Make GBM optional in case GL renderer is disabled. This allows to
build Weston with DRM backend without Mesa dependencies.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Move DRM virtual support into a separate file. Use the remoting
compile time option to disable DRM virtual support since this is the
only user of DRM virtual support currently. This will make it easier
to build the DRM backend without GBM support.
Signed-off-by: Stefan Agner <stefan@agner.ch>
This is preparation for disallowing unresolved symbols project-wide.
This is a temporary fix that should be reverted and fixed properly later.
/usr/bin/ld: libweston/backend-rdp/13a5658@@rdp-backend@sha/rdp.c.o: in function `rdp_peer_context_new':
/home/pq/build/weston-meson/../../git/weston/libweston/backend-rdp/rdp.c:748: undefined reference to `Stream_New'
/usr/bin/ld: libweston/backend-rdp/13a5658@@rdp-backend@sha/rdp.c.o: in function `rdp_peer_context_free':
/home/pq/build/weston-meson/../../git/weston/libweston/backend-rdp/rdp.c:781: undefined reference to `Stream_Free'
/usr/bin/ld: libweston/backend-rdp/13a5658@@rdp-backend@sha/rdp.c.o: in function `xf_input_keyboard_event':
/home/pq/build/weston-meson/../../git/weston/libweston/backend-rdp/rdp.c:1220: undefined reference to `GetVirtualKeyCodeFromVirtualScanCode'
/usr/bin/ld: /home/pq/build/weston-meson/../../git/weston/libweston/backend-rdp/rdp.c:1224: undefined reference to `GetKeycodeFromVirtualKeyCode'
/usr/bin/ld: libweston/backend-rdp/13a5658@@rdp-backend@sha/rdp.c.o: in function `weston_backend_init':
/home/pq/build/weston-meson/../../git/weston/libweston/backend-rdp/rdp.c:1469: undefined reference to `winpr_InitializeSSL'
See also #262
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Make the libweston dependency objects pull in only those secondary dependencies
that are actually used in the API. This way in-tree users of libweston link to
fewer libraries needlessly, and it matches better what external users get via
pkg-config.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
9ddb3bc315 started using drm_fourcc.h but forgot
to add libdrm headers to the dependencies.
This fixes the build for build-native-meson-no-gl-renderer when a future patch
reduces the dependencies pulled in by the libweston dependency object.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
In the future libweston will stop providing it for its users, since it's not
part of libweston API.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
In the future libweston will stop providing it for its users, since it's not
part of libweston API.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
We have two kinds of libweston users: internal and external. Weston, the
frontend, counts as an external user, and should not have access to libweston
private headers. The shell plugins are external users as well, because we
intend people to be able to write them. Renderers, backends, and some plugins
are internal users who will need access to private headers.
Create two different Meson dependency objects, one for each kind.
This makes it less likely to accidentally use a private header.
Screen-share is a Weston plugin and therefore counts as an external user, but
it needs the backend API to deliver input. Until we are comfortable exposing
public API for that purpose, let it use internal headers.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
If the gl-renderer is disabled build fails with:
../libweston/backend-headless/headless.c:394:9: error:
‘EGL_PLATFORM_SURFACELESS_MESA’ undeclared (first use in this function)
Fix this by including shared/weston-egl-ext.h.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Use doxygen ingroup command as to show the symbols in the sphinx
documentation.
Include some basic comments and document the exported functions from
timeline.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
We notify the timeline of the fact that the object suffered
modifications through the 'set_label' function. Remove the old
refresh variable.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
With the timeline scope being created it is time to convert TL_POINT()
to use the timeline scope through the compositor instance.
This patch removes the global variable allowing to run the new timeline
code.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
An object based on 'weston_timeline_subscription' will be created for
each subscription created. It contains the next object ID and list of
'weston_timeline_subscription_object'.
It will automatically be cleaned by the logging framework when the
subscription gets destroyed, or use the object destroy signal to trigger
the destruction of the timeline subscription (@pq), when the object
itself is being destroyed.
This class will hanged-off the subscription, such that we can
retrieve it when going over all the subscriptions.
An object based on 'weston_timeline_subscription_object' will help
maintain the state of the objects seen and will be created when a new
object will be emitted for a particular 'weston_timeline_subscription'.
Adds wrappers for ensuring the timeline subscription object is created
or has to be searched in order to be found, as to avoid duplicated code.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Suggested-by: Daniel Stone <daniel.stone@collabora.com>
With it this removes the parts responsible for creating the file,
timeline_log class, removes the debug key binding when creating the
compositor instace, keeping only what can be re-used.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Helper to retrieve next available subscription as to avoid exposing the
subscription, which is an opaque (internal) class of the logging
framework.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Suggested-by: Daniel Stone <daniel.stone@collabora.com>
As 'new_subscription' can create additional objects, 'destroy_subscription'
will be needed when cleaning up.
As this requires a libweston_major bump (noticed by @pq), bump it up to
8.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Suggested-by: Daniel Stone <daniel.stone@collabora.com>
The callback is executed when the subscription is created, so it doesn't
really have a proper name.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Commit 284d5345ad introduced a new tear_down function for the
compositor, it seems we missed a comment reference for it.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
ubsan doesn't like what we were doing here:
../libweston/compositor.c:3021:21: runtime error: signed integer overflow: -2147483648 + -1 cannot be represented in type 'int'
Rather than try to be clever in invoking weston_layer_set_mask, just build the
maximal mask explicitly.
weston_compositor_build_view_list can reconstruct the view_list without a view which was
previously in it. The existing pointers in view->link are left unchanged, which could
lead to corruption or access to released memory in wl_list_remove, depending of the
order of destruction of the views.
This can happen at least with the black view created by the desktop shell for fullscreen
surfaces, when it is hidden in lower_fullscreen_layer.
Signed-off-by: Loïc Yhuel <loic.yhuel@softathome.com>
Use the surfaceless platform in the headless backend to initialize the
GL-renderer and create pbuffer outputs. This allows headless backend to use
GL-renderer, even hardware accelerated.
This paves way for exercising GL-renderer in CI and using the Weston test suite
to test hardware GL ES implementations.
Relates to: https://gitlab.freedesktop.org/wayland/weston/issues/278
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This ensures that all function pointers we do not fill in will be NULL.
I had a crash in the Xwayland test with
https://gitlab.freedesktop.org/wayland/weston/merge_requests/274 without this,
because import_dmabuf was garbage.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This allows passing EGL_PLATFORM_SURFACELESS_MESA to
gl_renderer_display_create(). It is not useful on its own, because the
surfaceless platform has no window surfaces.
This feature will be used by the headless backend.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
In case the base EGLConfig is needed, gl_renderer_display_create() needs to
know it should use EGL_WINDOW_BIT or EGL_PBUFFER_BIT.
The PBUFFER case is added for when the headless backend will grow GL-renderer
support.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Since the RDP backend allocates regular memory already as hw buffer
anyway, a shadow buffer is not required. The read_pixels interface
anyway renders directly into the hardware buffer, hence this does
not make a performance difference in practise. It avoids allocating
an unnecessary buffer.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Define common_inc which includes both public_inc and the project root directory.
The project root directory will allow access to config.h and all the shared/
headers.
Replacing all custom '.', '..', '../..', '../shared' etc. include paths with
common_inc reduces clutter in the target definitions and enforces the common
#include directive style, as e.g. including shared/ headers without the
subdirectory name no longer works.
Unfortunately this does not prevent one from using private libweston headers
with the usual include pattern for public headers.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
When all shared/ headers are included in the same way, we can drop unnecessary
include seach paths from the compiler.
This include style was chosen because it is prevalent in the code base. Doing
anything different would have been a bigger patch.
This also means that we need to keep the project root directory in the include
search path, which means that one could accidentally include private headers
with
#include "libweston/dbus.h"
or even
#include <libweston/dbus.h>
IMO such problem is smaller than the churn caused by any of the alternatives,
and we should be able to catch those in review. We might even be able to catch
those with grep in CI if necessary.
The "bad" include style was found with:
$ for h in shared/*.h; do git grep -F $(basename $h); done | grep -vF '"shared/'
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
matrix.c needs to be built differently for a test program vs. everything else,
so it cannot be in a helper lib. Instead, make a dependency object for it for
easy use which always gets all the paths correct automatically.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Replace the old config printer with the new fancy one: less duplicate code,
more details logged.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Print details of all available EGLConfigs in case none match what we are
looking for. This helps debugging.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
If configless_context is not supported, we pick one EGLConfig as the "base
config" because we have just one GL context and different configs between the
context and EGLSurfaces might not work. Until now, we did not actually make
sure to pick the base config.
If the base config matches the requirements, prefer it. Only if it doesn't
match, go looking for another config.
This should give better chances of success on systems where configless_context
is not supported by relying less on eglChooseConfig().
Cc: Madhurkiran Harikrishnan <madhurkiran.harikrishnan@xilinx.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
If we don't have the surfaceless_context extension, we create a pbuffer as a
dummy surface to work with. If we also don't have configless_context, then it
is possible the config used for creating the context does not support pbuffers.
Therefore, if both conditions apply, we need to pick a config that supports
both window and pbuffer surfaces.
This makes the "base" config compatible, but it does not yet guarantee that we
actually pick it again when creating the pbuffer surface. Fixing that is
another patch.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Fold more code into the common config choosing, the pbuffer path this time.
Simplifies code and allows gl_renderer_get_egl_config() to grow smarter in the
future to guarantee config compatility in the absence of configless_context
extension.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Now that all backends pass in a list of acceptable DRM formats, that is used to
determine if the EGLConfig has an alpha channel or not. Therefore the
opaque_attribs and alpha_attribs are now useless, and we can remove the whole
config_attribs argument from the API.
gl_renderer_get_egl_config() uses an internal attrib list that matches at least
the union of the opaque_attribs and alpha_attribs matches.
Overall, behaviour should remain unchanged.
The new attribute array becomes variable in the future, so it is left
non-const.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Define a specific DRM format for the GL-renderer to render in. It goes through
fuzzy matching in egl-glue.c which ensures we get exactly the number of bits
for each channel, but does not require an exact format match.
This ensures we get the bit depth we expect instead of the first arbitrary
EGLConfig.
This should not change the current behaviour, because Mesa EGL takes care to
order the configs as apps expect.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Define a specific DRM format for the GL-renderer to render in. It goes through
fuzzy matching in egl-glue.c which ensures we get exactly the number of bits
for each channel, but does not require an exact format match.
This ensures we get the bit depth we expect instead of the first arbitrary
EGLConfig.
This should not change the current behaviour, because Mesa EGL takes care to
order the configs as apps expect.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Implement fuzzy EGLConfig pixel format matching, where we ensure that R, G, B
and A channels have the expected number of bits exactly. This is used on EGL
platforms where the EGLConfig native visual ID is not a DRM format code. On EGL
GBM platform, the old exact matching of native visual ID is kept.
As only the DRM backend uses a DRM format list for picking a config, this patch
should not change any behaviour.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Using arrays of pixel_format_info instead of just DRM format codes is useful
for fuzzy matching of formats with EGLConfigs in the future. The immediate
benefit is that we can easily print format names in log messages.
We should never deal with formats we don't have in our database, so discarding
unknown formats should be ok. Using unknown formats would become hard later,
too.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
These fields are necessary when looking for an EGLConfig matching a pixel
format, but the configs do not expose a native visual id. Such happens on the
EGL surfaceless platform where one does not actually care about the exact pixel
format, one just cares it has the right number of bits for each channel and the
right component type.
FP16 formats are coming, so this paves way for them too, allowing them to be
described.
The FIXED/FLOAT terminology comes from EGL_EXT_pixel_format_float.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
If configless context is supported, we can skip choosing the "base" config
completely as it will never be used.
This simplifies the code a little bit.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Replace a direct call to egl_choose_config() with a higher level function
gl_renderer_get_egl_config(). This will make follow-up work easier when
attribute lists will be generated inside gl_renderer_get_egl_config() instead
of passed in as is.
We explicitly replace visual_id with drm_formats, because that is what they
really are. Only the DRM backend passes in other than NULL/0, and if other
backends start caring about the actual pixel format, drm_format is the lingua
franca.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
In an attempt to pull more of EGLConfig choosing into one place, refactor code
into the new gl_renderer_get_egl_config(). The purpose of this function is to
find an EGL config that not only satisfies the requested attributes and the
pixel formats if given but also makes sure the config is generally compatible
with the single GL context we have.
All this was already checked in gl_renderer_create_window_surface(), but
gl_renderer_create_pbuffer_surface() is still missing it. This patch is
preparation for fixing the pbuffer path.
We explicitly replace visual_id with drm_formats, because that is what they
really are. Only the DRM backend passes in other than NULL/0, and if other
backends start caring about the actual pixel format, drm_format is the lingua
franca.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Start a new source file for EGL glue stuff, for the EGL platform Weston runs
on. gl-renderer.c is getting too long, and I want to add even more boring code
(config pretty-printing etc.).
This pure code move, no changes.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Some extensions (such as EGL_KHR_partial_update) add functions to EGL.
When the extension is present, GetProcAddress must return usable
function pointers for those entrypoints.
Assert that GetProcAddress returns a non-NULL function pointer in these
cases.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Some drivers support EGL_EXT_image_dma_buf_import_modifiers for format
enumeration, but don't have any modifiers. In this case, on platforms where
malloc(0) returns non-NULL, we would leak that allocation to the caller.
Handle this by noticing when the number of supported modifiers is 0 and
returning early.
Replace one more open-coded pixel format translation map with a call to our
central pixel format database, reducing duplication of format information.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
No caller ever used anything but NULL here, so just use NULL to simplify code.
In fact, no EGL platform defined today even defines any platform attributes
except the X11 platform for choosing a non-default SCREEN.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This became unused in:
commit e77f8ad79b
Author: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Date: Wed Jun 8 17:39:37 2016 +0300
compositor-fbdev: drop EGL support
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
For supporting output layout, compositors need the ability to manually set the
'weston_output' by 'weston_output_move'.
Signed-off-by: sichem <sichem.zh@gmail.com>
Currently, a check is missing for the case if the HDCP Content Type
property is requested, but is not supported by the driver.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
In case of enforced protection mode, the renderer takes care of
censoring the protected content when the output recording is going on.
But in case of relaxed protection mode, the client must be notified to
avoid showing the protected content, if the output recording is on.
This patch handles the case, where the content-protection is enabled
with relaxed protection mode, and notifies the client, whenever the
recording is started or stopped.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Contents on an ouput are captured when screenshooter/recorder/screen
sharing is enabled. In such cases the protected content must
be censored to ensure that it is not recorded along with unprotected
content. This is a required only when the surface protection is in
enforced mode.
Signed-off-by: Harish Krupo <harishkrupo@gmail.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Currently, the idle task for updating surface protection is scheduled
in case of change in the output mask of a surface or in case of change
in protection status of an output.
This patch adds a function for reusing the code to schedule the
idle-tasks, that can be called whenever there is a chance of a change
in the protection status of a surface.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
The member disable_planes of weston_output signifies the recording
status of the output, and is incremented and decremented from various
places. This patch provides helper functions to increment and decrement
the counter. These functions can then be used to do processing, before
and after the recording has started or stopped.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Currently drm-layer supports HDCP1.4 using connector property:
Content Protection. This property if available for a platform, can be
read and set for requesting content-protection.
Also, the patch series [1] adds HDCP2.2 support in drm, and patch [2]
adds support to send udev events for change in connector properties,
made by the kernel.
This patch adds these HDCP connector properties in weston, and exposes
the content-protection support to the client for drm-backend.
It adds the enums to represent 'Content Protection' and 'Content Type'
connector properties exposed by drm layer. It adds a member
'protection' in drm_output_state, to store the desired protection
from the weston_output in the drm-backend output-repaint cycle. This
is then used to write the HDCP connector properties for the drm_heads
attached to the drm_output.
The kernel sends uevents to the user-space for any change made by it
in the "Content Protection" connector property. No event is sent in
case of change in the property made by the user-space.
It means, when there is a change of the property value from "DESIRED"
to "ENABLE" i.e. successful authentication by the kernel, a uevent
will be generated, but in case of userspace requesting for disabling
the protection by writing "UNDESIRED" into the property, no uevent
will be generated.
This patch also adds support for handling new udev events for HDCP
connector property changes. Any such change, triggers change in the
weston_head's current_protection.
[1] https://patchwork.freedesktop.org/series/57233/#rev7
[2] https://patchwork.freedesktop.org/patch/303903/?series=57233&rev=7
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
62626cbfec ensures that the GL render will not render a view's content
to the screen when the surface has requested a higher content-protection
level than the output currently offers.
When the HDCP MR was split into the core content-protection support in !83
and specific DRM support for HDCP in !48 (not yet landed), this opened a
hole where the DRM backend could promote a view to a hardware plane,
even if the output offered a lower protection level than the surface
wanted to enforce.
In the DRM backend, check the desired protection level, and refuse to
promote the view to a hardware plane if the output does not offer
sufficient protection. This will lead to presentation falling back to
the renderer, which may censor the content, reduce quality, etc.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Fixes: 4b6e73d617 ("libweston: Add support to set content-protection for a weston_surface")
This was caused by weston_wm_handle_xfixes_selection_notify() calling
weston_seat_set_selection() with a NULL source, apparently only
sometimes when closing an Xwayland window.
Although we already supported minor version 2 of the explicit sync
protocol, we couldn't advertise it previously, since it was not in any
released version of wayland-protocols. With the release of
wayland-protocols 1.18, which includes minor version 2 of this protocol,
and the recent update in weston to require 1.18, we can now safely
advertise minor version 2.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Commit 4fc5dd0099 ("compositor: add capability CAPTURE_YFLIP")
introduced a capability flag which indicates whether y-flipping is
necessary. As already indicated in that commit message, it seems
that pixman flipps the y-axis only due to historic reasons.
Drop y-flipping and use the WESTON_CAP_CAPTURE_YFLIP flag to
indicate that y-flipping is not necessary. This simplifies code
and improves screen share performance (on my test by about 3% down
to 18% CPU load on the sharing instance of Weston).
Signed-off-by: Stefan Agner <stefan@agner.ch>
Adds initial grouping for sphinx/breathe for the logging/debugging
framework. We add a few groups: log (public API), internal-log (private API,
not exported) and debug-protocol, specific to the weston
debug protocol.
In latest version of breathe, '\memberof' command is recognized as such.
But it conflicts with '\ingroup' command and can't be used in the same
time (leading to duplicate symbols), so we follow a simple rule: object
tagging with '\ingroup' then use '\memberof' command for the functions
that work on that object.
There's also a caveat here: we have objects that are private (opaque)
but the functions are public. For those cases we resort to using
'internal-log' for the object (class) and 'log' for the functions.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
We have dedicated header for the internal parts of the logging
framework, use that for the set-up part instead of the libweston public
API header.
Further more this removes weston_vlog() from public header as well and
moves them to weston-log-internal.h file.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Like a black box in an airplane, the flight recorder can be used to
accumulate data and, when needed, to display its contents.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Avoids a potential dependency on the log scope being set-up before
actually creating the scope. Destroy part of the log context could
suffer from the same issue if the log scope is destroyed before.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Destroying the compositor after destroying the log scope will not print
out the messages in the tear down/clean-up phase of the compositor, so
add a new tear_down function which allows keeping a valid reference to
the compositor. This way we can destroy the compositor before destroying
the scope and keep the debug messages.
While at it remove the log context destroy part from the clean-up
of the compositor and make it stand on its own.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
With the logging infrastructure in place this patch add a new user: file
type of stream backed-up by a std file descriptor.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Rather than using 'begin_cb' rename it to a more suitable name.
Further more instead of using the scope use the subscription to pass as
an argument. The source scope is attached to the subscription when
creating it so we can access it that way.
This also adds a _complete and a _printf method for the subscription
such that the callbacks can use to write data to only _that_
subscription and to close/complete it, otherwise writing to a scope
results in writing to all subscriptions for that scope which is not
correct.
In the same time, the scope counter-parts of _write and _complete will
now use the subscription function as well.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Suggested-by: Daniel Stone <daniels@collabora.com>
This avoids duplicated bits, by calling the scopes's callback (if any)
and adding the subscription to the scope's subscription list. Further
more, the scope's name when creating the subscription is not needed so
removed that as well.
In mirror, also inline removing of subscription for scope's subscription
list. Fix a potential corner case when the user can request a
subscription to an invalid scope in stream_destroy().
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
As described in e10c9f89826bb: "weston-debug: Introduce...", the
subscriber object need further functionality to make use of it.
Current form of the weston-debug protocol would not need this, as it
creates underneath a new subscriber each time a client connects and
subscriptions are created/destroyed automatically with the help of
wayland protocol. For other types of streams, we require to manually
create a subscriber and to subscribe to log scopes.
This patch introduces the ability to create subscriptions, and
implicitly to subscribe to (previously created) scopes.
In the event the scope(s) are not created we temporary store the
subscription as a pending one: a subscription for which a scope doesn't
exist at the time of the subscription. When the scope for which the
subscription has been created we take care to create the subscription as
well.
While at it the documentation bits are modified accommodate the subscribe
method and its further functionality.
Lastly, it removes an unlikely case when a scope is not created so we
avoid any kind of dandling (pending) subscription in case there is
subscription to it. We can only do something about in the destroy part
of the scope.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Suggested-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Adds a minimalistic API for managing the subscription object. The
subscribe functionality will be brought in once we re-organize a bit
weston-debug-stream and split it properly. It extends the logging
context with a linked list of potential subscription and adds a linked
list of subscriptions in the log scope.
This patch represents the start of a logging framework for weston. It's
being built around weston-debug, with the intent to superseded it, and
make weston-debug a client of the framework. Further more the logging
framework should replace current logging handler and allow other types
of streams to be used.
Currently present in libweston under weston-debug we have log scopes, debug
streams and a logging context.
With this patch, two (internal) objects are being added: the concept of
a subscriber and the concept of subscription. The subscription object
is a ephemeral object, implicitly managed which is created each time one
would want to a subscribe to a scope. The scope will maintain a list of
subscriptions and will continue to be explicitly managed.
The streams will use the subscriber object as a base class to extend
upon. By doing so it allows to customize the stream with specific
functions that manipulate the underlaying storage. The subscriber object
will require a subscribe function and specific stream functions and like
the scope, will be explicitly managed.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Suggested-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Introduce a new private header file that only internal backends are
allowed to use. Starts by migrating functions that operate on the
'struct weston_head'.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Introduce a new private header file that only internal parts of the
library are allowed to use and shouldn't be exposed in the public header
of libweston.
Start by adding by adding functions that operate on the 'weston_buffer*'.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
logind will send a device changed at start of day, prompting a session
active change, but the session will already be active from compositor
creation.
Avoid unnecessary signal emition and drm state invalidation.
The logind launcher sets the session active when the graphics device is
assigned to weston from systemd. Unfortunately 8d23ab78 didnt check whether the
session was already active before setting it active and emitting the session
active signal.
The handler for that signal then proceeds to invalidate the entire graphics
state, causing the next redraw to reconfigure all outputs (to the same routing
as they were already).
This then massively increases the likelihood of trying to configure a crtc that
has a commit already in flight.
Add the old behaviour of only emitting a signal on a changed state.
This avoids the issue for now by reducing the chances of a clash. Future
work will need to fix the issue properly (better handling of state_invalid e.g.
wait for quiescence, better monitoring for crtc usage clashes etc).
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Depending on system loading, weston-launcher could drop the drm
master access before the compositor and all the clients receive
the notification. In this case, some commit could be sent to the
drm driver too late and get refused with error EACCES.
This error condition is not properly managed and causes weston to
hang.
Change the return type of start_repaint_loop() and repaint_flush()
from void to int, and return 0 on success or -1 if the repaint has
to be cancelled.
In the callers of start_repaint_loop() and repaint_flush() handle
the return value and cancel the repaint when needed.
In backend-drm detect the error EACCES and return -1.
Note: to keep the code cleaner, this change inverts the execution
order between weston_output_schedule_repaint_reset() and
repaint_cancel().
No need to wait for suspend or for any notification; in case the
weston reschedules a repaint, it will get EACCES again.
At resume, damage-all guarantees a complete repaint.
This fix is for atomic modeset only.
Legacy modeset suffers from similar problems, but it is not fixed
by this change. Since drm_pending_state_apply() never returns
error for legacy modeset, this change has no impact on legacy
modeset.
Signed-off-by: Antonio Borneo <antonio.borneo@st.com>
Fixes: https://gitlab.freedesktop.org/wayland/weston/issues/117
Unfortunately, our y_invert helper also forgot to free the region it
transformed to. Clean up our allocation before we exit.
Signed-off-by: Daniel Stone <daniels@collabora.com>
In 55bcb93fef ("gl-renderer: Use helper for conversion to EGL rects"),
we extracted and lovingly commented the transformation from global to
output co-ordinate space used for EGL_KHR_swap_buffer_with_damage, into
a new helper function.
The commenting correctly noted the steps we need to perform the
transformation: shifting by the output's offset into global space,
followed by applying the output's scale and rotation transformations.
Unfortunately, the code did not live up to the high standards of the
comment, and forgot to translate by the output's offset. This meant that
for multiple outputs, we would probably end up with wildly out-of-bounds
co-ordinates.
Fix the code to first translate by the output's offset in global space,
ensuring that both our swap_buffers_with_damage, and our partial_update
co-ordinate sets, can spark joy for those blessed with more than one
output.
Signed-off-by: Daniel Stone <daniels@collabora.com>
The GBM and DRM constants have the same meaning. In preparation
to make the DRM backend compile without libgbm, prefer the DRM
constants where GBM is not needed.
Signed-off-by: Stefan Agner <stefan@agner.ch>
The content protection protocol requires that in enforced mode, parts of the
surfaces which lie on outputs with protection level lower than that of the surface
be censored. This patch uses a solid shader to color such regions with
dark red.
Signed-off-by: Harish Krupo <harishkrupo@gmail.com>
This patch enables a user to opt for HDCP per output, by writing into
the output section of weston.ini configuration file. HDCP is always
enabled by default for the outputs.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
The change in an output's content-protection may trigger a change in
the surface's content-protection status, and inturn the
content-protection available for the client.
This patch recomputes the content-protection level for a surface,
in case there is a change in content-protection level of an output,
showing the surface. In case of a change in the surface's
content-protection, the client associated with that surface is
notified.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
This patch adds the content-protection protocol implementation, to
enable a weston client application to request for content-protection
for its content via HDCP.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
The protection requested for a given surface, must reach through the
weston_surface::pending_state, in the commit-cycle for the
weston_surface, so that it gets updated in the next commit.
As some protection is requested for a given weston_surface, it means
protection must be set for each of the outputs which show the surface.
While setting the protection of a weston_output, care must be taken
so as to avoid, degrading the protection of another surfaces, enjoying
the protection. For this purpose, all the weston_surfaces that are
shown on a weston_output are checked for their desired protection.
The highest of all such desired protections must be set for the
weston_output to avoid degrading of existing protected surfaces.
A surface requesting protection for a lower content-type can still be
provided protection for a higher type but the converse cannot be
allowed.
This patch adds support to set content-protection for a suface, which
inturn sets the content-protection for each of the outputs on which
it is shown, provided, none of the existing surface's protection
request is downgraded.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
The actual protection status for a given weston_head depends upon the
corresponding drm_head's connector HDCP properties. On the other hand,
the actual protection for a weston_output is the minimum of the
protection status of its attached heads.
As a head's protection changes, the current protection of the output
to which the head is attached is recomputed.
This patch adds the support to keep track of the current
content-protection for heads and the outputs.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
For making an output secure, the content-protection should be set for
each of head attached to that output. So whenever the protection for
a weston_output is desired, it means that protection is desired for
each of the weston_head attached to that weston_output.
This patch introduces a new enum in libweston to represent the
requested/current protection statuses, equivalent to the type enum
defined by the weston-secure-output protocol. The new enum helps to
extend the content-protection status and requests to libweston and
the backends.
This patch also adds a new member desired_protection to store the
desired protection for an output in weston_output.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
The xdg-output resources are listed in each head struct. They become idle when
the respective weston_output has been removed again. The client is supposed to
destroy them explicitly afterwards.
After starting an XWayland client xrandr displays the logical size as expected.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
drm_assign_planes() is called to separate views out and decide what will
be taken out for plane composition and what will be left for the
renderer to compose.
It calls drm_output_propose_state() in order to find a good
configuration, which itself has a number of helpers that it calls. Break
these out into a separate file.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Most of the state helpers (create, destroy, duplicate, etc) state, are
relatively straightforward and can live in a separate file.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Create a new file which handles most of the actual KMS API use. This
covers the property handling (in which we map between KMS properties and
our internal representations), as well as actually applying state
through atomic modesetting or the legacy SetCrtc/PageFlip/DPMS APIs.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Create a new file for the DRM backend's handling of output modes, e.g.
resolution, aspect ratio, preferred mode selection, EDID parsing.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Create a helper function which populates a drm_head with the information
extracted from its connector's EDID and any other properties we can
find, such as physical size and connection status.
This is currently quite small, but may become more complex in future as
we parse EDID better. It also prepares to move this function into
another file in the next commit.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Create a new header called drm-internal.h, and move many of drm.c's
declarations and helpers to it.
This will allow us to split the DRM backend into multiple files.
Signed-off-by: Daniel Stone <daniels@collabora.com>
partial_update is an EGL extension which allows us to inform the driver
ahead of time the limits of the areas we'll be writing to. This helps
performance for GPU hardware which renders into a local tile buffer:
informing the driver of the rendering extents means it can avoid
fetching unchanged tiles into the tile buffer and subsequently writing
them out.
The extension complements rather than replaces EGL_EXT_buffer_age (used
before partial_update to know which areas we need to update) and
EGL_KHR_swap_buffers_with_damage (used after partial_update to inform
the winsys of the changed region).
Note however that partial_update deals in buffer-damage regions ('what
has changed since the last time I used _this_ buffer?'), whereas
swap_buffers_with_damage deals in surface-damage regions ('what has
changed since the last time I rendered?'). An explanatory diagram can be
found in the specification:
https://www.khronos.org/registry/EGL/extensions/KHR/EGL_KHR_partial_update.txtFixes: #134
Signed-off-by: Daniel Stone <daniels@collabora.com>
Add some comments in the function to make it clear what's going on,
especially as we twist and turn between a lot of things called 'damage'
meaning different things in different co-ordinate spaces.
Signed-off-by: Daniel Stone <daniels@collabora.com>
The buffer_damage variable stores accumulated damage from previous
frames. This is the area that, before considering our current repaint
request, we need to repaint in order to bring the older buffer up to
date with the last buffer we rendered into.
Rename to previous_damage so it's a bit more clear what this refers to.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Technically it is storing which areas of the border are damaged.
However, we already have damage-region variables which need to be
translated by the border region. Rename the variable to not contain the
word 'damage' to reduce confusion.
Signed-off-by: Daniel Stone <daniels@collabora.com>
eglSwapBuffersWithDamage has to convert a damage region from Weston's
global co-ordinate space, into the co-ordinate space for EGL rendering
into a buffer for that output.
The conversion from the global co-ordinate space in logical pixels to
the output space in buffer pixels is slightly long and error-prone,
involving translating by the output's offset within the global
co-ordinate space, multiplying by output scale, and also translating to
allow for any borders we paint around the output.
After this is done, we need to flip the co-ordinates in the Y axis to
account for the lower-left-origin co-ordinate space used by EGL.
Since we want to reuse this for partial_update, but using a different
source region, extract this conversion into a well-commented helper we
can reuse.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Fan debug mode repaints the whole surface in order to clear any 'trails'
left over from previous fan paints. If this happens, fall back to using
regular eglSwapBuffers rather than eglSwapBuffersWithDamageEXT, since
the damage region we would pass will be too small.
Signed-off-by: Daniel Stone <daniels@collabora.com>
pixel_format_get_info() is already documented in the headers; no need to
also document it next to the code.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Also, add tag symbols related to 'weston_head'.
The bridge between sphinx and doxygen (breathe) has a useful directive:
doxygengroup. By using it we can scoop out symbols we'd like to display
documentation from/of.
At the same time some bits of the code has been using '\memberof' (a
doxygen command useful in C code to establish class like
relationship between objects and functions) but this seems not to be
recognized by the sphinx bridge.
Until we find a better solution, we replace '\memberof' command with
'\ingroup' one as to tag the symbols with an "object". This patch does
that for 'weston_head' object.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
We already have documentation in header which conflicts with the one
the source code. Remove it entirely as it confuses user as well.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
This fixes warnings for weston-debug, input, compositor, log and
linux-explicit-sync. Warnings range from swapping '[in]', '[out]' with
the function arguments to wrong parameter names.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
As of the previous commit, we never create state which uses overlay
planes on non-atomic drivers. We can thus remove the calls to
drmModeSetPlane.
The only time we ever waited for vblank events was when we had called
drmModeSetPlane and needed to make sure we waited until it was active.
We can thus also remove all the vblank event machinery.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Without atomic modesetting, we have no way to know whether or not our
desired configuration is usable. It might fail for a number of reasons:
scaling limits, bandwidth limits, global resource (e.g. decompression)
unit contention, or really just anything.
Not only this, but there is no good way to ensure that our configuration
actually lands together in the same refresh cycle - hence the 'atomic'
in atomic modesetting. Some drivers implement a synchronously blocking
drmModeSetPlane, whereas others return immediately. Using overlay planes
can thus decimate your framerate.
The pre-atomic API is not extensible either, so we need numerous out
clauses: fail if we're cropping or scaling (sometimes), or changing
formats, or fencing, or ...
Now we've had atomic support stable for a couple of releases, just
remove support for doing anything more fancy than displaying our
composited output and a cursor with drivers which don't support atomic
modesetting.
Support for using overlay planes was already disabled by default when
using the legacy API, and required a debug key combination to toggle it
on by flipping the sprites_are_broken variable. We can ensure that we
never try to use it on legacy by simply ignoring the hotkey when in
legacy mode.
Signed-off-by: Daniel Stone <daniels@collabora.com>
By default the client communicates its preference with regards to
compression to the server. However, some clients always use
compression, which is not ideal for certain environments (e.g.
low performance embedded devices in a local network with plenty
of bandwidth). Allow to disable compression server-side which will
override the clients request for compression.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Free command data after all rects have been updated. This fixes a
rather huge memory leak when using the RDP backend.
Signed-off-by: Stefan Agner <stefan@agner.ch>
When using logind launcher, we receive a PauseDevice "gone" message
from logind session management for each device we close while looking
for KMS devices.
Make logind notify the backend of the device add/remove so that the
backend can decide what to do, instead of assuming that if it is a
DRM_MAJOR device the session should be (de)activated. The backend can
then react to its specific device.
Fixes#251
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
A output repaint loop isn't scheduled beacuse the output repaint_status
is AWAITING_COMPLETION when dmps is turned off in update_complete().
Therefore, the display attached to the output is remain inactive even if
weston wakes up. By going through finish_frame, the output
repaint_status is fixed to correct status.
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
Move the DRM-backend into a new sub-directory to make it stand out from
libweston core. This facilitates splitting drm.c into more files later.
vaapi-recorder is used only by DRM-backend, move that too.
libbacklight is used only by DRM-backend and a manual test program, and is
moved as well.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Right now only used by the DRM-backend, but there is a test program that should
use this as well.
This helps with building the test program and moving DRM-backend into a
subdirectory.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Rather than having fbdev and drm backends include the libinput files ad hoc,
wrap them in a static library. Using the dependency object for that helper
library will then automatically pull in any necerray include dirs for the
users.
This helps with moving the backends into subdirectories.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This is no longer needed. Also assert if the context passed is NULL and
compositor log context is already set.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
As we transition towards a more generic API for weston loggging
framework rename weston_debug_compositor to weston_log_context to show
the fact that this is not really debug but a logging context.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
This patch allows initialization of weston-debug/log framework much earlier
than weston_compositor, which in turn will provide the option start
logging before weston_compositor has been created.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
The printf() format specifier "%m" is a glibc extension to print
the string returned by strerror(errno). While supported by other
libraries (e.g. uClibc and musl), it is not widely portable.
In Weston code the format string is often passed to a logging
function that calls other syscalls before the conversion of "%m"
takes place. If one of such syscall modifies the value in errno,
the conversion of "%m" will incorrectly report the error string
corresponding to the new value of errno.
Remove all the occurrences of the specifier "%m" in Weston code
by using directly the string returned by strerror(errno).
While there, fix some minor indentation issue.
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
error() is not posix but gnu extension so may not be available on all
kind of systemsi e.g. musl.
Signed-off-by: Randy 'ayaka' Li <ayaka@soulik.info>
Signed-off-by: Randy Li <randy.li@rock-chips.com>
The documentation of wl_data_offer::finish states that it should be
used to signify that a drag and drop operation is completed. So send
WL_DATA_OFFER_ERROR_INVALID_FINISH when the client calls the finish
request but the operation isn't dnd.
Signed-off-by: Harish Krupo <harishkrupo@gmail.com>
GL-renderer is expected to grow more files, both by addition and by splitting.
Moving them into a new subdirectory helps people to understand which files are
relevant.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This is an internal export for GL-renderer, so that it does not need to build
linux-sync-file.c a second time. This follows the example of
linux-explicit-synchronization.c which is also used by GL-renderer.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Making this into a dependency object not only carries the .c files with it, but
it also brings the include directories as well, which means the users can
simply use the object without guessing the paths.
This should help with moving GL-renderer into a new subdirectory.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This is an installed public header, and without the subdir would surely
conflict with something else.
include/libweston/meson.build is necessary for putting the generated header in
the right subdirectory so that '#include <libweston/version.h>' can work.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
It is a public installed header used by libweston.h.
See "Rename compositor.h to libweston/libweston.h" for rationale.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
It is a public installed header used by libweston.h.
See "Rename compositor.h to libweston/libweston.h" for rationale.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
matrix.h is a public installed header and even used by libweston.h.
See "Rename compositor.h to libweston/libweston.h" for rationale.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
The backend headers are renamed from compositor-foo.h to backend-foo.h to
better describe their purpose. These headers are public libweston API for each
specific backend.
The headers will also be used like
#include <libweston/backend-drm.h>
instead of
#include <compositor-drm.h>
to give them a more explicit namespace.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
The main idea is to make libweston users use the form
#include <libweston/libweston.h>
instead of the plain
#include <compositor.h>
which is prone to name conflicts. This is reflected both in the installed
files, and the internal header search paths so that Weston would use the exact
same form as an external project using libweston would.
The public headers are moved under a new top-level directory include/ to make
them clearly stand out as special (public API).
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This patch sets up the stage for similarly renaming compositor.h which will
justify this. That patch will be big, so moving timeline-object.h first makes
it easy to see the changes to the build and install directives.
This and all the following moves essentially break the API, so libweston major
is bumped.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
These are not specific to the launchers but to compositor.h, so name them that
way.
Once we can rely on the mentioned Meson PR, we can simplify this further.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
With the addition of patch 433f4e77b7 we display the same view id (0)
for every view as we're modifying the local variable.
Displaying sub-surfaces based views is also problematic. The caller need
to modify the view number as well, so we instead we pass the address as
to allow that to happen. Otherwise we end up repeating the same number
for views without sub-subrfaces once those have been printed.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Weston 6.0.0 was released with both autotools and Meson build systems. That
should be enough for downstream to migrate to Meson build on their on pace.
Maintaining two build systems is a hassle, keep the one that is easier to work
with and let the other one go.
doc/dozygen/tool*.doxygen.in are not deleted, because they have not been
integrated with Meson yet.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Copy the damage region to scanout drm_plane_state which will be sent to
kernel during atomic state update.
Signed-off-by: Deepak Rawat <drawat@vmware.com>
The plane property FB_DAMAGE_CLIPS provides a way to mark damaged
regions on the plane in framebuffer coordinates of the framebuffer
attached to the plane.
This patch adds a new member "damage" to compositor version of
drm_plane_state and set FB_DAMAGE_CLIPS property whenever damage is
available.
v2: Rebase, check if plane support FB_DAMAGE_CLIPS property before
setting it.
Signed-off-by: Deepak Rawat <drawat@vmware.com>
All the GBM code is unconditional in compositor-drm.c, so while disabling the
GL-renderer would stop GBM from being used, GBM headers would still be needed
for building and GBM library for linking.
Leave a note to fix it properly later. At least we now check for GBM and do not
mislead with the error message.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Since commit ee1d968e64 ("compositor-drm: Fall back if GBM surface fails with
modifiers"), drm_output_init_egl requires output->gbm_surface to be NULL, or
gbm_surface_create will not be called if HAVE_GBM_MODIFIERS is enabled but no
modifiers are supported by the plane. This could happen if _init_egl is called
after drm_ouptut_fini_egl drom drm_output_switch_mode.
Add an assert to guarantee the requirement and clears the gbm_surface pointer
after the surface is destroyed.
Signed-off-by: Philipp Zabel <p.pzabel@pengutronix.de>
../libweston/compositor-rdp.c: In function ‘rdp_peer_refresh_rfx’:
../libweston/compositor-rdp.c:213:25: error: invalid type argument of unary ‘*’ (have ‘SURFACE_BITS_COMMAND’ {aka ‘struct _SURFACE_BITS_COMMAND’})
memset(&cmd, 0, sizeof(*cmd));
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
If we cannot create a gbm_surface using a list of modifiers, fall back
to using the old pre-modifier version.
This fixes initialisation on systems where KMS supports modifiers but
the GBM driver does not, such as old i915 systems like Pine View using
the unified KMS driver but the old i915 Mesa driver.
Signed-off-by: Daniel Stone <daniels@collabora.com>
If the 'renderer-gl' option is enabled, ENABLE_EGL is defined, and
libweston/pixel-formats.c includes EGL/egl.h. This requires an egl
dependency, as X11-less platforms need the MESA_EGL_NO_X11_HEADERS
define from egl.pc cflags:
In file included from /usr/include/EGL/egl.h:39:0,
from ../libweston/pixel-formats.c:42:
/usr/include/EGL/eglplatform.h:124:10: fatal error: X11/Xlib.h: No such file or directory
compilation terminated.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Better to excercise the current rather than outdated protocol.
Pekka:
- split the patch, rewrote commit message
- rename xdg_shell_ping to xdg_wm_base_ping
- rename xdg_shell_listener to wm_base_listener
- fix continued line alignment
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Make it official that libweston will export the weston_config API, as requested
in https://gitlab.freedesktop.org/wayland/weston/merge_requests/29 .
There is no other way third party helper clients could access the API.
The autotools build has been accidentally exporting it all the time, but the
Meson build needed fixing.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Implement the get_release request of the zwp_surface_synchronization_v1
interface.
This commit implements the zwp_buffer_release_v1 interface. It supports
the zwp_buffer_release_v1.fenced_release event for surfaces rendered by
the GL renderer, and the zwp_buffer_release_v1.immediate_release event
for other cases.
Note that the immediate_release event is safe to be used for surface
buffers used as planes in the DRM backend, since the backend releases
them only after the next page flip that doesn't use the buffers has
finished.
Changes in v7:
- Remove "partial" from commit title and description.
- Fix inverted check when clearing used_in_output_repaint flag.
Changes in v5:
- Use the new, generic explicit sync server error reporting function.
- Introduce and use weston_buffer_release_move.
- Introduce internally and use weston_buffer_release_destroy.
Changes in v4:
- Support the zwp_buffer_release_v1.fenced_release event.
- Support release fences in the GL renderer.
- Assert that pending state buffer_release is always NULL after a
commit.
- Simplify weston_buffer_release_reference.
- Move removal of destroy listener before resource destruction to
avoid concerns about use-after-free in
weston_buffer_release_reference
- Rename weston_buffer_release_reference.busy_count to ref_count.
- Add documentation for weston_buffer_release and ..._reference.
Changes in v3:
- Raise NO_BUFFER for get_release if no buffer has been committed,
don't raise UNSUPPORTED_BUFFER for non-dmabuf buffers,
so get_release works for all valid buffers.
- Destroy the buffer_release object after sending an event.
- Track lifetime of buffer_release objects per commit, independently
of any buffers.
- Use updated protocol interface names.
- Use correct format specifier for resource ids.
Changes in v2:
- Raise UNSUPPORTED_BUFFER at commit if client has requested a
buffer_release, but the committed buffer is not a valid linux_dmabuf.
- Remove tests that are not viable anymore due to our inability to
create dmabuf buffers and fences in a unit-test environment.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Implement the set_acquire_fence request of the
zwp_surface_synchronization_v1 interface.
The implementation uses the acquire fence in two ways:
1. If the associated buffer is used as GL render source, an
EGLSyncKHR is created from the fence and used to synchronize
access.
2. If the associated buffer is used as a plane framebuffer,
the acquire fence is treated as an in-fence for the atomic
commit operation. If in-fences are not supported and the buffer
has an acquire fence, we don't consider it for plane placement.
If the used compositor/renderer doesn't support explicit
synchronization, we don't advertise the protocol at all. Currently only
the DRM and X11 backends when using the GL renderer advertise the
protocol for production use.
Issues for discussion
---------------------
a. Currently, a server-side wait of EGLSyncKHR is performed before
using the EGLImage/texture during rendering. Unfortunately, it's not clear
from the specs whether this is generally safe to do, or we need to
sync before glEGLImageTargetTexture2DOES. The exception is
TEXTURE_EXTERNAL_OES where the spec mentions it's enough to sync
and then glBindTexture for any changes to take effect.
Changes in v5:
- Meson support.
- Make explicit sync server error reporting more generic, supporting
all explicit sync related interfaces not just
wp_linux_surface_synchronization.
- Fix typo in warning for missing EGL_KHR_wait_sync extension.
- Support minor version 2 of the explicit sync protocol (i.e., support
fences for opaque EGL buffers).
Changes in v4:
- Introduce and use fd_clear and and fd_move helpers.
- Don't check for a valid buffer when updating surface acquire fence fd
from state.
- Assert that pending state acquire fence fd is always clear
after a commit.
- Clarify that WESTON_CAP_EXPLICIT_SYNC applies to just the
renderer.
- Check for EGL_KHR_wait_sync before using eglWaitSyncKHR.
- Dup the acquire fence before passing to EGL.
Changes in v3:
- Keep acquire_fence_fd in surface instead of buffer.
- Clarify that WESTON_CAP_EXPLICIT_SYNC applies to both backend and
renderer.
- Move comment about non-ownership of in_fence_fd to struct
drm_plane_state definition.
- Assert that we don't try to use planes with in-fences when using the
legacy KMS API.
- Remove unnecessary info from wayland error messages.
- Handle acquire fence for subsurface commits.
- Guard against self-update in fd_update.
- Disconnect the client if acquire fence EGLSyncKHR creation or wait
fails.
- Use updated protocol interface names.
- User correct format specifier for resource ids.
- Advertise protocol for X11 backend with GL renderer.
Changes in v2:
- Remove sync file wait fallbacks.
- Raise UNSUPPORTED_BUFFER error at commit if we have an acquire
fence, but the committed buffer is not a valid linux_dmabuf.
- Don't put buffers with in-fences on planes that don't support
in-fences.
- Don't advertise explicit sync protocol if backend does not
support explicit sync.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Introduce an internal API for dealing with linux sync files,
and use it in the codebase to replace ad-hoc sync file management.
The linux_sync_file_is_valid function is not currently used, but will be
utilized in upcoming commits to implement the
zwp_linux_explicit_synchronization_unstable_v1 protocol.
Changes in v5:
- Meson support.
Changes in v3:
- Use parameter name in function documentation.
- Move kernel UAPI to separate header file.
Changes in v2:
- Add function documentation
- Remove linux_sync_file_wait()
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Introduce support for the zwp_linux_explicit_synchronization_unstable_v1
protocol with an implementation of the zwp_linux_explicit_synchronization_v1
interface.
Explicit synchronization provides a more versatile notification
mechanism for buffer readiness and availability, and can be used to
improve efficiency by integrating with related functionality in display
and graphics APIs.
In addition, the per-commit nature of the release events provided by
this protocol potentially offers a solution to a deficiency of the
wl_buffer.release event (see
https://gitlab.freedesktop.org/wayland/wayland/issues/46).
Support for this protocol depends on the capabilities of the backend, so
we don't register it by default but provide a function which each
backend will need to call. In this commit only the headless backend when
using the noop renderer supports this to enable testing.
Note that the zwp_surface_synchronization_v1 interface, which contains
the core functionality of the protocol, is not implemented in this
commit. Support for it will be added in future commits.
Changes in v7:
- Added some information in the commit message about the benefits of
the explicit sync protocol.
Changes in v6:
- Fall back to advertising minor version 1 of the explicit sync protocol,
although we support minor version 2 features, until the new
wayland-protocols version is released.
Changes in v5:
- Meson support.
- Advertise minor version 2 of the explicit sync protocol.
Changes in v4:
- Enable explicit sync support in the headless backend for all
renderers.
Changes in v3:
- Use wl_resource_get_version() instead of hardcoding version 1.
- Use updated protocol interface names.
- Use correct format specifier for resource id.
- Change test name to 'linux-explicit-synchronization.weston'
(s/_/-/g).
Changes in v2:
- Move implementation to separate file so protocol can be registered
on demand by backends.
- Register protocol in headless+noop backend for testing purposes.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Since the Meson install step is not written to try to set the suid bit
automatically, remind the user that weston-launch needs to be
setuid-root to work.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
This attempts to wake up secondary framebuffer devices
(/dev/fb1 and up) as usually these devices start powered off, and
the FBIOPUT_VSCREENINFO ioctl turns it on. This was tested on qemu
with two virtual QXL cards. This is a more precise way to activate
framebuffer devices with the ioctl
This will cause gbm_surface_create_with_modifiers to fail on drivers
where modifiers are not yet supported (e.g. amdgpu). We need to make
sure we only end up using gbm_surface_create in this case.
This fixes the remoting plugin on these drivers.
Signed-off-by: Scott Anderson <scott.anderson@collabora.com>
In patch 5d767416c1 we simplified a bit the way in which the
compositing mode was being printed with the purpose to improve
weston-debug. It seems we forgot to use the mode when RENDER-only mode
is being used, so this patch fixes that.
Signed-off-by: Marius Vlad <marius.vlad0@gmail.com>
Add missing drm_plane_state_put_back in case the view's pixel format
does not match any of the tested plane's supported formats.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Helps people avoid wayland-egl if they don't want it.
Makes the check for wayland-egl explicit on the site instead of relying
on gl-renderer checking for it.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Helps people to avoid EGL and GLESv2 if they do not want them.
Stops using dep_egl and dep_glesv2 so that the human friendly error
message is alongside the dependency() statement, so that the message and
the statement can later be merged together once Meson offers the custom
error messages feature or something even more sophisticated.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Make fbdev work with some Android downstream kernels, like the
asus-grouper (Google Nexus 7 2012).
Signed-off-by: Oliver Smith <ollieparanoid@bitmessage.ch>
The 'done' event sent back to client with the weston screenshot interface
is not being sent if there is no damage on the plane. This patch (re-uses just
like recording part) weston_output_damage() to achieve that.
Otherwise the client will have to wait (and be blocked) until some
damage on the plane is being done.
Signed-off-by: Marius Vlad <marius.vlad0@gmail.com>
This fixes the situation when using only plane-state mode for
compositing there's no obvious debug message stating that. This patch
makes it slightly better/easier to dermine what mode the compositor is
using currently.
Signed-off-by: Marius Vlad <marius.vlad0@gmail.com>
This fixes warnings like ``may be used uninitialized''
libweston/compositor-drm.c: In function 'drm_device_is_kms':
libweston/compositor-drm.c:6374:12: warning: 'id' may be used uninitialized in this function [-Wmaybe-uninitialized]
b->drm.id = id;
Signed-off-by: Marius Vlad <marius.vlad0@gmail.com>
Meson is a build system, currently implemented in Python, with multiple
output backends, including Ninja and Make. The build file syntax is
clean and easy to read unlike autotools. In practise, configuring and
building with Meson and Ninja has been observed to be much faster than
with autotools. Also cross-building support is excellent.
More information at http://mesonbuild.com
Since moving to Meson requires some changes from users in any case, we
took this opportunity to revamp build options. Most of the build options
still exist, some have changed names or more, and a few have been
dropped. The option to choose the Cairo flavour is not implemented since
for the longest time the Cairo image backend has been the only
recommended one.
This Meson build should be fully functional and it installs everything
an all-enabled autotools build does. Installed pkg-config files have
some minor differences that should be insignificant. Building of some
developer documentation that was never installed with autotools is
missing.
It is expected that the autotools build system will be removed soon
after the next Weston release.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Co-authored-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Pekka Paalanen <pq@iki.fi>
In current form SHM buffers pixel format can only be printed as 0 and 1.
With the help of this helper we align with DRM_FORMAT_ pixel format.
Signed-off-by: Marius Vlad <marius.vlad0@gmail.com>
Use the pixel format table to parse format names. This makes the parser
recognize almost all DRM format names.
Not all formats are usable, but we rely on the use to fail
appropriately. What we can use depends on the drivers anyway.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Add a function to find a format description by the DRM format name. This
will be useful when parsing configuration strings.
While at it, fix the two function formattings in pixel-formats.h to
match everything else in the file.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
There is often a need to print the name of a pixel format. Printing the
raw numeric value is hard to decipher, printing the four ASCII
characters is slightly more human-friendly but still needs a decoder
table. Add a name that can be printed easily.
The bulk of this patch was done with:
sed -i -e 's/\.format = DRM_FORMAT_\(.\+\),/DRM_FORMAT(\1),/' libweston/pixel-formats.c
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Introduce a helper function to disconnect the client on unhandled
buffer types, and use it in the gl and pixman renderers. The function
is modeled after linux_dmabuf_buffer_send_server_error.
Also print the egl error state in the gl renderer, in case the
unrecognized buffer error happens when querying an egl buffer.
https://gitlab.freedesktop.org/wayland/weston/issues/148
Add support virtual output for streaming image to remote output by
remoting-plugin which will be added by the patch:
"Add remoting plugin for output streaming."
The gbm bo of virtual output is the linear format.
Virtual output is implemented based on a patch by Grigory Kletsko
<grigory.kletsko@cogentembedded.com>.
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
Store usage flags of gbm bo in drm_output in order to specify the bo
format for each output. A following patch will add a new type of
drm_output which requires different gbm_bo_flags.
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
