties and
our internal representations), as well as actually applying state
through atomic modesetting or the legacy SetCrtc/PageFlip/DPMS APIs.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Create a new file for the DRM backend's handling of output modes, e.g.
resolution, aspect ratio, preferred mode selection, EDID parsing.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Create a helper function which populates a drm_head with the information
extracted from its connector's EDID and any other properties we can
find, such as physical size and connection status.
This is currently quite small, but may become more complex in future as
we parse EDID better. It also prepares to move this function into
another file in the next commit.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Create a new header called drm-internal.h, and move many of drm.c's
declarations and helpers to it.
This will allow us to split the DRM backend into multiple files.
Signed-off-by: Daniel Stone <daniels@collabora.com>
This fixes warnings for weston-debug, input, compositor, log and
linux-explicit-sync. Warnings range from swapping '[in]', '[out]' with
the function arguments to wrong parameter names.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
As of the previous commit, we never create state which uses overlay
planes on non-atomic drivers. We can thus remove the calls to
drmModeSetPlane.
The only time we ever waited for vblank events was when we had called
drmModeSetPlane and needed to make sure we waited until it was active.
We can thus also remove all the vblank event machinery.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Without atomic modesetting, we have no way to know whether or not our
desired configuration is usable. It might fail for a number of reasons:
scaling limits, bandwidth limits, global resource (e.g. decompression)
unit contention, or really just anything.
Not only this, but there is no good way to ensure that our configuration
actually lands together in the same refresh cycle - hence the 'atomic'
in atomic modesetting. Some drivers implement a synchronously blocking
drmModeSetPlane, whereas others return immediately. Using overlay planes
can thus decimate your framerate.
The pre-atomic API is not extensible either, so we need numerous out
clauses: fail if we're cropping or scaling (sometimes), or changing
formats, or fencing, or ...
Now we've had atomic support stable for a couple of releases, just
remove support for doing anything more fancy than displaying our
composited output and a cursor with drivers which don't support atomic
modesetting.
Support for using overlay planes was already disabled by default when
using the legacy API, and required a debug key combination to toggle it
on by flipping the sprites_are_broken variable. We can ensure that we
never try to use it on legacy by simply ignoring the hotkey when in
legacy mode.
Signed-off-by: Daniel Stone <daniels@collabora.com>
When using logind launcher, we receive a PauseDevice "gone" message
from logind session management for each device we close while looking
for KMS devices.
Make logind notify the backend of the device add/remove so that the
backend can decide what to do, instead of assuming that if it is a
DRM_MAJOR device the session should be (de)activated. The backend can
then react to its specific device.
Fixes#251
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
A output repaint loop isn't scheduled beacuse the output repaint_status
is AWAITING_COMPLETION when dmps is turned off in update_complete().
Therefore, the display attached to the output is remain inactive even if
weston wakes up. By going through finish_frame, the output
repaint_status is fixed to correct status.
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
Move the DRM-backend into a new sub-directory to make it stand out from
libweston core. This facilitates splitting drm.c into more files later.
vaapi-recorder is used only by DRM-backend, move that too.
libbacklight is used only by DRM-backend and a manual test program, and is
moved as well.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
