This option is used only with the DRM-backend. Options in weston.ini(5)
should be either generic or for backends that do not have their own man
page yet.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
We have a string helper which wraps asprintf(). Uses that one because it
clears out the destination string, but also it won't return the number
of bytes unlinke asprintf().
Fixes warnings like:
warning: ignoring return value of ‘asprintf’ declared with attribute
‘warn_unused_result’.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
weston_config_section_get_double() was not covered with tests before.
This patch follows the testing style already present in the file.
Cannot use ZUC_ASSERT_EQ() here, because that would convert the values
to integers before comparison. Luckily, simple strict equality
comparison works here, because we are testing conversion to float, not
the results of lossy calculations.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This was the only file in Weston using WL_EXPORT on its own line. Fix
the style to follow everything else.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Using `pixel_format_get_info()` can result in formats being
reported as `UNKNOWN` when used on compositors other than Weston.
As `weston-simple-dmabuf-feedback` somewhat succeeds `wayland-info`
as tool for `zwp_linux_dmabuf_v1` debugging from version 4 on, copy
the approach from the later for these cases.
Signed-off-by: Robert Mader <robert.mader@collabora.com>
These are supported by some other compositors already.
Add them to the list so `weston-simple-dmabuf-feedback`
reports them correctly.
Signed-off-by: Robert Mader <robert.mader@collabora.com>
The built-in backend of libseat requires users to enable a logging
level in order for libseat to start writing out log messages. For that
to happen we split out the info and error log level messages into the
compositor's log scope, while debug level messages go into a dedicated
scope.
With that, this patch brings in a new scope, called libseat-debug, which
users need to explicity create a subscription for it as to retrieve/have
access to debug message coming out of libseat. Note that by default we
have a subscription for the log-scope so any errors/info from libseat
would be displayed to the user.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Everywhere else where use this trick, we also have 'used' in the
attributes, except here. Make this consistent.
Fixes: https://gitlab.freedesktop.org/wayland/weston/-/issues/517
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Otherwise, the client will assume that dragging is in progress and remains in
that state forever.
This can happen when weston processes the mouse up event just before the
start_drag() arrives.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
When using the libseat launcher, there is one more detail to take care:
stop libseat from managing the VT.
A normal user does not have permissions to manage a VT, so launching
would just fail. In this use case you also do not want to be managing
the VT, because your normal desktop is already owning the seat
associated with the VT.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Give a little more details about how running Weston via ssh or serial
terminal is best done, now that launcher-direct and weston-launch are
gone.
Hopefully the removal of launcher-direct also makes less people run
Weston as root, when seatd is the privileged process. Running 'weston'
as root might still work through libseat's builtin backend without
seatd.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Now that launcher-direct and weston-launch are gone, libseat takes their
place.
Enable libseat support by default to give users a hint in case they miss
either of those.
People who used to get launcher-logind when libseat support was disabled
will now be using logind through libseat. This should not cause any
regressions, and if it does, we want to hear about them, because the
separate logind-launcher is also planned to be deprecated in the future.
Disabling logind-launcher by default is left for when it actually gets
deprecated.
In case someone does not have libseat available but do have logind
running, they can just disable libseat support.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This doesn't work with any of the launchers we've kept. Remove the option
and all the bits that handle it.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Moving forward we're going to be supporting libseat and logind as our
only launchers. We're doing this to reduce our maintenance burden,
and security impact.
Libseat supports all our existing use cases, and seatd can replace
weston-launch so we no longer have to carry a setuid-root program.
This patch removes weston-launch, and launcher-direct, leaving only
libseat and logind.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Fix a typo. No CM functional change, just redirect LCMS error
into created cmsContext which output into weston log.
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
This is probably the simplest case to demonstrate how to use
WESTON_EXPORT_FOR_TESTS.
Previously, vertex-clip test re-built vertex-clipping.c for itself. Now
it directly links in gl-renderer.so instead as that is where
vexter-clipping.c gets built into for actual use. This probably will not
work for any installed program, but luckily tests are never installed,
so Meson makes sure the DSO is found.
Unfortunately we cannot remove the definition of dep_vertex_clipping
yet, because clients/cliptest.c needs it.
This makes vertex-clip test depend on GL-renderer, but that is where the
code is really used.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This is a new function exporting macro that intends to make writing unit
tests in the Weston test suite easier.
A test needs to access a private function to be able to verify its
behavior. Previously we have used things like putting such functions in
a separate .c file and then building that file into the corresponding
test. That is a bit awkward and can lead to proliferation of arbitrary
.c files for no good reason. It may also require pre-processor magic,
and sometimes copying chunks of code causing a risk of deviating the
code being tested from the code actually used.
This patch proposes another approach: a private export from a DSO.
Except, private exports do not really exist, and this is just a normal
export with a specific C macro, and omitting the function from public
headers.
Once exported, a test program can link the DSO during build, be that a
shared library or even a plugin, use the private header declaring the
function, and simply call the function in the test.
The declaration of WESTON_EXPORT_FOR_TESTS is in shared/helpers.h so
that it is available to all components equally while still not being in
a public header. Other places that were considered:
- include/libweston/libweston.h is a public header, but external users
should not know about the macro.
- libweston/libweston-private.h is too private and not available to all
components, particularly color-lcms plugin.
- libweston/backend.h is not appropriate for color-lcms plugin either.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Although weston_compositor_run_key_binding() is called when the current
keyboard grab is default_grab or input_method_grab, swallowing the key
event is processed only on default_grab. As a result key events that
should be swallowed are sent to the input method unexpectedly.
For example, when a user press `Super + s` on weston-editor to take a
screen shot, `s` will be unexpectedly entered to the text area.
I confirmed such behaviour with weston-simple-im and fcitx5-5.0.10.
It doesn't occur with weston-keyboard because it doesn't install
keyboard grab.
Signed-off-by: Takuro Ashie <ashie@clear-code.com>
Iterate over rgb[] array instead of repeating the code for .r, .g and
.b.
Also in process_pipeline_comparison() f_max_err variable is dropped
since it was not used much.
This should make the code easier to read.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Individual struct fields are inconvenient to index into, yet most
operations on a color just repeat the same for each of RGB channel.
Being able to index into RGB avoids repeating the same code for each
channel.
Alpha channel is left as separate, since it is almost never handled the
same as RGB.
The union keeps the old .r, .g and .b addressing working. The static
asserts ensure the aliasing is correct.
For demonstration, two simple functions in color_util.c are converted.
Unfortunately initializers need to be corrected everywhere. Field .a is
not explicitly initialized because it is unused in these cases.
This change should make code easier to read.
This change requires gnu99 or c11 standard. gnu99 is already the default
in top-level meson.build.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Given that the test-helper code relies on the screenshooter protocol,
make sure it's available for us to build, and the dependency ensures we
build in order.
Fixes: #588
Signed-off-by: Daniel Stone <daniels@collabora.com>
In certain situations these clients crash a lot due to the low
buffer limit. Four buffers is also what EGL allows without blocking
and what is arguably the upper limit of what a compositor should
demand.
Signed-off-by: Robert Mader <robert.mader@collabora.com>
1. Use fixture_setup to set the generated by LCMS output profile based on
given chromaticities and white points. The following list of well known
chromaticities:
- sRGB
- adobe RGB
- bt2020
and white point is D65. Use INTENT_ABSOLUTE_COLORIMETRIC to avoid BPC.
Input profile is always sRGB and it is used internally by Weston as
stock profile.
2. Use these hardcoded matrixes as part of pipeline 1DLUT->3x3->1DLUT.
The diagnostic code to retrieve the transform matrix is availble into
test in the comments. The conversion matrixes generated for the
following cases:
- sRGB to sRGB (unity)
- sRGB to adobeRGB
- sRGB to BT2020
3. Compare GPU shaders(gl texture3D) vs manual pipeline calculation
Use different max tolerable error per transform.
There are comments how number of points in 3DLUT is related to tolerance.
Tolerance depends more on the 1D LUT used for the inv EOTF than
the tested 3D LUT size: 9x9x9, 17x17x17, 33x33x33, 127x127x127.
4. Enable build matrix-shaper test if color-management-lcms is enabled.
Co-authored-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Use 3D LUT for color mapping.
For category CMLCMS_CATEGORY_INPUT_TO_BLEND use transform which has
3 profiles: input, output and light linearizing transfer function.
For category CMLCMS_CATEGORY_INPUT_TO_OUTPUT use input and output profiles +VCGT.
For category CMLCMS_CATEGORY_BLEND_TO_OUTPUT use output inverse EOTF + VCGT.
Co-authored-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Graeme sketched a linearization method there:
https://lists.freedesktop.org/archives/wayland-devel/2019-March/040171.html
Sebastian prototyped there:
https://gitlab.freedesktop.org/wayland/wayland-protocols/-/merge_requests/14/commits
Thanks to Pekka for great simplifications in implementation, like the xyz_dot_prod()
Quote: "should help untangle lots of the multiplications and summations by saying
we are computing dot products, etc".
The approach was validated using matrix-shaper and cLUT type of profiles.
If profile is matrix-shaper type then an optimization is applied.
The extracted EOTF is inverted and concatenated with VCGT, if it is availible.
Introduce function cmlcms_reasonable_1D_points which would be shared between
linearization method and number of points in 1DLUT for the transform.
Co-authored-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Co-authored-by: Sebastian Wick <sebastian@sebastianwick.net>
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Add to search parameter cmlcms_category, input and output profiles,
and render intent for output which would be used for both profiles.
Add common function setup_search_param for every category.
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
The stock profile would be used when client or output
do not provide any profile or unaware of color management.
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
1. The cmlcms_category is used to identify the purpose of transform:
- CMLCMS_CATEGORY_INPUT_TO_BLEND
- CMLCMS_CATEGORY_BLEND_TO_OUTPUT
- CMLCMS_CATEGORY_INPUT_TO_OUTPUT
2. Added following fields to cmlcms_color_profile:
- output_eotf - If the profile does support being an output profile and it
is used as an output then this field represents a light linearizing
transfer function and it can not be null. The field is null only if
the profile is not usable as an output profile. The field is set when
cmlcms_color_profile is created.
- vcgt - VCGT tag cached from output profile, it could be null if not exist
- output_inv_eotf_vcgt - if the profile does support being an output profile and it
is used as an output then this field represents a concatenation of inverse
EOTF + VCGT, if the tag exists and it can not be null.
3. Added field cmsHTRANSFORM to cmlcms_color_transform.
It is used to store LCMS optimized pipeline.
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
The following GL extensions provide support for shaders CM:
-GL_OES_texture_float_linear makes GL_RGB32F linear filterable.
-GL ES 3.0 provides Texture3D support in GL API.
-GL_OES_texture_3D provides sampler3D support in ESSL 1.00.
If abovesaid is supported then renderer sets flag WESTON_CAP_COLOR_OPS
which means that all fields in struct weston_color_transform are
supported, for example, 1DLUT and 3DLUT.
Use GL_OES_texture_3D to implement 3DLUT function which
uses trilinear interpolation for pixel processing or bypass as is.
Quote from https://nick-shaw.github.io/cinematiccolor/luts-and-transforms.html
"3D LUTs have long been embraced by color scientists and are one of
the tools commonly used for gamut mapping. In fact, 3D LUTs are used
within ICC profiles to model the complex device behaviors necessary
for accurate color image reproduction".
Quote from https://developer.nvidia.com/gpugems/gpugems2/part-iii-high-quality-rendering/
chapter-24-using-lookup-tables-accelerate-color
is about interpolation: "By generating intermediate results based
on a weighted average of the eight corners of the bounding cube,
this algorithm is typically sufficient for color processing,
and it is implemented in graphics hardware".
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Introduce shader color mapping identity and 3D LUT.
Shader requirements struct uses union for color mapping
to prepare the place for 3x3 matrix.
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Introduce 3D LUT definition as part of Weston
color transform struct. A 3D LUT is a LUT containing
entries for each possible RGB triplets.
Co-authored-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Add VGEM to the Linux image that runs in the CI. There are tests that we
plan to add in the future that need this.
This brings a complication, as we already have VKMS in the image. The
order in which DRM devices are loaded is not always the same, so the
node they receive is non-deterministic. Until now we were sure that VKMS
(the virtual device we use to run the DRM-backend tests in the CI) would
be in "/dev/dri/card0", but now we can't be sure. To deal with this
problem we find the node of each device using a one-liner shell script.
This commit also updates the documentation section that describes
specificities of DRM-backend tests in our test suite.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Make it slightly easier to disambiguate clients when we log the protocol
stream from the server side.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Name the seat created by the screen share plugin "screen-share" instead of
"default", to make it easier to recognize. No functional change intended.
Signed-off-by: Marek Vasut <marex@denx.de>
Test different scenarios where child subsurfaces of unmapped
subsurfaces would get mapped. This test will fail in various
ways without the commit
"libweston/compositor: Do not map subsurfaces without buffer"
Also try to test potential regressions of that patch.
Signed-off-by: Robert Mader <robert.mader@collabora.com>
We can end in `subsurface_committed()` in different scenarios
without the surface having an attached buffer. While setting
the mapped state to `true` in that case doesn't matter for
that (sub)surface itself, it triggers its own child subsurfaces
to get mapped when they shouldn't.
Closes https://gitlab.freedesktop.org/wayland/weston/-/issues/426
Signed-off-by: Robert Mader <robert.mader@collabora.com>
With commit 'compositor: Remove desktop zoom' weston_output_zoom was removed
from weston_output thus needing a libweston major bump.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Suggested-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This isn't about opening new windows but the start-up animation
that desktop-shell does when it is being brought on/started.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Users should rely on wayland-info from wayland-utils [1] instead.
We've been printing a deprecation since 85382d394a ("clients:
deprecate weston-info"), so users should be aware already.
[1]: https://gitlab.freedesktop.org/wayland/wayland-utils/
Signed-off-by: Simon Ser <contact@emersion.fr>
